Search

Three new sterically demanding ligands based on the bispyrazolylacetic acid motif have been prepared and complexes with Fe(II), Fe(III), Ni(II) and Mn(II) have been synthesised and characterised. Single crystal X-ray structures are included for two of the ligands in the protonated form and ten other complexes. Additionally, a new general route to amide derivatives has been established, a range of amide derivatives synthesised and their coordination chemistry investigated. Only one metal complex was synthesised from the amide ligands, and was bound via the hydroxylamine groups in preference to the pyrazole and carboxylate donor set.

Stable annulated diaminocarbene ligands 7,9-bis(2,4,6-trimethylphenyl)-6b,9a-dihydroace naphtha[1,2-d]imidazolin-2-ylidene and 7,9-bis(2,6-diisopropylphenyl)-6b,9a-dihydroacenaphtho[1,2-d]imidazolin-2-ylidene; designated as (BIAN-SIMes, 5a,) and (BIAN-SIPr, 5b), respectively, have been prepared. The base dependent decomposition of imidazolinium salts via ring opening at the backbone was also observed. The corresponding rhodium(I) and iridum(I) complexes (4-1,5-COD)M(BIAN-SIMes)Cl and (4-1,5-COD)M(BIAN-SIPr)Cl; M= Rh (6a, 6b) and Ir (7a, 7b) have been synthesised by the reaction of free carbene with [M(4-1,5-COD)(-Cl)]2; where M= Rh, Ir. The cationic Ir(I) complexes [(4-1,5-COD)Ir(BIAN-SIMes)Py]BF4 8a and [(4-1,5-COD)Ir(BIAN -SIPr)Py]PF6 8b have also been synthesised. Compounds 4b, 5a, 6a, 6b, 7b and 8b have been structurally characterised. The catalytic activities for the rhodium(I) complexes 6a and 6b were evaluated for the hydroformylation of 1-octene.

Homobimetallic complexes of nickel, palladium and platinum, [(L2M)2(S2CNC4H8NCS2)]2+, are formed on reaction of the piperazine bis(dithiocarbamate) linker, KS2CNC4H8NCS2K, with [MCl2L2] (M=Ni, L2=dppe, dppf; M=Pd, L2=dppf; M=Pt, L=PEt3, PMePh2, PPh3, L2=dppf). [{Pd(C,N-C6H4CH2NMe2)}2(S2CNC4H8NCS2)] can be obtained in the same way. On reaction of [MCl2L2] (M=Pd, Pt) with the zwitterion S2CNC4H8NH2, a symmetrisation process occurs to yield a mixture of the complexes [M(S2CNC4H8NH2)L2]2+ and [(L2M)2(S2CNC4H8NCS2)]2+. However, the monometallic complexes [L2Ni(S2CNC4H8NH2)]2+ (L2=dppe, dppf) and [(L2Ni)2(S2CNC4H8NCS2)]2+ can be prepared without ready symmetrisation. Starting from the previously reported [(dppm)Ru(S2CNC4H8NH2)]2+, the heterotrimetallic products [(dppm)Ru(S2CNC4H8NCS2)M(dppf)]2+ (M=Pd, Pt) can be prepared without symmetrisation occurring. The crystal structures of five complexes are reported. The metalla-dithiocarbamate complexes [L2Ni(S2CNC4H8NCS2)] (L2=dppe, dppf) were used to functionalise the surface of gold nanoparticles by the displacement of a citrate shell to yield NiAu and FeNiAu materials.

A dithiocarbamate-based methodology is employed to prepare linked heteromultimetallic complexes and then further exploited in the surface functionalisation of gold nanoparticles.

The ligands, PhPNXMe (1), PhPNXPh (2), and PhPNSMe (3), (PhPNX = 2-Ph2P-C6H4CH[double bond, length as m-dash]NC6H4X-2; X = O, S) have been prepared. A range of new ruthenium complexes were synthesised using these and related ligands, namely: [{RuCl(PhPNO)}2Cl] (4), [Ru(PhPNO)2] (5), [RuCl(PhPNXR)(PPh3)]BPh4 [X = O, R = Me (6); X = O, R = Ph (7); X = S, R = Me (8)], [{RuCl(PhPNX'R)}2Cl]X [X' = O, R = Me, X = Cl(-) (9); X' = S, R = Me, X = BPh4(-) or PF6(-) (10)], and [RuCl(PhPNO-eta 6C6H5)]BPh4 (11). The catalytic activity of these complexes with respect to the hydrosilyation of acetophenone and the hydrogenation of styrene has been investigated, giving an insight into the requirements for an active complex in these reactions.

