Search

Microporous SiO2 can provide large electric-doublelayer (EDL) capacitance and negligible leakage current, owing to lack of electron carrier and limited mobility of mobile ions. The impedance spectroscopy (ionic-conductivity--frequency and capacitance--voltage characteristics) and Fourier-transformed infrared spectroscopy of microporous SiO2 are characterized, which demonstrated that such dielectric is actually a solid-electrolyte dielectric. InGaZnO4 thin-film transistors (TFTs) on paper substrates gated by microporous-SiO2 solid electrolyte are fabricated at roomtemperature.The largeEDL-specific capacitance (1.36 µF/ cm²) results in the paper TFTs operate at a battery-drivable low voltage of 1.0 V. Both depletion-mode (Vth = .0.45 V) and enhancement-mode (Vth = 0.25 V) operations are realized by rationally controlling the oxygen concentration in argon ambient during InGaZnO4 channel deposition. Electrical characteristics with an equivalent field-effect mobility of ~21 cm²/V ⋅ s, a current ON/OFF ratio of greater than 105, and a subthreshold swing of ~80 mV/dec are demonstrated at low frequencies, which are promising for portable paper electronics. [ABSTRACT FROM AUTHOR]

An introduction is presented in which the editor discusses various articles within the issue on topics including research and development in compact models, metal oxide semiconductor field-effect transistors (MOSFET) modeling and RF Compact Model for Bulk MOSFET.

It is my great pleasure to introduce the Seventh Special Issue of the IEEE TRANSACTIONS ON ELECTRON DEVICES on Solid-State Image Sensors. Previous special issues were published in February 1976, August 1985, May 1991, October 1997, January 2003, and November 2009. During the six-year interval since the last special issue, significant changes have occurred in the field of solid-state image sensors. This is due, in particular, to the drive for low-power, high integration, compact imaging systems. Now that the speed of pixel shrinkage is slowing down, various new technologies are being developed to increase the functionality of the sensors, to make them more compact, to make them faster, to increase their dynamic range, etc. Papers reflecting these trends in the image sensor technology are well represented in this special issue. [ABSTRACT FROM AUTHOR]

The physical mechanisms involved in the trapping and de-trapping processes associated with surface donor traps in gallium nitride (GaN) transistors are discussed in this paper. The paper challenges the conventional transient techniques adopted for extrapolating the trap energy level via experiments and TCAD simulations. Transient TCAD simulations were employed to reproduce the time-dependent electrical behavior of a metal-on-insulator field-effect transistor and explain the influence of the electric field and energy barrier on the transient time associated with the trapping and de-trapping mechanisms of surface traps. The comparison between three test structures and the relative variation of the trapping and de-trapping times with the bias and trap parameters leads to the suggestion of a proposed test structure and bias configuration to accurately extrapolate the energy level of surface traps in GaN transistors. [ABSTRACT FROM AUTHOR]

In negative capacitance field-effect transistors (NCFETs), drain current may decrease with increasing ${V}_{\mathrm {ds}}$ in the saturation region, leading to negative differential resistance (NDR). While NDR is useful for oscillator design, it is undesirable for most analog circuits. On the other hand, the tendency toward NDR may be used to reduce the normally positive output conductance ( ${g}_{ \mathrm {ds}}$ ) of a short-channel transistor to a nearly zero positive value to achieve higher voltage gain. In this paper, we analyze the NDR effect for NCFET in the static limit and demonstrate that it can be engineered to reduce ${g}_{\mathrm {ds}}$ degradation in short-channel devices. Small and positive $g_{\mathrm{ ds}}$ is achieved without compromising the subthreshold gain, which is crucial for analog applications. The 7-nm ITRS 2.0 FinFET with 0.7 V ${V}_{\mathrm {dd}}$ is used as the baseline device in this paper. [ABSTRACT FROM AUTHOR]

A vertical ultrathin channel formation process for a vertical type double-gate (DG) MOSFET is proposed. Si wet etching using an alkaline solution has newly been found to be significantly retarded by introducing ion bombardment damage. We have also found that the ion bombardment-retarded etching (IBRE) is independent of ion species and the implanted impurities can easily be transferred to be the dopants for source and drain regions of MOSFETs. By utilizing the IBRE, vertical type DG MOSFETs with a 12-nm-thick vertical channel were fabricated successfully. The fabricated vertical DG MOSFETs clearly exhibit the unique advantage of DG MOSFET5, i.e., high improvement of short-channel effect immunity by reducing the channel thickness. Thanks to the ultrathin channel, very low subthreshold slopes of 69.8 mV/dec. for a p-channel and 71.6 mV/dec for an n-channel vertical DG MOSFET are successfully achieved with the gate length of 100 nm. [ABSTRACT FROM AUTHOR]

This paper investigates the impact of quantum capacitance on the intrinsic inversion-capacitance ( C\mathrm{ inv}) characteristics of high-mobility multigate III–V-on-insulator nMOSFETs through a numerical simulation corroborated by the theoretical calculation. Nonmonotonic C\mathrm{ inv} characteristics stemming from the energy dependence of 1-D density-of-states and significant C\mathrm{ inv} degradation due to quantum capacitance have been found in trigate In0.53Ga0.47As and InAs devices based on the ITRS 2018–2024 technology nodes. This paper indicates that, to compensate the excess inversion-charge ( Q\mathrm{ inv} ) loss due to quantum capacitance, the needed mobility gain of the trigate InGaAs and InAs devices (against the Si counterparts) should be at least $\sim 3\times $ and $\sim 4\times $ , respectively. This paper also suggests that the quantum-capacitance-induced Q\mathrm{ inv} loss can be mitigated by raising the fin aspect ratio of the III–V multigate device. [ABSTRACT FROM AUTHOR]

