4,420 results
Search Results
2. Resonant Switching Cell Model for High-Frequency Single-Ended Resonant Converters.
- Author
-
Lee, Kyung-Hwan and Ha, Jung-Ik
- Subjects
ZERO voltage switching ,ELECTRIC inductance ,CELLS ,DC-to-DC converters - Abstract
This paper proposes a resonant switching cell model to analyze and design the single-ended resonant dc–dc converters. The single-ended zero-voltage switching (ZVS) converters such as the Class E converter are efficient for megahertz switching because they feature low turn-on and turn-off switching losses. Also, they use only a ground-referenced switch, allowing a simple gate drive circuit. In this paper, we investigate the single-ended resonant converter with the small input inductance, whereas the conventional Class E converter has a large input inductance. The main contribution of this paper is to propose the resonant switching cell as an analytic model that simplifies the analysis and the design of the resonant dc–dc converters. Furthermore, this paper presents the design method of the resonant switching cell model for minimizing the resonant current magnitude and conduction loss while the converter maintains ZVS property. The experimental results from a 10-MHz GaN-based prototype demonstrate the feasibility and effectiveness of the analysis and design based on the proposed resonant switching cell model. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
3. Comments on “A Single-Inductor Multiple-Output Switcher With Simultaneous Buck, Boost, and Inverted Outputs”.
- Author
-
Abbasi, Majid, Afifi, Ahmad, and Pahlavani, Mohamad Reza Alizadeh
- Subjects
ELECTRIC current converters ,PULSE width modulation transformers ,ELECTRIC leakage ,ELECTRIC controllers ,RESONANT inverters - Abstract
In the paper by Patra et al., a single-inductor multiple-output switcher was presented to produce buck, boost, and inverted outputs simultaneously. Unfortunately, this study showed some unexpected mistakes, especially in state-space equations and in the calculation of output voltages. The objective of this note was to provide correct analysis and rectify the errors in this paper. Some tables and equations have been modified that were present in the initial draft of this paper. The obtained parameters in this work could be an effective supplement and extension for the original work in the paper by Patra et al. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
4. Topology and Control of a Four-Level ANPC Inverter.
- Author
-
Wang, Kui, Zheng, Zedong, and Li, Yongdong
- Subjects
HIGH voltages ,TOPOLOGY - Abstract
Four-level hybrid-clamped inverter is a newly proposed topology that can operate under a wide voltage range without switches connected in series. However, when it is applied in medium voltage high power conversions, the flying capacitors in each phase will occupy a huge volume and a high switching frequency is required to restrain the voltage ripples. In order to overcome this drawback, a four-level active neutral-point clamped inverter is discussed in this paper, which consists of only six switches and no diodes or flying capacitors are required. In order to balance the neutral-point voltages under the full power factor and modulation index range, a capacitor voltage balance method based on carrier-overlapped pulsewidth modulation is proposed in this paper. The upper and lower dc-link capacitor voltages are balanced by zero-sequence voltage injection and the central dc-link capacitor voltage is balanced by adjusting the duty cycles of switching signals slightly. Simulation and experimental results are presented to confirm the validity of this method. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
5. An Enhanced Multiple Harmonics Analysis Method for Wireless Power Transfer Systems.
- Author
-
Fang, Yaoran, Pong, Bryan Man Hay, and Hui, Ron Shu Yuen
- Subjects
WIRELESS power transmission ,GRAPHICAL user interfaces ,ELECTRIC potential ,ELECTRIC circuits ,PROCESS optimization ,HARMONIC analysis (Mathematics) - Abstract
First harmonic analysis (FHA) is arguably the most widely used analytical technique for wireless power transfer (WPT) circuits due to its simplicity. Although FHA can provide closed-form solutions, the existence of rectifier diode forward voltage drop and higher order harmonics, especially the second and third harmonics at variable duty cycle operation, can significantly deteriorate its accuracy. This paper presents an accurate and efficient method called enhanced multiple harmonic analysis (eMHA) for the optimal design and optimal control of WPT systems. The eMHA method considers the nature of nonlinear rectification networks under nonsinusoidal current and reexamines the concept of the equivalent load. As a result, the rectified WPT system is transformed into a series of linear systems with complex load impedances. The steady-state electric quantities can be then explicitly calculated. This enables eMHA to seamlessly work with numerical optimization algorithms to facilitate the automated design and optimization of WPT systems. An example of optimal design and optimal control of a 10 W WPT system is demonstrated. The results obtained by eMHA and FHA are also compared. A prototype of the designed circuit was constructed. The accuracy and effectiveness of eMHA are verified by experimental measurements. This paper is accompanied by a MATLAB-based analytical tool with a graphical user interface demonstrating the effects of circuit variables on electrical quantities and waveforms. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
