Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study's results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

Recently, as the use of wearable devices and the demand for eco-friendly energy have increased, many studies have been conducted on triboelectric nanogenerators (TENGs), which can economically harvest energy. Paper is considered a promising substrate and frame material that can be used to manufacture self-powered TENGs, owing to its flexibility, low cost, and accessibility. Herein, we present a sandwich-structured foldable paper-based TENG (FP-TENG) that comprises flexible materials and uses paper as a substrate. The FP-TENG can generate up to 572 mW/m2 of power via contact–separation of the triboelectric electrified body at the top and bottom. With more folds of the FP-TENG, the triboelectric cross-sectional area increases, and, thus, the electrical output increases. In addition, the proposed TENG exhibits excellent durability without signal degradation under 5000 cycles of repeated pushing motions. To demonstrate its practicality, the FP-TENG was manufactured in the form of a wristwatch Velcro and connected to an electronic watch panel to supply power. Various deformations are possible with origami, and they can drive wristwatches through external forces. Therefore, the FP-TENG is expected to be utilized as a sustainable and promising eco-friendly energy source for small electronic devices. [ABSTRACT FROM AUTHOR]

The European Union, in pursuit of the goal of reducing emissions by at least 55% by 2030 and achieving climate neutrality by 2050, is deploying different actions, with industry decarbonization as a key strategy. However, increasing electricity demand requires an intensification of energy generation from clean technologies, and the energy system's expansion is hindered by renewable generation's climatic dependencies and the imperative for substantial electrical infrastructure investments. Although the transmission grid is expected to grow, flexibility mechanisms and innovative technologies need to be applied to avoid an overwhelming growth. In this context, this paper presents a thorough assessment, conducted within the FLEXINDUSTRIES project, of the flexibility potential across seven energy-intensive industries (automotive industry, biofuel production, polymer manufacturing, steel manufacturing, paper mills, pharmaceutical industry, and cement production). The methodology followed during the analysis entails reviewing the state-of-the-art existing flexibility mechanisms, industries' energy markets engagement, and technical/operational readiness. The results highlight the feasibility of the proposed actions for enabling energy market flexibility through demand-response programs, quantifying energy opportunities, and pinpointing regulatory and technical barriers. [ABSTRACT FROM AUTHOR]

The three-dimensional (3D) path planning problem of an Unmanned Aerial Vehicle (UAV) considering the effect of environmental wind in a dense city is investigated in this paper. The mission of the UAV is to fly from its initial position to its destination while ensuring safe flight. The dense obstacle avoidance and the energy consumption in 3D space need to be considered during the mission, which are often ignored in common studies. To solve these problems, an improved Deep Reinforcement Learning (DRL) path planning algorithm based on Double Deep Q-Network (DDQN) is proposed in this paper. Among the algorithms, the random obstacle training method is first proposed to make the algorithm consider various flight scenarios more globally and comprehensively and improve the algorithm's robustness and adaptability. Then, the linear soft update strategy is employed to realize the smooth neural network parameter update, which enhances the stability and convergence of the training. In addition, the wind disturbances are integrated into the energy consumption model and reward function, which can effectively describe the wind disturbances during the UAV mission to achieve the minimum drag flight. To prevent the neural network from interfering with training failures, the meritocracy mechanism is proposed to enhance the algorithm's stability. The effectiveness and applicability of the proposed method are verified through simulation analysis and comparative studies. The UAV based on this algorithm has good autonomy and adaptability, which provides a new way to solve the UAV path planning problem in dense urban scenes. [ABSTRACT FROM AUTHOR]

With the rapid development of renewable energy and the increasing maturity of energy storage technology, microgrids are quickly becoming popular worldwide. The stochastic scheduling problem of microgrids can increase operational costs and resource wastage. In order to reduce operational costs and optimize resource utilization efficiency, the real-time scheduling of microgrids becomes particularly important. After collecting extensive data, reinforcement learning (RL) can provide good strategies. However, it cannot make quick and rational decisions in different environments. As a method with generalization ability, meta-learning can compensate for this deficiency. Therefore, this paper introduces a microgrid scheduling strategy based on RL and meta-learning. This method can quickly adapt to different environments with a small amount of training data, enabling rapid energy scheduling policy generation in the early stages of microgrid operation. This paper first establishes a microgrid model, including components such as energy storage, load, and distributed generation (DG). Then, we use a meta-reinforcement learning framework to train the initial scheduling strategy, considering the various operational constraints of the microgrid. The experimental results show that the MAML-based RL strategy has advantages in improving energy utilization and reducing operational costs in the early stages of microgrid operation. This research provides a new intelligent solution for microgrids' efficient, stable, and economical operation in their initial stages. [ABSTRACT FROM AUTHOR]

Low carbon operation of power systems is a key way to achieve the goal of energy power carbon peaking and carbon neutrality. In order to promote the low carbon transition of energy and power and the coordinated and optimized operation of distributed energy sources in virtual power plants (VPP), this paper proposes a framework for collaborative utilization of pumped storage–carbon capture–power-to-gas (P2G) technologies. It also constructs a multi-time scale low carbon economic dispatch model for VPP to minimize the internal resource operation cost of VPP in each time period. During the intraday scheduling stage, the day-ahead scheduling results as the planned output and the energy flow is then dynamically corrected at a short-term resolution in the framework. This allows for the exploration of the low-carbon potential of each aggregation unit within the virtual power plant. The results of the simulation indicate that the strategy and model proposed in this paper can effectively encourage the consumption of renewable energy sources, promote the low-carbon operation of power system power, and serve as a valuable reference for the low-carbon economic operation of the power system. [ABSTRACT FROM AUTHOR]

Energy demand is rising over time in both developing and developed countries. Therefore, finding new sources of energy is a prime concern now. For this effort, this paper presents the pyrolysis of onion (Allium cepa) shells in a reactor with a fixed bed for generating alternative liquid fuel. This paper also compares alternative fuel characteristics, including higher heating value, viscosity, density, pour point, and flash point, with conventional petroleum fuels at optimal process conditions. The work adopted pyrolysis to produce liquid fuel at a temperature range of 400–550 °C and utilized LPG to provide a heat source. The liquid product (fuel oil) was collected, and non-condensable gas was flared. The liquid product was tested for various properties, and the results of the analyses show that alternative fuel has a higher heating value of 12.227 MJ/kg, density of 800 kg/m3, viscosity of 4.3 cP at 30 °C, pour point below −6.2 °C, and flash point around 137 °C, with a variation due to the volatile matters. To obtain favorable conditions for pyrolysis, some parameters, including bed temperature, sample quantity, average particle size, and operating time, were varied and analyzed. The physio-chemical properties made the alternative fuels isolated from conventional petroleum fuels due to the variation in distillation temperature. This work shows that the fuel oil generated from the pyrolysis of onion shells could be considered an alternative source of fuel. [ABSTRACT FROM AUTHOR]

