Search

Developing a high-performance activator is crucial for the practical application of peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). High-entropy oxides (HEOs) have attracted increasing attention due to their stable crystal structure, flexible composition and unique functionality. However, research into the mechanisms by which HEOs function as PMS activators for degrading organic pollutants remains insufficient, and the relationship between entropy and the catalytic performance of HEOs has yet to be clarified. In this study, we synthesized NiMgZnCuCoO x with different levels of entropy as PMS activators for acetaminophen (APAP) degradation, and observed a significant effect for entropy on the catalytic performance. Sulfate radicals (SO 4 • ‒ ) were identified as the primary reactive oxygen species (ROS), while hydroxyl radicals (•OH) and singlet oxygen ( 1 O 2 ) act as secondary ROS during APAP degradation. Both the Co 2+ contents and the oxygen vacancy concentration in NiMgZnCuCoO x are found to increase with the entropy. An increase in the Co 2+ sites leads to more activation sites for PMS activation, while excessive oxygen vacancies consume PMS, producing weak oxidation species, and affect the electron-donating ability of Co 2+ . Consequently, the NiMgZnCuCoO x with middle level of entropy exhibits the optimal performance with APAP degradation rate and mineralization rate reaching 100% and 74.22%, respectively. Furthermore, the degradation intermediates and their toxicities were assessed through liquid chromatography-mass spectrometry and quantitative structure-activity relationship analysis. This work is expected to provide critical insight into the impact of the HEOs entropy on the PMS activation and guide the rational design of highly efficient peroxymonosulfate activators for environmental applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Microplastics (MPs), as emerging pollutants, have attracted the attention of environmentalists, statespersons, and the scientific community over the last few decades. To address the spread of MPs in the environment, it is imperative to develop various removal techniques and materials that are effective, scalable, and ecologically benign. However, to the best of our knowledge, no review has systematically examined the removal of MPs using adsorption or provided an in-depth discussion on various adsorbents. Adsorption is an inexpensive and effective technology for wastewater treatment. Recently, many researchers have conducted studies on MP remediation using diverse adsorbent materials, such as biochar, activated carbon, sponges, carbon nanotubes, metal-layered oxides, metal-organic frameworks (MOFs), and zeolites. Each adsorbent has advantages and disadvantages. To overcome their disadvantages, researchers have been designing and developing hybrid adsorbents for MP remediation. This review provides insights into these individual adsorbents and also discusses hybrid adsorbents for MP removal. Finally, the review elaborates on future possibilities and ways to enable more efficient, scalable, and environmentally friendly MP cleanup. Overall, this review bridges the gap between contemporary MP remediation using adsorption techniques and adsorbent development., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Recycled PET (rPET) is gaining popularity for use in the production of new food contact materials (FCMs) under the context of circular economy. However, the limited information on contaminants in rPET from China and concerns about their potential risk are major obstacles to their use in FCM in China. Fifty-five non-volatile compounds were tentatively identified in 126 batches of hot-washed rPET flakes aimed for food packaging applications in China. Although the 55 substances are not necessarily migratable and may not end up in the contacting media, their presence indicates a need for proper management and control across the value chain. For this reason, the 55 substances prioritized on the basis of level of concerns and in-silico genotoxicity profiler. Among them, dimethoxyethyl phthalate, dibutyl phthalate, bis(2-ethylhexyl) phthalate were classified as level V substances, and Michler's ketone and 4-nitrophenol were both categorized as level V substances and had the genotoxic structure alert, while 2,4,5-trimethylaniline was specified with genotoxic structure alert. The above substances have high priority and may pose a potential risk to human health, therefore special attention should be paid to their migration from rPET. Aside from providing valuable information on non-volatile contaminants present in hot-washed rPET flakes coming from China, this article proposed a prioritization workflow that can be of great help to identify priority substances deserving special attention across the value chain., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

In modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles to PSAs improves their sustainability and strength, nanocomposite PSAs has gained significant attention for wastewater treatment in the past decade. This review presents a comprehensive analysis of PSA-based nanocomposites used for efficient wastewater treatment, focusing on adsorption, photocatalysis, and membrane-based methods. It also discusses potential future applications, challenges, and opportunities in adsorption, filtration, and photocatalysis. Recently, PSAs have shown promise as adsorbents in biological-based systems, effectively removing heavy metals that could hinder microbial activity. Cellulose-mediated adsorbents have successfully removed various pollutants from wastewater, including heavy metals, dyes, oil, organic solvents, pesticides, and pharmaceutical residues. Thus, PSA nanocomposites would support biological processes in wastewater treatment plants. A major concern is the discharge of antibiotic wastes from pharmaceutical industries, posing significant environmental and health risks. PSA-mediated bio-adsorbents, like clay polymeric nanocomposite hydrogel beads, efficiently remove antibiotics from wastewater, ensuring water quality and ecosystem balance. The successful use of PSA-mediated bio-adsorbents in wastewater treatment depends on ongoing research to optimize their application and evaluate their potential environmental impacts. Implementing these eco-friendly adsorbents on a large scale holds great promise in significantly reducing water pollution, safeguarding ecosystems, and protecting human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Single-atom catalysts have been proved to be an effective material for the removal of organic pollutants from water and wastewater, and yet, the relationship between their internal structures and their roles still remains elusive. In this work, a catalyst Fe (MIL)-SAC with single-atom Fe-N 4 active site was prepared. Fe (MIL)-SAC/Peroxydisulfate (PDS) system was able to achieve complete degrade of the Sulfamethoxazole (SMX) with k obs at 0.466 min -1 , which was faster than the Fenton system under the same conditions (k obs  = 0.422 min -1 ) and 16 times faster than Fe (MIL) (k obs  = 0.029 min -1 ). Density functional calculations reveal that the Fe-N 4 structure will affect the electron transport path and lead to selective generation of 1 O 2 by triggering S-O breakage and O-O polarization in PDS. Furthermore, Fe (MIL)-SAC/PDS system exhibits strong resistance to common influencing factors and has good application prospects. This work provides a new approach for the selectively generation of 1 O 2 for the efficient treatment of organic pollutants in aqueous environment., Competing Interests: Declaration of competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Conductive materials have been demonstrated to enhance sludge methanogenesis, but few researches have concentrated on the interaction among conductive materials, microorganisms and their immediate living environment. In this study, Fenton iron mud with a high abundance of Fe(III) was recycled and applied in anaerobic reactors to promote anaerobic digestion (AD) process. The results show that the primary content of extracellular polymeric substances (EPS) such as polysaccharides and proteins increased significantly, possibly promoting microbial aggregation. Furthermore, with the increment of redox mediators including humic substances in EPS and Fe(III) introduced by Fenton iron mud, the direct interspecies electron transfer (DIET) between methanogens and interacting bacteria could be accelerated, which enhanced the rate of methanogenesis in anaerobic digestion (35.21 ± 4.53% increase compared to the control). The further analysis of the anaerobic microbial community confirmed the fact that Fenton iron mud enriched functional microorganisms, such as the abundance of CO 2 -reducing (e.g. Chloroflexi) and Fe(III)-reducing bacteria (e.g., Tepidimicrobium), thereby expediting the electron transfer reaction in the AD process via microbial DIET and dissimilatory iron reduction (DIR). This work will make it possible for using the recycled hazardous material - Fenton iron mud to improve the performance of anaerobic granular sludge during methanogenesis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The landfilling of paper mill sludge (PMS) has been restricted or even banned in many countries due to the raised concern about greenhouse gas (GHG) emissions and contamination of the soil and water, calling for a sustainable PMS management approach. The potential valorization of PMS to nanomaterials combined with traditional biorefinery was examined in this work. Three types of PMS-derived cellulose nanofibrils (CNFs) were prepared and evaluated: enzymatically assisted CNF (AU: with in-house produced enzyme and CT: with commercial enzyme), mechanically pretreated CNF (BT), and chemically pretreated CNF by TEMPO oxidation (TEMPO). It was found that enzyme-assisted mechanical fibrillation-derived CNFs had a comparable average diameter (27.9 nm for AU and 22.7 nm for CT) with that produced from mechanical pretreatment (26.5 nm for BT) and TEMPO oxidation pretreatment (20.0 nm for TEMPO), and they showed the best drainage properties among the three types of CNF. The CNFs resulting from enzymatic pretreatment reduced 15% of energy consumption compared to the mechanical method and had better thermostability than TEMPO oxidation method. In addition, the on-site produced enzyme showed similar performance to the commercial enzymes towards the CNF properties. These findings provide new insights into a promising integrated strategy in engineering CNF from PMS with on-site enzyme production as a novel and sustainable approach for PMS management and valorization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Efficient biocoagulants/bioflocculants are desired for removal of Microcystis aeruginosa, the dominant harmful bloom-forming cyanobacterium. Herein, we reported cationic hydroxyethyl cellulose (CHEC) inactivated M. aeruginosa cells after forming coagulates and floating-flocculated them with aid of Agrobacterium mucopolysaccharides (AMP) and surfactant. CHEC exhibited cyanocidal activity at 20 mg/L, coagulating 85% of M. aeruginosa biomass within 9 h and decreasing 41% of chlorophyll a after 72 h. AMP acted as an adhesive flocculation aid that accelerated and strengthened the formation of flocs, approaching a maximum in 10 min. Flocs of M. aeruginosa were floated after foaming with cocoamidopropyl betaine (CAB), which facilitated the subsequent filter harvest. 82% of M. aeruginosa biomass was suspended on water surface after treated with the coagulation/flocculation-flotation (CFF) agents containing CHEC (25 mg/L), AMP (177 mg/L) and CAB (0.1 mg/L). All components in CFF agents at the applied concentrations did not inhibit acetylcholinesterase or Vibrio fischeri. Our findings provide new insights in developing bio-based materials for sustainable control of cyanobacterial blooms., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

As a typical advanced oxidation process, Fe 2+ -persulfate (PDS) oxidation technology has been widely and efficiently reported for enhancing sludge dewaterability. However, higher dosage of Fe 2+ must be added, which will restrain the oxidation efficiency of Fe 2+ -PDS process. In this work, the oxalic acid (OA)/Fe 2+ -PDS process was studied to improve paper sludge dewatering. With the OA dosage of 6 μmol (g total solid (TS)) -1 , Fe 2+ dosage of 0.3 mmol (g TS) -1 , and PDS dosage of 0.6 mmol (g TS) -1 , sludge dewaterability was improved more efficiently. The specific resistance to filtration and water content of sludge cake were decreased by 70.7% and 8.0%, respectively. In comparison with Fe 2+ -PDS process, the viscosities of sludge suspension and supernatant were further reduced by 3.73% and 51.77%, respectively, and the contents of extracellular polymeric substances fractions were increased. The improved sludge dewaterability in OA/Fe 2+ -PDS process was mainly contributed by the synergistic effect of oxidative disintegration by free radicals and flocs re-flocculation, the contributions of which were the orders: metal cations > sulfate radical > hydroxyl radical. OA enhanced the efficient disintegration of sludge flocs, released more bound water, generated more Fe 3+ -oxalate complexes, and finally increased the sludge particle size significantly, forming a larger aggregation and obvious cracks. Additionally, the stabilization of several heavy metals was improved due to the chelating capacity of OA. These works will provide a novel approach for sludge dewatering in the PDS oxidation process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This study aimed to determine the efficacy of novel ultrafiltration and mixed matrix membrane (MMM) composed of hydrous manganese oxide (HMO) and silver nanoparticles (Ag-NPs) for the removal of biological oxygen demand (BOD) and chemical oxygen demand (COD). In the polycarbonate (PC) MMM, the weight percent of HMO and Ag-NP has been increased from 5% to 10%. A neural network (ANN) was used in this study to compare PC-HMO and Ag-NP. MMM was evaluated in combination with HMO and Ag-NP loadings in order to assess their effects on pure water flux, mean pore size, porosity, and efficacy in removing BOD and COD. HMO and Ag-NPs can decrease membrane porosity in the casting solution while increasing mean pore size. According to the study's findings, the artificial neural network model appears to be highly appropriate for predicting the removal of BOD and COD. To develop a successful model, a suitable input dataset was selected, which consisted of BOD and COD. An ideal model architecture for MMM was proposed based on an optimal number of hidden layers (2 layers) and neurons (5-8 neurons). Experiments and predicted data show a strong correlation between the developed models. BOD was predicted with an excellent R2 and a low root mean square error (RMSE) of 0.99 and 0.05%, respectively, while COD was predicted with an excellent R2 and a low RMSE of 0.99 and 0.09%, respectively. Based on the results, Ag-NP was found to be an excellent candidate for the preparation of MMMs as well