6. A Four-Switch Three-Phase AC–DC Converter With Galvanic Isolation.
- Author
-
Khodabakhsh, Javad and Moschopoulos, Gerry
- Subjects
GALVANIC isolation ,AC DC transformers ,ELECTRIC current rectifiers ,IDEAL sources (Electric circuits) ,VIRTUAL private networks ,PULSE width modulation - Abstract
A new single stage three-phase ac–dc converter with four switches and galvanic isolation is proposed in this paper. The new converter is simple and uses fewer switches than previously proposed ac–dc converters of the same type. It is a bridgeless converter that can operate with continuous input current and with any pulsewidth modulated method suitable for a standard three-phase six-switch voltage source rectifier. In this paper, the operation, control, analysis, and design of the proposed converter are explained and its features are discussed. Experimental results obtained from a prototype that confirm the feasibility of the converter are presented as well. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
7. Criteria for Using Antiparallel SiC SBDs With SiC mosfets for SiC-Based Inverters.
- Author
-
Yamaguchi, Koji, Katsura, Kenshiro, Yamada, Tatsuro, and Sato, Yukihiko
- Subjects
SCHOTTKY barrier diodes ,ELECTROMAGNETIC interference ,POWER density ,SILICON carbide ,DIODES - Abstract
The paper confirms that removing antiparallel silicon carbide (SiC) Schottky barrier diodes (SBDs) from SiC-based inverters offers positive effects without critical impact on inverter loss and electromagnetic interference (EMI) issues, moreover, the removal of SBDs reduces the inverter losses in many cases and noise emissions. This conclusion leads to the possibility to improve the power densities by removing SBDs. However, the removal of SBDs may cause some disadvantages such as an increase of the reverse conduction loss and influence of the body diode recovery phenomenon. Therefore, a comprehensive investigation of these advantages and disadvantages is necessary. In this paper, design criteria are proposed to clarify the conditions in which SiC-based inverters without SBDs have advantages over those with SBDs from the viewpoint of losses. On the other hand, to achieve the removal of SBDs, it is also necessary to confirm that removing SBDs does not cause severe EMI issues. The paper confirms that switching noises are reduced by the removal of SBDs; this is due to the larger damping effect of the SiC mosfets without SBDs than that of SiC mosfets with SBDs. The validity of the theoretical analyses and design criteria is confirmed with comprehensive experimental results. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
8. Overload and Short-Circuit Protection Strategy for Voltage Source Inverter-Based UPS.
- Author
-
Wei, Baoze, Marzabal, Albert, Perez, Jose, Pinyol, Ramon, Guerrero, Josep M., and Vasquez, Juan C.
- Subjects
IDEAL sources (Electric circuits) ,OVERCURRENT protection ,SHORT circuits ,UNINTERRUPTIBLE power supply ,VOLTAGE control - Abstract
In this paper, an overload and short-circuit protection method is proposed for voltage source inverter-based uninterruptible power supply (UPS) system. In order to achieve high reliability and availability of the UPS, short circuit and overload protection scheme are necessary. When overload or short circuit happens, using the proposed control method, the amplitude of the output current can be limited to a constant value, which can be set by the customer to avoid the destruction of the power converter, and to obtain a faster recovery performance as well. The detailed principle of the proposed protection method is discussed in this paper. It mainly contains three parts in the control diagram for current limit, first is the anti-windup in the voltage and current controllers, then the feedforward of the capacitor voltage to the current control loop, the last is the fast reset of the resonant part of the current controller when overcurrent happens. The procedure of developing the control method is also presented in the paper. Experimental results on a commercial UPS system are presented to verify the effectiveness of the control method. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
9. Balancing Algorithm for a Self-Powered High-Voltage Switch Using Series-Connected IGBTs for HVDC Applications.
- Author
-
Chivite-Zabalza, Javier, Trainer, David R., Nicholls, Jonathan C., and Davidson, Colin C.