Human activities overwhelm our environment with CO2 and other global warming issues. The current electricity landscape necessitates a superior, continuous power supply and addressing such environmental concerns. These issues can be resolved by incorporating renewable energy sources (RESs) into the utility grid. Thus, this paper presents an optimized hybrid fuzzy logic self-tuning PID controller to control the automatic generation control (AGC) of various renewable sources. This controller regulates the frequency deviations of the power system and governs the change in the tie-line load of a multi-area hybrid energy system composed of wind, biomass, and photovoltaic energy sources. MATLAB Simulink software was applied to design and test the system. The PID controller has been tuned using four algorithms, namely, genetic algorithm (GA), pattern search (PS), simulated annealing (SA), and particle swarm optimization (PSO), and we compared the results with the proposed novel optimized PID controller (GA-fuzzy logic self-tuning technique) to validate it. The results show the superiority of the proposed hybrid GA-fuzzy logic self-tuning algorithm over the other algorithms in bringing the power system back to its regular operation. The paper also proposes an operation strategy to lower the utilization of biomass energy in the presence of other renewable energy sources. [ABSTRACT FROM AUTHOR]

This study explored the association between renewable energy uptake and digitalization in the sector by reviewing relevant literature (published 2010–2022), with the aim of identifying the existing utilization of digital technologies within the sector, challenges to adoption, and future prospects. Different search engines (SCOPUS, Web of Science, and Google Scholar) were used to locate relevant papers and documents. The results revealed the high significance of digital technologies in supporting the renewable energy sector, with high costs and security risks representing the key challenges. Most papers reviewed had a positive outlook, but recommended further research and development for effective energy transition and resilient infrastructure. The current drivers of the integration of digital technologies to support the diffusion of renewable energy sources appear to extend beyond energy demand and involve many aspects of sustainability and sustainable development. Compared with previous reviews, this work has unique scope and novelty since it considers the bigger picture of the coupling between digitalization and the renewable energy sector, with a greater focus on critical areas in these two interconnected bodies that need to be addressed. The relatively small sample of relevant papers (69 from 836 hits) located in the literature review confirms the need for more research covering the subject in greater depth. [ABSTRACT FROM AUTHOR]

It is now well-established that moisture in the oil paper insulation used in power and instrument transformers significantly reduces the transformers' lifetimes, and can eventually lead to premature failure. This moisture should, therefore, always be removed, not only during production but also after repairs. At the final stage of manufacturing, the drying process should be carried out to remove water and air vacuoles contained in the cellulose-based paper before impregnation. Successful drying helps increase the residual life of transformers, because the presence of moisture and air vacuoles accelerates the aging/degradation process of the oil paper insulation. Proper estimation of residual moisture before impregnation and the determination of the time required for drying play key roles in the time-consuming process of drying. In this paper, the disadvantages of inadequate drying are addressed, followed by a mathematical approach to model the paper drying process. A mathematical model describing the kinetics of drying according to temperature, initial moisture, paper weight, final moisture, and extraction rate is proposed. This model also estimated the amount of moisture removed at the end of the drying process. [ABSTRACT FROM AUTHOR]

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Grid-connected photovoltaic (PV) power systems are one of the most promising technologies to address growing energy demand and ecological challenges. This paper proposes smart switching to mitigate inrush currents during the connection of single-phase transformers used in PV systems. An effective inrush current mitigation contributes to the reliability of PV systems. The inrush current severity is influenced by the pseudorandom residual flux at the transformer core and the energization point-on-wave. The most common approach to avoid inrush currents is controlled connection, which requires prior knowledge of the residual flux. However, the residual flux can differ in each case, and its measurement or estimation can be impractical. The proposed smart switching is based on a comprehensive analysis of the residual flux and the de-energization trajectories, and only requires two pieces of data (ϕRM and ϕ0, flux values of the static and dynamic loops when the respective currents are null), calculated from two simple no-load tests. It has a clear advantage over common approaches: no need to estimate or measure the residual flux before each connection, avoiding the need for expensive equipment or complex setups. Smart switching can be easily implemented in practical settings, as it considers different circuit breakers with distinctive aperture features, making it cost-effective for PV systems. [ABSTRACT FROM AUTHOR]

The pulp and paper (P&P) sector is a dynamic manufacturing industry and plays an essential role in the Austrian economy. However, the sector, which consumes about 20 TWh of final energy, is responsible for 7% of Austria's industrial CO2 emissions. This study, intending to assess the potential for improving energy efficiency and reducing emissions in the Austrian context in the P&P sector, uses a bottom-up approach model. The model is applied to analyze the energy consumption (heat and electricity) and CO2 emissions in the main processes, related to the P&P production from virgin or recycled fibers. Afterward, technological options to reduce energy consumption and fossil CO2 emissions for P&P production are investigated, and various low-carbon technologies are applied to the model. For each of the selected technologies, the potential of emission reduction and energy savings up to 2050 is estimated. Finally, a series of low-carbon technology-based scenarios are developed and evaluated. These scenarios' content is based on the improvement potential associated with the various processes of different paper grades. The results reveal that the investigated technologies applied in the production process (chemical pulping and paper drying) have a minor impact on CO2 emission reduction (maximum 10% due to applying an impulse dryer). In contrast, steam supply electrification, by replacing fossil fuel boilers with direct heat supply (such as commercial electric boilers or heat pumps), enables reducing emissions by up to 75%. This means that the goal of 100% CO2 emission reduction by 2050 cannot be reached with one method alone. Consequently, a combination of technologies, particularly with the electrification of the steam supply, along with the use of carbon-free electricity generated by renewable energy, appears to be essential. [ABSTRACT FROM AUTHOR]

Energy-intensive enterprises lack a scientific and effective energy efficiency assessment framework and methodology. This lack leads to an inaccurate understanding of energy usage and its benefits. As a result, there is energy wastage and loss. This wastage and loss negatively affect product costs. They also present a challenge to effective energy management. To address these issues, this paper introduces a novel, comprehensive energy efficiency evaluation system. This system integrates both qualitative and quantitative measures. It proposes an evaluation model based on the Particle Swarm Optimization (PSO) combined with the Analytic Hierarchy Process (AHP) and Fuzzy Comprehensive Evaluation (FCE), wherein PSO is employed to optimize the weights determined by AHP, ensuring that the significance attributed to various indicators is scientific, objective, and rational. The FCE method is utilized to convert diverse factors affecting corporate energy efficiency, across different types and scales, into standardized 0–1 values, enabling a comparative analysis of the impact of each process and indicator on energy efficiency. Furthermore, the paper introduces an energy efficiency prediction model employing a multivariate linear regression algorithm, which demonstrates a good fit, facilitating the transition from retrospective energy efficiency evaluation to proactive improvements. Utilizing data on actual consumption of water, electricity, and steam from an enterprise, along with expert assessments on the implementation levels of new processes, technologies, equipment, personnel scheduling proficiency, steam recovery rates, and adherence to policies and assessments, a simulation experiment of the proposed model was conducted using Python. The evaluation yielded an energy efficiency score of 0.68; this is consistent with the real-world scenario of the studied enterprise. The predicted mean square error of 9.035416039503998 ×   10 − 9 indicates a high model accuracy, validating the practical applicability and effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