as convenient for the removal of BOD and COD from polluted water sources., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In this work, the method of in-situ co-precipitation was used to prepare PVA/CNF/Fe 3 O 4 hybrid hydrogel, and the relationship between its structure and performance was explored. The Fe 3 O 4 NPs prepared by this method were dispersed on the carrier PVA/CNF hydrogel and were easy to recover. The catalytic degradation of tetracycline was investigated using PVA/CNF/Fe 3 O 4 hybrid hydrogel as photo-Fenton catalysts. The results showed that light and hydrogel carriers were pivotal factors in promoting Fe 2+ and Fe 3+ cycling and that the PVA/CNF/Fe 3 O 4 hybrid hydrogel as catalysts were able to activate H 2 O 2 to generate a large amount of oxygen radical •OH, resulting in efficient removal of tetracycline. The tetracycline degradation followed a proposed first-order kinetic model and achieved a removal rate of about 98% in 120 min at an optimum pH of 3, H 2 O 2 100 mM, catalyst 0.3 g/L, and a temperature of 25 °C., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

A modified biological-integrated electrocoagulation method was explored to treat municipal wastewater (MWW) for irrigation purposes. To use treated wastewater for irrigation purposes a wide range of contaminants removal was focused on in this study (turbidity, hardness, conductivity, TDS, TSS, chloride, Ammonia nitrogen, BOD, COD, and total coliform). Raw municipal wastewater (RMWW) was treated in a modified Bio-Electrocoagulation (BEC) cell. The cell was operated in a continuous flow mode and consisted of an electrocoagulation stage using aluminum (Al) electrodes followed by a bioremediation stage using a fixed bio-filter (BF), the design of the cell was further modified by the addition of a sand filter (SF). The effect of several parameters such as applied voltage (22, 26, and 30 V), inlet flow rate (1, 3, and 5 Lh -1 ), and initial pH (pH 3, 5, 7, 7.4, and 9) was investigated to determine the optimum operating conditions for selected responses. The most effective operating conditions for the BEC were investigated for the different irrigation water quality (WQ) indicators. It was observed that pH 7.4 and 26 V provide maximum removal efficiency of contaminants at the flow rate of 1 Lh -1 . A fixed film BF plays a positive role to improve the degradation of contaminants after the EC unit up to 4% of NH 3 -N, 9.3% of BOD, and 7.8% of COD. In addition, using the SF improved the turbidity removal to 42.6%. The WQ specifications of the treated MWW using the BEC cell were compared with the standard specifications for restricted and unrestricted agricultural irrigation water. The overall operating cost of MWW treatment for irrigation purposes by using a modified bio-integrated electrocoagulation method was 0.76 $m -3 ., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2022. Published by Elsevier Ltd. All rights reserved.)

The narrow light-response range and high electron/hole recombination rate greatly restrict the widespread use of photocatalytic technology. The integration of exposing dominant facet of semiconductor and Z-scheme heterostructures designing is expected to break those barriers. Herein，In this work, hydrothermal and ultrasonic stirring methods were used to selectively exposed the (001) and (110) facet of BiOI to construct the BiOI/CdS heterostructures. The obtained BiOI(001)/CdS material shown the maximum degradation for tetracycline-based antibiotics (Oxytetracycline, Tetracycline and Doxycycline), and excellent reduction of hexavalent chromium. Combining the electron spin resonance and scavenger experiments, the superior photocatalytic capacity was attributed to the generation of superoxide and hydroxyl radicals. DFT calculation results shown BiOI(001)/CdS performed high binding energy and adsorption energy for hexavalent chromium, and the different work function between BiOI(001) and CdS confirmed the building of internal electric field, thereby increased the charge separation. Finally, the Gaussian 09 and HPLC-MS program investigated the attack sites of free radicals and degradation pathways in the degradation of antibiotics. This study not only provides a potential photocatalyst, also gives an in-depth understanding of the photocatalytic properties of heterojunctions constructed by different exposed crystal facets., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Developing new and efficient technologies for environmental remediation is becoming significant due to the increase in global concerns such as climate change, severe epidemics, and energy crises. Air pollution, primarily due to increased levels of H 2 S, SO x , NH 3 , NO x , CO, volatile organic compounds (VOC), and particulate matter (PM) in the atmosphere, has a significant impact on public health, and exhaust gases harm the natural sulfur, nitrogen, and carbon cycles. Similarly, wastewater discharged to the environment with metal ions, herbicides, pharmaceuticals, personal care products, dyes, and aromatics/organic