Search

The development of new technologies in power generation and application, together with the demand for the reliability and capability of power supply has drawn increasing attention to dc distribution and microgrid technology. This paper introduces the renovation project for a single-circuit XLPE cable line being converted into dc operation after its second failure under 35 kV ac. This is the first time ever in China for this type of system conversion, in which the existing XLPE cable line was put into operation in a bipolar voltage-source converter (VSC) dc system of 10 kV voltage and 150 A current to maintain its 3 MW capacity. The test methods for cable performance that were checked under the designed dc scheme were put forward and conducted on sectioned cable samples. After the cable test and equipment installation, the line was put into operation under the VSC dc topology in 2011. It has now been running for four years without any interruption. Compared with other alternatives for ac operation, this proposal shows advantages in aspects of economy, reliability and engineering. Besides, the theoretical evaluation suggests that the system capacity can be further increased by four times, and the first step is underway for that goal. [ABSTRACT FROM PUBLISHER]

Ice melting with dc is one of the key technologies to prevent the Chinese power grid from ice storms. Especially after the severe ice storm in the southern part of China in early 2008, dc ice-melting technology has drawn more attention than ever before. However, there are few satisfactory methods to select correct parameters so the ice-melting project rarely achieves desired effects in some cases when applied in Hunan, Guizhou, and other provinces in China. Therefore, it is of great significance to develop a method to estimate parameters which is applicable in the practical situation for dc ice melting. To handle this, the factors, such as wind velocity, ambient temperature, current density and ice-layer thickness were analyzed and then a dc ice-melting model is put forward in this paper. Both the results of simulations and experiments show that the ice-melting process can be divided into three stages composed of temperature rising, ice melting, and ice shedding, among which the ice melting is the key stage consuming most of the ice-melting time. In this stage, an elliptic airgap is formed and widened gradually with an influence on the ice-melting time and the temperature of the conductor. The experiments in the artificial climate chamber demonstrate that the results of the presented model are consistent with those of the experiments generally, so it can be employed to estimate the parameters of ice melting in practical engineering as reference. [ABSTRACT FROM AUTHOR]

The breakage of overhead covered conductors on distribution lines resulting from the short-circuit arcs caused by lightning flash becomes a challenge as the application of covered conductors increases on distribution lines. Based on various methodologies and devices developed to avoid the covered conductor breakage in the world, novel arc-guided devices, including arcing protection hardware with barbs, clamping post composite insulator, and barb electrode clamping post porcelain/composite insulator are presented in this paper. Experimental results are also presented to validate these new developed devices. Devices based on the developed technologies have been widely applied on the power grids in China successfully. [ABSTRACT FROM AUTHOR]