Search

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

In this paper, we present a practical method to construct dirty paper coding (DPC) schemes using sum codes. Unlike the commonly used approach to DPC where the coding scheme involves concatenation of a channel code and a quantization code, the proposed method embodies a unified approach that emulates the binning method used in the proof of the DPC result. Auxiliary bits are used to create the desired number of code vectors in each bin. Sum codes are obtained when information sequences augmented with auxiliary bits are encoded using linear block codes. Sum-code-based DPC schemes can be implemented using any linear block code, and entail a relatively small increase in decoder complexity when compared to standard communication schemes. They can also lead to significant reduction in transmit power in comparison to standard schemes. [ABSTRACT FROM AUTHOR]

We propose a robust close-to-capacity dirty-paper coding (DPC) design framework in which multi-level low density parity check (LDPC) codes and trellis coded quantization (TCQ) are employed as the channel and source coding components, respectively. The proposed design framework is robust in the sense that it yields close to capacity solutions in the high-, medium-, and low-rate regimes. This is in contrast to existing practical DPC schemes that perform well only in one or two of these regimes, but not all three. We design codes for transmission rates of 0.5, 1.0, 1.5, and 2.0 bits/sample (b/s) using one, two, three, and four LDPC levels; at a block length of 2x 10^5, the codes perform 0.95, 0.58, 0.55, and 0.54 dB from the corresponding information theoretic limits, respectively. We also propose a low-complexity decoding scheme that does not involve iterative message passing between the source and channel decoders; the low-complexity scheme performs only 1.08, 0.85, and 0.79 dB away from the theoretical limits at transmission rates of 1.0, 1.5, and 2.0 b/s, respectively. [ABSTRACT FROM AUTHOR]

We consider precoder design for maximizing the weighted sum rate (WSR) of successive zero-forcing dirty paper coding (SZF-DPC). For this problem, the existing precoder designs often assume a sum power constraint (SPC) and rely on the singular value decomposition (SVD). The SVD-based designs are known to be optimal but require high complexity. We first propose a low-complexity optimal precoder design for SZF-DPC under SPC, using the QR decomposition. Then, we propose an efficient numerical algorithm to find the optimal precoders subject to per-antenna power constraints (PAPCs). To this end, the precoder design for PAPCs is formulated as an optimization problem with a rank constraint on the covariance matrices. A well-known approach to solve this problem is to relax the rank constraints and solve the relaxed problem. Interestingly, for SZF-DPC, we are able to prove that the rank relaxation is tight. Consequently, the optimal precoder design for PAPCs is computed by solving the relaxed problem, for which we propose a customized interior-point method that exhibits a superlinear convergence rate. Two suboptimal precoder designs are also presented and compared to the optimal ones. We also show that the proposed numerical method is applicable for finding the optimal precoders for block diagonalization scheme. [ABSTRACT FROM PUBLISHER]

This letter presents two results for multiuser wireless systems employing dirty-paper coding strategies along with greedy scheduling over the broadcast multiple-input multiple-output channel. Specifically, an efficient and suboptimal downlink scheduler is proposed to approximate the maximum sum rate using equal power allocation, and it is shown to approach the maximum sum rate of optimal power allocation for a large number of users under optimal scheduling. The second result demonstrates that the average maximum sum rate can be tightly upper bounded when spatial multiplexing is maximized. [ABSTRACT FROM AUTHOR]

In this paper, an efficient greedy scheduler for zero-forcing dirty-paper coding (ZF-DPC), which can be incorporated in complex Householder QR factorization of the channel matrix, is proposed. The ratio of the complexity of the proposed scheduler to the complexity of the channel matrix factorization required by ZF-DPC is O(M-1), while such ratio for the original greedy scheduler is O(M), where M is the number of transmitters. Therefore, the new scheduler reduces the overhead of scheduling from being the bottleneck of ZF-DPC to being negligible. [ABSTRACT FROM AUTHOR]

A dirty-paper channel is considered, where the transmitter knows the interference sequence up to a constant multiplicative factor, known only to the receiver. Lower bounds on the achievable rate of communication are derived by proposing a coding scheme that partially compensates for the imprecise channel knowledge. We focus on a communication scenario where the signal-to-noise ratio is high. Our approach is based on analyzing the performance achievable using lattice-based coding schemes. When the power of the interference is finite, we show that the achievable rate of this lattice-based coding scheme may be improved by a judicious choice of the scaling parameter at the receiver. We further show that the communication rate may be improved, for finite as well as infinite interference power, by allowing randomized scaling at the transmitter. [ABSTRACT FROM AUTHOR]

Radio Frequency IDentification (RFID) is intended to supplant legacy (optical) bar code scanning technology found in many logistic and retail applications. RFID is distinguished by inexpensive, low power and compact form factor tags, whose longevity and efficacy are predicated on using passive communication techniques and on-tag power harvesting. Such tags employ backscatter modulation, which does not require any active RF components. As a result, backscatter has become an attractive design choice for short-range communications in power constrained wireless sensor networking scenarios. The purpose of this work is two-fold. First, it aims to expose backscatter communication as an emerging topic to a communication systems-theoretic audience. Since backscatter modulation and on-tag power harvesting efficiency are coupled, it is necessary to re-examine notions of power and spectral efficiency from an energy-constraint perspective; this leads to novel coded modulation schemes for future RFID systems. Further, we investigate RFID MIMO systems where the channel fading encountered has different statistics than the classical Rayleigh fading model. In turn,the trade off between diversity order and spatial multiplexing gains are distinct from wide-area MIMO. [ABSTRACT FROM PUBLISHER]

The paper proposed a novel intelligent transmission surface (ITS) aided transmitter in an intelligent reflection surface (IRS) assisted multiuser multiple-input multiple-output (MIMO) network. The ITS deployed in the transmitter architecture can reduce the power consumption in signal beamforming at the base station (BS), and the IRS can help the information transfer from the ITS-aided transmitter to the users. We first maximize the weighted sum rate (WSR) of the users by jointly designing the beamforming vector at the BS and the phase shifts of ITS and IRS. To solve this non-convex optimization problem, we propose an effective algorithm in which the Lagrangian dual transform, the alternative optimization (AO) algorithm and the quadratic transform (QT) method are adopted to simplify the objective function. Then, the bisection search and the alternating direction method of multipliers (ADMM) algorithm are considered to design the optimal beamforming vector and phase shifts of ITS and IRS, respectively. Furthermore, the paper explores the energy efficiency (EE) maximization problem to emphasize the value of the ITS-assisted transmitter in terms of power savings. Finally, we compare the simulation results to various state-of-the-art techniques to see how much better the proposed algorithm is in terms of WSR and EE. [ABSTRACT FROM AUTHOR]