compounds is a risk for health since it may lead to an outbreak of waterborne pathogens and increase the exposure to endocrine-disrupting agents. Therefore, developing new and efficient air and water quality management systems is critical. Metal-organic frameworks (MOFs) are novel materials for which the main application areas include gas storage and separation, water harvesting from the atmosphere, chemical sensing, power storage, drug delivery, and food preservation. Due to their versatile structural motifs that can be modified during synthesis, MOFs also have a great promise for green applications including air and water pollution remediation. The motivation to use MOFs for environmental applications prompted the modification of their structures via the addition of metal and functional groups, as well as the creation of heterostructures by mixing MOFs with other nanomaterials, to effectively remove hazardous contaminants from wastewater and the atmosphere. In this review, we focus on the state-of-the-art environmental applications of MOFs, particularly for water treatment and air pollution, by highlighting the groundbreaking studies in which MOFs have been used as adsorbents, membranes, and photocatalysts for the abatement of air and water pollution. We finally address the opportunities and challenges for the environmental applications of MOFs., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Water is a valuable natural resource, which plays a crucial role in ecological survival as well as economic progress. However, the water quality has deteriorated in recent years as a result of urbanization, industrialization and human activities due to the uncontrolled release of industrial wastes, which can be extremely carcinogenic and non-degradable, in air, water and soil bodies. Such wastes showed the presence of organic and inorganic pollutants in high dosages. Heavy metals are the most obstinate contaminants, and they can be harmful because of having a variety of detrimental consequences to the ecosystem. The existing water treatment methods in many situations may not be sustainable or effective because of their high energy requirements and ecological impacts. In this review, state-of-the-art water treatment methods for the elimination of heavy metals with the help of protein nanofibrils are covered featuring a discussion on the strategies and possibilities of developing protein nanofibrils for the active elimination of heavy metals using kitchen waste as well as residues from the cattle, agriculture, and dairy industries. Further, the emphasis has been given to their environmental sustainability and economical aspects are also discussed., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Over the previous three decades, the worldwide use of pharmaceuticals has surged by more than 2.5 times. Although being considered essential to save many lives, pharmaceuticals have also emerged as a large source of complex environmental contaminants in recent decades. Consequently, the pharmaceuticals and their breakdown products are ending up into the water bodies thus progressively contaminating them and the surrounding environments. Based on recent studies concentrations in water sources are typically >0.1 μg/l and the concentration in treated water is typically >0.05 μg/l. These pharma drugs are removed from aquatic systems by processes such as oxidation, Ultraviolet degradation, reverse osmosis and nano-filtration. However, hazardous sludge creation, incomplete removal, expensive capital and operating costs, and the need for professional operating and maintenance personnel have all limited the economic sustainability of these systems. As a result, the presence of pharmaceuticals in water necessitates even more advanced technologies of purification to harvest clean water, yet present approaches are constrained by their high costs, low reusability, and disposal issues. Here, we review sustainable adsorbents for the removal of pharmaceuticals from wastewater. In this comprehensive review, an evaluation of water contamination caused by pharmaceutical compounds is discussed. An overview of current research on the employment of sustainable adsorbents for the removal of the major pharmaceuticals prevalent in water sources. Numerous aspects of high adsorption efficiencies of these pharmaceutical compounds with such sustainable adsorbents were observed; however, other factors, such as adsorbent regeneration and cost evaluation, must be taken into account in order to assess the true applicability of adsorbents., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Biochar (C) applied in synthesizing photocatalysts to eliminate water pollution has been intensively investigated. Herein we report the first use of biochar pyrolyzed from food wastes at 400  ° C (400C) and 700  ° C to construct C/BiOBr composites via a facile hydrolysis approach. Photocatalytic performances could be significantly improved by choosing the appropriate carbonization temperature and adjusting the content of C in C/BiOBr