A novel plasma Charge Accumulative Model (pCAM) by calculating time-integrated Fowler–Nordheim (FN) tunneling charges and field of the gate dielectric in plasma processes is proposed in this paper. Our prior studies have developed and presented a quantitative FinFET plasma recording device by an effective fin-shaped field effect transistor (FinFET) contact-to-metal coupling structure to record and quantify plasma ion charges created in FinFET backend processes. In this paper, a precise analytical model is proposed to model the magnitude of plasma ion charges, time-integrated stressing field, and the criteria of the plasma process for optimum FinFET process technology. The new pCAM is highly matching with the measurement result of 16- and 7-nm FinFET wafers. The model can be adapted to practically estimate the plasma damage with different charge types, process parameters, and ion distribution; it can optimize the FinFET process and further understand the plasma damage mechanism in charging processes of 7-nm FinFET and beyond. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel reconfigurable ferroelectric FET (R-FEFET), which can reconfigure its operation between volatile and nonvolatile modes during run-time by dynamically modulating its hysteresis. The R-FEFET comprises of two gates with ferroelectric (FE) in both the gate stacks. One of these terminals serves as a regular gate, while the other is used as a control to introduce reconfigurability. Employing Landau–Khalatnikov equation-based FEFET model, we extensively analyze the device characteristics in both FinFET and planar technologies. We show that by changing the control voltage between 0 and 1 V, the hysteresis width (HW) can be modulated between 1.1 and 0.3 V. In addition, we show the device characteristics and advantages that R-FEFETs possess to overcome the drawbacks encountered with gate leakage in standard FEFETs. The hold margins in the nonvolatile mode of R-FEFETs increase by ~ $10\times $ with respect to standard FEFETs, and the drive current strengths in the volatile mode show 13% improvements when compared to standard FETs. Using the proposed R-FEFETs, we examine a low-power nonvolatile memory design in Part II of this paper. [ABSTRACT FROM AUTHOR]

In this paper, the threshold voltage characteristics of silicon nanowire metal–oxide–semiconductor field-effect transistor (MOSFET) with a double-layer gate structure are presented. This type of device is considered to be the most promising application of nanodevice in ultralarge-scale integration, due to several advantages such as similar operation principle as the junctionless nanowire transistor, the screening effect of the upper gate (UG) to shield the lower gate MOSFETs from external electromagnetic disturbance, the tradeoff between the short channel and the thick-gate oxide layer, and the compatible fabrication process with the conventional MOS technology. In this paper, the relations of threshold voltage versus the gate length, the UG bias, the substrate bias, the drain bias, and the temperature are measured and analyzed. Moreover, the penetration effect of the UG electric field is proposed to interpret the short-channel characteristics of the device, and a piecewise curve model is presented to reveal the underlying physics of the relation of the threshold voltage versus the drain bias. The double-layer gate structure technology enables the design of many devices, such as small-signal analog circuit units, single-electron devices, and quantum bit cells. [ABSTRACT FROM AUTHOR]

This paper demonstrates a high-performance black phosphorus nanoribbons field-effect transistor (BPNR-FET) and systematically investigates methods for enhancing its anisotropic carrier transport. The BPNR-FET shows a strong dependence on crystal orientation in which the best mobility performance is achieved in armchair-oriented nanoribbons. A downscaling of nanoribbon width is shown to improve the short-channel effect owing to a better electrostatic gate control. Furthermore, hydrogenation is employed to effectively passivate the dangling bonds and heal the nanoribbon edge defects, leading to nearly hysteresis-free transfer properties. By virtue of bandgap and contact-metal workfunction engineering, n-type BPNR-FET is successfully demonstrated, which enables complementary inverter circuits to be simultaneously realized. This paper unravels the superior performance underscores a conceptually new BPNR-FET, paving the way toward the development of non-planar devices and integrated circuits based on 2-D materials platform. [ABSTRACT FROM AUTHOR]

Superjunction has arguably been the most creative and important concept in the power device field since the introduction of the insulated gate bipolar transistor (IGBT) in the 1980s. It is the only concept known today that has challenged and ultimately proved wrong the well-known theoretical study on the limit of silicon in high-voltage devices. This paper deals with the history, device and process development, and the future prospects of Superjunction technologies. It covers fundamental physics, technological challenges as well as aspects of design and modeling of unipolar devices, such as CoolMOS. The superjunction concept is compared to other methods of enhancing the conductivity of power devices (from bipolar to employment of wide-bandgap materials) to derive its set of benefits and limitations. This paper closes with the application of the superjunction concept to other structures or materials, such as terminations, superjunction IGBTs, or silicon carbide Field Effect Transistors (FETs). [ABSTRACT FROM AUTHOR]

Tunnel FETs (TFETs) have been identified as the most promising steep slope devices for ultralow power logic circuits. In this paper, we demonstrate in-plane InAs/Si TFETs monolithically integrated on Si, using our recently developed template-assisted selective epitaxy approach. These devices represent some of the most scaled TFETs with dimensions of less than 30 nm, combined with excellent aggregate performance with average subthreshold swing (SS), of around 70 mV/decade combined with I\mathrm{\scriptscriptstyle ON} of a few \mu \textA / \mu \textm for |V\mathrm {\mathbf {DS}}| = |V\mathrm {\mathbf {GS}}| = 0.5 V. Here, we will discuss the device fabrication as well as the experimental electrical data. Extensive low temperature characterization and activation energy analysis is used to gain insights into the factors limiting device performance. Combined with the simulation study presented in part 2 of this paper, this will elucidate how traps are ultimately limiting the SS. [ABSTRACT FROM AUTHOR]