Cell-free millimeter-wave (mmWave) multiple-input multiple-output (MIMO) communications have been proposed as promising enablers for the next generation wireless networks. In this paper, we study the user association and hybrid beamforming in cell-free mmWave systems without full channel state information (CSI) acquisition. We consider a cloud radio access network (C-RAN), where multiple remote radio heads (RRHs) are distributed to communicate with users via analog beamforming, and connected to a centralized baseband unit (BBU) through fronthaul links which executes digital beamforming. We aim to jointly design user association, hybrid beamforming, and fronthaul compression with the aid of uplink training. A train-and-design framework is developed to achieve this goal. In particular, we first propose a two-stage uplink training approach to assist RRH-level design, during which the analog beamforming and user association are obtained. After that, digital beamforming and fronthaul compression are optimized at BBU based on the training results. Two performance metrics are considered in this paper, i.e. weighted sum-rate maximization and max-min fairness. Simulation results demonstrate the effectiveness of the proposed train-and-design framework for both sum-rate maximization and max-min fairness performance metrics. It is shown that the proposed algorithms can achieve comparable performance to the full-digital beamformer. [ABSTRACT FROM AUTHOR]

This paper concerns the problem of defending against spoofing attacks without a secret key. We address the problem using the Physical-Layer-Authentication (PLA) because of its high security, low overhead, and high compatibility. However, many PLA schemes have the following limitations: quantization errors, local optimums, and performance loss due to the change in the communication environment. In this paper, two phase-noise-based PLA schemes are proposed to address the limitations of the prior schemes. We denote the first scheme as the Multiple Phase Noises PLA (MPP) scheme, which realizes the PLA by using multiple phase noise innovations. Note that since the MPP scheme avoids using any quantization algorithm, it outperforms the prior schemes on the authentication performance. We denote the second scheme as the Enhanced Multiple Phase Noises PLA (EMPP) scheme, which introduces an artificial random phase to the transmitted symbols at the transmitter to further improve the authentication performance. The theoretical analyses of the proposed schemes over fading channels are provided, where the closed-form expressions are derived. Theoretical comparisons between the proposed schemes and prior schemes are provided. The theoretical analyses and simulation results demonstrated the superiority of the proposed schemes. In comparison with the prior schemes, the MPP scheme achieves 13% authentication-performance gain without demodulation-performance loss, while the EMPP scheme achieves 42% authentication-performance gain with merely 16% demodulation-performance loss. [ABSTRACT FROM AUTHOR]

This paper compares the accuracy and complexity of Raghavan and Baum’s Reliability Output Viterbi Algorithm (ROVA), Polyanskiy’s accumulated information density (AID), and Fricke and Hoeher’s lower complexity approximation of ROVA. It turns out that AID is far less accurate than ROVA in practice. This paper proposes codeword information density (CID), which modifies AID to improve its accuracy and leads to a lower-complexity implementation of ROVA. The paper includes an analytical expression for the random variable describing the correct decoding probability computed by ROVA and uses this expression to characterize how the probabilities of correct decoding, undetected error, and negative acknowledgement behave as a function of the selected threshold for reliable decoding. This paper examines both the complexity and the simulation time of ROVA, CID, AID, and the Fricke and Hoeher approximation to ROVA. This paper also derives an expression for the union bound on the frame error rate for zero-terminated trellis codes with punctured symbols and uses it to optimize the order of symbol transmission in an incremental retransmission scheme. This paper concludes by comparing the performance of an incremental retransmission scheme using ROVA as a stopping condition to one that uses a CRC as a stopping condition. [ABSTRACT FROM AUTHOR]

This paper investigates different precoding strategies for rate splitting multiple access (RSMA) in the downlink of multi-cell visible light communication (VLC) networks. Since classical Shannon capacity formula does not hold for VLC, we first provide a lower bound on the channel capacity for RSMA in such interfering networks. Then, we formulate a spectral efficiency maximization problem to jointly find the optimal rate-splitting and transmit precoding. Beside that, since cell-edge users suffer from additional inter-cell interference, we propose to design the precoders of different RSMA signals utilizing coordinated beamforming (CB). Subsequently, aiming to improve the performance of the CB design for RSMA, while maintain a reduced complexity, we introduce two enhanced precoding strategies for RSMA. To the best of the authors’ knowledge such a contribution has not been considered before in the open literature. It is shown in the paper that the formulated optimization problem is non-convex and a sub-optimal, yet, a low complexity solution can be obtained efficiently using semi-definite relaxation combined with successive convex approximation. Through analytical results, we illustrate the flexibility and superiority of the proposed precoding strategies for RSMA over conventional coordinated space division multiple access and non-orthogonal multiple access for different scenarios and network loads. [ABSTRACT FROM AUTHOR]

This paper studies the capacity of the two-user intensity-modulation/direct-detection (IM/DD) interference channel (IC), which is relevant in the context of multi-user optical wireless communications. Despite some known single-letter capacity characterizations for general discrete-memoryless ICs, a computable capacity expression for the IM/DD IC is missing. In this paper, we provide tight and easily computable inner and outer bounds for a general two-user IM/DD IC under peak and average optical intensity constraints. The bounds enable characterizing the asymptotic sum-rate capacity in the strong and weak interference regimes, as well as the generalized degrees of freedom (GDoF) in the symmetric case. Using the obtained bounds, the GDoF of the IM/DD IC is shown to have a ‘W’ shape similar to the Gaussian IC with power constraints. The obtained bounds are also evaluated numerically in different interference regimes to show their tightness, and used to study the performance of on-chip and indoor OWC systems. [ABSTRACT FROM AUTHOR]

This paper considers the uplink performance of a multi-user massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system with mobile users. Mobility brings two major problems to a MIMO-OFDM system: inter carrier interference (ICI) and channel aging. In practice, it is common to allot multiple contiguous subcarriers to a user as well as schedule multiple users on each subcarrier. Motivated by this, we consider a general subcarrier allocation scheme and derive expressions for the ICI power, uplink signal to interference plus noise ratio and the achievable uplink sum-rate, taking into account the ICI and the multi-user interference due to channel aging. We show that the system incurs a near-constant ICI power that depends linearly on the ratio of the number of users per subcarrier to the number of subcarriers per user, nearly independently of how the UEs distribute their power across the subcarriers. Further, we exploit the coherence bandwidth of the channel to reduce the length of the pilot sequences required for uplink channel estimation. We consider both zero-forcing and maximal-ratio combining at the receiver and compare the respective sum-rate performances. In either case, the subcarrier allocation scheme considered in this paper leads to significantly higher sum-rates compared to previous work, owing to the near-constant ICI property as well as the reduced pilot overhead. [ABSTRACT FROM AUTHOR]

