Search

Marine fish industries discard huge amounts of fish waste every year, which in turn impose problems of environmental pollution and loss of economic value. About 75% of the total weight of fish is discarded in the form of skins, bones, fins, heads, guts, and scales, which contain high levels of collagen type I. Generally, major sources for commercial collagens are the skin and bone of pigs and cows; however, these sources are chiefly associated with the risk of transference of zoonotic diseases or religious issues. Traditional protocols applied to the extraction of collagen are outdated, mainly with respect to present demands to develop more sustainable processes. This work explores the use of sustainable solvents, such as deep eutectic solvents (DES), to develop a more efficient, cost-effective and biocompatible process to extract collagen from waste from the fish industry waste. The extraction of collagen from the skin of Atlantic cod (Gadus morhua) using aqueous solutions of various eutectic solvents was studied, and after selection of the best solvent, an aqueous solution of urea (U) and lactic acid (LA) at a molar ratio of 1 : 2 (U : LA 1 : 2), the collagen extracted was properly characterized using SDS-PAGE, CD, FTIR, and XRD, and shown to be of type I. The results obtained here demonstrate an improvement in the yield and quality of the extracted collagen when eutectic mixtures were applied instead of acetic acid. After optimization of the process conditions, a maximum extraction yield of 6% was obtained for the aqueous solution of U : LA 1 : 2 at 0.75 M. The present work demonstrates the potential use of codfish skin waste and an aqueous solution of a DES to develop a more environmentally-friendly process to obtain high-quality collagen type I. It is an effort to convince industries to valorize their own residues under the guidelines of a circular economy. [ABSTRACT FROM AUTHOR]

Natural bioactive compounds have been attracting growing interest from the industries as a "greener" alternative to synthetic raw materials/products. Rhodotorula glutinis yeast naturally synthesizes added value compounds such as lipids and carotenoids, commonly used for cosmetic, pharmaceutical, and food applications. R. glutinis constitutes a rigid cell-wall structure, requiring energy-saving and efficient cell disruption methods for a sustainable recovery of the intracellular compounds. A simple and ecofriendly technology using mixed bio-based solvents (biosolvents) was evaluated here as an alternative platform to permeabilize yeast cells and to improve the selective recovery of β-carotene, torularhodin, torulene and lipids. The extraction ability of pure and solvent mixtures (methanol, ethanol, ethyl acetate, isopropanol, cyclohexane and 2-methyl tetrahydrofuran) was initially screened, demonstrating the clear impact of using mixtures to improve the extraction yields (up to three-fold increase). After identifying ethyl acetate/ethanol/water as the solvent mixture with a greater capacity to extract carotenoids and lipids, the selective recovery of carotenoids and lipids was enhanced by optimizing the solvent mixture composition ratio. Envisioning the industrial application, an integrated biosolvent-based downstream platform was designed. Two different strategies were investigated to further isolate carotenoids and lipids from R. glutinis biomass and to recycle the ethyl acetate/ethanol/water mixture: (i) precipitation using cold acetone; (ii) sequential liquid–liquid extraction. The integrated process for each strategy was compared with a conventional extraction procedure in terms of recovery efficiencies and its environmental impact. Regardless of the strategy, it is shown that the mixture of ethyl acetate, ethanol and water (15/27/58% w/w) can be reused up to three consecutive extractive cycles, ensuring high extraction efficiency yields, while decreasing the process carbon footprint by about 75% compared to the conventional method. [ABSTRACT FROM AUTHOR]

Herein, the effective use of aqueous biphasic systems (ABS) in Fast Centrifugal Partition Chromatography (FCPC) for the purification of PEGylated cytochrome c conjugates is shown. High recoveries (between 88% and 100%) and purities (∼100%) were obtained. Both the unreacted cytochrome c and solvents may be recovered and reused, thus allowing the design of a sustainable process in a continuous regime for the isolation of bioconjugates. This process allowed the reduction of the complete E-factor and carbon footprint at circa 100% and 67%, respectively, reinforcing the important environmental contribution of recycling units. [ABSTRACT FROM AUTHOR]