Recently demonstrated CMOS circuits based on Ge nanowires (Ge-FET) promise sustained technology scaling because higher mobility Ge guarantees target ${I}_{\text {ON}}$ at a lower ${V}_{{\textit {DD}}}$. Unfortunately, this promise is counterbalanced by the fact that Ge is a poor thermal conductor, thus, the thermal confinement of the surround-gate topology may exacerbate self-heating (SHE) and erode the intrinsic performance gain associated with the high channel mobility. In this paper, we use: 1) electrical and optical methods to, respectively, characterize channel and surface SHE of Ge-FET with various channel lengths ( ${L}_{\text {ch}}$ ), widths ( ${W}_{\text {ch}}$ ), and the number of the nanowires (NWs) (#NW); 2) interpret the results obtained by the 3-D thermal modeling, and compare theoretically the SHE in Ge-FET configured in various topologies, such as bulk FinFET, silicon-on-insulator FinFET, and gate-all-around NW-FET; and 3) embed the results in an electrothermal SPICE simulator to compare the performance of ring oscillators based on Ge-FET and Si-FET. Our results show that the existing Ge-FET (with an airgap) is thermally suboptimal, but once optimized, SHE in Ge-FET would be comparable to that of Si-FET. The results encourage sustained development of Ge-FETs. [ABSTRACT FROM AUTHOR]

With lots of interest in negative capacitance field-effect transistors for ultralow-power complementary metal-oxide-semiconductor technology, negative capacitance thin-film transistors (NCTFTs) have also received much attention. Although previous studies on NCTFTs were done, the NC effect in organic-based TFTs was not studied yet. In this paper, P(VDF-TrFE) ferroelectric-gated P3HT semiconductor channel TFTs are experimentally demonstrated with solution-based fabrication process. Especially, this paper shed light on the NC effect in the organic based TFTs. The step-up current-voltage characteristics are repeatedly and reliably observed in diverse TFTs, and then, with the results, transconductance (gm) amplification implemented by the negative capacitance was delved. Moreover, with the aid of ferroelectric polarization switching, super steep-switching characteristic of the organic-based TFT was experimentally confirmed. These experimental results and discussion would be helpful in understanding NC effects in TFTs. [ABSTRACT FROM AUTHOR]

In this paper, we report a physics-based compact model for monolayer graphene field-effect transistors (m-GFETs) based on the 2-D Density of States of monolayer graphene and the drift-diffusion equation. Furthermore, the Ward-Dutton charge partitioning scheme has been incorporated to the model extending its capabilities to AC and transient simulations. The model has been validated through comparison with DC and RF measurements from two different long-channel m-GFET technologies. Moreover, values of parasitic elements included in the model are extracted from measurements on dedicated test structures and verified through electromagnetic simulations (EM). Finally, an EM-SPICE co-simulation has been carried out to assess the applicability of the developed m-GFET model for the design of “balun” circuits. [ABSTRACT FROM PUBLISHER]

A bond-pad charging protection design for charging-free reference transistor test structures was examined. This paper concludes that truly charging-free reference transistors cannot be realized with the one conventional bond-pad charging protection design of protecting transistor gates only. This, however, can be achieved by simultaneously protecting all terminals of the reference transistors. The simulations, in this paper, reconfirm the earlier important experimental conclusion that placing protection device(s) at transistor gates may inflict severe damage to transistor gate oxides instead of protecting them. The implication of the above suggests that attention may be required in a circuit layout design stage for those transistors which gates begin to connect, at high metal layers, to highly efficient leakage paths, such as protection devices, n-type source/drain diffusion regions, and VSS bus lines, which tend to pull transistor gates to low potentials during a backend integrated-circuit manufacturing process. This paper proposes an optimum bond-pad charging protection design for the truly charging-free reference transistor test structures by considering a minimum usage in a layout space and minimum gate oxide stress in the fuse zap-off process. [ABSTRACT FROM AUTHOR]

In this paper, an improved 4H-SiC U-shaped trench-gate metal–oxide–semiconductor field-effect transistors (UMOSFETs) structure with low ON-resistance (${R}_{ \mathrm{\scriptscriptstyle ON}}$) and switching energy loss is proposed. The novel structure features an added n-type region, which reduces ON-resistance of the device significantly while maintaining the breakdown voltage (${V}_{\textsf {BR}}$). In addition, the gate of the improved structure is designed as a p-n junction to reduce the switching energy loss. Simulations by Sentaurus TCAD are carried out to reveal the working mechanism of this improved structure. For the static performance, the ON-resistance and the figure of merit (FOM $= {V}_{\textsf {BR}}^{\textsf {2}}/{R}_{ \mathrm{\scriptscriptstyle ON}}$) of the optimized structure are improved by 40% and 44%, respectively, as compared to a conventional trench MOSFET without the added n-type region and modified gate. For the dynamic performance, the turn-on time (${T}_{ \mathrm{\scriptscriptstyle ON}}$) and turn-off time (${T}_{ \mathrm{\scriptscriptstyle OFF}}$) of the proposed structure are both shorter than that of the conventional structure, bringing a 43% and 30% reduction in turn-on energy loss and total switching energy loss (${E}_{\mathbf {SW}}$). [ABSTRACT FROM AUTHOR]