Spatial modulation (SM) is one special type of multiple-input multiple-output (MIMO) technique whose advantage is that only one radio-frequency (RF) chain is needed. Recently, the so-called cross Z-complementary pair (CZCP) was proposed as the SM training sequence. Optimal channel estimation performance over frequency-selective channels can be achieved since the CZCPs have the specific zero correlation zone (ZCZ) for auto-correlation and cross-correlation sums. However, the ZCZ width of the CZCP is theoretically upper bounded by half sequence length. In this paper, the CZCP is extended to the cross Z-complementary set (CZCS) to have larger ZCZ width which can be used in SM to combat larger delay spread. Several generic constructions of CZCSs with large ZCZ widths and flexible lengths are proposed in this paper. Even the perfect CZCS, whose ZCZ width has the maximum value, can be obtained. Numerical simulations demonstrate that the proposed CZCS-based training sequence can tolerate large delay spreads to improve the channel estimation performance in SM. [ABSTRACT FROM AUTHOR]

Vehicle-to-vehicle (V2V) wireless communication systems are fundamental in many intelligent transportation applications, e.g., traffic load control, driverless vehicle, and collision avoidance. Hence, developing appropriate V2V communication systems and standardization require realistic V2V propagation channel models. However, most existing V2V channel modeling studies focus on car-to-car channels; only a few investigate truck-to-car (T2C) or truck-to-truck (T2T) channels. In this paper, a hybrid geometry-based stochastic model (GBSM) is proposed for T2X (T2C or T2T) channels in freeway environments. Next, we parameterize this GBSM from the extensive channel measurements. We extract the multipath components (MPCs) by using a joint maximum likelihood estimation (RiMAX) and then determine the cluster types based on their evolution patterns. We classify the determined clusters into line-of-sight, single-bounce reflections from static interaction objects (IOs), single-bounce reflections from mobile IOs, multiple-bounce reflections, and density multipath components (DMCs). Particularly, we model multiple-bounce reflections as double clusters following the COST 273/COST2100 method. This paper presents the complete parameterization of the channel model. We validate this model by comparing the delay spread and the angular spreads of arrival/departure obtained from the proposed model with the measurement data. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted wireless communication system and present two joint channel estimation and signal recovery schemes based on message passing algorithms in this paper. Specifically, the proposed bidirectional scheme applies the Taylor series expansion and Gaussian approximation to simplify the sum-product procedure in the formulated problem. In addition, the inner iteration that adopts two variants of approximate message passing algorithms is incorporated to ensure robustness and convergence. Two ambiguities removal methods are also discussed in this paper. Our simulation results show that the proposed schemes show the superiority over the state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed schemes. [ABSTRACT FROM AUTHOR]

Terahertz (THz) band communications are envisioned as a key technology for 6G and Beyond. As a fundamental wireless infrastructure, THz communication can boost abundant promising applications. In 2014, our team published two comprehensive roadmaps for the development and progress of THz communication networks, which helped the research community to start research on this subject afterwards. The topic of THz communications became very important and appealing to the research community due to 6G wireless systems design and development in recent years. Many papers are getting published covering different aspects of wireless systems using the THz band. With this paper, our aim is looking back to the last decade and revisiting the old problems and pointing out what has been achieved in the research community so far. Furthermore, in this paper, open challenges and new research directions still to be investigated for the THz band communication systems are presented, by covering diverse topics ranging from devices, channel behavior, communication and networking, to physical testbeds and demonstration systems. The key aspects presented in this paper will enable THz communications as a pillar of 6G and Beyond wireless systems in the next decade. [ABSTRACT FROM AUTHOR]

This paper investigates intelligent reflecting surface based backscatter communication (IRS-BackCom), in order to realize computational task offloading of energy-constrained mobile edge computing network in a self-sustainable manner. Specifically, the system operation is divided into two phases. In the first one, the ambient signal energy from a power beacon (PB) either provides the energy supply of local computing and energy harvesting circuits, or flows into the energy storage, when reaching the IRS. In the second one, the stored energy is used to enable IRS-BackCom for partial computational data offloading and energize local computing circuit. Based on this, the maximization problem of sum computational bits is formulated. By jointly optimizing the beamforming vector at the PB, the backscatter matrix at the IRS, the time scheduling of two-phase process, as well as the time of local computing, sum computational bits are maximized. In addition, this paper proposes element clustering to realize BackCom, so as to reduce the control and computation complexity of IRS. According to different operating mechanisms, two cluster operation modes are considered, namely independent cluster operation mode and joint cluster operation mode. Simulation results demonstrate the achievable sum computational bits by the proposed IRS-BackCom schemes. [ABSTRACT FROM AUTHOR]

Maximizing the information per the expected unit energy cost in biological neurons is vital in understanding the functionality of our nervous system and improving the bio-inspired nano-networks. Hence, toward a better comprehension of neuronal information processing and communication from an information-energy standpoint, this paper presents the following novel results on the capacity-achieving distribution: 1) For the first time, the paper presents the probability mass function of the number of spikes observed in a given time window where inter-spike intervals follow the Inverse Gaussian distribution. To extend this result, the first and second moments of the underlying probability mass function will be determined. 2) The paper proves that the relationship between the underlying probability mass function and the marginal distribution of the intensity parameter is one-to-one when the parameter is a random variable. 3) Proof that a unique capacity-achieving distribution for the stimulus intensity exists in a discrete form with a finite number of mass points that varies with the energy budget. Then, the paper presents an algorithm that numerically computes a trade-off between the maximum transmit bits and the coding-duration energy expenditure. Subsequently, the optimal multiplier along with the optimal distribution and the corresponding capacity will be obtained. [ABSTRACT FROM AUTHOR]

In this paper, the design of a multiple-input multiple-output (MIMO) optical wireless communication (OWC) link based on vertical cavity surface emitting laser (VCSEL) arrays is systematically carried out with the aim to support data rates in excess of 1 Tb/s for the backhaul of sixth generation (6G) indoor wireless networks. The proposed design combines direct current optical orthogonal frequency division multiplexing (DCO-OFDM) and a spatial multiplexing MIMO architecture. For such an ultra-high-speed line-of-sight (LOS) OWC link with low divergence laser beams, maintaining alignment is of high importance. In this paper, two types of misalignment error between the transmitter and receiver are distinguished, namely, radial displacement error and orientation angle error, and they are thoroughly modeled in a unified analytical framework assuming Gaussian laser beams, resulting in a generalized misalignment model (GMM). The derived GMM is then extended to MIMO arrays and the performance of the MIMO-OFDM OWC system is analyzed in terms of the aggregate data rate. Novel insights are provided into the system performance based on computer simulations by studying various influential factors such as beam waist, array configuration and different misalignment errors, which can be used as guidelines for designing short range Tb/s MIMO OWC systems. [ABSTRACT FROM AUTHOR]