- Subjects
INSULATED gate bipolar transistors ,OVERVOLTAGE ,POWER semiconductor switches ,DIRECT currents ,CLAMPING circuits - Abstract
This paper presents a balancing algorithm for the so-called Director Switch, a controlled, reverse conducting, self-powered, high-voltage switch, using series-connected insulated gate bipolar transistors (IGBTs). This is a key component on two new voltage-source, high-voltage direct current (HVDC) converter topologies. These, which promise efficiency, cost, and size reductions, are an alternate arm converter and a series bridge converter. One of the main design challenges of the director switch is how to supply the IGBT gate drivers, and other auxiliary electronics while overcoming the high-voltage insulation barrier to ground level. In this paper, this is achieved by using the energy stored in a capacitive clamp snubber circuit, which also helps with the overvoltage mitigation during rare hard-switching events. However, the clamp capacitor and by proxy the IGBT voltages become highly unbalanced during operation, compromising the integrity of the switch. This paper presents a balancing strategy that consists in applying a controlled delay in the switching of the IGBT levels, in a way that forces a voltage balance on all the switch levels. The paper explains the unbalance. Then, the balancing strategy is explained and validated on simulation and on a high-voltage experimental rig, on switches comprising two and three series-connected IGBTs, respectively. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
10. HVDC Circuit Breakers Combining Mechanical Switches and a Multilevel PWM Converter: Verification by Downscaled Models.
- Author
-
Suzuki, Atsushi and Akagi, Hirofumi
- Subjects
OCEAN waves ,PULSE width modulation transformers ,INSULATED gate bipolar transistors ,SHORT-circuit currents ,PULSE width modulation inverters - Abstract
This paper presents two high-voltage direct-current circuit breakers that have the capability of interrupting a short-circuit current within several milliseconds. They consist of a current-limit inductor, a current-control inductor, one or two mechanical switches, and a multilevel converter with phase-shifted-carrier pulsewidth modulation. The two breakers can commutate an almost zero current from the main branch to the auxiliary branch. This paper proposes an original breaker with low-voltage and high-voltage mechanical switches connected in series, followed by a simplified breaker with a single high-voltage mechanical switch. Finally, this paper includes experimental verification by two slightly different downscaled breakers rated at 300 Vdc and 150 Adc, as well as confirmation of an actual original breaker by circuit simulation using the “PSCAD/EMTDC” software package. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
11. A High-Efficiency Single-Phase T-Type BCM Microinverter.
- Author
-
Zhang, Zhen, Zhang, Junming, Shao, Shuai, and Zhang, Junjun
- Subjects
ELECTRIC inverters ,LOAD flow analysis (Electric power systems) ,ELECTRIC potential ,TRANSISTORS ,ELECTRIC power distribution grids - Abstract
This paper proposes a high-efficiency single-phase T-type boundary conduction mode (BCM) microinverter. The conventional full-bridge BCM microinverter has achieved zero voltage switching (ZVS) and thereby improved the efficiency, but it suffers from high switching losses under light load conditions. The proposed T-type BCM microinverter reserves ZVS and uses a multilevel technique to further decrease the switching losses. The BCM operation with multilevel technique will have too low switching frequency when the grid voltage approaches half of the dc link voltage. To solve this problem, this paper adopts a third operation mode for the T-type switching leg to maintain the switching frequency above a minimum value. The corresponding mode transitions are also detailed to ensure a smooth operation. Because of the turn-offdelay of the freewheeling transistor, the actual lower current boundary deviates from the programmed one, which will distort output current. To address this issue, this paper also proposes a boundary compensation method. A prototype has been built for performance verification, which can test both full-bridge and T-type topology. Compared with the full-bridge BCM microinverter, the proposed T-type BCM microinverter has a higher efficiency over the whole load range. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