R-phycoerythrin is a high added-value protein found in red macroalgae with several interesting properties. Despite the promising results found when R-phycoerythrin is used as an optically active center in luminescent solar concentrators (LSCs), it still has some problems that can be attributed to the low stability of the R-phycoerythrin in the presence of the specific contaminant proteins found in the crude extract. The development of downstream strategies able to reduce the use of environmentally hazardous solvents, while improving the purification without compromising the R-phycoerythrin structural integrity is still the biggest challenge to overcome. Aqueous micellar two-phase systems (AMTPS) appear as an appealing fractionation approach since they allow the processing of systems with larger water contents, while displaying great selectivity and biocompatibility with several biomolecules. Moroever, AMTPS that mix surfactants and surface-active ionic liquids are shown to significantly enhance protein purification. In this work, mixed AMTPS were applied to the R-phycoerythrin purification from red macroalgae. After the process optimization, this work proposes the application of two consecutive steps of purification as the final process to isolate R-phycoerythrin from the remaining proteins composing the crude extract, while maintaining the structural integrity of R-phycoerythrin, as requested to be used in the LSC. Besides a good performance, the two-step approach developed was also shown to have a lower environmental impact with a carbon footprint decrease of 16%, when compared with the conventional AMTPS. [ABSTRACT FROM AUTHOR]

Nowadays, one of the biggest challenges for society is the development of appropriate technologies to process the waste residue produced worldwide. In the food sector, the generated waste is estimated to be nearly billions of tons annually. Brazil is one of the most representative examples of the economic and industrial potential of underexplored residues and raw materials. The palm heart, scientifically known as Bactris gasipaes, mainly its fruits, is one of the many examples found in Brazilian flora. The fruits have significant amounts of carotenoids, namely, the all-trans-β-carotene, all-trans-lycopene and the rare all-trans-γ-carotene, which are considered as excellent raw materials of commercial interest. However, the main challenge that remains is their efficient recovery. This work proposes the development of a performant process of extraction mediated by the use of ionic liquid (IL)-based ethanolic solutions. Four ILs were examined, as well as the solid–liquid ratio R(S/L), number of extractions, the time of extraction, the co-solvent-ratio R(IL/E) and the homogenization method employed. After selecting the best solvent ([C4mim][BF4]) and process conditions (extraction yield of 172 ± 18 μgcarotenoids gdried biomass−1), the IL-ethanolic solution recyclability was tested by freezing/precipitating the IL (maximum of 94% of IL recovered), proving its success for at least 10 cycles while decreasing the process carbon footprint by 50% compared with the conventional method using acetone. [ABSTRACT FROM AUTHOR]

Phenolic compounds are ubiquitous biomolecules exhibiting a wide range of physiological properties, with application in the pharmaceutical and nutraceutical fields. In this work, aqueous biphasic systems (ABS) formed by polyethylene glycol and sodium polyacrylate, and inorganic salts or ionic liquids as electrolytes, were applied for the purification of caffeic, ferulic and protocatechuic acids (CA, FA, and PA, respectively), vanillin (VN) and syringaldehyde (SA), followed by the use of centrifugal partition chromatography (CPC) to reinforce the fractionation process scale-up. In single-step experiments in ABS, high selectivities and adequate partition coefficients (KCA = 2.78 ± 0.20; KPA = 0.44 ± 0.04; KFA = 0.23 ± 0.01; KVN = 1.12 ± 0.05 and KSA = 1.23 ± 0.02) were achieved using ABS formed by sodium chloride as the electrolyte. This system was further applied in CPC, allowing an efficient separation of the five phenolic compounds after the optimization of the equipment operational conditions, while demonstrating the potential of polymer-based ABS to be used in liquid–liquid chromatography. Finally, the recovery of the phenolic compounds (between 65 and 87%) with high purity from the ABS phases was demonstrated, allowing the reuse of the ABS phase-forming components, which was proved to be of low environmental impact. In fact, in a scenario where the polymeric phases are reused, the carbon footprint is decreased to 36%, as the consumption of new chemicals and water reduces considerably. [ABSTRACT FROM AUTHOR]