Search

This paper presents a hybrid pulse width modulation-based discontinuous modulation (D-HPWM) strategy with dc-link voltage balancing for a three-level neutral-point-clamped (NPC) traction inverter drive. The results are then compared with continuous-hybrid-PWM (C-HPWM) to check the performance improvement. The HPWM strategy uses both the advantages of carrier- and space-vector-based PWM strategies. The duty cycles are generated using the carrier-based strategy to reduce the computational time and complexity of the system and redundant vector states are used to keep the two dc-link capacitor voltages balanced. As discontinuous PWM (DPWM) reduces the switching losses considerably compared to the continuous PWM, the DPWM strategy is developed in this paper for the HPWM-based strategy. Detailed comparison studies are then carried out in MATLAB/Simulink and PLECS to show the conduction and switching loss distribution with change in modulation index for different power switches. A 54.0-kW surface permanent magnet synchronous machine (PMSM) is used for this simulation studies. Moreover, the total inverter loss and losses in each insulated gate bipolar transistor (IGBT) are also compared. Detailed experimental performance analysis is also carried out with a scaled down prototype of a 6.0-kW surface PMSM, NPC inverter, and real-time emulator DSpace, to show the capacitor voltage deviation with both control strategies. [ABSTRACT FROM PUBLISHER]

This paper presents an improved dc-link voltage balancing algorithm for a three-level neutral-point-clamped inverter by considering phase current direction. Detailed studies on the effects of change in load current direction on the dc-link capacitor voltages are presented. A maximum value of power factor is numerically derived, above which it affects the capacitor voltage balancing capability. Compared with the previously presented research work, the inputs to the space-vector pulsewidth-modulation block are the three phase currents and the difference between the two capacitor voltages. Depending on the states of the two dc-link capacitor voltages and phase current direction, redundant voltage vector sequences are selected. The selected vectors keep the capacitor voltage deviations within 5% of the total dc-link voltage. Two zero switching vectors (i.e., PPP and NNN) are also removed from all subsectors of the earlier proposed strategy, which one used to produce higher common-mode voltages. Detailed simulation and experimental results are presented in this paper for a 6.0-kW surface permanent-magnet synchronous machine. Both the simulation and experimental results show the required performance of the proposed system. [ABSTRACT FROM AUTHOR]

In order to increase the output voltage levels and reduce the isolated dc sources, a symmetrical hybrid nine-level inverter for high-speed motor drive applications is presented in this paper. Each phase of this inverter is composed of a five-level dc/dc converter cell and an H-bridge cell. The dc/dc converter is operated at high frequency with low-voltage devices and the H-bridge is operated at fundamental frequency with high-voltage devices. The three phases are connected to a common dc-link and each drives an isolated winding of an open-winding motor. The operating principles and modulation method are introduced. A detailed analysis of the average currents through the flying capacitor and neutral point of the dc-link is presented and a capacitor voltage balancing method based on phase-shifted pulse-width modulation is proposed. Simulation and experimental results are presented to demonstrate the feasibility of this topology and control method. [ABSTRACT FROM PUBLISHER]