12. Optimization-Based Position Sensorless Finite Control Set Model Predictive Control for IPMSMs.
- Author
-
Nalakath, Shamsuddeen, Sun, Yingguang, Preindl, Matthias, and Emadi, Ali
- Subjects
PREDICTIVE control systems ,PERMANENT magnets ,MATHEMATICAL optimization ,SYNCHRONOUS electric motors ,COST functions - Abstract
This paper presents nonlinear optimization-based position and speed estimation scheme for IPMSM drives with arbitrary signal injection generated by inherent switching ripples associated with finite control set model predictive control (FCSMPC). The existing standard sensorless techniques are not suitable for FCSMPC which applies voltage vectors directly to an electrical machine without a modulator. The proposed method optimizes the nonlinear cost function derived from the standard IPMSM model with respect to position and speed at every sampling interval. This method can be applied to any type of signal injection and, hence, an ideal candidate for sensorless FCSMPC. In this method, the signal injection is needed only to generate persistent excitation to maintain the observability at low speeds. A strong persistent excitation is always present with FCSMPC except at standstill where the control applies null vector when the reference currents are zero. This situation is overcome in this paper by introducing a small negative $d$ -axis current at standstill. Thus, the proposed method can estimate the position and speed over a wide speed range starting from standstill to the rated speed without a changeover or additional signal injection. This paper also presents detailed convergence analysis and proposes a compensator for standstill operation that prevents converging to saddle and symmetrical solutions, and therefore, also eliminates the well-known ambiguity of $\pi$ rad in position estimation. The performance of the proposed sensorless scheme is experimentally verified for a wide range of operating conditions. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
13. Dynamic Control and Performance of a Dual-Active-Bridge DC–DC Converter.
- Author
-
Takagi, Kazuto and Fujita, Hideaki
- Subjects
CASCADE converters ,DIRECT currents ,PHASE-shifting interferometry ,PHASE shifters ,MAGNETIC flux ,ELECTRIC potential ,CONTINUOUS functions - Abstract
This paper discusses dynamic behavior of a dual-active-bridge (DAB) dc–dc converter. Conventional phase-shift control methods for the DAB converter may cause dc offsets in both inductor current and transformer magnetizing current in transient states. The dc offset in the inductor current would introduce an excessive peak current through the switching devices. The dc offset in the magnetizing current may induce magnetic-flux saturation. Conventional methods simultaneously turn on and off the diagonal switches in each H-bridge converter and produce a square-wave voltage with a 50% duty ratio. In contrast, the proposed method in this paper independently controls each switch to modify the duty ratio in transient states. This paper clearly derives the requirements of each switch to eliminate the dc offsets in both currents with a settling time shorter than half the switching period. Experimental results using a 5-kW 20-kHz system verify the validity of the proposed control method, which is effective not only in a single step change, but also in a continuous change in the phase-shift reference. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
14. Measurement Methodology for Accurate Modeling of SiC MOSFET Switching Behavior Over Wide Voltage and Current Ranges.
- Author
-
Sakairi, Hiroyuki, Yanagi, Tatsuya, Otake, Hirotaka, Kuroda, Naotaka, and Tanigawa, Hiroaki
- Subjects
SILICON carbide ,FIELD effect transistor switches ,EXTRACTION (Chemistry) ,WAVE analysis ,CAPACITANCE meters - Abstract
This paper presents two novel measurement methods to characterize silicon carbide (SiC) MOSFET devices. The resulting data are utilized to significantly improve the extraction of a custom device model that can now accurately reproduce device switching behavior. First, we consider the $I_{\text{d}}- V_{\text{ds}}$ output characteristics of power devices such as SiC transistors. These are typically measured using traditional curve tracers, but the characterization of the high-voltage and high-current (HVHC) region is very challenging because of device power compliance and self-heating. In this paper, we introduce a measurement technique that overcomes self-heating and derives the HVHC region from switching waveforms. The switching transient characteristics of devices are used to determine drain current $(I_{\text{d}})$ as a function of drain–source voltage $(V_{\text{ds}})$ in the HVHC range. Second, we consider another challenging characterization area: measurement of nonlinear capacitances when device is turned on. These capacitance characteristics of on-state devices are important for correcting disagreements between simulations and measurements in turn-off switching transient waveforms and cannot be measured using a conventional capacitance-voltage meter. We introduce S-parameter measurements as an effective method to obtain the capacitance characteristics of both off-state devices and on-state devices. These novel measurement techniques have been applied to the modeling of a SiC device. The extracted device model, a modified version of the popular Angelov−GaN high-electron-mobility transistor model, shows significant improvement in terms of the accuracy of switching waveforms of devices over a wide range of operating conditions. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
15. A Switched Capacitive Filter-Based Harmonic Elimination Technique by Generating a 30-Sided Voltage Space Vector Structure for IM Drive.