In the domain of printed electronics (PE), field-effect transistors (FETs) with an oxide semiconductor channel are very promising. In particular, the use of high gate-capacitance of the composite solid polymer electrolytes (CSPEs) as a gate-insulator ensures extremely low voltage requirements. Besides high gate capacitance, such CSPEs are proven to be easily printable, stable in air over wide temperature ranges, and possess high ion conductivity. These CSPEs can be sensitive to moisture, especially for high surface-to-volume ratio printed thin films. In this paper, we provide a comprehensive experimental study on the effect of humidity on CSPE-gated single transistors. At the circuit level, the performance of ring oscillators (ROs) has been compared for various humidity conditions. The experimental results of the electrolyte-gated FETs (EGFETs) demonstrate rather comparable currents between 30%–90% humidity levels. However, the shifted transistor parameters lead to a significant performance change of the RO frequency behavior. The study in this paper shows the need of an impermeable encapsulation for the CSPE-gated FETs to ensure identical performance at all humidity conditions. [ABSTRACT FROM AUTHOR]

Ferroelectric and negative-capacitance field-effect transistors (FeFETs and NCFETs) have recently garnered great attention as devices for applications in memory and low-power logic, respectively. As these technologies are pursued, it is critical to have a variety of measurement approaches, including methods familiar to the electron-device and microwave communities that can aid in fully understanding the behavior of ferroelectrics in FeFETs and NCFETs. In this paper, we propose and show the viability of using frequency-domain electrical measurement techniques employing the well-known microwave S-parameters, and their large-signal generalization and X-parameters. Our methods provide the means to trace the intrinsic polarization versus electric-field curve of the ferroelectric, i.e., with the parasitics de-embedded, thereby showing the innate ferroelectric response, which cannot be done using conventional techniques. These methods also enable extraction of all the parameters of the Landau–Khalatnikov equation, which is commonly used to model ferroelectric behavior in FeFETs and NCFETs. This paper hence takes a useful step toward methods familiar to the electron-device community that can help to better understand and optimize FeFET and NCFET technologies. [ABSTRACT FROM AUTHOR]

In this paper, we show that MoS2 multilayers have mechanical and electrical properties that qualify them as promising channel materials for an n-type piezoelectric FET (PZ-FET). We present extensive density functional theory calculations to investigate the effects of a compressive, out-of-plane stress on MoS2 monolayers and multilayers and extract the corresponding stiffness, as well as the sensitivity to stress of the conduction and valence band edge, and of the effective masses. Then, we use these material properties and a top-of-the-barrier ballistic transistor model to evaluate numerically the ${I}_{\textsf {DS}}$ versus ${V}_{\textsf {G}}$ characteristics of n-type PZ-FETs with an MoS2 channel material. Our results indicate that MoS2 multilayers are the best material option for n-type PZ-FETs, which can reach a subthreshold swing of about 40 mV/decade for a 5-nm-thick piezoelectric layer. This is because the weak interlayer van der Waals bonding makes the conduction band edge in MoS2 multilayers very sensitive to vertical compressive stress. The simulated MoS2 PZ-FETs exhibit large ${I}_{ \mathrm{\scriptscriptstyle ON}}/{I}_{ \mathrm{\scriptscriptstyle OFF}}$ ratios at low voltage and have better subthreshold steepness compared with the counterpart device employing a 3-D semiconductor. [ABSTRACT FROM AUTHOR]

This paper examines metal–ferroelectric–insulator–semiconductor negative-capacitance FinFET (NC-FinFET) based VLSI subsystem-level logic circuits. For the first time, with the aid of a short-channel NC-FinFET compact model, we confirm the functionality and evaluate the standby-power/switching-energy/delay performance of large logic circuits (e.g., dynamic 4-bit Manchester carry-chain adder and the formal hierarchical 32-bit carry-look-ahead adder) employing 14-nm ultra-low-power NC-FinFETs. Our study indicates that the inverse Vds-dependence of threshold voltage (VT), also known as the negative drain-induced barrier lowering, of negative-capacitance field-effect transistor is not only acceptable but also beneficial for the speed performance of both the static and pass-transistor logic (PTL) circuits, especially for the PTL at low VDD. [ABSTRACT FROM AUTHOR]

In this paper, we develop an accurate analytical electrostatic potential model for both the n-type and p-type double-gate heterostructure tunnel field-effect transistors (H-TFETs). We solve the Poisson’s equation in four distinct regions inside the device, the depletion regions of the source, channel, and drain, and the drift-diffusion region of the channel, where the mobile charge carriers should be taken into account. It is shown that the model predicts the electrostatic potential profile of the various heterostructure devices with different material systems in all regions of the device operation accurately. The potential model is used for developing a model for the tunneling distance at the given energy level. Due to the physical nature of the models, the influence of the transistor parameters on the electrostatic characteristics of H-TFETs with desired heterojunction materials may be easily pursued. We show that the model results accurately predict the numerical simulation results for different device parameters. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel static random access memory (SRAM) unit cell design and its array structure consisting of single-gated feedback field-effect transistors (FBFETs). To verify the SRAM characteristics, the basic memory operations and write disturbances of the unit cell are investigated through the mixed-mode technology computer-aided design simulations. The unit cell exhibits the superior SRAM characteristics including a write speed of 0.6 ns, a fast read-out speed of ~0.1 ns, and a retention time of 3600 s. Furthermore, the unit cell design exhibits advantages in density, with a small cell area of 8F2, and in the power consumption; the standby power consumption is 0.24 nW/bit for holding “1” and negligible for holding “0.” Moreover, our SRAM array shows reliable ${3} \times {3}$ array operations without any disturbances. This paper demonstrates the promising potential of the FBFET SRAM for high-performance, high-density, and low-power memory applications. [ABSTRACT FROM AUTHOR]