This paper proposes a new probabilistic amplitude shaping (PAS) approach for concatenated two-level multi-level coding (MLC). The proposed system is based on a concatenated forward error correction (FEC) scheme where outer codes are serially concatenated with inner two-level MLC. This concatenated two-level MLC scheme has recently been shown to have a potential for achieving better performance-complexity trade-offs than the conventional bit-interleaved coded modulation (BICM). Meanwhile, PAS has recently been demonstrated to offer remarkable performance gains as well as rate adaptivity. However, the majority of existing works on PAS assume the use of the binary reflected Gray code as a bit-labeling, and its application to coded modulation schemes with other bit-labelings, such as two-level MLC, may not be straightforward. In this paper, we devise a bit-labeling scheme and propose a new PAS structure for an efficient integration of PAS with two-level MLC systems. More specifically, we propose to generate signed amplitude symbols with the distribution matcher (DM) for maximizing both coding and shaping gains achieved by two-level MLC and PAS, respectively, while the conventional PAS generates unsigned amplitude symbols. It is demonstrated by simulation results that, with 256QAM and inner polar codes, the proposed two-level MLC with PAS simultaneously offers 75% reduction in the number of required inner encoding and soft-decision (SD) decoding operations for given outer and inner FEC code lengths, and up to 0.3 dB performance gain over the conventional PAS scheme. [ABSTRACT FROM AUTHOR]

This paper introduces a novel approach of utilizing the reconfigurable intelligent surface (RIS) for joint data modulation and signal beamforming in a multi-user downlink cellular network by leveraging the idea of backscatter communication. We present a general framework in which the RIS, referred to as modulating intelligent surface (MIS) in this paper, is used to: $i$) beamform the signals for a set of users whose data modulation is already performed by the base station (BS), and at the same time, $ii$) embed the data of a different set of users by passively modulating the deliberately sent carrier signals from the BS to the RIS. To maximize each user’s spectral efficiency, a joint non-convex optimization problem is formulated under the sum minimum mean-square error (MMSE) criterion. Alternating optimization is used to divide the original joint problem into two tasks of: $i$) separately optimizing the MIS phase-shifts for passive beamforming along with data embedding for the BS- and MIS-served users, respectively, and $ii$) jointly optimizing the active precoder and the receive scaling factor for the BS- and MIS-served users, respectively. While the solution to the latter joint problem is found in closed-form using traditional optimization techniques, the optimal phase-shifts at the MIS are obtained by deriving the appropriate optimization-oriented vector approximate message passing (OOVAMP) algorithm. Moreover, the original joint problem is solved under both ideal and practical constraints on the MIS phase shifts, namely, the unimodular constraint and assuming each MIS element to be terminated by a variable reactive load. The proposed MIS-assisted scheme is compared against state-of-the-art RIS-assisted wireless communication schemes and simulation results reveal that it brings substantial improvements in terms of system throughput while supporting a much higher number of users. [ABSTRACT FROM AUTHOR]

This paper investigates the optimal signal detection problem with a particular interest in large-scale multiple-input multiple-output (MIMO) systems. The problem is NP-hard and can be solved optimally by searching the shortest path on the decision tree. Unfortunately, the existing optimal search algorithms often involve prohibitively high complexities, which indicates that they are infeasible in large-scale MIMO systems. To address this issue, we propose a general heuristic search algorithm, namely, hyper-accelerated tree search (HATS) algorithm. The proposed algorithm employs a deep neural network (DNN) to estimate the optimal heuristic, and then use the estimated heuristic to speed up the underlying memory-bounded search algorithm. This idea is inspired by the fact that the underlying heuristic search algorithm reaches the optimal efficiency with the optimal heuristic function. Simulation results show that the proposed algorithm reaches almost the optimal bit error rate (BER) performance in large-scale systems, while the memory size can be bounded. In the meanwhile, it visits nearly the fewest tree nodes. This indicates that the proposed algorithm reaches almost the optimal efficiency in practical scenarios, and thereby it is applicable for large-scale systems. Besides, the code for this paper is available at https://github.com/skypitcher/hats. [ABSTRACT FROM AUTHOR]

In this paper, we consider the problem of joint beam selection and link activation across a set of communication pairs to effectively control the interference between communication pairs via inactivating part communication pairs in ultra-dense device-to-device (D2D) mmWave communication networks. The resulting optimization problem is formulated as an integer programming problem that is nonconvex and NP-hard. Consequently, the global optimal solution, even the local optimal solution, cannot be generally obtained. To overcome this challenge, this paper resorts to design a deep learning architecture based on graph neural network to finish the joint beam selection and link activation, with taking the network topology information into account. Meanwhile, we present an unsupervised Lagrangian dual learning framework to train the parameters of the GBLinks model. Numerical results show that the proposed GBLinks model can converge to a stable point with the number of iterations increases, in terms of the weighted sum rate. Furthermore, the GBLinks model can reach near-optimal solutions through comparing with the exhaustive scheme in small-scale ultra-dense D2D mmWave communication networks and outperforms GreedyNoSched and the SCA-based method. It also shows that the GBLinks model can generalize to varying network densities and network coverage regions of ultra-dense D2D mmWave communication networks. [ABSTRACT FROM AUTHOR]

In this paper, we propose an optimization method for protograph-based spatially coupled low-density parity-check (SC-LDPC) codes under window decoding (WD). Previous works on constructing SC-LDPC codes for WD typically focused on optimizing asymptotic performance metrics such as the WD threshold. However, in this paper, it is observed that the WD threshold is not an appropriate metric to sufficiently explain the finite-length behavior of SC-LDPC codes under WD. Thus, we propose a new performance metric, called the window mean parameter, based on a scaling analysis to capture the WD performance more accurately and formulate a code optimization algorithm that optimizes the proposed performance metric. Since the proposed metric depends on the window size, the optimization algorithm can provide a code family of SC-LDPC codes optimized for various target window sizes. Simulation results confirm that the improvement in the proposed metric leads to a finite-length performance improvement, resulting in one to two orders of the frame error rate gain over the conventional SC-LDPC codes for a wide range of window sizes. Furthermore, we investigate structural characteristics of the proposed codes to provide a supplementary explanation for the performance improvement, which also promotes a better understanding of SC-LDPC codes for WD. [ABSTRACT FROM AUTHOR]