The research problem of this paper is related to numerous open questions in the field of energy, its understanding, its use, and the challenges of the energy future. After the introductory part, in which a brief historical overview of energy literacy is provided, the paper focuses on energy literacy, its emergence, and the different approaches to its definition and measurement. The paper analyzes the energy literacy of students at the Faculty of Economics in Rijeka based on their cognitive, affective, and behavioral skills. Their knowledge about energy, energy processes, and the energy efficiency of the objects they encounter on a daily basis is examined. Their personal attitudes and values are examined through various forms of personal initiatives and active participation in energy sustainability projects. Finally, the habits and behavioral patterns that the respondents have in their daily lives and their tendencies to save energy resources and find energy-efficient solutions are examined. Despite some positive findings, the current results are not satisfactory and point to the creation of adequate public policies with a particular focus on education and the role of the corrective mechanisms of the state, but also the need for joint negotiations between policy makers, regulators, scientists, representatives of civil society, and the business community. The particular contribution of this work is reflected in being the first research of its kind conducted among Croatian economics students, as well as among Croatian students in general; in the creation of a research instrument that is conceptually consistent with the findings from the existing literature, but with an original set of questions within each energy literacy skill adapted to the cultural and sociological background of the respondents; and in a kind of progress from previous research by taking into account the quantitative aspect (in addition to the qualitative) assessment of the respondents' energy literacy. [ABSTRACT FROM AUTHOR]

Electricity consumption in buildings is one of the major causes of energy usage and knowledge of this can help building owners and users increase energy efficiency and conservation efforts. For Pacific Island countries, building electricity demand data is not readily accessible or available for constructing models to predict electricity demand. This paper starts to fill this gap by studying the case of schools in Fiji. The aim of the paper is to assess the factors affecting electricity demand for grid-connected Fijian schools and use this assessment to build mathematical models (multiple linear regression (MLR) and artificial neural network (ANN)) to predict electricity consumption. The average grid-connected electricity demand in kWh/year was 1411 for early childhood education schools, 5403 for primary schools, and 23,895 for secondary schools. For predicting electricity demand (ED) for all grid-connected schools, the stepwise MLR model shows that taking logarithm transformations on both the dependent variable and independent variables (number of students, lights, and air conditioning systems) yields statistically significant independent variables with an R2 value of 73.3% and RMSE of 0.2248. To improve the predicting performance, ANN models were constructed on both the natural form of variables and transformed variables. The optimum ANN model had an R2 value of 95.3% and an RMSE of 59.4 kWh/year. The findings of this study can assist schools in putting measures in place to reduce their electricity demand, associated costs, and carbon footprint, as well as help government ministries make better-informed policies. [ABSTRACT FROM AUTHOR]

Global warming, pollution, and increasing energy demand have compelled electrification of the transport sector. Electric vehicles are not only an attractive and cleaner mode of transport, but they also possess the capacity to offer flexible storage alternative based on bidirectional vehicle-to-grid schemes. Vehicle-to-grid or V2G technology permits electric vehicles' batteries to store energy and discharge it back to the power grid during peak-load periods. However, the feasibility and economic viability of V2G is still a matter of concern and needs investigation. In this paper, the authors delved into the feasibility of V2G technology by analysing the real time-charging data of a V2G demonstration project named EV-elocity, located at the University of Nottingham campus in the UK. The authors analysed the charging data and trip-status data of two charging sites and put forward some insights regarding the feasibility of V2G and the behavioural traits of the vehicles. This paper will enlighten the research community regarding the feasibility and benefits of V2G in a real-world environment by analysing the charging/discharging and vehicle behaviour and reporting the opportunities and benefits of vehicle-to-grid technology. [ABSTRACT FROM AUTHOR]

Mining production, being one of the most energy-intensive industries globally, consumes substantial amounts of fossil fuels and contributes to extensive carbon emissions worldwide. The trend toward electrification and advanced developments in battery technology have shifted attention from diesel power to battery alternatives. These alternatives are appealing, as they contribute to decarbonisation efforts when compared to conventional diesel trucks. This paper presents a comprehensive review of recent technological advancements in powertrains for Mining Haulage Truck (MHT). It also compares these configurations based on mining system-level considerations to assess their future potential. The evaluated configurations include Diesel-Electric Truck (DET), Trolley Assist Truck (TAT), Battery-only Truck (BOT), Battery Trolley with Dynamic charging truck (BT-D), and Battery Trolley with Stationary charging truck (BT-S). According to the analysis, the energy demand for on-board diesel or battery power (excluding trolley power) in these alternative options is as follows: DET—681 kWh, BOT—645 kWh, TAT—511 kWh, BT-S—471 kWh, and BT-D—466 kWh. The paper also illustrates the theory of battery size design based on the current battery technology, battery material selection, battery package design, and battery size selection methods. In the case of tailored battery size selection, BOT, BT-D, and BT-S configurations require LiFePO4 (LFP) battery masses of 25 tonnes, 18 tonnes, and 18 tonnes, respectively. Based on a techno-economic assessment of battery MHT alternatives with a future perspective, it has been determined that BT-D requires the lowest amount of on-board battery energy. Furthermore, over a span of 20 years, BT-S has demonstrated the lowest on-board battery cost. [ABSTRACT FROM AUTHOR]

This paper introduces a groundbreaking approach to demand response management, aiming to empower consumers through innovative strategies. The key contribution is the concept of "acquiring flexibility rights", wherein consumers engage with power aggregators to curtail energy usage during peak-load periods, receiving incentives in return. A flexibility right coefficient is introduced, allowing consumers to tailor their participation in demand response programs, ensuring their well-being. Additionally, a lighting intensity control system is developed to enhance residential lighting network efficiency. The study demonstrates that high-energy consumers, adopting a satisfaction factor of 10, can achieve over 61% in electricity cost savings by combining the lighting control system and active participation in demand response programs. This not only reduces expenses but also generates income through the sale of flexibility rights. Conversely, low-energy consumers can fully offset their expenses and accumulate over USD 33 in earnings through the installation of solar panels. This paper formulates an optimization problem considering flexibility rights, lighting control, and time-of-use tariff rates. An algorithm is proposed for a distributed solution, and a sensitivity analysis is conducted for evaluation. The proposed method showcases significant benefits, including cost savings and income generation for consumers, while contributing to grid stability and reduced blackout occurrences. Real data from a residential district in Tehran validates the method's effectiveness. This study concludes that this approach holds promise for demand response management in smart grids, emphasizing the importance of consumer empowerment and sustainable energy practices. [ABSTRACT FROM AUTHOR]

