Search

The airborne laser scanner (ALS) provides great potential for mapping the leaf area index (LAI) at the landscape scale using grid cell statistics, while its application is restricted by the lack of clumping information, which has been an unsolved issue highlighted for a long time. ALS generally provides an effective LAI because its footprint is too large to capture small gaps to apply traditional ground-based clumping correction methods. Here, we present a grid cell method based on path length distribution model to calculate the clumping-corrected LAI using ALS data without the requirement of additional field measurements. We separated the within- and between-crown areas to consider between-crown clumping, and used the path length distribution as estimated by local canopy height distribution to consider 3-D foliage profile and within-crown clumping. The path length distribution model takes advantage of the 3-D information rather than the gap size distribution, thus avoiding the limitation of large ALS footprint. With the 0.4-m-footprint ALS data, the results are generally promising and a multilevel clumping analysis is consistent with landscape flown. The ALS LAIs of different resolutions are consistent, with a difference of less than 5% from 5- to 250-m resolutions. Due to its consistency and simple configuration, the method provides an opportunity to map the clumping-corrected LAI operationally and strengthens the ability of airborne lidar to monitor vegetation change and validate the satellite product. This grid cell method based on path length distribution is worth further testing and application using more recent laser technology. [ABSTRACT FROM AUTHOR]

Scale effect, which is caused by a combination of model nonlinearity and surface heterogeneity, has been of interest to the remote sensing community for decades. However, there is no current analysis of scale effect in the ground-based indirect measurement of leaf area index (LAI), where model nonlinearity and surface heterogeneity also exist. This paper examines the scale effect on the indirect measurement of LAI. We built multiscale data sets based on realistic scenes and field measurements. We then implemented five representative methods of indirect LAI measurement at scales (segment lengths) that range from meters to hundreds of meters. The results show varying degrees of deviation and fluctuation that exist in all five methods when the segment length is shorter than 20 m. The retrieved LAI from either Beer's law or the gap-size distribution method shows a decreasing trend with increasing segment lengths. The length at which the LAI values begin to stabilize is about a full period of row in row crops and 100 m in broadleaf or coniferous forests. The impacts of segment length on the finite-length averaging method, the combination of gap-size distribution and finite-length methods, and the path-length distribution method are relatively small. These three methods stabilize at the segment scale longer than 20 m in all scenes. We also find that computing the average LAI of all of the short segment lengths, which is commonly done, is not as good as merging these short segments into a longer one and computing the LAI value of the merged one. [ABSTRACT FROM AUTHOR]

Accurate estimation of the fine-resolution fraction of absorbed photosynthetically active radiation (FPAR) across broad spatial extents and long time periods requires efficient and applicable methods. The existing methods can hardly provide a balance between accuracy, simplicity, and transferability through space and time. Within the remote-sensing trend-surface conceptual framework, this article proposes a scaling-based method to efficiently retrieve FPAR from fine-resolution satellite data using coarse-resolution FPAR products as a reference. The method was particularly developed and applied to Moderate Resolution Imaging Spectroradiometer (MODIS) FPAR product and Landsat imagery. First, necessary prior knowledge related to FPAR retrieval and scaling theories was used to explicitly linearize the complex relationship between MODIS FPAR and Landsat surface reflectance. Second, the explicit linear model for FPAR estimation was trained through one-pair image learning for each date to estimate FPAR from Landsat imagery in real time. Both homogeneous and heterogeneous cases were considered. The method was validated at ten selected worldwide sites from the Validation of Land European Remote Sensing Instruments (VALERI) program and derived an overall root mean squared error (RMSE) of 0.133. A long time series of FPAR data set at the 30-m resolution was generated at the regional scale (approximately 2000 km2) for 13 years (2000–2012). The results were accurate (RMSE = 0.072) and MODIS-consistent, which were significantly better than those of the normalized difference vegetation index (NDVI) downscaling-based and regression tree methods. The scaling-based method provides accurate, MODIS-consistent and spatially consistent FPAR estimates in real time, is highly transferrable through space and time, and allows for future extension of FPAR estimates to the era of the Landsat series satellites. [ABSTRACT FROM AUTHOR]