A hybrid communication network with a common analog source signal and independent digital data streams at the transmitters of a multiple access network is considered. The receiver has to estimate the analog signal samples with a given fidelity, and decode the digital streams with a low error probability. The main goal of this paper is to characterize the optimal tradeoff between the mean-squared error distortion in source estimation and the data rates available to each user. To this end, we consider a Gaussian multiple access channel (GMAC) setup with additive state, where the state is nothing but a scaled version of the source process itself. The state process is assumed to be non-causally available to all the transmitting nodes. The problem now becomes that of the joint state estimation and message communication in a GMAC with state. We provide a complete characterization of the optimal distortion-rate tradeoff for an $N$ —sender GMAC. Our results show that, similar to the single-user results, it is optimal to amplify the state using uncoded transmissions, whereas the digital streams are superposed using appropriate Gaussian codebooks in conjunction with dirty paper coding (DPC). Since the variance of the additive state is controlled by a scaling factor in our model, we also recover the results for communicating a common source and independent messages over a GMAC without state as a special case. [ABSTRACT FROM AUTHOR]

This paper uses the reconstruction-computation-quantization (RCQ)paradigm to decode low-density parity-check (LDPC) codes. RCQ facilitates dynamic non-uniform quantization to achieve good frame error rate (FER) performance with very low message precision. For message-passing according to a flooding schedule, the RCQ parameters are designed by discrete density evolution. Simulation results on an IEEE 802.11 LDPC code show that for 4-bit messages, a flooding Min Sum RCQ decoder outperforms table-lookup approaches such as information bottleneck (IB) or Min-IB decoding, with significantly fewer parameters to be stored. Additionally, this paper introduces layer-specific RCQ, an extension of RCQ decoding for layered architectures. Layer-specific RCQ uses layer-specific message representations to achieve the best possible FER performance. For layer-specific RCQ, this paper proposes using layered discrete density evolution featuring hierarchical dynamic quantization (HDQ) to design parameters efficiently. Finally, this paper studies field-programmable gate array (FPGA) implementations of RCQ decoders. Simulation results for a (9472, 8192) quasi-cyclic (QC) LDPC code show that a layered Min Sum RCQ decoder with 3-bit messages achieves more than a 10% reduction in LUTs and routed nets and more than a 6% decrease in register usage while maintaining comparable decoding performance, compared to a 5-bit offset Min Sum decoder. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the outage performance of an uplink (UL) non-orthogonal multiple access (NOMA)-based hybrid satellite-terrestrial relay network (HSTRN), in which two users communicate with the satellite through a decode-and-forward (DF) relay due to the lack of direct link. To provide a comprehensive yet hitherto unexplored outage analysis framework, we consider a more generalized channel model, i.e., the terrestrial and satellite links, respectively, undergo $\alpha -\mu $ and $\kappa -\mu $ shadowed fadings. Under fixed power allocation (FPA) for both multiple access phase and relaying phase, we firstly study three successive interference cancellation (SIC) decoding schemes, of which the first two are refined from existing schemes, while the third one, named as extended SIC (ESIC), is proposed in this paper to satisfy the quality of service (QoS) decoding criterion, which is shown to offer better performances for both users as compared to the former two SIC schemes. We also propose a novel dynamic power allocation (DPA) scheme for the multiple access phase, termed as enhanced DPA (EDPA), to overcome both users’ error floor (EF) issue yet provide better user fairness than the conventional DPA in the literature. We then analyze the exact and asymptotic outage performance for three SIC and the EDPA schemes under the generalized channel setting. It is shown that both the proposed ESIC and EDPA can circumvent the EF issue and moreover, each has its own advantage in terms of the diversity order (DO). Our results also reveal that there exists a trade-off between ESIC and EDPA, since the former requires a premise on users’ targets rates to overcome the EF and once this premise is satisfied, no DO degradation will occur, while the latter does not entail such a premise but may face potential DO degradation. Finally, we present numerical results to verify the theoretical analysis, manifest the impacts of key parameters on the system performance, and demonstrate the advantages of our proposed network over other benchmarks. [ABSTRACT FROM AUTHOR]

This paper studies the precoder design problem of achieving max-min fairness (MMF) amongst users in multigateway multibeam satellite communication systems with feeder link interference. We propose a beamforming strategy based on a newly introduced transmission scheme known as rate-splitting multiple access (RSMA). RSMA relies on multi-antenna rate-splitting at the transmitter and successive interference cancellation (SIC) at the receivers, such that the intended message for a user is split into a common part and a private part and the interference is partially decoded and partially treated as noise. In this paper, we formulate the MMF problem subject to per-antenna power constraints at the satellite for the system with imperfect channel state information at the transmitter (CSIT). We also consider the case of two-stage precoding which is assisted by on- board processing (OBP) at the satellite. Numerical results obtained through simulations for RSMA and the conventional linear precoding method are compared. When RSMA is used, MMF rate gain is promised and this gain increases when OBP is used. RSMA is proven to be promising for multigateway multibeam satellite systems whereby there are various practical challenges such as feeder link interference, CSIT uncertainty, per-antenna power constraints, uneven user distribution per beam and frame-based processing. [ABSTRACT FROM AUTHOR]

Conventional design methods of polar-coded modulation schemes aim to minimize the block error rate (BLER) under successive cancellation (SC) decoding. However, codes designed by conventional methods are not competitive under successive cancellation list (SCL) decoding. This paper presents a new design method based on the BLER upper bound under maximum-likelihood (ML) decoding (ML-BLER upper bound). The ML-BLER upper bound depends on the weight enumerating function (WEF) of the polar-coded modulation scheme over the squared Euclidean distance. In this paper, the polar-coded modulation is randomized by the concept of interleaved polar (i-polar) codes, and the WEF averaged over the ensemble of the polar-coded modulation schemes can be derived. Three polar-coded modulation schemes are considered, i.e., the bit-interleaved polar-coded modulation with a single interleaver (BIPCM-SI), the bit-interleaved polar-coded modulation with multiple interleavers (BIPCM-MI), and the multi-level polar-coded modulation (MLPCM). A new bit channel selection algorithm for polar-coded modulation schemes is proposed, which takes the polarization effect and the ML-BLER upper bound as design criteria. Design examples show that, under SCL decoding, the polar-coded modulation schemes (without CRC) with the proposed channel selection algorithm outperform those with conventional algorithms and are competitive as compared to the state-of-the-art 5G LDPC codes. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) technology is promising to enhance wireless communications services by providing smart radio environment. In this paper, we investigate the RIS aided cellular networks with device-to-device (D2D) users, and maximize the sum of the transmission rate of the D2D communications and the cellular networks from a new perspective. In addition to solving the typical resource allocation problems for D2D communications, this paper further optimize the wireless environment by adjusting the position and phase shift of the RIS. To solve this non-convex problem, we propose a novel decentralized double deep Q-network (D3QN) framework for the resource allocation at users and a centralized DDQN for RIS optimization at the base station (BS), which are verified to achieve the near-optimal performance with lower complexity and enhanced robustness. Simulation results illustrate that the proposed framework can achieve higher transmission rates compared to benchmarks, meanwhile meeting the quality of service (QoS) requirements at the BS and D2D users. [ABSTRACT FROM AUTHOR]