composites. The prepared 1%400C/BiOBr exhibited the best photodegradation capacity towards methylene orange (20 mg/L) and tetracycline (50 mg/L). A series of characterization results illustrated that smooth structure and surface properties (oxygen functional groups and persistent free radicals) of 400C played an important role in enhancing the photocatalytic activities. Mechanism exploration suggested that h + and ˙O 2 - were the main active species thus contributing to photodegradation. This study provided a new insight into utilization of biochar derived from food wastes in photocatalysis and environmental remediation., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Research on low-cost bio-adsorbents for the removal of harmful substances from effluents has recently attracted significant attention. In this study, three types of amino-silane-modified lignins (ASLs) with primary, secondary, and tertiary amine groups were prepared, and their adsorption behavior toward cationic and anionic dyes was investigated. Chemical structural analyses indicated that the three amino-silane reagents resulted in different molecular self-assembly structures on the lignin surface. The ASLs exhibited enhanced thermal stabilities and increased surface areas with different surface charges in different pH ranges. Owing to the high density of primary, secondary, and tertiary amine groups, the ASLs exhibited excellent adsorption capacities for cationic and anionic dyes. Additionally, they selectively adsorb anionic and cationic dyes according to the pH conditions. The ASL with primary amine had the highest adsorption capacity for Methylene blue and Congo red, reaching 187.27 and 293.26 mg·g -1 , respectively, followed by ASLs with the secondary amine and tertiary amine. All adsorption processes followed the Langmuir and Temkin isotherms and had pseudo-second-order kinetics. The hypothesized adsorption mechanism mainly involves electrostatic interaction, NH-π interaction, hydrogen bonding interaction and π-π interaction., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Heavy metal ions (HMI) have attracted worldwide concern due to their serious environmental pollution which led to the risk of health conditions. From Red Malus floribunda fruits, nitrogen-doped carbon dots (N-CDs) were prepared, followed by hybrid-spherical shaped hydrogel particles (CGCDs) were prepared. The prepared CGCDs were utilized as adsorbents for HMI-(Hg(II), Cd(II), Pb(II), and Cr(III)) from water. N-CDs with about 4.0 nm in diameter were characterized by various techniques such as field emission-scanning electron microscopy (FE-SEM) and attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR) that confirm the presence of nitrogen, oxygen, and carbon functionalities. The prepared spherical CGCDs were characterized very well before it was used as HMI adsorbents. The sizes of the CGCDs were ranges between 20 and 300 μm and the degree of swelling was calculated as 1320 %. ATR-FTIR and X-ray diffraction analyses reveal the presence of N-CDs in CGCDs. Further, FE-SEM confirms the spherical shape morphology of CGCDs. Three different concentrations of HMI solutions were 500 mg/L, 1000 mg/L, and 1500 mg/L. Hg(II) adsorbed proficiently by CGCDs in single metal ion systems with ~72 % and almost complete removal of Hg(II) ions (99 %) in multiple metal ion systems was observed. Moreover, all metal ions Hg(II), Cd(II), Pb(II), and Cr(III) were efficiently (>70 %) removed in multiple systems by CGCDs. After HMI adsorption experiments, the elemental mapping from FE-SEM and X-ray photoelectron spectroscopy studies conveys the presence of HMI on CGCDs. This suggests that CGCDs would be a suitable adsorbent for the simultaneous removal of multiple HMI from wastewater., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The aim of the study was to use black liquor produced during the soda pulping process in a pulp and paper mill to increase methane production during pulp and paper industry sludge treatment and decrease the treatment cost. The effects of black liquor on sludge solubilization and methane production were assessed and the economic feasibility of the process was evaluated. Black liquor and NaOH were found to be equivalent in the thermochemical pretreatment process to solubilize sludge and disintegrate flocs. However, adding black liquor increased the background chemical oxygen demand and volatile fatty acid concentration and increased the amount of methane produced by approximately 7-30%. A start-up delay was emphasized by first-order kinetics model due to black liquor addition while methane production remained stable. Economic assessments of five scenarios were performed. It was found to be economically feasible to use black liquor to replace NaOH for the thermal pretreatment process. The surplus methane generated suggested that co-digestion of sludge and black liquor allows surplus bioenergy to be produced during the thermochemical pretreatment anaerobic digestion process., (Copyright © 2021 Elsevier Ltd. All rights reserved.)