In the European Union, increasing attention is already being paid not only to the development of renewable energy sources, but also to the establishment of solutions to achieve local energy self-sufficiency while increasing the role of citizens in managing the energy they generate. This approach is expected both to have a positive impact on the environment and the reduction of greenhouse gas emissions, and to enhance energy security—both in economic and civic terms by, i.a., combating energy poverty. The development of local energy communities promoted in the EU is supported i.a. by energy cooperatives. These contribute to the efficient harnessing of renewable energy potential in rural and urban-rural areas, and have been developing in Poland for several years now. In their previous studies, the authors of this research paper attempted to verify the generation (number, type and capacity of installed sources) and consumption (energy demand) configurations in which an energy cooperative would be a viable solution for prosumers who might establish it. However, over the past few years, the conditions for prosumers and the method of their accounting with the electricity seller have changed radically in Poland (shift from net metering to net billing). This situation has opened up space for further research and encouraged the authors to revisit the problem of analyzing the viability of establishing energy cooperatives in relation to the rules of operation of individual prosumers. This research was carried out for three scenarios, and the horizon of the analyses conducted and described extends to 2045. The comparative analysis included energy consumers without their own generation sources, prosumers with a photovoltaic generation installation covered by the net billing model, as well as a scenario involving prosumers' cooperation within an energy cooperative, which by law is settled in the net metering model. Conclusions from the research and simulations made it possible to confirm the claim that, despite changes in the rules of prosumer billing, developing energy independence in the energy community formula results in a significant reduction in the cost of purchasing electricity (even several times lower purchase costs in the timeframe analyzed) and can lead to a reduction in the payback time of investments in generation sources even by a factor of two. The results presented in this research paper open up space for further research. The outcomes allow us to assume that energy cooperatives—in the organizational and institutional model in Poland—are a good tool for reducing the phenomenon of energy poverty on a local scale. [ABSTRACT FROM AUTHOR]

Cities play a pivotal role in achieving worldwide carbon neutrality due to their significant contribution to global energy consumption and carbon emissions. Therefore, planning effective strategies and guiding evidence-based policymaking at the city scale becomes even more crucial. Composite indices serve as a valuable tool for monitoring urban energy transition trends. This paper aims to present a novel approach, robust and flexible even under conditions of data scarcity, for tracking the energy transition trend of a city by means of a composite index (UETI). The Turin case study is introduced to test the applicability of the proposed approach. Additionally, to demonstrate the robustness of the composite index framework, the paper includes the findings of correlation and sensitivity analyses. This study reveals a significant improvement in Turin's environmental and energy domains, while the socio-economic domain shows more modest improvement. Furthermore, the study highlights the need to address the shortage of urban data to enhance the accuracy and reliability of metric-based frameworks and to extend the assessment to a larger sample of cities. [ABSTRACT FROM AUTHOR]

The paper offers innovative cooking utensil designs for remote, isolated, and even peri-urban communities at a low price, with high reliability and simple construction. It can alleviate energy poverty and improve food security. This utensil uses only local solar energy directly and allows comfortable indoor cooking. This paper provides the design principles of a solar cooker/frying pan or generic heater, based on a PV panel or a plurality of them, which are directly connected to a plurality of Positive Thermal Coefficient (PTC) resistors to match the power. PTCs are nowadays produced in massive quantities and are widely available at low cost. The proposed device does not require an electronic controller or a battery for its operation. The aim is for family use, although the design can be easily scaled to a larger size or power, maintaining its simplicity. Electric heating inside or attached to the cooking pot, plus the temperature self-limiting effect of PTCs, allows for thermally insulating the cooking pot from its outside using ordinary materials. Insulation enhances energy efficiency during cooking and keeps cooked food warm for a long time. Clean development would receive a significant impulse with its application. A simple mathematical model describes its functioning and states guidelines for adequate design. Its results indicate a successful proof of concept and high efficiency both for water and oil as representatives of cooking. [ABSTRACT FROM AUTHOR]

This paper presents the process of creating a model for electric vehicle (EV) energy consumption, enabling the rapid generation of results and the creation of energy maps. The most robust validation indicators were exhibited by an artificial intelligence method, specifically neural networks. Within this framework, two predictive models for EV energy consumption were developed for winter and summer conditions, based on actual driving cycles. These models hold particular significance for microscale road analyses. The resultant model, for test data in summer conditions, demonstrates validation indicators of an R2 of 86% and an MSE of 1.4, while, for winter conditions, its values are 89% and 2.8, respectively, confirming its high precision. The paper also presents exemplary applications of the developed models, utilizing both real and simulated microscale data. The results obtained and the presented methodology can be especially advantageous for decision makers in the management of city roads and infrastructure planners, aiding both cognitive understanding and the better planning of charging infrastructure networks. [ABSTRACT FROM AUTHOR]

The primary contributors to elevated line losses in low-voltage distribution networks are three-phase load imbalances and variations in load peak–valley differentials. The conventional manual phase sequence adjustment fails to capitalize on the temporal characteristics of the load, and the proliferation of smart homes has opened up new scheduling possibilities for managing the load. Consequently, this paper introduces a loss-reduction method for low-voltage distribution networks that leverages load-timing characteristics and adjustment capabilities. This method combines dynamic and static methods to reduce energy consumption from different time scales. To commence, this paper introduced a hierarchical fuzzy C-means algorithm (H-FCM), taking into account the distance and similarity of load curves. Subsequently, a phase sequence adjustment method, grounded in load-timing characteristics, was developed. The typical user load curve, derived from the classification of user loads, serves as the foundation for constructing a long-term commutation model, therefore mitigating the impact of load fluctuations on artificial commutation. Following this, this paper addressed the interruptible and transferable characteristics of various smart homes. This paper proposed a multi-objective transferable load (TL) optimal timing task adjustment model and a peak-shaving control strategy specifically designed for maximum sustainable power reduction of temperature-controlled loads (TCL). These strategies aim to achieve real-time load adjustment, correct static commutation errors, and reduce peak-to-valley differences. Finally, a simulation verification model was established in MATLAB (R2022a). The results show that the proposed method mainly solves the problems of three-phase imbalance and large load peak–valley difference in low-voltage distribution networks and reduces the line loss of low-voltage distribution networks through manual commutation and load adjustment. [ABSTRACT FROM AUTHOR]

In this paper, a user thermal comfort criterion based on predicted mean vote (PMV) values is introduced to realize the optimal operation of an improved energy hub (IEH) while considering thermal inertia and user thermal behavior. A three-layer optimization model based on user thermal comfort is constructed which fully considers user thermal comfort demand, IEH operating costs, and energy network constraints. Moreover, since IEH optimization considering user thermal comfort is a multi-objective bilevel optimization (MNBO) problem, this paper proposes an improved multilayer nested quantum genetic algorithm (IMNQGA) to solve it. Finally, the effectiveness of the proposed optimization model and algorithm is verified through the analysis of the four modes. The examples show that the proposed optimal control method can reduce the system's operating costs and improve energy efficiency while satisfying user thermal comfort demand. [ABSTRACT FROM AUTHOR]