This paper reports the synthesis of bimetallic zinc thiosemicarbazone complexes with rigid aromatic linkers, using either 1,3- or 1,4- benzenediamines or 1,3- or 1,4- benzenedialdehydes as the basis of the linking groups. Non-rigid aliphatic diamines and dialdehydes were also used to link the zinc chelating units. Reaction of a bis(thiosemicarbazone) with a pendant NHNH(2) group with monoaldehydes or ketones gives a range of monomeric complexes with exocylic imine groups bearing a range of substituents. The zinc complexes can be quantitatively and rapidly transmetallated to the corresponding copper complexes and this route or direct reaction with the free ligand can be used to radiolabel the monomeric species with (64)Cu. In vivo and in vitro studies of one of the (64)Cu imine complexes shows substantial hypoxic selectivity and high tumour uptake in a murine model.

The structure of quinuclidine, HC(CH(2)CH(2))(3)N, has been re-investigated by quantum chemical calculations and by gas-phase electron diffraction (GED). The GED data, together with published rotational constants, have been analysed using the SARACEN method to determine the most reliable structure (r(h1)) for the gaseous molecule. The structures of two adducts of quinuclidine with group 13 trihydride molecules, MH(3) (M=B, Al), have also been determined by GED and quantum chemical calculations. The effect of the coordination of these hydrides to the quinuclidine nitrogen atom has been investigated, and the structural changes and energetics of adduct formation are discussed. We also present the crystal structure of quinuclidine borane.

Reaction of [ReOCl3(PPh3)(2)] with HCpz(3) (pz = pyrazole) in dichloromethane leads to the formation of a new Re(iv) complex [ReCl3(HCpz3)]X (X=Cl, [ReO4]) with loss of the rhenium-oxo group. We also report a convenient, high-yield synthetic route to complexes of the type [ReOXn(L)](3-n)+ (X=Cl, Br, n = 2, 3) by the reaction of bis(pyrazolylmethane) and bis(pyrazolylacetate) ligands with [ReOCl3(PPh3)2]. Dinuclear complexes containing the O=Re-O-Re=O group were also isolated and structurally characterised. We have also investigated the reactions of these ligands with diazenide precursors and isolated and characterised complexes of the type [ReClx(N2Ph) (L)(PPh3)] (x = 1,2). The potential applications of these complexes as radiopharmaeuticals is discussed.

The reactions of N,N-substituted thiosemicarbazides with copper salts have been investigated and either copper(II) thiosemicarbazide complexes, 1,3,4-thiadiazolium salts or 1,3,5-thiadiazoles are obtained depending on the Cu(II) salt and solvent used.

Zinc and copper bis(thiosemicarbazonato) complexes containing more than one metal centre have been prepared with a view to examining their application for molecular imaging. The zinc complexes are fluorescent with excitation and emission at relatively long wavelengths. The dinuclear copper complex undergoes two sequential, quasi-reversible reductions.

Two new bifunctional chelators that are derivatives of the bis(thiosemicarbazone) ATSMH(2) proligand have been prepared, one with two phenyl carboxylate substituents on the exocyclic nitrogens (L(1)H(2)) and one with a single phenyl carboxylate (L(2)H(2)). The new ligands have been characterised by NMR spectroscopy, mass spectrometry and in the case of L(1)H(2) by X-ray crystallography. The copper, nickel and zinc complexes of the new ligands have been synthesised and characterised. Electrochemical measurements show that the copper(II) complexes undergo a reversible reduction attributable to a Cu(II)/Cu(I) process. The new proligands have been tethered to the N-alpha-Boc-protected amino acids lysine and ornithine using solution and solid phase methods. The new amino acid conjugates form copper complexes and the complexes have been characterised by mass spectrometry and electronic spectroscopy. The bifunctional chelator L(2)H(2) has been conjugated to the tumour targeting peptide octreotide and the new ATSMH(2)-octreotide conjugate and its copper complex have been characterized by mass spectrometry. These new systems have the potential to be used for new targeted copper radiopharmaceuticals for imaging and therapy.