Feedback field-effect transistor (FBFET), an alternative switching device, has received attention due to its ideal steep switching feature. By utilizing the positive feedback phenomenon, the total amount of electrons and holes contributing to drain current is sharply surged. Although the device has conspicuous subthreshold slope (SS) properties, advanced research for structure and performance of it is lacking. In this paper, single-gated and spacer-less silicon-on-insulator (SOI) FBFET with extremely steep switching (~1 mV/decade) characteristic is studied in various aspects; SS attribute, performance variation of scaled FBFET, the impact of structural variation, the gate margin for the device layout, and the hysteresis window. The prospect of SOI FBFET as a future candidate for CMOS logic application is investigated in detail. [ABSTRACT FROM AUTHOR]

Ballistic (collision free) and drift-diffusive (collision dominated) transport mechanisms are both present in graphene, and they together contribute in the current conduction in a graphene FET (GFET). In this paper, we propose an analytical drain current model based on ballistic (${n}_{B}$) and drift-diffusive (${n}_{D}$) charge densities, backscattering coefficient (${R}$), and quasi-ballistic mobility ($\mu _{\text {eff}}$). ${n}_{B}$ is calculated using the McKelvey flux theory and ${n}_{D}$ using the surface potential approach. A closed-form analytical expression is derived for the backscattering coefficient, which is valid under both low and high electric field conditions. The effective quasi-ballistic mobility is obtained by considering both scattering-dominated and scattering free mobilities. The proposed model is well aligned with experimental data, in all regions of operation, for single- and double-gate GFETs. [ABSTRACT FROM AUTHOR]

The inclusion of quantum effects in the transport direction plays an important role in the extensive research of ultrascaled electronic devices. In this context, it is necessary to study how these phenomena affect different technological architectures in order to conclude which one can be the best candidate to replace standard technology. This paper presents the implementation of direct source-to-drain tunneling effect in a multisubband ensemble Monte Carlo simulator showing its influence in different structures such as fully depleted silicon-on-insulator, double-gate silicon-on-insulator, and FinFET devices. The differences in the potential profile and the electron distribution in the subbands for these architectures modify the number of electrons affected by this quantum mechanism and, therefore, their short-channel behavior. [ABSTRACT FROM AUTHOR]

We report on the fabrication and characterization of field-effect transistors (FETs) based on chemical vapor deposited (CVD) graphene encapsulated between few layer CVD boron nitride (BN) sheets with complementary metal–oxide–semiconductor (CMOS) compatible nickel edge contacts. Noncontact terahertz time-domain spectroscopy (THz-TDS) of large-area BN/graphene/ BN (BN/G/BN) stacks reveals average sheet conductivity >1 mS/sq. and average mobility of 2500 cm2/V $\cdot $ s. Improved output conductance is observed in dc measurements under ambient conditions, indicating the potential for radio frequency (RF) applications. Moreover, we report a maximum voltage gain of 6 dB from a low-frequency signal amplifier circuit. RF characterization of the GFETs yields an ${f}_{T}\times {L}_{g}$ product of 2.64 GHz $\cdot ~\mu \text{m}$ and an ${f}_{{\textsf {Max}}}\times {L}_{g}$ product of 5.88 GHz $\cdot ~\mu \text{m}$. This paper presents for the first time THz-TDS usage in combination with other characterization methods for device performance assessment on BN/G/BN stacks. The results serve as a step toward scalable, all CVD 2-D material-based FETs for CMOS compatible future nanoelectronic circuit architectures. [ABSTRACT FROM AUTHOR]

With the aid of an analytical and general model, this paper investigates the intrinsic difference in the negative-capacitance (NC) effect and design space between semiconductor-on-insulator (SOI) and double-gate (DG) metal–ferroelectric–insulator–semiconductor-type NC field-effect transistors (NCFETs) with a 2-D semiconducting transition-metal-dichalcogenide channel (2-D NCFET). By examining the distributions of internal charge, voltage gain, and capacitance matching over the whole bias range, the intrinsic difference in NC effects between these two topologies is pointed out and explained. Our study indicates that for an intrinsic DG 2-D NCFET, it is difficult to achieve sub-2.3 kT/q average subthreshold swing (SS). By contrast, the bias-dependent subthreshold internal charge and larger curvature of ferroelectric capacitance due to the independent backgate in the SOI 2-D NCFET enable larger design space and sub-2.3 kT/q average SS, making it more suitable for low-power applications. [ABSTRACT FROM AUTHOR]

In this paper, we present a charge-based compact model for transition metal dichalcogenide (TMD)-based thin-channel field-effect transistor. In model development, first, charge densities at the source and drain terminals are calculated in terms of the applied gate and drain voltages. Calculated charge densities are then used to develop a charge-based drain-current model. Effects of interface traps, ambipolar current behavior, and negative capacitance are then included in the developed drain-current model in terms of charge densities. Predictions of the proposed model are verified by the simulation and experimental data of the TMD channel material-based n-type and p-type MOSFETs. [ABSTRACT FROM AUTHOR]