The global energy crisis, which began in 2021 due to the extraordinary economic recovery after the pandemic and intensified after Russia's invasion of Ukraine in February 2022, has changed the conditions of energy management, paying more attention to energy efficiency. Natural gas prices have reached record levels and, consequently, so have electricity prices in some markets. Oil prices have reached their highest level since 2008. Higher energy prices have contributed to sharply increased inflation. Households are again becoming interested in buying coal as a source of heat. High energy and gas prices have pushed many families into poverty and forced some factories to cut production or even close. They have also slowed economic growth to the point where some countries are heading for a serious recession. Paradoxically, the negative effects of the energy crisis may accelerate the introduction of cleaner, sustainable, renewable energy such as wind and solar energy. The energy crisis is comparable to the oil crisis of the 1970s, when it contributed to significant advances in energy efficiency. The current crisis has highlighted the importance of investments in renewable energy resources and initiated the process of integrating regional markets, developing energy efficiency and promoting renewable energies. The aim of this article is to comprehensively explore the complex relationship between energy awareness, consumption patterns, and energy efficiency, with a focus on both individual consumers and industries, during the global energy crisis. This paper is based on a literature review, overarching policy documents, energy reports, and other secondary documents. The primary research method was the systematic literature review method, based on which the impact of the global energy crisis on energy efficiency was evaluated. This study emphasizes the diverse influences on energy awareness, ranging from economic factors to consumer preferences and environmental consciousness. The findings of the paper underscore the significant responsibility of industries in contributing to energy-saving efforts and the active role of consumers in the energy market. The responsibility of industries in contributing to energy efficiency is highlighted, with a call for a comprehensive approach that integrates energy-saving criteria into product development and corporate social responsibility. [ABSTRACT FROM AUTHOR]

Before the COVID-19 pandemic, ventilation in buildings was not always given its due importance. The World Health Organization has highlighted the important role of air exchange with the outdoors in improving the air quality in buildings; buildings should, therefore, be equipped with mechanical ventilation or adequate air conditioning systems. This paper aims to investigate different retrofit solutions for air conditioning, evaluating them in terms of energy consumption and cost and the impact of increased outdoor air exchange rates on countering the propagation of COVID-19; the latter is the main novelty of the paper. As a case study, we take an existing office building located in Central Italy that was previously not equipped with a mechanical ventilation system (a system with primary air was introduced during the study). The energy analysis was conducted using dynamic simulation software after validation through energy bills; energy and economic analyses were conducted considering different external-air exchange rates. An optimal number of outdoor air changes was found to mitigate the risk of COVID-19 infection, a finding in line with the international literature. The increase in air changes with outdoor air leads to a rise in energy consumption and costs. These values were evaluated for different air conditioning systems and operational schedules. These drawbacks can be made less significant by combining interventions in the system with energy-efficiency measures applied to the building envelope. [ABSTRACT FROM AUTHOR]

Since the power generation structures and load characteristics in each province in China are quite different, the distribution of peak regulating resources and demands are extremely imbalance. Restricted by a low power marketization degree, peak regulating resource shortages, and transmission channel blocks, the efficient utilization of new energy is facing greater pressures. In order to improve the mutual aid in regional power grids and to obtain more precise simulation results, this paper proposes a two-layer optimization dispatching model, considering the mutual aid of peak regulation resources between each province. It determines the optimal startup mode and the units' power output in each province and obtains the power output arrangements for all the units and the technical and economic indicators. The model and the solution method are original and innovative. And it effectively solved the unequal distribution problem between the peak regulating demands and resources of each provincial power grid. Finally, taking an actual regional power grid in China as an example, the simulation results show that the proposed model can significantly improve the utilization rate of new energy, which verifies the effectiveness and feasibility of the proposed model and methods presented in this paper. [ABSTRACT FROM AUTHOR]

Improving energy efficiency is an effective way to address the issues of economic development, energy saving and emissions reduction. For any important industries it is therefore necessary to measure energy efficiency and set a practical target for it. In this paper, we use CCR, SBM and energy intensity to measure the energy efficiency of the paper industries of 22 EU countries. Results indicate that the SBM and CCR efficiency value is more meaningful for policy makers than that of energy intensity, as measurement results of energy intensity deviate from reality and economic efficiency. The CCR and SBM have roughly the same fluctuation trends and the average SBM energy efficiency value is 0.71, always 10 percent lower than CCR model, as it takes simultaneous account of both the optimal input-output and has more discriminatory power in efficiency measurement. Furthermore, EU policy makers could improve energy efficiency by raising energy prices. As for the 2030 EU target of energy saving and emission reduction, the EU should pay more attention to five major paper producers: Finland, Sweden, Germany, the United Kingdom and Italy. [ABSTRACT FROM AUTHOR]

With a shift in the automotive industry's focus towards sustainability and energy efficiency, optimizing vehicle handling dynamics has been put on a secondary level. Moreover, there is a growing trend towards comfort-oriented design, conversely to the vehicle-handling one. Nevertheless, recent advancements such as the integration of multiple independently controlled electric motors on a vehicle is enabling torque vectoring, which offers a promising opportunity for reconciling these conflicting objectives. This paper proposes a novel approach for jointly improving vehicle handling and energy efficiency performance. Indeed, through advanced simulation techniques, the effects of various suspension configurations are explored to strike a balance between cornering performance and energy consumption. Then, a torque vectoring controller is designed in combination with a meticulous tuning of the suspension setup. This innovative approach of considering the active control design together with the suspensions' setup allows to obtain superior performances. Indeed, the desired vehicle cornering capabilities can be achieved while also guaranteeing a significantly more efficient vehicle in straight-line running, which covers most of the usual road driving time. [ABSTRACT FROM AUTHOR]

In advanced manufacturing, optimizing mixed-model synchronous assembly lines (MMALs) is crucial for enhancing productivity and adhering to sustainability principles, particularly in terms of energy consumption and energy-efficient sequencing. This paper introduces a novel approach by categorizing sequence-dependent setup times into bipartite categories: workpiece-independent and workpiece-dependent. This strategic division streamlines assembly processes, reduces idle times, and decreases energy consumption through more efficient machine usage. A new mathematical model is proposed to minimize the intervals at which workpieces are launched on an MMAL, aiming to reduce operational downtime that typically leads to excessive energy use. Given the Non-deterministic Polynomial-time hard (NP-hard) nature of this problem, a genetic algorithm (GA) is developed to efficiently find solutions, with performance compared against the traditional branch and bound technique (B&B). This method enhances the responsiveness of MMALs to variable production demands and contributes to energy conservation by optimizing the sequence of operations to align with energy-saving objectives. Computational experiments conducted on small and large-sized problems demonstrate that the proposed GA outperforms the conventional B&B method regarding solution quality, diversity level, and computational time, leading to energy reductions and enhanced cost-effectiveness in manufacturing settings. [ABSTRACT FROM AUTHOR]

