Search

How to effectively utilize renewable energy and improve the economic efficiency of microgrid system and its ability to consume renewable energy has become one of the main problems facing China at present. In response to this challenge, this paper establishes a multiobjective capacity optimization model with the minimum levelized cost of energy, the maximum proportion of renewable energy consumption, and the minimum comprehensive system cost. Based on this model, a new improved beluga whale optimization algorithm is proposed to solve the multiobjective optimization problem in the capacity allocation process of wind–solar–storage microgrid system with the goal of ensuring that the microgrid can meet the maximum load demand at different moments throughout the year. In this paper, opposition‐based learning, artificial bee colony, dynamic opposite, and beluga whale optimization are combined to improve the population diversity and convergence accuracy, thereby enhancing the optimization performance of the algorithm. Finally, after finding the optimal Pareto front solution, the Technique for Order Preference by Similarity to an Ideal Solution is used to help decision‐makers select the optimal solution. Using real load data and meteorological data, the results of this paper show that the multiobjective capacity allocation optimization method of grid‐connected scenic storage microgrid system based on the improved beluga whale optimization algorithm can improve the economics of the wind–solar–storage microgrid system and promote the photovoltaic consumption simultaneously, providing a solution for the realization of low‐carbon power and regional economic development. The best‐found levelized cost of energy for the wind–solar–storage microgrid system is 0.192 yuan/kWh. [ABSTRACT FROM AUTHOR]

Since the "double carbon" target was proposed in 2020, emissions reduction has become the focus of the Chinese government's work. Industrial development is a crucial factor contributing to the increase in carbon emissions. Therefore, implementing carbon reduction in the industrial sector is an important part of China's goal of "double carbon." In this context, this paper uses a three‐stage data envelopment analysis model to calculate the green total factor productivity (GTFP) of 18 industry sectors in Shanxi Province. The results show that: (1) the external environment has influence on the GTFP of energy revolution reform pilot area industrial sectors, and the efficiency value of two industries is overestimated before excluding environmental factors; (2) the industry difference of GTFP is significant, among which pharmaceutical manufacturing industry has the greatest promoting effect on GTFP, and ferrous metal mining and dressing industry has the greatest inhibiting effect on GTFP; (3) there is a serious redundancy in R&D investment of energy revolution reform pilot area in China, and only six industries belong to zero redundancy. (4) To reflect the GTFP of various industrial sectors more clearly, this paper divides four industries: "Double‐high" industry, "High‐low" industry, "Low‐high" industry, and "Double‐low" industry. [ABSTRACT FROM AUTHOR]

In the chemical flooding process, the premature breakthrough of chemical agents in production wells results in a large waste of chemical agents and increases the volume and processing difficulty of the produced fluids. The early warning method of chemical agent channeling can predict the strength of agent channeling in advance. The practice of chemical flooding shows that the production performance can be used for early warning of chemical agent channeling. In this paper, we analyze the relationship between cumulative oil production and cumulative polymer production of production wells in polymer–surfactant flooding. Three types of curves according to the enhanced oil production characteristics of chemical flooding, including convex type, S‐type, and concave type. We use the drop speed of the water–oil ratio and the rapid‐decline speed of water cut as early warning indicators to predict the channeling coefficient. A Latin hypercube experimental design method is used to design a polymer–surfactant flooding scheme with the main control factors of the channeling coefficient and early warning indicators. Numerical simulation is used to calculate samples of the channeling coefficient and early warning indicators under various conditions. The drop speed of the water–oil ratio reference value model and the rapid‐decline speed of the water cut reference value model are determined with a multiple regression method. A prediction model for the chemical agent channeling coefficient is established using the deviation coefficient of an early warning index. The method is applied in the Ng54‐61 polymer–surfactant flooding pilot area in the west of the Gudong Seventh District, Shengli Oilfield, China, and the error between the predicted result and the actual value is less than 10%. This research is helpful in taking effective antichanneling measures and improving the oil recovery degree of chemical flooding reservoirs. [ABSTRACT FROM AUTHOR]