To improve our capacity to map long-term vegetation dynamics in heterogeneous landscapes, this study proposed a new prior knowledge-based spatiotemporal enhancement method, namely, PK-STEM, to fuse MODIS and Landsat FPAR products following the remote sensing trend surface framework. PK-STEM uses historical Landsat FPAR images as prior knowledge and fuses them with new satellite-derived FPAR data. PK-STEM can work in three modes: 1) using only MODIS data; 2) using only Landsat data; and 3) using both MODIS and Landsat data. This study retrieved FPAR from Landsat images using a scaling-based method and tested the performance of PK-STEM in a regional application. For the entire year of 2012, we compared the performance of PK-STEM in different modes and with that of two typical spatiotemporal fusion methods, the enhanced spatial and temporal adaptive reflectance model (ESTARFM) and unmixing-based linear mixing growth model (LMGM). Then, a long time series FPAR data set at 30-m resolution and eight-day intervals was generated for 13 years (2000–2012). Our results show that PK-STEM in mode III is the most robust and accurate (root mean squared error (RMSE) = 0.062; mean $R = 0.851$) among the three modes and more accurate than ESTARFM (mean RMSE = 0.065; mean $R = 0.776$) and LMGM (mean RMSE = 0.074; mean $R = 0.734$). For the 12 years (2000–2011), PK-STEM also achieves high accuracies with mean RMSE = 0.066 and $R = 0.938$. PK-STEM is very flexible with a continual update mechanism and is efficient for long time series applications. [ABSTRACT FROM AUTHOR]

Occlusion effect, an inherent problem of terrestrial laser scanning (TLS) measurements, limits the potential of TLS data in tree attribute estimation. Multiple scans seek to mitigate this effect to provide enhanced scan completeness. However, the numbers and locations of the scans (i.e., the scan design) are usually determined via a subjective assessment of the tree density, spatial patterns of trees, and attributes to be derived. These could cause suboptimal scan completeness and limit tree attribute estimation. This study proposed an iterative-mode scan design to minimize the occlusion effect. First, we introduced a PoTo index based on visibility analysis to evaluate how many trees can be scanned from a location and to select effective candidates for the optimal TLS location. Second, we introduced a cumulative degree of ring closure (CDRC) to quantify the scan completeness for each candidate and determine the optimal TLS location. The TLS data sets of virtual forests with field-measured and synthetic plot parameter settings were simulated according to iterative- and regular-mode designs by using a Heidelberg light detection and ranging (LiDAR) Operations Simulator (HELIOS). The results demonstrated that an iterative-mode design can improve the scan completeness of trees compared to the regular-mode design. The tree attribute (diameter at breast height (DBH), tree height, stem curve, and crown volume) estimates of the iterative-mode design were less erroneous than those of the regular-mode design (e.g., the root-mean-square error (RMSE) could decrease the stem curve estimation by 38% and the crown volume estimation by 15%). This study suggests that the iterative-mode design can obtain an improved quality of the TLS data, especially for dense stands. [ABSTRACT FROM AUTHOR]

Accurate spectral calibration of the in-flight sensors is crucial for processing and exploration of remotely sensed data. This paper developed a strategy to make spectral recalibration (i.e., spectral response function, central wavelength, and bandwidth) for in-flight broadband sensor using a device-responsivity-decomposition model with a priori knowledge and an optimization algorithm. Sensitivity analysis indicates that an accurate result requires the targets to be observed under a dry and clear atmospheric condition (column water vapor <2\ \g/cm^2 and visibility > 23 km) and no more than 5 \% error is included in the measured data. The new strategy was used to retrieve the spectral parameters along with radiometric calibration coefficients for a multichannel camera onboard an unmanned aerial vehicle from simultaneously remotely sensed and ground measured data sets over 19 (15 color-scaled and four gray-scaled) man-made surface targets, and the retrieved results were validated with a similar data set over another four man-made targets. It demonstrated that the camera's spectral parameters were accurately retrieved and an error less than 3.5 \W/m^2/\mu\m/sr was brought to the channel radiance. [ABSTRACT FROM AUTHOR]