The main objective of the research presented in the following work was the adaptation of reflection-radar technology in a detection and navigation system using radio-tomographic imaging techniques. As key aspects of this work, the energy optimization of high-frequency transmitters can be considered for use inside buildings while maintaining user safety. The resulting building monitoring and control system using a network of intelligent sensors supported by artificial intelligence algorithms, such as logistic regression or neural networks, should be considered an outcome. This paper discusses the methodology for extracting information from signal echoes and how they were transported and aggregated. The data extracted in this way were used to support user navigation through a building, optimize energy based on presence information, and increase the facility's overall security level. A band from 5 GHz to 6 GHz was chosen as the carrier frequency of the signals, representing a compromise between energy expenditure, range, and the properties of wave behavior in contact with different types of matter. The system includes proprietary hardware solutions that allow parameters to be adjusted over the entire range and guarantee adaptation for RTI (radio tomography imaging) technology. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of the impact of selected parameters of the operating environment on the energy consumption and reliability of haulage in surface mining. The analysis is based on a cyclic haulage system in a limestone open pit. The results of the calculations show that maintaining the operating environment in good technical condition has a positive effect on the haulage process and a direct or indirect effect on the operating costs, the analysis of which is also presented in the main body of the article. The analysis was carried out for a full year's production, taking into account actual operating and maintenance downtime. The results of similar analyses can be used as a basis for deciding on the type of truck to be used for transport or for reconfiguring transport routes. In addition to the economic and operational aspects of energy consumption and reliability, the environmental aspect cannot be overlooked. The comparison of two variants of mining conditions shows that a modification of the haul road surface leads to a significant reduction in fuel consumption. Depending on the type of vehicle, fuel consumption can be reduced by almost 20%. The potential reduction in fuel consumption directly translates into lower exhaust emissions, which is an important element of an environmentally sustainable approach to mining transport, and greater reliability increases efficiency and reduces the carbon footprint of the vehicle. [ABSTRACT FROM AUTHOR]

The sustainability of the transport sector is targeted by various policies adopted by the European Union, and their impact must be constantly monitored in order to maximize the desired objective. This paper, through a two-stage investigation, aims to present a systemic approach of the sustainability dimensions in transport and to introduce an innovative technique to analyze the interdependencies between them. In the first stage, relevant indicators were selected from the Eurostat database for the content of four dimensions: economic, environmental, social and technological. The robustness of the developed dimensions was assessed and validated through a confirmatory factor analysis. In the second stage, a Gaussian graphical model was estimated as a technique integrating graphical and statistical modeling to identify complex structures of linkages between variables (as components of each dimension of sustainability). The structure of the network clearly highlights the dependence of transport on fossil fuel consumption as the main determinant of pollution in the sector (CO2 emissions). In addition, the central role of railways in decarbonizing transport is highlighted, in contrast to the limited, and isolated at one end of the network, role of electric vehicles. The findings support that affordability of this new technology plays an important role in its impact on zero-emission transition. Concentrating on the period 2013–2022, at EU27 level, the results are relevant in the context of decarbonization policies, offering useful insights both for future research and policy makers. [ABSTRACT FROM AUTHOR]

To tackle the variability of distributed renewable energy (DRE) and the timing differences in load demand, this paper perfects the integrated layout of "source-load-storage" energy control in virtual power plants (VPPs). Introducing a comprehensive control approach for VPPs of varying ownerships, and encompassing load aggregators (LAs), a robust and cost-efficient operation strategy is proposed for VPP clusters. Initially, the influence of real-time electricity prices on cluster energy utilization is taken into account. Flexible shared electricity prices are formulated cluster-wide, based on the buying and selling data reported by each VPP, and are distributed equitably across the cluster. Following this, a flexible supply and demand response mechanism is established. With the goal of minimizing operational costs, this strategy responds to demand (DR) on the end-user side, instituting shifts and reductions in electricity and heat loads based on electricity and heat load forecasting data. On the supply side, optimization strategies are developed for gas turbines, residual heat boilers, and ground-source heat pumps to restrict power output, thus achieving economical and low-carbon cluster operations. Finally, the efficacy of the proposed optimization strategy is demonstrated through tackling numerous scenario comparisons. The results showcase that the proposed strategy diminishes operational costs and carbon emissions within the cluster by 11.7% and 5.29%, respectively, correlating to the unoptimized scenario. [ABSTRACT FROM AUTHOR]

Behind the meter (BTM) distributed energy resources (DERs), such as photovoltaic (PV) systems, battery energy storage systems (BESSs), and electric vehicle (EV) charging infrastructures, have experienced significant growth in residential locations. Accurate load forecasting is crucial for the efficient operation and management of these resources. This paper presents a comprehensive survey of the state-of-the-art technologies and models employed in the load forecasting process of BTM DERs in recent years. The review covers a wide range of models, from traditional approaches to machine learning (ML) algorithms, discussing their applicability. A rigorous validation process is essential to ensure the model's precision and reliability. Cross-validation techniques can be utilized to reduce overfitting risks, while using multiple evaluation metrics offers a comprehensive assessment of the model's predictive capabilities. Comparing the model's predictions with real-world data helps identify areas for improvement and further refinement. Additionally, the U.S. Energy Information Administration (EIA) has recently announced its plan to collect electricity consumption data from identified U.S.-based crypto mining companies, which can exhibit abnormal energy consumption patterns due to rapid fluctuations. Hence, some real-world case studies have been presented that focus on irregular energy consumption patterns in residential buildings equipped with BTM DERs. These abnormal activities underscore the importance of implementing robust anomaly detection techniques to identify and address such deviations from typical energy usage profiles. Thus, our proposed framework, presented in residential buildings equipped with BTM DERs, considering smart meters (SMs). Finally, a thorough exploration of potential challenges and emerging models based on artificial intelligence (AI) and large language models (LLMs) is suggested as a promising approach. [ABSTRACT FROM AUTHOR]