In the circumstances of "Carbon Peak," it is imminent to implement green construction technology in the construction industry as it is a major source of CO2 emissions. Nevertheless, little study has been done on the impact of self‐face awareness (SA) on green building project performance (GP). On the basis of a large‐scale questionnaire survey in China and an in‐depth analysis of the four categories (cognition, behavior, satisfaction, and performance), this paper has added an SA dimension, and proposed a new impacting path. Then, based on the improved conceptual model for measuring the impact of green construction behavior on GP, this paper has conducted empirical tests by using a large sample of questionnaire data and partial least square‐structural equation modeling method. The results show that: (1) green construction behavior has a positive impact on GP, and the impact of perceived behavioral control of green construction technology is most significant for promoting green construction in the industry, and SA has a significant positive effect on green construction in the industry; (2) environmental perception and perceived behavioral control for green construction technology play a mediating role; and (3) significant differences indeed exist in the multigroup analysis, and the biggest difference is working experiences in the engineering field. Finally, this paper has proposed corresponding management implications based on the above findings. The main contribution of this study is that this study has developed a new dimension (SA) to the model considering Chinese national and cultural differences, in an attempt to reveal the impact of green construction technology on GP in the Chinese context. In addition, the promotion of green construction (PGC) in the construction industry was also added based on the sustainability perspective, which is the first attempt to explore the role of the PGC. [ABSTRACT FROM AUTHOR]

From core observations of shales of the Niutitang formation in the northern part of Guizhou Province, China, calcite was often found to act as a natural fracture filler and affect the extension of fractures in hydraulic fracturing. Therefore, it is crucial to understand the tensile mechanical behavior of shales by calcite veins. In this paper, by computed tomography scanning of shales containing calcite veins of different dip angles from the Niutitang formation, a three‐dimensional numerical model reflecting the internal fine structure of the shale was constructed. Direct tensile numerical simulations were carried out to investigate the effect of calcite veins at different angles on the fine‐scale damage process and mechanical properties of shale. The experimental results show that the tensile capacity of the shale increases with the increase in calcite veins. Depending on the dip angle of the calcite vein, the damage pattern of the shale is divided into three types of damage: pull‐off damage along the calcite vein, jagged damage, and horizontal damage perpendicular to the loading method. At high dip angles, the shale damage is more intense and the fracture network more complex. The temporal and spatial characteristics of the acoustic emissions provide a good indication of the microscopic behavior of the shale specimens during the damage process. The box dimension method was used to calculate the fractal dimension of the shale specimens at the final damage, and it was found that the damage was more intense and the fracture network was more complex at high dip angles, and there was an angular threshold. [ABSTRACT FROM AUTHOR]

A convenient and effective method based on vector analysis was proposed in this paper to quantitatively describe the pattern of the wind speed distribution curve. This method can accurately describe the steepness of the single‐peak curve by using two parameters of concentration degree (CD) and concentration period (CP). Through the analysis of wind speed data in China over the past 40 years, this paper found that regional wind resources with larger CD were poorer, while regional wind resources with larger CP were richer. In addition, there were obvious cubic relationships between the CP and the average wind power density. These two parameters could reflect the richness of wind energy and realize the comparisons of wind resources across time and scales. In comparison with conventional approaches, this method is simpler and avoids fitting process, which has broad promotion prospects in the field of power grids. [ABSTRACT FROM AUTHOR]

Sanding production of the underground gas storage (UGS) in the depleted reservoir will cause the decline of effective storage capacity, and the erosion of well string and auxiliary equipment, and other engineering problems. A deep understanding of the sanding production contributes to maintaining the injection and production capacity of gas storage and the long‐term safety of the UGS. In this paper, core samples of five main sedimentary microfacies were drilled from the UGS in middle China. The mechanical properties with different conditions of the moisture content in multi‐cycling injection–production process were tested. The critical drawdown pressure (CDP) calculation methods for the UGS were established based on the stress analysis near the wellbore and the Mogi–Coulomb criterion. Adopting the finite element method simulation on the geological model of the target UGS, the geo‐stress of the formation was calculated by inversed analysis and validated based on the Kaiser effect of rock. Then, the CDP of two target wells of the UGS were investigated. The effects of the water moisture and the cycling times of the injection–production process on the CDP were also analyzed. The geo‐stress distribution shows that the horizontal maximum principal stress ranges from 53 to 68 MPa, and the horizontal minimum principal stress is 46–58 MPa in the target reservoir section, and the vertical minimum principal stress is 69–77 MPa in the target reservoir. The calculated CDP changed with the types of the sedimentary microfacies in the range of [6.27, 8.77] MPa, in which the CDP of the mixed mud and sand flat sedimentary facies was the lowest. The weakness of the CDP with the increasing of the moisture content and the cycling times were analyzed quantitively. [ABSTRACT FROM AUTHOR]