Recently, sub-10-nm-diameter InGaAs vertical nanowire (VNW) MOSFETs have been demonstrated. The key to this achievement was the use of Ni for the top ohmic contact. In this paper, we present a detailed study of the impact of Ni and Mo contacts on the electrical characteristics of highly scaled InGaAs VNW MOSFETs. Sequential annealing experiments are presented that reveal the optimum temperature for each type of contact. A negative temperature dependence of the ON-resistance of 7-nm-diameter Ni-contacted devices suggests the existence of an energy barrier. We also observe an unexpected transconductance and drain-induced barrier loweirng (DIBL) dependence on transistor diameter in Ni-contacted devices as well as abnormal DIBL asymmetry to swapping source and drain. All these results can be explained by Ni diffusing down the nanowire during the contact annealing process, reducing the effective channel length, and creating a Schottky-barrier drain. [ABSTRACT FROM AUTHOR]

This paper presents a generalization of the charge-based model for ultrathin junctionless double-gate (JLDG) field-effect transistors (FETs) by including quantum electron density. The analytical derivation relies on a first-order correction to the infinite quantum well. When restricting the analysis to the first and second quantized states, the free carrier charge distribution and the current in an ultrathin body JLDG FETs are in agreement with numerical TCAD simulations in all the regions of operation, i.e., from deep depletion to accumulation and from linear to saturation. [ABSTRACT FROM AUTHOR]

This paper presents a compact analytical I – V model for short-channel double-gate transition metal dichalcogenide filed-effect transistors in the subthreshold region. A closed-form expression is proposed for the characteristic length in the scale length approach, which is based on physical device parameters. It is then used to find the channel potential and drain current in the subthreshold region. This model is verified with the numerical results of a nonequilibrium Green’s function (NEGF) simulator. There is good agreement between the results of the proposed model and the numerical NEGF simulations in the subthreshold region, while it captures the effects of the device’s physical parameters. [ABSTRACT FROM PUBLISHER]

In our earlier work, we presented a percolation theory-based analytical model to estimate FinFET’s VT distribution due to fin edge roughness. The earlier models in the literature were based on minimum fin width, the limitations of which were discussed in detail. In this paper, we advance the percolation theory-based model to capture the variability in all key-device parameters, viz. I \mathrm{\scriptscriptstyle ON} , I \mathrm{\scriptscriptstyle OFF} , subthreshold slope, and VT . The entire distribution of these parameters obtained by the model is presented and compared against stochastic TCAD to demonstrate excellent match. The model reduces rms error in $\mu $ of various parameters by 5%–60%, and 20%–50% in $\sigma $ with respect to the minimum fin width-based models present in the literature. [ABSTRACT FROM PUBLISHER]

In this paper, a 1-Transitor (1-T) capacitorless dynamic random access memory (DRAM) using bandgap-engineered silicon-germanium Bipolar ionization metal oxide semiconductor field effect transistor (I-MOS) is investigated through numerical simulations. We have demonstrated the application of the proposed Si0.6Ge0.4 Bipolar I-MOS for realization of a 1-T capacitorless DRAM. The proposed device can achieve hysteresis at significantly lower drain voltages ( V\mathrm{LD} =0.45 V to V\mathrm{LU} =1.15 V), in comparison to the inversion mode device ( V\mathrm{LD} = 8 V to V\mathrm{LU} =11 V). In addition, the proposed 1-T capacitorless DRAM exhibits a wider hysteresis window ( \Delta \textV ) of the order ~700 mV and a sensing margin ( \Delta \textI ) of ~5 orders in comparison to the inversion mode based 1-T capacitorless DRAM. Moreover, the proposed 1-T capacitorless DRAM exhibits the retention time of ~750 msec and ~320 msec for T = 25 °C and T = 85 °C, respectively. The proposed 1-T capacitorless DRAM also shows nondestructive read and an extreme long-term endurance. Therefore, the results presented in this paper can provide an opportunity for future DRAM design in deep nanometer technology. [ABSTRACT FROM PUBLISHER]

An analytical model for junctionless double-gate FETs (JLDGFETs) in the subthreshold region is proposed in this paper. As the analytical models based on Young’s approximation demonstrate certain limitations due to the heavily doped channel of the JLDGFET, it is essential to model the electrical characteristics of a JLDGFET using alternative methods. Therefore, in this paper, by using the Fourier series and Green’s function, the potential distribution ( \phi ( {x} , {y} )) in the channel is solved, and the hot-carrier effects and random dopant fluctuation are modeled using localized trap charges and macroscopic analysis. Using the calculated \phi (x, y), {I} _{{\mathsf {DS}}} and {V} _{{\mathsf {th}}} are solved analytically with respect to various L and t {\mathsf {ox}} variations, subthreshold swing, the drain-induced barrier lowering, the localized trap charges, and a single impurity dopant. All results from the analytical model are verified through comparisons with commercially available 2-D ATLAS numerical simulation results. [ABSTRACT FROM PUBLISHER]

This paper examines the fundamental reliability differences between n-p-n and p-n-p SiGe HBTs. The device profile, hot carrier transport, and oxide interface differences between the two device types are explored in detail as they relate to device reliability. After careful analysis under identical electrical stress conditions for n-p-n and p-n-p, the differences in activation energies for the damage of the oxide interfaces of the two devices is determined to be the primary cause for accelerated degradation seen in p-n-p SiGe HBTs. An analytical model has been adapted for simulating these aging differences between p-n-p and n-p-n devices. This paper has significant implications for predicting the degradation of complementary SiGe HBTs and even engineering future generations with well-matched n-p-n and p-n-p device-level reliability. [ABSTRACT FROM PUBLISHER]