This manuscript explores the relationship between the economic awareness (as a part of energy awareness) of Polish households and their sustainable energy consumption practices. Sustainable consumption is measured by the frequency of behaviors such as turning off electrical devices when not in use, removing mobile device chargers from sockets, switching off lights when leaving a room, preferring showers over baths, using washing machines and dishwashers only when full, and purchasing energy-efficient appliances and light bulbs. Economic awareness is gauged through variables such as knowledge of electricity tariffs, understanding of electric bill components, awareness of electricity prices, exact knowledge of electricity expenses, electricity usage in kWh, knowledge of effective energy-saving methods, and familiarity with the energy efficiency classes of appliances and light bulbs. This study presents profiles of households with high and low economic awareness regarding their electricity expenditures and examines how these profiles differ in their sustainable energy consumption behaviors. This research is based on a survey of 1407 Polish households conducted online in 2023. Data collected from the survey were subjected to statistical analysis and are presented in tables and graphs. The findings are discussed in the context of the existing literature in the field, highlighting the implications of economic awareness on sustainable energy consumption practices. This research contributes to understanding how economic knowledge influences energy-saving behaviors among Polish households, providing insights for policymakers and energy conservation initiatives. One of the key findings of this paper is the significant association between economic awareness, energy-saving knowledge, and the adoption of sustainable energy consumption behaviors among Polish households. This study reveals that households with higher levels of economic awareness demonstrate a notably higher frequency of practices related to sustainable energy consumption compared to those with lower economic awareness. Similarly, households equipped with greater knowledge about energy-saving techniques exhibit a higher propensity to adopt energy-efficient behaviors. This underscores important roles of economic literacy and education in fostering behavioral changes towards more sustainable energy practices, highlighting the importance of targeted interventions and educational campaigns aimed at enhancing economic awareness and promoting energy-saving knowledge among consumers. [ABSTRACT FROM AUTHOR]

The strategic objective of world climate policy is the decarbonization of industries, aiming to achieve "net-zero" emissions by 2050, as outlined in the European Green Deal and the Paris Agreement. This transition entails increasing the utilization of renewable energy sources (RES) in industrial energy consumption, thereby transforming economies from reliance on fossil fuels to sustainable alternatives. However, this shift poses a significant challenge for many EU countries, with varying degrees of success in adaptation. This paper investigates the process of decarbonizing industries by analyzing trends in the adoption of RES in EU countries and evaluating their progress toward climate targets. Utilizing time series analysis of production, total energy usage, and the proportion of renewables in industrial energy consumption, the study compares two groups of countries: longstanding EU members and newer additions. The aim is to forecast the trajectory of RES integration in industry and assess the feasibility of meeting the targets outlined in the European Green Deal. The findings reveal a considerable gap between the set targets and projected outcomes, with only a few countries expected to meet the EU's 2030 goals. This is highlighted by disparities in RES shares across member states, ranging from 0.0% to 53.8% in 2022. Despite notable increases in the absolute use of renewable energy, particularly in central and eastern European nations, substantial challenges persist in aligning industrial sectors with EU decarbonization objectives. [ABSTRACT FROM AUTHOR]

Under the challenge of global energy transition, coal-fired cogeneration systems are undergoing a technical revolution towards enhanced efficiency, heating capacity, and flexibility. In this paper, four schemes using a steam ejector integrated into a cogeneration system are designed. Considering operational safety, integrated locations are selected at the front and back of high- and medium-pressure turbines. Subsequently, the thermodynamic and operational characteristics under both design and off-design conditions are analyzed based on a model built in EBSILON Professional. Finally, a sensitivity analysis of the heating process is conducted. The results show that the integration of steam ejectors can increase the waste heat recovery ratio of exhaust steam by 18.42–45.61% under design conditions. The largest waste heat recovery ratio is obtained in System 4, resulting in the power generation efficiency ( η g ) and gross energy utilization efficiency ( η p ) of 81.95% and 65.53%, respectively. Meanwhile, the steam ejector can expand the power-load regulation range of the cogeneration system, and System 4 has the lowest lower power limit among all the systems. The η p values of Systems 1–4 reach extreme values at different mixed steam pressures of the ejector. Increasing the pinch point temperature difference reduces the power load η g and η p of Systems 1–4. The results provide technical solutions for improving the heating capacity and efficient and flexible operation of cogeneration systems. [ABSTRACT FROM AUTHOR]

As the demand for sustainable energy solutions grows, there is a critical requirement for continuous innovation to optimize the performance and safety of renewable energy systems (RESs). Closed-loop digital twins (CLDTs)—synchronized virtual replicas embedded with real-time data and control loops to mirror the behavior of physical systems—have emerged as a promising tool for achieving this goal. This paper presents a systematic literature review on the application of digital twin (DT) technology in the context of RESs with an emphasis on the impact of DTs on the efficiency, performance, and safety assurance of RESs. It explores the concept of CLDTs, highlighting their key functionalities and potential benefits for various renewable energy technologies. However, their effective implementation requires a structured approach to integrate observation, orientation, decision, and action (OODA) processes. This study presents a novel OODA framework specifically designed for CLDTs to systematically identify and manage their key components. These components include real-time monitoring, decision-making, and actuation. The comparison is carried out against the capabilities of DT utilizing the OODA framework. By analyzing the current literature, this review explores how DT empowers RESs with enhanced efficiency, reduced risks, and improved safety assurance. [ABSTRACT FROM AUTHOR]

Nonlinear loads, crucial components of power system grids, pose a challenge due to harmonics injection. This work tackles this issue with a novel modified green plug–switched filter compensation scheme using fuzzy logic controllers. This innovative scheme presented in this paper utilizes dual action pulse width modulation to ensure switching functions from harmonics reduction and capacitive compensation for inrush nonlinear-type AC loads. The scheme's multi-loop regulations and online switching effectively handle dynamic-type slow-acting inrush, motorized- and other rectifier-type nonlinear loads, enhancing the power factor, power quality at source and load buses, and reducing the total harmonics distortion at the key source and sensitive nonlinear load buses. A simulation model in the MATLAB/SIMULINK-2023b software environment demonstrates the efficiency of the proposed FACTS technique. The modulated dual mode switched filter-capacitive compensation scheme controlled by a fuzzy logic controller ensures less harmonics distortion and improved voltage stabilization. The results show that voltage, current, active power, reactive power, power factor regulation, and effective energy utilization are achievable with the designed Flexible AC Transmission System-Modulated Filter Capacitor Compensation–Switched Filter Compensator (FACTS-MFCC-SFC). The switched modulated AC green plug filter significantly improves power quality and enhances power factor in cases of inrush and nonlinear loads. [ABSTRACT FROM AUTHOR]

To achieve sustainable development goals and meet the demand for clean and efficient energy utilization, it is imperative to advance the penetration of renewable energy in various sectors. Energy storage systems can mitigate the intermittent issues of renewable energy and enhance the efficiency and economic viability of existing energy facilities. Among various energy storage technologies, thermocline heat storage (THS) has garnered widespread attention from researchers due to its stability and economic advantages. Currently, there are only a few review articles focusing on THS, and there is a gap in the literature regarding the optimization design of THS systems. Therefore, this paper provides a comprehensive review of the recent research progress in THS, elucidating its principles, thermal storage materials, applications, and optimization designs. The novelty of this work lies in the detailed classification and analysis of various optimization designs for THS, including tank shape, aspect ratio, inlet/outlet configuration, thermal energy storage materials arrangement, operating strategies, and numerical model optimization approaches. The limitations of existing research are also identified, and future perspectives are proposed, aiming to provide recommendations for THS research and contribute to the development and promotion of THS technology. [ABSTRACT FROM AUTHOR]

