Search

This paper proposes a six-phase surface-mounted permanent-magnet machine with a 24-slot/10-pole fractional slot winding, which not only eliminates the air-gap flux subharmonics, but also minimizes the effect of slot harmonics, which highly affect both the core and magnet losses. The six-phase winding design also offers an improved drive train availability for electric vehicle applications due to its inherent high fault-tolerant capability. When compared with a three-phase design, the proposed winding offers approximately 3.5% improvement in torque density, a significant reduction in both the core and magnet losses, and an improved overall efficiency. The proposed winding is deduced based on the stator shifting concept of two 12-slot/10-pole stators with single tooth windings. The coil span of the resulting machine will be two slots, which stands as a compromise between single tooth and distributed windings. The concept of stator shifting is first presented, and then, a prototype machine is designed and simulated using the 2-D finite-element analysis to validate the proposed concept. A comparative study is also carried out to compare six-phase and three-phase designs with the same slot/pole combination and also with the 18-slot/10-pole combination, which was recently shown to be a competitive alternative. [ABSTRACT FROM AUTHOR]

The interior permanent magnet (IPM) machine equipped with a fractional-slot concentrated winding (FSCW) has met an increasing interest in electric vehicle applications due to its higher power density and efficiency. Torque production is due to both PM and reluctance torques. However, one of the main challenges of FSCWs is their inability to produce a high-quality magnetomotive force (MMF) distribution, yielding undesirable rotor core and magnet eddy-current losses. Literature shows that the reduction of low-order space harmonics significantly reduces these loss components. Moreover, it has been previously shown that by employing a higher number of layers, although causing some reduction in the winding factor of the torque-producing MMF component, both machine saliency and reluctance torque components are improved. Recently, a dual three-phase winding connected in a star/delta connection has also shown promise to concurrently enhance machine torque of a surface-mounted PM machine while significantly reducing both rotor core and magnet losses. In this paper, a multilayer winding configuration and a dual three-phase winding connection are combined and applied to the well-known 12-slot/10-pole IPM machine with v-shaped magnets. The proposed winding layout is compared with a conventional double-layer winding, a dual three-phase double-layer winding, and a four-layer winding. The comparison is carried out using 2-D finite-element analysis. The comparison shows that the proposed winding layout, while providing similar output torque to a conventional double-layer three-phase winding, offers a significant reduction in core and magnet losses, correspondingly a higher efficiency, improves the machine saliency ratio, and maximizes the reluctance toque component. [ABSTRACT FROM AUTHOR]

One of the main drawbacks of nonoverlapped coils in fractional slot concentrated winding permanent magnet (PM) machines are the high eddy current losses in both rotor core and permanent magnets induced by the asynchronous harmonics of the armature reaction field. It has been shown in the literature that the reduction of low space harmonics can effectively reduce the rotor eddy current losses. This paper shows that employing a combined star-delta winding to a three-phase PM machine with fractional slot windings and with a number of slots equal to 12, or its multiples, yields a complete cancellation to the fundamental magneto-motive force (MMF) component, which significantly reduces the induced rotor eddy current. Besides, it offers a slight increase in machine torque density. A case study on the well-known 12-slot/10-pole PM machine is conducted to explore the proposed approach. With the same concept, the general $n$ -phase PM machine occupying $4n$ slots and with a dual $n$ -phase winding is then proposed. This configuration offers a complete cancelation of all harmonics below the torque producing MMF component. Hence, the induced eddy currents in both rotor core and magnets are significantly reduced. The winding connection and the required number of turns for both winding groups are also given. The concept is applied to a 20-slot/18-pole stator with a dual five-phase winding, where the stator winding is connected as a combined star/pentagon connection. The proposed concept is assessed through a simulation study based on 2-D finite element analysis. [ABSTRACT FROM AUTHOR]

Direct-drive permanent magnet (PM) generators have become a strong contender in medium and large rating wind energy conversion systems as they not only provide higher efficiency and annual energy production, but also reduce the operational and maintenance cost. PM generators with nonoverlap single-layer windings provide a cost-effective design variation that eases manufacturing, reduces torque ripples, enhances voltage quality, and provides fault tolerant capability. The performance of such machines depends mainly on the proper selection of the pole and slot numbers, which results in negligible coupling between phases. The preferred slots per phase per pole (SPP) ratios eliminate the effect of low order harmonics in the stator magnetomotive force (MMF), and thereby the vibration and stray loss are reduced. This paper proposes a new three-phase winding configuration based on the 20 slots/18 poles five-phase PM machine. The proposed design is compared with the well-known 24 slots/20 poles three-phase PM machine. The comparison shows that the proposed generator offers reduced torque ripples, improved output voltage quality, and less core loss for the same machine volume. [ABSTRACT FROM PUBLISHER]