The security of natural gas supply and demand has always been an important topic, and as a result, analyzing and predicting the supply and demand of natural gas has received considerable attention from researchers. Numerous studies have extensively researched the supply and demand of natural gas. The main purpose of this study is to explore the supply‐demand balance mechanism for natural gas security. A system dynamics model is constructed to assess the supply and demand of natural gas in Sichuan Province, China. A new system dynamics model based on domestic gas, production gas, ecological environment and natural gas supply is proposed. The study considers four scenarios: natural development, economic priority development, environmental priority development and coordinated development. The results show that the rapid economic development has led to an excessive environmental carrying capacity, a larger gap between natural gas supply and demand, a decline in the quality of life of residents, and even affected the energy security of Sichuan Province and China. The findings also show that people's overprotection of the environment can lead to slow economic development, which prevents it from achieving its desired goals. The coordinated development scenario in this paper not only ensures the production of natural gas and the quality of life of residents, but also is an optimal scheme with low energy consumption and pollution. According to the research conclusions, considering the overall situation of China's energy security and the situation in Sichuan Province, the author proposes reforms from the supply and demand sides of natural gas. [ABSTRACT FROM AUTHOR]

The industrial sector is China's major element of energy consumption and carbon emissions, and carbon emissions reduction in industrial parks has become an important foothold in carbon reduction work. Predicting the future evolution trend of carbon emissions in industrial parks under different policy orientations is of great significance for China to achieve the carbon emissions peaking and carbon neutrality goals. Based on the current status of electricity consumption and carbon emissions in industrial parks, this paper takes a light industrial park as the research object, analyzes the source of carbon emissions in this park, combines the characteristics of resource endowment and industrial structure, and considers the factors influencing society, load curve, energy supply and carbon sink, thus constructing a system dynamics model of carbon emission evolution for this park. Different influencing factors are selected to set multiple target scenarios, and the GDP, carbon emissions, carbon emissions reduction and near‐zero carbon evaluation coefficient of light industrial parks are used as characterization indicators for simulation analysis. The analysis results revealed that the comprehensive scenario set by increasing the maximum installed capacity of renewable energy units and raising the proportions of environmental and science and technology inputs while adjusting the industrial growth rate of the park performed best. In this scenario, the economic development of the park and the process of carbon emissions reduction are considered. [ABSTRACT FROM AUTHOR]

With the continuous advancement of urbanization, the contradiction between urban development and environmental resources has become increasingly prominent, and environmental pollution has become increasingly serious. To fundamentally solve the problems of environment, energy, and low carbon, we must rely on the intelligence of energy. This paper aims to study the sustainable development of China's intelligent energy industry based on artificial intelligence and low‐carbon economy. In view of the problems existing in the optimization of power generation industry, this paper uses the annual load, electricity price, weather, and climate data of a southern power grid, uses the statistical variation particle swarm optimization algorithm, uses the historical runoff and rainfall data to optimize it, and studies the analysis methods, characteristics and laws of short‐term load, electricity price and runoff, as well as the uncertain factors affecting their changes. The experimental results show that the predicted price is close to the actual price, and the median error of each period is <1% in statistical analysis, so the forecast value can be used to replace the actual value for scheduling. This method makes full use of the adaptive mutation in the late stage of particle optimization, and introduces the mechanism of particle size selection, which fully ensures the diversity of particles and improves the search ability of particles. [ABSTRACT FROM AUTHOR]

