Search

Dry or powdered formulations of food additives facilitate transportation, storage, preservation and handling. In this work, dry formulations of bacterial cellulose and carboxymethyl cellulose (BC:CMC), easily redispersible and preserving the functionality of the never-dried dispersions are reported. Different processing parameters and their effect on the materials properties were evaluated, namely: (i) wet-grinding of BC (Hand-blender, Microcut Head Impeller, High-pressure Homogenizer), (ii) drying of BC:CMC mixtures (fast drying at130 °C and slow drying at 80 °C) and subsequent (iii) comminution to different particle sizes. The dispersibility of the obtained BC:CMC powders was evaluated, and their functionality after redispersion was assessed by measuring the dynamic viscosity, the effect in oil/water interfacial tension (liquidliquid system) and the stabilization of cocoa in milk (solidliquid system). The size of BC fibre bundles was of paramount relevance to its stabilizing ability in multiphasic systems. A more extensive wet-grinding of the BC fibres was accompanied by a loss in the BC:CMC functionality, related to the increasingly smaller size of the BC bundles. Indeed, as the Dv (50) of the wet BC bundles was reduced from 1228 to 55 µm, the BC:CMC viscosity profile dropped and the effect on interfacial tension decreased. This effect was observed both on the never-dried and dry BC:CMC formulations. On the other hand, the drying method did not play a major effect in the materials properties. In a benchmarking study, the BC:CMC formulations, at a low concentration (0.15%), had better stabilizing ability of the cocoa particles than several commercial cellulose products., Electronic supplementary material The online version of this article (https://doi.org/10.1007/s10570-020-03211-9) contains supplementary material, which is available to authorized users., This study was supported by FCT under the scope of the strategic funding of UID/BIO/04469/2019 unit and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020-Programa Operacional Regional do Norte. Daniela Martins also gratefully acknowledges FCT for the PhD scholarship, reference SFRH/BD/115917/2016., info:eu-repo/semantics/publishedVersion

A new strategy for the surface modification of bacterial cellulose (BC) through the combination of oxygen plasma deposition and silanization with trichloromethyl silane (TCMS) is described. The combined use of the two techniques modifies both the surface roughness and energy and therefore maximizes the obtained hydrophobic effect. These modified membranes were characterized by Scanning Electron Microscopy (SEM), water contact angle measurements, Fourier-transform infrared spectroscopy (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS), and its cytotoxic potential was investigated using both indirect and direct contact in vitro studies. The obtained results suggest an effective conjugation of TCMS to the surface of BC, leading to a highly hydrophobic surface, with a water contact angle of approximately 130º. It is also demonstrated that this is a stable and durable surface modification strategy, since BC remained hydrophobic even after 6 months, in dry conditions or after being submerged in distilled water for about a month. Importantly, this surface modification revealed no short-term cytotoxic effects on L929 and hDNFs cells. Altogether, these data indicate the successful development of a surface modification method that can be applied to BC, enabling the production of a biodegradable and hydrophobic platform that can be applied to different areas of research and industry., This work was supported by the Fundação para a Ciência e a Tecnologia (FCT), under the project ‘‘SkinChip: Disruptive cellulose-based microfluidic device for 3D skin modelling’’ (PTDC/BBB-BIO/1889/2014, SFRH/BPD/121526/2016), co-financed by the Lisboa 2020, COMPETE 2020, Portugal 2020 and the BioTecNorte operation (NORTE01-0145-FEDER-000004) with funding by the European Regional Development Fund under the scope of Norte2020— Programa Operacional Regional do Norte., info:eu-repo/semantics/publishedVersion

In this work, films based on bacterial cellulose nanofibers (BCNFs) incorporating gelatin hydrolysate (GH) from tilapia skin were produced. The effect of plasticizer (sorbitol or glycerol) and GH incorporation was evaluated on the physicalchemical and optical properties of films. BCNFs were produced using bacterial cellulose obtained from Hestrin and Schramm (HS) medium (BCNF-HS) or cashew apple juice (BCNF-CM), which was studied as an alternative to HS. Films with sorbitol showed the best properties and were selected for further characterization, using 40% (w/w) of BCNF-HS, 40% (w/w) of GH and 20% (w/w) of sorbitol (BCNF-HS-S-GH films). These films exhibited an antioxidant activity of 7.8 µmols Trolox Eq/g film, a water vapor permeability (WVP) of 1.6 g.mm/kPa.h.m2 and an Youngs modulus of 0.57 GPa. Films produced with BCNFs obtained from cashew apple juice revealed enhanced tensile strength, elongation at break, and thermal stability. Caco-2 cells viability after incubation with BCNF-based films incorporating GH was evaluated and showed non-cytotoxicity, reinforcing the safety of the developed materials and their potential use in food applications., The authors would like to thank: Foundation of Support to the Scientific and Technological Development (FUNCAP, Brazil), Coordination for the Improvement of Higher Education Personnel (CAPES, Brazil), National Counsel of Technological and Scientific Development (CNPq, Brazil), Minho University (Braga, Portugal) and International Iberian Nanotechnology Laboratory (Braga, Portugal). This work was funded by research projects CNPq n 485465/2012-4, CNPq n 310368/2012-0 and CNPq n 476978/2013-0. Funding from Fundac¸a ˜o para a Cie ˆncia e Tecnologia through the project ‘‘Bacterial Cellulose: a platform for the development of bionanoproducts’’, under the bilateral program FCT/CAPES, is acknowledged. The authors acknowledge also the funding from QREN (‘‘Quadro de Referência Estratégica Nacional’’), ADI (‘‘Agência de Inovação’’) through the project Norte-070202-FEDER-038853, and BioTecNorte operation (NORTE01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020—Programa Operacional Regional do Norte. This research was supported by Norte Regional Operational Program 2014–2020 (Norte2020) through the European Regional Development Fund (ERDF) Nanotechnology based functional solutions (NORTE-01-0145FEDER-000019)., info:eu-repo/semantics/publishedVersion

A method for the gram-scale production of cellulose-binding domains (CBD) through the proteolytic digestion of a commercial nzymatic preparation (Celluclast) was developed. The CBD obtained, isolated from Trichoderma reesei cellobiohydrolase I, is highly pure and heavily glycosylated. The purified peptide has a molecular weight of 8.43 kDa, comprising the binding module, a part of the linker, and about 30% glycosidic moiety. Its properties may thus be different from recombinant ones expressed in bacteria. CBDfluorescein isothiocyanate conjugates were used to study the CBD-cellulose interaction. The presence of fluorescent peptides adsorbed on crystalline and amorphous cellulose fibers suggests that amorphous regions have a higher concentration of binding sites. The adsorption is reversible, but desorption is a very slow process., Fundação para a Ciência e a Tecnologia (FCT)