- Author
-
R, Rakesh, Ramachandran, Krishna Raj, Yadav, Apurv Kumar, Gopakumar, K., Umanand, Loganathan, and Matsuse, Kouki
- Subjects
VECTOR spaces ,SPACE frame structures ,INDUCTION machinery ,HARMONIC analysis (Mathematics) ,ELECTRIC potential ,TORQUE - Abstract
This paper proposes a novel polygonal voltage space vector structure (SVS) having 30 sides, for a star-connected induction motor drive. The SVS eliminates the presence of harmonics up to 25th order from motor phase voltage throughout the entire modulation range, providing a torque profile devoid of lower order pulsations. Linear modulation is extended till 99.63% of base speed without exceeding the motor phase voltage rating. Topology consists of a dc-link fed primary inverter and two equal low voltage modular capacitor fed secondary inverters. Here the harmonics generated by the primary inverter is canceled by the secondary inverter which acts as a switched capacitive filter. Detailed description of the SVS generation and timing calculations are provided in this paper. Effectiveness of the proposed scheme is validated using experimental results, inverter loss calculations, and harmonic analysis. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
16. An Electrical Transient Model of IGBT-Diode Switching Cell for Power Semiconductor Loss Estimation in Electromagnetic Transient Simulation.
- Author
-
Xu, Yanming, Ho, Carl Ngai Man, Ghosh, Avishek, and Muthumuni, Dharshana
- Subjects
POWER semiconductor switches ,INSULATED gate bipolar transistors ,SEMICONDUCTOR devices ,ELECTRIC current rectifiers - Abstract
An electrical transient model (ETM) of insulated-gate bipolar transistor (IGBT)-diode switching cell is developed by coupling a temperature-dependent IGBT model with power loss model. The nonlinear behavior of IGBT and the reverse recovery characteristic of the diode are considered in this model to simulate the transient switching waveforms. Based on the transient waveforms of ETM under various operating conditions, the power loss estimation method (PLEM) for IGBT is developed. In addition to traditional modeling techniques that only uses ideal switch, this paper uses the model to replicate the power loss behaviors of semiconductor devices in circuit simulation by looking up tables. The proposed ETM is simulated in PSCAD/EMTDC with nanosecond time step, whereas the overall system application can be simulated with conventional time step in range of microsecond. By this way, the model can promise reasonable accuracy as well as an acceptable fast solving speed. The proposed ETM and PLEM have been implemented in PSCAD/EMTDC simulator and validated by experimental results using a double pulse test bench and boost converter test platform. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
17. A Zero-Voltage-Switching, Physically Flexible Multilevel GaN DC–DC Converter.
- Author
-
Chou, Derek, Lei, Yutian, and Pilawa-Podgurski, Robert C. N.
- Subjects
ZERO voltage switching ,POWER density ,SYSTEM integration - Abstract
Improving the power density of a power converter has many benefits for systems integration. Aspects such as thermal management, weight, conformation to mounting locations, and the footprint of the converter all become critical factors as systems continue to scale down in size. The flying capacitor multilevel converter topology is of interest because it has characteristics which contribute to high power density. This paper presents a quasi-square-wave zero-voltage switching (ZVS) multilevel dc–dc converter. ZVS greatly reduces switching losses and enables high-frequency operation of the converter. A hardware prototype is implemented, built on a flexible polyimide substrate circuit board. Experimental results show a peak system efficiency above 98.1%, an effective switching frequency of up to 3 MHz, and a power output of 250 W. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
18. An Isolated Multilevel Quasi-Resonant Multiphase Single-Stage Topology for 380-V VRM Applications.
- Author
-
Rizzolatti, Roberto, Saggini, Stefano, Ursino, Mario, and Jia, Liang
- Subjects
DIGITAL modulation ,VOLTAGE regulators ,TOPOLOGY ,POWER resources ,ANALOG-to-digital converters - Abstract
In order to increase the efficiency of modern microprocessor power supplies used in data centers, 380-V dc power distribution systems have been attracting attention due to their high efficiency and high reliability. This paper presents an innovative single-stage approach for 380-V voltage regulator modules (VRMs) based on a quasi-resonant multilevel topology constant on-time operation. The proposed topology inherently integrates the multiphase approach, providing fast phase shedding and flat high-efficiency curves even at light-load conditions. This is a unique advantage, which is not possible to establish in the two-stage approach, which is very important in server architectures, and where high efficiency is required even at light-load conditions. This paper analyzes the circuit topology and proposes a control architecture for fast transient response, including current-sharing capabilities. The digital controller has been implemented in 0.16- $\mu$ m lithography together with a digital pulsewidth modulation with a 195-ps resolution and a 40-MS/s 7-bit analog-to-digital converter. Experimental results show an efficiency of 93% for a 120-A 380–1.8-V VRM power supply. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