Carbon trading mechanism is an effective means to control greenhouse gas emissions. This paper focuses on the low‐carbon economic operation of the integrated energy system under carbon trading mechanism in China. The integrated energy system includes the energy storage, ground source heat pump, and other equipment. The objective of this paper was to minimize the annual total cost of the system considering the carbon trading cost and study the operation modes under different carbon trading prices by commercial optimization software. The simulation results show the operation modes in summer are changed obviously with the increase of the carbon trading prices, while the operation modes in winter basically are not changed with the fluctuation of the carbon trading prices; under the carbon trading mechanism, the integrated energy system can not only reduce the carbon emissions, but also reduce the annual total cost through carbon trading, which shows its advantages and good development prospect. In addition, the setting of the carbon emission quota has a direct impact on the economy of the enterprises. Furthermore, the ground source heat pump and the electric refrigeration units can stabilize the fluctuation of the equipment output caused by the change of natural gas prices in this integrated energy system. [ABSTRACT FROM AUTHOR]

Coal‐fired thermal power must be flexible to enable the grid absorption of inconsistent photovoltaic (PV) and wind power. Combined heat and power (CHP) coal‐fired plants are the primary source for district heating systems. This paper uses a 330 MW subcritical CHP unit as an example to carry out the study. With the promotion of building energy efficiency, when the thermal index is reduced to below 20 W/m2, the low‐load operation of CHP can meet the wind power and PV feed‐in demand and guarantee residential heating without the need for flexibility modification. Meanwhile, more renewable energy generation can reduce carbon emissions from the power supply, further contributing to reducing carbon emissions from buildings. The impacts of different envelope parameters and supplementary heat sources on building carbon emissions are also studied. The conclusion shows that the degree of their impact on carbon emissions ranks as ESMs (energy supply modes) > Factor D (infiltration N50) > Factor A (external wall heat transfer coefficient) > Factor C (window heat transfer coefficient) > Factor B (roof heat transfer coefficient). When the building's heating energy consumption gradually decreases, the distributed heat pump unit can replace the coal‐fired boiler to supply the peak heat load demand. In the future, China's district heating systems can be gradually changed from the current CHP and coal‐fired boilers to CHP and distributed heat pumps. [ABSTRACT FROM AUTHOR]

Great quantities of energy are consumed by heat pump drying systems (HPDSs), such as tobacco drying. It can be reduced by increasing evaporating temperature using waste heat. In this paper, based on the case of two main industries in southwest China (monocrystalline silicon industry and tobacco industry), a novel integrated HPDS especially for the tobacco drying using waste heat from single crystal silicon furnaces is proposed. It is then analyzed from an energetic and economical perspective, investigating the effects of heat exchanger areas on system performance. To simultaneously minimize system CO2 emissions and total annual cost (TAC), a multiobjective optimization using nondominated sorting genetic algorithm is conducted based on the support vector regression model, which has been rarely reported for integrated HPDS improved by waste heat. The final optimum solution on the Pareto optimal front is selected using different decision‐making methods (LINMAP, TOPSIS, and fuzzy decision method), and are compared with the performance of the initial system. The results show that the TOPSIS method is most suitable in three decision‐making methods with a great reduction in mCO2 ${m}_{C{O}_{2}}$ (−12.7%) and nearly unchanged in TAC (+0.5%) compared with the initial solution. And the decreases in mCO2 ${m}_{C{O}_{2}}$ and TAC of the optimized system is as large as 50% and 1/3, compared with traditional vapor compression heat pump dryer without heat recovery of the monocrystal silicon furnace. [ABSTRACT FROM AUTHOR]