The reaction of the mono-diazenide core, [ReCl2(NNC6H(4)-4-OCH3)(NCCH3)(PPh3)2], with four equivalents of the sodium or potassium salts of dithiocarbamate (dtc) ligands gives neutral complexes of the formula [Re(NNC6H(4)-4-OCH3)(dtc)2(PPh3)]. It is possible to use a wide range of dithiocarbamate ligands (S2CNRR') with a variety of R groups (R=R'=methyl, phenyl or ethyl; R=methyl, R'=phenyl and R=R'=morpholino). Substitution reactions with dtc ligands on the mono-diazenide derived from 2-hydrazinopyridine, [ReCl2(NNC5H4N)(PPh3)2, give the analogous complexes, [Re(NNC6H5N)(dtc)2(PPh3)]. The new complexes have been characterised by a combination of NMR spectroscopy, mass spectrometry and X-ray crystallography. Cyclic voltammetry measurements in dimethyl formamide show that the rhenium diazenido-dtc complexes undergo a quasi-reversible oxidation tentatively assigned to a ReIII/ReIV oxidation. Since the parent complex, [ReCl2(NNC6H(4)-4-R)(NCCH3)(PPh3)2] can be prepared directly from perrhenate and readily derivatised with dtc ligands these complexes have potential relevance to the development of new therapeutic rhenium radiopharmaceuticals.

Imidazolium groups have been successfully incorporated into the structure of a "picket fence" porphyrin molecule to produce a novel tetra-imidazolium zinc metalloporphyrin anion receptor. UV/visible spectroscopic studies reveal that this receptor is selective for sulfate anions, capable of strongly complexing sulfate in competitive water-DMSO (5 : 95) solvent mixtures. Cyclic and square wave voltammetric studies demonstrate the receptor's ability to sense a variety of anions electrochemically.

The N-heterocyclic-carbene containing cobalt carbonyl compound [Co(IMes)(CO)3(Me)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), 1, has been synthesised by tertiary phosphine displacement from [Co(PPh3)(CO)3(Me)]. Subsequent carbonylation afforded the acyl derivative [Co(IMes)(CO)3(COMe)], 2. Similarly, the compound [Co(IMes)(CO)3(COEt)], 3, has been synthesised. The compounds 2 and 3 have been shown to react with dihydrogen to form the cobalt hydride compound [Co(IMes)(CO)3(H)], 4. The molecular structures of compounds 1 and 2 have been determined.

The compound [Fe(eta-C5H5)(CO)2(Me)] reacts thermally with N-heterocyclic carbenes (L) to give both alkyl, [Fe(eta-C5H5)(L)(CO)(Me)], and acyl, [Fe(eta-C5H5)(L)(CO)(COMe)], derivatives. The reaction temperature has been shown to affect the product distribution. The alkyl and acyl derivatives exist in an equilibrium that is more easily perturbed than in the tertiary phosphine analogues. DFT studies on the reactivity of [Fe(eta-C5H5)(CO)2(Me)] with PH3 and dihydroimidazole-2-ylidene (IH) have shown that CO exchange is energetically favoured for IH, and energetically disfavoured for PH3. The products of CO-induced migratory insertion, [Fe(eta-C5H5)(L)(CO)(COMe)], are more stable than the parent alkyl, [Fe(eta-C5H5)(L)(CO)(Me)], compounds. This stabilisation is larger when L = IH than when L = PH3. Stabilisation of the transition state by agostic interactions was seen in both instances, but this was significantly more pronounced for L = IH.

The transition metal acyl compounds [Co(L)(CO)3(COMe)] (L = PMe3, PPhMe2, P(4-Me-C6H4)3, PPh3 and P(4-F-C6H4)3), [Mn(CO)5(COMe)] and [Mo(PPh3)(eta(5)-C5H5)(CO)2(COMe)] react with B(C6F5)3 to form the adducts [Co(L)(CO)3(C{OB(C6F5)3}Me)] (L = PMe3, 1, PPhMe2, 2, P(4-Me-C6H4)3, 3, PPh3, 4, P(4-F-C6H4)3), 5, [Mn(CO)5(C{OB(C6F5)3}Me)] 6 and [Mo(eta(5)-C5H5)(PPh3)(CO)2(C{OB(C6F5)3}Me)], 7. Addition of B(C6F5)3 to a cooled solution of [Mo(eta(5)-C5H5)(CO)3(Me)], under an atmosphere of CO gave [Mo(eta(5)-C5H5)(CO)3(C{OB(C6F5)3}Me)] 8. In the presence of adventitious water, the compound [Co{HOB(C6F5)3}2{OP(4-F-C6H4)3}2] 9, was formed from [Co(P(4-F-C6H4)3)(CO)3(C{OB(C6F5)3}Me)]. The compounds 4 and 9 have been structurally characterised. The use of B(C6F5)3 as a catalyst for the CO-induced migratory-insertion reaction in the transition metal alkyl compounds [Co(PPh3)(CO)3(Me)], [Mn(CO)5(Me)], [Mo(eta(5)-C5H5)(CO)3(Me)] and [Fe(eta(5)-C5H5)(CO)2(Me)] has been investigated.