19. Optimal Modulation for a Fifth-Order Dual-Active-Bridge Resonant Immittance DC–DC Converter.
- Author
-
Yaqoob, Muhammad, Loo, Ka-Hong, Chan, Yiu Pang, and Jatskevich, Juri
- Subjects
AC DC transformers ,MATHEMATICAL optimization ,BRIDGE circuits ,PHASE modulation ,ELECTRIC potential - Abstract
This paper proposes a fifth-order resonant immittance network based dual-active-bridge (DAB) converter and an optimal modulation method that will ensure high-efficiency operation of the converter under wide-range variations in voltage ratio and output power level. The proposed modulation method is based on the concept of total power loss minimization, where a loss model is developed and an optimization algorithm is formulated to compute the optimal set of internal and external phase shift parameters that will lead to the maximum efficiency for a given set of operating parameters including voltage ratio and output power level. It is found that to maintain high-efficiency operation under wide-range variations in voltage ratio and output power level, the DAB converter is required to switch between different operation modes and neither soft-switching operation nor unity-power-factor operation is able to achieve wide-range high efficiency performance when used alone. The importance of $reconfigurability$ of operation mode for achieving wide-range high efficiency performance is clearly illustrated in this paper. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
20. Fast Torque Control and Minimized Sector-Flux Droop for Constant Frequency Torque Controller Based DTC of Induction Machines.
- Author
-
Alsofyani, Ibrahim Mohd, Bak, Yeongsu, and Lee, Kyo-Beum
- Subjects
TORQUE control ,TORQUE ,MOTORCYCLES ,MACHINING ,INDUCTION machinery ,LOW voltage systems - Abstract
In this paper, two simple control methods are proposed for improving direct torque control (DTC) with a constant frequency torque controller (CFTC-DTC) in induction machines. The CFTC-DTC was initially introduced to reduce torque ripple and achieve constant switching frequency in inverters. However, when compared to the original DTC, the CFTC-DTC algorithm suffers from slow torque dynamic response owing to the selection of zero-voltage vectors during torque transient. In addition, when the motor operates at low speed, flux droop occurs at sector transitions, which leads to undesirable current distortions. The problem of flux droop occurs because of short-duty voltage cycles and small radial voltage components at low speeds. This paper has two main contributions—to eliminate zero-voltage vectors during torque dynamics in order to establish a fast torque response in the transient state, and to minimize the flux droop at the sector transitions by applying another triangular carrier and modifying the torque output in order to increase the duty voltage cycles at low motor speeds. A detailed analysis of the problems and proposed methods is presented. Experimental results are provided to validate the effectiveness of both proposed methods. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
21. A Viable Mission Profile Emulator for Power Modules in Modular Multilevel Converters.
- Author
-
Wang, Zhongxu, Wang, Huai, Zhang, Yi, and Blaabjerg, Frede
- Subjects
THERMAL stresses ,POWER semiconductors ,ACCELERATED life testing ,POWER resources ,OPTICAL fibers - Abstract
Various methods have been presented in the past to emulate the electrical behavior of modular multilevel converters (MMCs). To meet the demands for the reliability aspect study of MMCs, this paper proposes a viable setup to emulate the thermal behavior and to investigate its feasibility for reliability testing and thermal model validation of the power modules in the MMC. The proposed mission profile emulator has three distinctive features: 1) capable of emulating and measuring the thermal stresses of power modules; 2) capable of implementing practical switching profile as a full-scale MMC; and 3) having significantly reduced requirement for dc power supply compared to existing setups used for electrical studies. Theoretical discussions, and simulations as well as the experimental results are presented to demonstrate the capability of the mission profile emulator both electrically and thermally. Moreover, this paper is accompanied by a video demonstrating how to measure the junction temperature of the power devices using the optical fiber and the thermal camera. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