Wind power generation does not emit greenhouse gases or pollutants, but there are some carbon emissions from the manufacturing, transportation, operation, and waste disposal of wind turbines. Directly driven permanent magnet and doubly fed asynchronous wind turbines currently have the largest market share in China, but few Chinese studies have compared their differences in carbon reduction potential. This paper uses life cycle assessment (LCA) to quantitatively analyze the full life cycle carbon emissions of the two wind turbines to determine which type of wind turbine has greater carbon reduction potential, obtaining the following results. (1) The full life cycle greenhouse gas emissions of 2.5 MW directly driven permanent magnet and doubly fed asynchronous wind turbines are 8.48 and 10.43 g CO2/kWh, respectively. The direct‐driven permanent magnet wind turbine is superior in terms of carbon reduction. (2) The stage with the greatest impact and the greatest difference between the two wind turbines in the full life cycle is the production stage, during which the carbon emissions of the directly driven permanent magnet and doubly fed asynchronous wind turbines are 1.045 × 106 and 1.210 × 106 kg, respectively. (3) According to sensitivity analysis, proper waste disposal and transportation can reduce carbon emissions from wind turbines. These research findings can be used to help achieve carbon peaking and neutrality goals, as well as the technological development of wind power enterprises. [ABSTRACT FROM AUTHOR]

In coastal cities, a large amount of cold energy is released into the nearby seawater during the process of regasification of liquefied natural gas (LNG) at the receiving terminal, and meanwhile, a large amount of exported and/or imported foods need to be frozen by bulk cold energy near the sea. In this paper, a new multistage cold energy recovery/utilization system is investigated to link the LNG cold energy directly to supply the coastal cold store. This design uses a realistic case in Ningbo LNG receiving station in China, and for the very first time considers how to utilize the LNG cold energy in an efficient manner regarding the technical, economic, and environmental benefits. A three‐stage LNG cold energy utilization system is designed and evaluated by considering different temperatures, pressures, and heat exchange parameters. Compared to conventional electric‐driven cold stores, the proposed multistage cold energy recovery/utilization system has a much cheaper capital cost during the initial investment stage, and also avoids the utility power consumption during the daily operation period. In the case study, from Ningbo LNG receiving station to a 10 MW class cold store, the proposed multienergy system can save the energy of 20.05 kilotons of standard coal, and the carbon emission reduction is up to 1.49 × 108 kg per year. [ABSTRACT FROM AUTHOR]

Based on the full‐sample panel data from 23 provinces and cities in China from 2013 to 2020, this paper studies the influences of environmental regulations on regional carbon emission efficiency in China under the background of opening carbon emission trading after dividing the country into high, medium, and low emission areas with emission quantity as the classification standard and constructing a regression model. The experiment reveals that the environmental regulation strength and carbon dioxide emission efficiency are positively correlated with each other in the first place. Second, there exists a positive correlation between environmental regulation strength and carbon dioxide emission efficiency in different emission regions, while in terms of the impact of environmental regulation on carbon emission efficiency, it influences the medium emission areas most, followed by low emission areas, and the high emission areas to the least. Then, current domestic environmental regulation is effective and plays a positive role in improving carbon emission efficiency and promoting the development of a low‐carbon economy in China. [ABSTRACT FROM AUTHOR]

In this paper, a novel energy storage technology of a gravity‐enhanced compressed air energy storage system is proposed for the first time, aiming to support the rapid growth of solar and wind capacity. With air storage formed by the shaft well, gravity piston, and seal membrane, the proposed system could achieve constant operating pressure, high storage efficiency, and large storage capacity. Electricity charged into this system is simultaneously transformed and stored in the thermal, pressure potential, and gravitational potential forms. The operating properties of the proposed system are simulated and analyzed with the commercial software Thermoflex V29. Results show that both the storage pressure and the well radius have essential influences on the performance of the newly proposed system. The theoretical energy storage efficiency of the proposed system is in a scope of 63.58%–65.50% with a storage pressure range of 40–100 bar. Economic analysis based on the time‐of‐use price policy in China suggests that the optimum levelized cost of storage (LCOS) happens at the storage pressure of 70 bar and a well radius of 8 m. Besides, considering different plant cost factors that reflect the total investment of a power plant, the optimum LCOS is 1.09–1.26 CNY/kWh. Moreover, the specific exergy cost of the discharged electricity is assessed to be 0.51 CNY/kWh or so, which is significantly more profitable compared with the given electricity price of 1.15 CNY/kWh at off‐peak. [ABSTRACT FROM AUTHOR]