The reconfigurable intelligent surface (RIS), which consists of many low-cost reflecting elements, can enhance the reception of the desired signal and suppress the interference. Considering the above advantages, this paper investigates the RIS-assisted wireless communication in the presence of an interferer, where a receiver receives the desired signal and interference from a transmitter and an interferer, respectively, and the RIS is deployed to assist this system. First, an interference-limited channel capacity maximization problem is formulated, and a numerical algorithm based on the fraction programming and optimality conditions is proposed to obtain the optimal solution. Then, this paper shows the upper boundary of the maximal capacity with interference and discusses what kind of channel conditions can achieve the upper boundary and the corresponding optimal phase shifts. Next, this paper analyzes the asymptotic behaviors of the maximal capacity in the scenarios that some or all of the number of reflecting elements, antennas at the transmitter, and interferer go to infinity. Finally, this paper generalizes the above results to the multiple interferers scenario. [ABSTRACT FROM AUTHOR]

Indoor optical wireless communication (IOWC) is a key technology complementing radio communication in 6G. Typically, the downlink of IOWC is implemented using visible light and uplink is implemented using infrared. Though the downlink of IOWC has been studied well, the uplink of multiple-access IOWC requires further research. In this paper, power allocation strategies in the uplink of IOWC with multiple non-cooperative users is studied. Optimizing power allocation in IOWC that maximize sum-rate with power constraints becomes a non-convex problem. First, this paper proposes an alternating maximization algorithm to compute near optimal power allocation policies for small number of users. Next, a phenomenon of invariance is observed when the number of users in the system is large. Under invariance, the optimal power allocation policy of a user becomes independent of other users, thereby facilitating fast and decentralized computation of power allocation strategies. From simulations, it was observed that the invariance can occur even with five to ten users. For the first time, a rigorous analysis of the invariance phenomenon is provided. An algorithm to compute the optimal power allocation at invariance is proposed; this algorithm is proven to achieve the global maxima in sum-rate without the channel knowledge of other users. [ABSTRACT FROM AUTHOR]

This paper studies a multiple-input–single-output (MISO) broadcast channel (BC) featuring simultaneous wireless information and power transfer, where a multiantenna access point (AP) delivers both information and energy via radio signals to multiple single-antenna receivers simultaneously, and each receiver implements either information decoding (ID) or energy harvesting (EH). In particular, pseudorandom sequences that are a priori known and therefore can be cancelled at each ID receiver are used as the energy signals, and the information-theoretically optimal dirty paper coding is employed for the information transmission. We characterize the capacity region for ID receivers by solving a sequence of weighted sum-rate (WSR) maximization (WSRMax) problems subject to a maximum sum-power constraint for the AP, and a set of minimum harvested power constraints for individual EH receivers. The problem corresponds to a new form of WSRMax problem in MISO-BC with combined maximum and minimum linear transmit covariance constraints (MaxLTCCs and MinLTCCs), which differs from the celebrated capacity region characterization problem for MISO-BC under a set of MaxLTCCs only and is challenging to solve. By extending the general BC–multiple-access-channel duality, which is only applicable to WSRMax problems with MaxLTCCs, and applying the ellipsoid method, we propose an efficient iterative algorithm to solve this problem globally optimally. Furthermore, we also propose two suboptimal algorithms with lower complexity by assuming that the information and energy signals are designed separately. Finally, numerical results are provided to validate our proposed algorithms. [ABSTRACT FROM PUBLISHER]

Different from conventional wired line connections, industrial control through wireless transmission is widely regarded as a promising solution due to its reduced cost, increased long-term reliability, and enhanced reliability. However, mission-critical applications impose stringent quality of service (QoS) requirements that entail ultra-reliability low-latency communications (URLLC). The primary feature of URLLC is that the blocklength of channel codes is short, and the conventional Shannon’s Capacity is not applicable. In this paper, we consider the URLLC in a factory automation (FA) scenario. Due to densely deployed equipment in FA, wireless signal are easily blocked by the obstacles. To address this issue, we propose to deploy intelligent reflecting surface (IRS) to create an alternative transmission link, which can enhance the transmission reliability. In this paper, we focus on the performance analysis for IRS-aided URLLC-enabled communications in a FA scenario. Both the average data rate (ADR) and the average decoding error probability (ADEP) are derived under finite channel blocklength for seven cases: 1) Rayleigh fading channel; 2) With direct channel link; 3) Nakagami-m fading channel; 4) Imperfect phase alignment; 5) Multiple-IRS case; 6) Rician fading channel; 7) Correlated channels. Extensive numerical results are provided to verify the accuracy of our derived results. [ABSTRACT FROM AUTHOR]

This paper studies the minimum-age scheduling problem in a wireless sensor network where an access point (AP) monitors the state of an object via a set of sensors. The freshness of the sensed state, measured by the age-of-information (AoI), varies at different sensors and is not directly observable to the AP. The AP has to decide which sensor to query/sample in order to get the most updated state information of the object (i.e., the state information with the minimum AoI). In this paper, we formulate the minimum-age scheduling problem as a multi-armed bandit problem with partially observable arms and explore the greedy policy to minimize the expected AoI sampled over an infinite horizon. To analyze the performance of the greedy policy, we 1) put forth a relaxed greedy policy that decouples the sampling processes of the arms, 2) formulate the sampling process of each arm as a partially observable Markov decision process (POMDP), and 3) derive the average sampled AoI under the relaxed greedy policy as a sum of the average AoI sampled from individual arms. Numerical and simulation results validate that the relaxed greedy policy is an excellent approximation to the greedy policy in terms of the expected AoI sampled over an infinite horizon. [ABSTRACT FROM AUTHOR]