In this paper, we systematically examined the impact of fin height ( H\mathrm{ Fin} ) and fin angle ( \theta \mathrm{ Fin} ) on the ac performance parameters including total gate capacitance ( C\mathrm{ gg} ), RC delay ( C_{\mathrm{ gg}}V_{\mathrm{ DD}}/I_{\mathrm{\scriptscriptstyle ON}} ), cutoff frequency ( f_{T} ), energy ( E ), total power ( P_{\mathrm{ Total}} ), and leakage power ( P_{\mathrm{ Leakage}} ) of hybrid FinFETs at the supply voltage, V\mathrm{ DD} with on-current I\mathrm{\scriptscriptstyle ON} . The RC delay, energy, and total power consumption are the primary factors limiting the operating frequency of the high-performance devices. Therefore, these electrical parameters are needed to be addressed in the architectural level of the fin based devices. In this paper, a calibrated numerical device simulation tool is used to achieve the best device performances of 14-nm hybrid FinFETs. From the simulated current–voltage ( I – V ) and capacitance–voltage ( C – C\mathrm{ gg}V\mathrm{ DD}/I\mathrm{\scriptscriptstyle ON} , fT , CV2, P\mathrm{ Total} , and P\mathrm{ Leakage} are extracted to analyze the effect of H\mathrm{ Fin} and \theta \mathrm{ Fin} on the performance matrices of these devices. In addition, this paper proposes an optimum structural configuration for 14-nm hybrid FinFET architecture for digital application perspective. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel dual-metal gate-stack (DMSG) architecture with HfO2 spacer for scaling the nanowire FETs (NWFETs) to the sub-10-nm regime. We demonstrate that the electric field at the channel–drain extension interface is reduced when the inbuilt electric field arising due to a difference in the work function at the interface of the two metals in the DMSG is coupled to the nanowire through the fringing fields through the HfO2 spacer. The reduction in the electric field leads to a larger tunneling width, and therefore suppresses the lateral band-to-band-tunneling component of the gate-induced drain leakage in the DMSG NWFETs. Although the gate capacitance increases in the DMSG NWFETs due to the fringing fields, this paper demonstrates that the increase in the intrinsic delay (~1.5 times) is not very significant to degrade the circuit performance drastically. Using calibrated 3-D simulations, we show that the off-state current is reduced by more than five orders of magnitude in the DMSG NWFETs, leading to a significantly high on-state to off-state current ratio of ~106 even when the channel length is scaled to 7 nm. [ABSTRACT FROM PUBLISHER]

An electrostatic nonuniformity in the cantilever vertical tunneling FETs intrinsically exists in the InAs/GaSb junction to InAs cantilever transition region. The effects of the coupling ratio (CR) nonuniformity are investigated in this paper. The results show that the switching characteristics are degraded by the CR nonuniformity, especially in the case of large InAs/GaSb band offset. This paper also reveals that the nonuniformity in InAs/GaSb vertical tunneling FETs can be mitigated with the optimized band offset of heterojunction, scaling of oxide thickness, and acute angle etching profile. [ABSTRACT FROM AUTHOR]

This paper presents a circuit performance benchmarking using the large-signal model of graphene FET reported in Part I of this two-part paper. To test the model, it has been implemented in a circuit simulator. In particular, we have simulated a high-frequency performance amplifier, together with other circuits that take the advantage of the ambipolarity of graphene, such as a frequency doubler, an RF subharmonic mixer, and a multiplier phase detector. A variety of simulations comprising dc, transient dynamics, Bode diagram, S parameters, and power spectrum have been compared with experimental data to assess the validity of the model. [ABSTRACT FROM PUBLISHER]

Thermal performance characteristics of fin-shaped FETs (FinFETs) are studied and analyzed in this paper for sub-22-nm technologies using the well-calibrated TCAD simulations. In this paper, we show that bulk FinFETs have a relatively better thermal performance as compared with SOI FinFETs. In order to understand the isothermal characteristics of these devices because of thermal effects, we use pulse rise-time as well as ac conductance methods. We demonstrate that the ac conductance method fails to accurately capture thermal time constants for FinFETs, as self-heating and gate resistance regions are indistinguishable from each other. A pulse rise-time method gives isothermal characteristics of these devices. As verified from both these independent techniques, only at high frequencies (>1 GHz), FinFETs show a suppression of thermally induced degradation, which can be attributed to their higher surface-to-volume ratio. It is observed that bulk FinFETs will perform better than SOI FinFETs for small effective fin heights. However, as we show in this paper, increased body doping in bulk FinFETs will increase the self-heating effects. Channel length scaling in FinFETs, which shows a decrease in drain current degradation with heating, will be an important design parameter for sub-22-nm devices. [ABSTRACT FROM AUTHOR]

In this paper, we identify the level shifter (LS) for voltage up-conversion from the ultralow-voltage regime as a key application domain of tunnel FETs (TFETs). We propose a mixed TFET–MOSFET LS design methodology, which exploits the complementary characteristics of TFET and MOSFET devices. Simulation results show that the hybrid LS exhibits superior dynamic performance at the same static power consumption compared with the conventional MOSFET and pure TFET solutions. The advantage of the mixed design with respect to the conventional MOSFET approach is emphasized when lower voltage signals have to be up-converted, reaching an improvement of the energy-delay product up to three decades. When compared with the full MOSFET design, the mixed TFET–MOSFET solution appears to be less sensitive toward threshold voltage variations in terms of dynamic figures of merit, at the expense of higher leakage variability. Similar results are obtained for four different LS topologies, thus indicating that the hybrid TFET–MOSFET approach offers intrinsic advantages in the design of LS for voltage up-conversion from the ultralow-voltage regime compared with the conventional MOSFET and pure TFET solutions. [ABSTRACT FROM PUBLISHER]