2,4,6-trialkylbenzenethiols react with [RuCl2(PPh3)3] to give Ru products with the alkyl substituents forming M-C sigma bonds, carbene, carbene with a S alpha-heteroatom, agostic hydrogen interaction or a simple tetrahedral Ru(II) species, depending on the substituent.

The novel adduct 1,1,3,3-tetramethylguanidine-gallane, (Me2N)2CN(H).GaH3, has been prepared by the reaction of [(Me2N)2CNH2]+Cl- with LiGaH4 in Et2O solution. Its spectroscopic properties indicate a monomeric species with an unusually strong coordinate link between the imido function and GaH3, an inference confirmed by the crystal structure at 150 K which also reveals significant secondary interactions through non-classical N-H...H-Ga bridges. Despite the intrinsic strength of the Ga-N bond, however, vaporisation at ca. 310 K occurs with partial dissociation, and decomposition via more than one pathway proceeds at temperatures >330-350 K to give a variety of products, including the free base, Me2NH, H2, and a novel gallium-nitrogen compound composed of a Ga4N4 cubane-like core bridged on three edges by -N{C(NMe2)2}GaH2- units.

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.

The synthesis of a series of dinuclear zinc(II) dithiocarbamate (dtc) macrocyclic receptors containing aryl spacer groups of different sizes is reported. As evidenced from 1H NMR titration investigations, these receptors have the ability to bind various neutral and anionic bidentate guests species, including 1,4-diazabicyclo[2.2.2]octane (DABCO), isonicotinate and terephthalate in a cooperative 1 : 1 intramolecular inclusion complex. Stability constant determinations reveal a correlation between the strength of complexation and complementary receptor cavity : guest molecule size. In particular, the X-ray structure of a 1 : 1 host-guest complex between a dinuclear zinc(II) dtc receptor and DABCO illustrates the cooperative nature in which the dinuclear receptor associates with the bidentate guest.

Reaction of [ReBr3(CO)3]2- with aryldiazonium salts gives the Re(iii) diazenide complexes [ReBr2(NNC6H4R-4)(CO)2]-. The attachment of a PhNHCS tethering group to pyridyl hydrazine generates a HYNIC related proligand which gives a stable chelated pyridyliumthiocarbazide(2-) derivative of the [Re(I)(CO)3]+ core.

Attachment of a thioamide tethering group provides a modification of the well-known pyridylhydrazine based route to radiolabelling of biomolecules (the HYNIC system) and gives a proligand which gives stable, well-defined chelated derivatives with both Re(v) oxo and Re(III) diazenide cores. Both display previously unknown bonding modes for the pyridylthiocarbazide ligands.

A series of copper(II) and nickel(II) 1,3-bis(thiosemicarbazonato) complexes have been synthesised by the reaction of the metal acetates with pyrazoline proligands. In each case the complexes have an overall neutral charge with a dianionic ligand. The copper 1,3-bis(4-methyl-3-thiosemicarbazonato complex has been characterised by X-ray crystallography, which shows the copper is in an essentially square-planar symmetric N(2)S(2) environment. The nickel 1,3-bis(4-methyl-3-thiosemicarbazonato) and nickel 1,3-bis(4-phenyl-3-thiosemicarbazonato) complexes have been characterised by X-ray crystallography and show that in these cases the nickel is in a distorted square-planar environment, but the bonding mode of the ligands is unusual; the nickel binds to one of the aza-methinic nitrogen atoms and one hydrazinic nitrogen, creating one five-membered N-N-C-S-Ni chelate ring and one four-membered N-C-S-Ni chelate ring. Interestingly, the X-ray structure of the ethyl analogue [1,3-bis(4-ethyl-3-thiosemicarbazonato)nickel(II)] shows that in this case the nickel is symmetrically coordinated in the usual manner. The nickel complexes are diamagnetic and the different coordination modes are confirmed in solution by NMR spectroscopy. The complexes are susceptible to oxidation in air and a nickel complex, in which the central methylene carbon has been oxidised, has been characterised by X-ray crystallography and NMR spectroscopy. Electrochemical measurements show that the copper complexes undergo a reversible one-electron reduction at biologically accessible potentials.