With the urgent global need to limit warming to 2 °C as well as a localized need in our case study to address rising energy demand amid electrical and thermal network limitations, a critical examination of demand-side energy reductions and the concept of energy sufficiency is needed. This paper contributes to the sparse literature on bottom-up analysis by utilizing Iceland—a leader in renewable energy generation—as a case study to explore the socio-economic factors influencing energy footprints. Our findings reveal significant energy footprints across various consumption domains, particularly housing and mobility, influenced by income levels, urbanization, and lifestyle choices. The study highlights the paradox of a high renewable energy supply leading to potential misconceptions regarding abundant and low-cost energy, resulting in substantial energy consumption-related environmental impacts. Using detailed household consumption survey data, this research provides insights crucial for developing sustainable energy policies that not only target technological advancements but also address the need for a reduction in energy demand and a shift towards energy sufficiency. This work marks a contribution to the literature through the provision of a case study of low income inequality and high energy footprints in a highly renewable energy system context. Further, this work is useful for Icelandic and international policymakers to understand in such high-demand contexts which consumption domains would be most relevant for sufficiency policies. This comprehensive analysis opens pathways for future research to further explore the intersections of energy consumption, socio-economic factors, and well-being, offering a nuanced understanding necessary for crafting sufficiency and demand-side policies aimed at a sustainable energy future. [ABSTRACT FROM AUTHOR]

Improving the energy efficiency of enterprises is one of the key means to solve the problem of energy shortage. It is of great significance to investigate how environmental information disclosure (EDI) promotes the green total factor energy efficiency (GTFEE) of enterprises. Based on this, this study calculates the GTFEE of enterprises by combining the database of Chinese manufacturing and the pollutant emission of industrial enterprises and investigates the impact of EDI on the GTFEE of manufacturing industries by using a difference-in-difference model. The following is found: (1) EDI can significantly promote the manufacturing enterprises' GTFEE, and the results are still valid after a series of robustness tests; (2) Mechanism analysis shows that EDI can improve the GTFEE of manufacturing enterprises by promoting technological innovation and optimizing energy structure; (3) The heterogeneity analysis shows that EID is more positive on firms' GTFEE in the eastern than western regions. The positive impact is greater for non-state-owned, low-energy consumption, export, and polluting enterprises. The findings of this paper provide a theoretical basis and practical enlightenment for the government to promote the green development transformation of enterprises. [ABSTRACT FROM AUTHOR]

Demand response management (DRM) plays a crucial role in the prospective development of smart grids. The precise estimation of electricity demand for individual houses is vital for optimizing the operation and planning of the power system. Accurate forecasting of the required components holds significance as it can substantially impact the final cost, mitigate risks, and support informed decision-making. In this paper, a forecasting approach employing neural networks for smart grid demand-side management is proposed. The study explores various enhanced artificial neural network (ANN) architectures for forecasting smart grid consumption. The performance of the ANN approach in predicting energy demands is evaluated through a comparison with three statistical models: a time series model, an auto-regressive model, and a hybrid model. Experimental results demonstrate the ability of the proposed neural network framework to deliver accurate and reliable energy demand forecasts. [ABSTRACT FROM AUTHOR]

This paper investigates the theoretical foundation for developing renewable geothermal resources locally. For this reason, we pay attention to the role of communities in geothermal development. We derive it from the integral characteristics of geothermal energy next to the shift in the energy transition policies to focus on managing green resources locally. This study presents arguments for a framework that approaches geothermal resources as an endogenous factor of community development. To analyse it, we create a model that explains the local economic characteristics of geothermal exploitation beyond its geological conditions. It aims to conceptualise a community-based geothermal development standard referring to the endogeneity principle. Geothermal energy is given attention since the characteristics of this resource determine its use locally. This induces the internalisation of labour and technology in the local economic system, a specific condition for local geothermal projects where a community remains a prime beneficiary. We argue that the role of communities in geothermal exploitation is pivotal in the process of green growth for further expansion of geothermal energy use. [ABSTRACT FROM AUTHOR]

Energy management systems allow the Smart Grids industry to track, improve, and regulate energy use. Particularly, demand-side management is regarded as a crucial component of the entire Smart Grids system. Therefore, by aligning utility offers with customer demand, anticipating future energy demands is essential for regulating consumption. An updated examination of several forecasting techniques for projecting energy short-term load forecasts is provided in this article. Each class of algorithms, including statistical techniques, Machine Learning, Deep Learning, and hybrid combinations, are comparatively evaluated and critically analyzed, based on three real consumption datasets from Spain, Germany, and the United States of America. To increase the size of tiny training datasets, this paper also proposes a data augmentation technique based on Generative Adversarial Networks. The results show that the Deep Learning-hybrid model is more accurate than traditional statistical methods and basic Machine Learning procedures. In the same direction, it is demonstrated that more comprehensive datasets assisted by complementary data, such as energy generation and weather, may significantly boost the accuracy of the models. Additionally, it is also demonstrated that Generative Adversarial Networks-based data augmentation may greatly improve algorithm accuracy. [ABSTRACT FROM AUTHOR]

The challenges posed by climate change and global warming loom large, necessitating a critical initial step towards the long-term growth and the enhancement of both environmental and operational efficiency. Within the energy sector, renewable energy sources are gaining increasing prominence. Consequently, traditional oil and gas companies (OGC) are undergoing a gradual transformation into comprehensive energy corporations, aligning themselves with energy transition policies. This paper examines two types of efficiency measures—operational and environmental—for the 20 largest OGC during the period of 2010–2019. Secondly, this research aims to explore the effect of the global energy transition on both environmental and operational efficiency. Based on three estimation methods, two estimation steps are used in this research. In the first step, the True Fixed Effect (TFE) model and the Battese and coelli (1995) SFA model are applied to evaluate, measure and compare the environmental and operational efficiency scores. In the second step, the TFE model and GMM approach for the dynamic panel data model are used to explore, evaluate and verify the effect of global energy transition on the environmental and operational efficiency of the largest 20 OGC in the world. The results reveal that the average operational efficiency of major OGC measured using the BC.95 model and TFE model is 66% and 85%, respectively, and the overall average level of environmental efficiency for OGC over a 10-year period is 31% (based to B.C.95 model) and 13% (based to TFE model). Our findings reveal that biofuels, solar and hydropower contribute to promote the operational and environmental efficiency of the largest 20 OGC. However, the analysis suggests that while the global energy transition significantly influences and bolsters environmental efficiency, its effect on operational efficiency among these major OGC remains less pronounced and insufficient. [ABSTRACT FROM AUTHOR]