In this paper, a resistance-based drain current model for dual-gate graphene FETs (GFETs) is presented, in which an existing analytical model for the sheet charge density for dual-gate structures has been extended for single-gate architectures. In addition, in order to ensure charge and potential continuity throughout the device, unaccounted for in the literature, a new parameter, Debye length, for graphene has been introduced, and a heuristic model for it has been proposed. The carrier mobility in graphene has been modeled in this paper by proposing a new hypothesis for carrier transport in the graphene layer of GFETs, and is a function only of the applied voltages—resulting in significant savings in terms of computational time. Also, the source and drain region resistances (assumed constant in the literature, which is physically unacceptable) have been modeled in this paper based on the charge distributions in these regions. The modeled drain current not only produced well-behaved drain conductance and transconductance over the entire bias range but also showed a very good match with the experimental data published elsewhere, while reducing the maximum error as compared with the simulated results of some existing works. [ABSTRACT FROM PUBLISHER]

This paper presents the study of the chopper-stabilized magnetic field effect transistor (CHOPFET), a high-resolution silicon magnetic transducer. After a full description of its structure and operating principle, a 3-D multiphysics model is proposed. This model combines the electrical model of conventional silicon electronic devices (i.e., transistors) and the magnetic model in order to obtain accurate transduction effect prediction. Experimental results collected from a set of CHOPFET transducers fabricated in AMS $0.35~\mu \text{m}$ standard CMOS technology effortlessly match the simulations performed on the same process. Analysis and discussions reveal one key result: when the CHOPFET is appropriately biased, its channel current, ${I}_{\text {DS}}$ , can be lowered without magnetic sensitivity loss, i.e., the CHOPFET can achieve high-resolution performance even when operated in a low-power mode. [ABSTRACT FROM AUTHOR]

In this paper, a n-type junctionless FET (JLFET) with a p-type fin body (FB) is investigated using a 3-D numerical simulator. We show that the proposed device (FB-JLFET) with a p+ FB can control the electrostatic potential of the channel more efficiently for multi- ${V} _{\text{TH}}$ (threshold voltage) and dynamic threshold (DT) operation. Moreover, body bias application is implemented in FB-JLFET and a large body factor ($\gamma $) is predicted for wide range ${V} _{\text{TH}}$ modulation. Thanks to the stronger potential coupling between the channel and FB, the proposed device exhibits $\gamma $ improvement compared to the conventional JL bulk FinFETs under the same electrostatic control. In addition, DT operation is studied in the form of a JLFET for the first time and it exhibits 37% improvement of the on-state drive current and better subthreshold swing (S.S.) compared to FB-JLFET without DT. This paper provides the feasibility of multi- ${V} _{\text{TH}}$ operation with body bias mode for high performance or low-power applications and DT operation for high-speed circuits with low power consumption. [ABSTRACT FROM AUTHOR]

This paper inquires the phonon transport and temperature distribution in graphene nanoribbon field-effect transistor (GNRFET). We propose a modified Ballistic-diffusive equation model (BDE) to explore the phonon transport in GNRFET transistors. In addition, we have studied the effect of the channel length on thermal characteristics. Finite-element approximation used to study the temperature distribution in nano-GNRFET. The proposed model has been validated on the basis of available results from the literature. Our results shows that phonon transport predicted by the proposed BDE model is close to that obtained by Boltzmann transport equation. We found that the proposed model is able to estimate the thermal performance of GNRFET. The results prove also that the characteristic length of the GNR has no important role in the increasing of the temperature. [ABSTRACT FROM AUTHOR]

Through numerical simulations corroborated by an analytical subthreshold model considering drain coupling, this paper systematically investigates the short-channel effects in negative-capacitance FETs with 2D MoS2 channel (2D-NCFET). Our study indicates that, due to the impact of drain coupling on the negative-capacitance effect, the 2D-NCFET exhibits distinct short-channel behaviors such as improved average subthreshold swing and threshold-voltage roll-up with decreasing gate length. In addition, the fringe field through the high-k interlayer dielectric can significantly alter the subthreshold characteristics of the short-channel 2D-NCFET, and hence needs to be carefully taken into account. Our study may provide insights for device design using negative-capacitance FETs. [ABSTRACT FROM AUTHOR]

In this paper, a new method for equivalent oxide thickness extraction from accumulation capacitance measurements is proposed, which is suitable for fully depleted channels with a body contact such as bulk fin field-effect transistor (FinFET) devices. First, the limitation of the previous approaches reported in the literature is discussed. A new implicit relationship between the semiconductor charge and the surface potential taking into account the increase in the sub-band energies above the conduction/valence band edge is proposed and utilized as a basis for the new extraction method. The efficiency of this method is tested through experimental measurements on a FinFET capacitance and TCAD simulations. [ABSTRACT FROM AUTHOR]

Efficient charge carrier transport in organic thin film transistors (OTFTs) often requires thin films with highly oriented feature. Although there are a number of methods to effectively form high-degree and large-scale alignment during the process of film formation, these methods usually resulted in nonuniform films. In order to obtain highly aligned uniform films, this paper provides a postalignment method after film formation. By applying electric field during solvent annealing, the polymer backbone can be reorganized along the direction of the electric field, leading to highly aligned polymer chains and significant improvement in charge mobility. In addition, after doping the polymer films with liquid crystal (LC), with the benefit of LC molecules' template, the degree of orientation of polymer molecular chains was further enhanced, resulting in further improvement of the charge mobility up to 9.42 cm² ·V-1·s-1. This paper exhibits the possibility of improving charge transport after film formation to obtain high-performance solution-processable OTFT for low-cost and large-scale organic electronics. [ABSTRACT FROM AUTHOR]