Cell-free massive MIMO is one of the key technologies for future wireless communications, in which users are simultaneously and jointly served by all access points (APs). In this paper, we investigate the minimum mean square error (MMSE) estimation of effective channel coefficients in cell-free massive MIMO systems with massive connectivity. To facilitate the theoretical analysis, only single measurement vector (SMV) based MMSE estimation is considered in this paper, i.e., the MMSE estimation is performed based on the received pilot signals at each AP separately. Inspired by the decoupling principle of replica symmetric postulated MMSE estimation of sparse signal vectors with independent and identically distributed (i.i.d.) non-zero components, we develop the corresponding decoupling principle for the SMV based MMSE estimation of sparse signal vectors with independent and non-identically distributed (i.n.i.d.) non-zero components, which plays a key role in the theoretical analysis of SMV based MMSE estimation of the effective channel coefficients in cell-free massive MIMO systems with massive connectivity. Subsequently, based on the obtained decoupling principle of MMSE estimation, likelihood ratio test and the optimal fusion rule, we perform user activity detection based on the received pilot signals at only one AP, or cooperation among the entire set of APs for centralized or distributed detection. Via theoretical analysis, we show that the error probabilities of both centralized and distributed detection tend to zero when the number of APs tends to infinity while the asymptotic ratio between the number of users and pilots is kept constant. We also investigate the asymptotic behavior of oracle estimation in cell-free massive MIMO systems with massive connectivity via random matrix theory. Moreover, in order to demonstrate the potential performance loss of SMV based MMSE estimation, which does not employ the correlation between the received pilot signals at different APs, the multiple measurement vector (MMV) based MMSE estimation, i.e., joint MMSE estimation with pilot signals from all APs, is analyzed via numerical results. Numerical analysis shows that the theoretical analyze with our decoupling principle for the SMV based MMSE estimation of sparse signal vectors with i.n.i.d. non-zero components matches well with the numerical results. [ABSTRACT FROM AUTHOR]

Supporting parallel multi-priority data streams is vital for maintaining the quality of service (QoS) in vehicle-to-everything (V2X) communication. Hence, the European telecommunications standard institute (ETSI) has defined four packet types, with varying priority levels, to be used as broadcast packets in such communication. This paper studies the medium access control (MAC) layer performance of IEEE 802.11p and cellular-V2X (C-V2X) Mode 4 using discrete-time Markov chain (DTMC) based models, while considering parallel multi-priority data streams. The overall model consists of four queue models with their respective traffic generators, which are appropriately linked with the DTMCs modeling the MAC layer operations of IEEE 802.11p and C-V2X Mode 4. Closed-form solutions for the steady-state probabilities of the models are obtained, which are then utilized to derive expressions for key performance indicators at the MAC layer. Numerical results are provided to draw insights on the MAC layer performance of the two technologies. IEEE 802.11p is comparatively superior in average delay, and at maintaining fairness among multi-priority data streams, whereas C-V2X Mode 4 exhibits better collision resolution, which leads to its higher throughput. The paper also includes design insights on possible performance enhancements for future releases. [ABSTRACT FROM AUTHOR]

This paper presents the design and bit error rate (BER) analysis of a phase-independent non-orthogonal multiple access (NOMA) system. The proposed NOMA system can utilize amplitude-coherent detection (ACD) which requires only the channel amplitude for equalization purposes. In what follows, three different designs for realizing the detection of the proposed NOMA are investigated. One is based on the maximum likelihood (ML) principle, while the other two are based on successive interference cancellation (SIC). Closed-form expressions for the BER of all detectors are derived and compared with the BER of the coherent ML detector. The obtained results, which are corroborated by simulations, demonstrate that, in most scenarios, the BER is dominated by multiuser interference rather than the absence of the channel phase information. Consequently, the BER using ML and ACD are comparable for various cases of interest. The paper also shows that the SIC detector is just an alternative approach to realize the ML detector, and hence, both detectors provide the same BER performance. [ABSTRACT FROM AUTHOR]

The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototyping of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 controllable elements working at 5.8 GHz band. We propose an efficient algorithm for configuring the RIS over the air by exploiting the geometrical array properties and a practical receiver-RIS feedback link. In our indoor test, where the transmitter and receiver are separated by a 30 cm thick concrete wall, our RIS prototype provides a 26 dB power gain compared to the baseline case where the RIS is replaced by a copper plate. A 27 dB power gain was observed in the short-distance outdoor measurement. We also carried out long-distance measurements and successfully transmitted a 32 Mbps data stream over 500 m. A 1080p video was live-streamed and it only played smoothly when the RIS was utilized. The power consumption of the RIS is around 1 W. Our paper is vivid proof that the RIS is a very promising technology for future wireless communications. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS)-assisted communication appears as one of the potential enablers for sixth generation (6G) wireless networks by providing a new degree of freedom in the system design to telecom operators. Particularly, RIS-empowered millimeter wave (mmWave) communication systems can be a remedy to provide broadband and ubiquitous connectivity. This paper aims to fill an important gap in the open literature by providing a physical, accurate, open-source, and widely applicable RIS channel model for mmWave frequencies. Our model is not only applicable in various indoor and outdoor environments but also includes the physical characteristics of wireless propagation in the presence of RISs by considering 5G radio channel conditions. Various deployment scenarios are presented for RISs and useful insights are provided for system designers from the perspective of potential RIS use-cases and their efficient positioning. The scenarios in which the use of an RIS makes a big difference or might not have a big impact on the communication system performance, are revealed. The open-source and comprehensive SimRIS Channel Simulator is also introduced in this paper. [ABSTRACT FROM AUTHOR]

This paper proposes a novel scalable reinforcement learning approach for simultaneous routing and spectrum access in wireless ad-hoc networks. In most previous works on reinforcement learning for network optimization, the network topology is assumed to be fixed, and a different agent is trained for each transmission node—this limits scalability and generalizability. Further, routing and spectrum access are typically treated as separate tasks. Moreover, the optimization objective is usually a cumulative metric along the route, e.g., number of hops or delay. In this paper, we account for the physical-layer signal-to-interference-plus-noise ratio (SINR) in a wireless network and further show that bottleneck objective such as the minimum SINR along the route can also be optimized effectively using reinforcement learning. Specifically, we propose a scalable approach in which a single agent is associated with each flow and makes routing and spectrum access decisions as it moves along the frontier nodes. The agent is trained according to the physical-layer characteristics of the environment using a novel rewarding scheme based on the Monte Carlo estimation of the future bottleneck SINR. It learns to avoid interference by intelligently making joint routing and spectrum allocation decisions based on the geographical location information of the neighbouring nodes. [ABSTRACT FROM AUTHOR]

This paper studies the distributed linearly separable computation problem, which is a generalization of many existing distributed computing problems such as distributed gradient coding and distributed linear transform. A master asks ${\mathsf {N}}$ distributed workers to compute a linearly separable function of ${\mathsf {K}}$ datasets, which is a set of ${\mathsf {K}}_{\mathrm{ c}}$ linear combinations of ${\mathsf {K}}$ equal-length messages (each message is a function of one dataset). We assign some datasets to each worker in an uncoded manner, who then computes the corresponding messages and returns some function of these messages, such that from the answers of any ${\mathsf {N}}_{\mathrm{ r}}$ out of ${\mathsf {N}}$ workers the master can recover the task function with high probability. In the literature, the specific case where ${\mathsf {K}}_{\mathrm{ c}}=1$ or where the computation cost is minimum has been considered. In this paper, we focus on the general case (i.e., general ${\mathsf {K}}_{\mathrm{ c}} $ and general computation cost) and aim to find the minimum communication cost. We first propose a novel converse bound on the communication cost under the constraint of the popular cyclic assignment (widely considered in the literature), which assigns the datasets to the workers in a cyclic way. Motivated by the observation that existing strategies for distributed computing fall short of achieving the converse bound, we propose a novel distributed computing scheme for some system parameters. The proposed computing scheme is optimal for any assignment when ${\mathsf {K}}_{\mathrm{ c}}$ is large and is optimal under the cyclic assignment when the numbers of workers and datasets are equal or ${\mathsf {K}}_{\mathrm{ c}}$ is small. In addition, it is order optimal within a factor of 2 under the cyclic assignment for the remaining cases. [ABSTRACT FROM AUTHOR]

This paper is concerned with detecting an integer parameter vector inside a box from a linear model that is corrupted with a noise vector following the Gaussian distribution. One of the commonly used detectors is the maximum likelihood detector, which is obtained by solving a box-constrained integer least squares problem, that is NP-hard. Two other popular detectors are the box-constrained rounding and Babai detectors due to their high efficiency of implementation. In this paper, we first present formulas for the success probabilities (the probabilities of correct detection) of these three detectors for two different situations: the integer parameter vector is deterministic and is uniformly distributed over the constraint box. Then, we give two simple examples to respectively show that the success probability of the box-constrained rounding detector can be larger than that of the box-constrained Babai detector and the latter can be larger than the success probability of the maximum likelihood detector when the parameter vector is deterministic, and prove that the success probability of the box-constrained rounding detector is always not larger than that of the box-constrained Babai detector when the parameter vector is uniformly distributed over the constraint box. Some relations between the results for the box constrained and ordinary cases are presented, and two bounds on the success probability of the maximum likelihood detector, which can easily be computed, are developed. Finally, simulation results are provided to illustrate our main theoretical findings. [ABSTRACT FROM AUTHOR]

In this paper, we aim to improve the connectivity, scalability, and energy efficiency of machine-type communication (MTC) networks with different types of MTC devices (MTCDs), namely Type-I and Type-II MTCDs, which have different communication purposes. To this end, we propose two transmission schemes called connectivity-oriented machine-type communication (CoM) and quality-oriented machine-type communication (QoM), which take into account the stochastic geometry-based deployment and the random active/inactive status of MTCDs. Specifically, in the proposed schemes, the active Type-I MTCDs operate using a novel Bernoulli random process-based simultaneous wireless information and power transfer (SWIPT) architecture. Next, utilizing multi-user power-domain non-orthogonal multiple access (PD-NOMA), each active Type-I MTCD can simultaneously communicate with another Type-I MTCD and a scalable number of Type-II MTCDs. In the performance analysis of the proposed schemes, we prove that the true distribution of the received power at a Type-II MTCD in the QoM scheme can be approximated by the Singh-Maddala distribution. Exploiting this unique statistical finding, we derive approximate closed-form expressions for the outage probability (OP) and sum-throughput of massive MTC (mMTC) networks. Through numerical results, we show that the proposed schemes provide a considerable sum-throughput gain over conventional mMTC networks. [ABSTRACT FROM AUTHOR]

Millimeter-wave (mmWave) fifth-generation (5G) and beyond 5G localization enables the provisioning of extremely accurate positioning information, a feature that has attracted substantial research efforts. In this paper, we contribute to this effort by exploring optimal array geometric structures of direct position determination (DPD) systems, inspired by sensor placement problems that predominantly focus on two-step localization and have not yet been extended to DPD. Specifically, we research an optimal array placement and orientation strategy for two-dimensional (2-D) DPD systems that use sensors equipped with uniform linear arrays (ULA) to localize an agent. The A-optimality criterion in Bayesian optimal (experimental) design theory is invoked to formulate this problem. We use an optimization subproblem that optimizes array orientations when array locations are arbitrary but fixed to tackle this high-dimensional optimization problem. Then the optimization problem is converted into a typical optimal angular separation problem in two-step localization. Experimental results show that judiciously designed array geometric structures can lead to significant performance improvements. [ABSTRACT FROM AUTHOR]

This paper derives the asymptotic distribution of the normalized $k$ -th maximum order statistics of a sequence of non-central chi-square random variables with non-identical non-centrality parameters. We demonstrate the utility of these results in characterizing the signal-to-noise ratio in three different applications in wireless communication systems where the statistics of the $k$ -th maximum channel power over Rician fading links are of interest. Furthermore, we derive simple expressions for the asymptotic outage probability, average throughput, achievable throughput, and average bit error probability. The proposed results are validated via extensive Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

The cell-free massive multiple-input multiple-output (CFmMIMO) aims to provide uniform quality of service (QoS) for all users, and can be used in small-area scenarios such as indoor industrial networks. This paper studies the CFmMIMO system for indoor industrial scenarios. Firstly, an access point (AP) grouping based hierarchical network topology is proposed. Based on this, we propose an effective AP selection method. To reduce pilot contamination, a pilot assignment scheme based on inspection robot (IR) location is proposed. Considering the high reliability requirement of industrial data transmission, the power control and backhaul combining are jointly optimized to maximize the minimum signal to interference plus noise ratio (SINR). The scalability of the proposed CFmMIMO system is analyzed, and a scalable power control method is proposed. The simulations demonstrate the effectiveness of the AP selection method, pilot assignment scheme, and the joint optimization algorithm for power control and backhaul combining. Moreover, the impact of network scale and network load on system performance is evaluated and analyzed in the simulations. [ABSTRACT FROM AUTHOR]