22. A DC–DC Transformerless High Voltage Gain Converter With Low Voltage Stresses on Switches and Diodes.
- Author
-
Saadatizadeh, Zahra, Heris, Pedram Chavoshipour, Sabahi, Mehran, and Babaei, Ebrahim
- Subjects
VOLTAGE-frequency converters ,LOW voltage systems ,DIODES ,CAPACITOR switching ,HIGH voltages ,AC DC transformers ,SEMICONDUCTOR diodes ,PSYCHOLOGICAL stress - Abstract
In this paper, a new dc–dc high voltage gain converter with low-voltage stresses on switches and diodes is proposed. Even though, in the topology of the proposed converter there are not any coupled inductors and transformer utilized, the voltage conversion ratio of the proposed converter is considerable in comparison to its conventional types. Also, two switches of the proposed converter provide longer charge time for two inductors which make the proposed converter capable of providing high voltage gain without preselecting extremely large duty cycles. In addition, the number of power circuit components of the proposed structure are few and the voltage stresses on semiconductor elements are low. In this paper, theoretical analysis of the proposed converter for each operating mode is presented and the voltage gain, voltage and average current stresses of elements, maximum input current ripple, efficiency and equations of critical inductances are calculated. Moreover, to verify the capability of the proposed converter, it is comprehensively compared with other similar recently presented high voltage gain boost converters. Finally, an approximately 12 V/380 V and 520-W prototype of the proposed converter is implemented in laboratory to demonstrate its practical performance, then, the experimental results reconfirm each other and theoretical analysis. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
23. Bi-Directional Grid-Connected Modular Multilevel Converters With Direct Digital Control and D-Σ Processes.
- Author
-
Wu, Tsai-Fu, Chou, Tzu-Chieh, Huang, Chun-Wei, and Sun, Kai
- Subjects
DIGITAL control systems ,TRACKING control systems ,IDEAL sources (Electric circuits) ,VOLTAGE control - Abstract
This paper presents bidirectional grid-connected modular multilevel converters (MMC) with direct digital control and division-summation processes to achieve power-injection and rectification functions. A direct digital control is developed to track current references, regulate dc-bus voltage and cell voltage, and balance the upper and lower dc-bus voltages. It can accommodate wide filter-inductance variation and take care of source voltage harmonics to achieve tight current tracking and low distortion output current. Based on the power-balance principle, the commands of arm currents can be determined directly. In this paper, the MMC configuration is introduced first, and then the control laws for current tracking and voltage regulation are derived in detail. Experimental and simulated results obtained from two 50 kW MMCs operated in power-injection and rectification modes have verified the analysis and discussion. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
24. A Novel Segmented Component Injection Scheme to Minimize the Oscillation of DC-Link Voltage Under Balanced and Unbalanced Conditions for Vienna Rectifier.
- Author
-
Ding, Wenlong, Qiu, Han, Duan, Bin, Xing, Xiangyang, Cui, Naxin, and Zhang, Chenghui
- Subjects
ELECTRIC current rectifiers ,OSCILLATIONS ,ELECTRIC potential ,BATTERY chargers ,PULSE width modulation - Abstract
This paper investigates a Vienna rectifier as a charger for series-connected battery packs. Focusing on carrier-based pulsewidth modulation (CBPWM), the ripple current flowing through the neutral point (NP) results in the voltage oscillation if the loads are resistive. To reduce the ripple of average NP current with mitigated distortion under balanced and unbalanced dc-link voltages conditions, a novel CBPWM with segmented component injection scheme (SCIS) is proposed in this paper. After dc component injection, continuous intervals for optimized component injection and clamping intervals for compensation component injection are identified. Optimized components are calculated originally based on unbalanced factor to make the average NP current zero-size in one switching period. Moreover, unique compensation components generate suitable NP current to shape the sinusoidal input currents according to the circuit analysis. In consequence, the SCIS not only keeps the input current with low-harmonic distortion, but also minimizes the oscillation of dc-link voltage under balanced and unbalanced conditions. In addition, the value of the NP current during the clamping intervals is analyzed under various operating conditions. The effectiveness and the performance of the proposed SCIS are verified by simulation and experiments. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
25. High-Voltage-Gain DC–DC Step-Up Converter With Bifold Dickson Voltage Multiplier Cells.
- Author
-
Alzahrani, Ahmad, Ferdowsi, Mehdi, and Shamsi, Pourya
- Subjects
VOLTAGE multipliers ,CAPACITOR switching ,SEMICONDUCTOR switches ,RENEWABLE energy sources ,ELECTRIC current rectifiers ,PASSIVE components ,SEMICONDUCTOR diodes - Abstract
This paper presents an interleaved boost converter with a bifold Dickson voltage multiplier suitable for interfacing low-voltage renewable energy sources to high-voltage distribution buses and other applications that require a high-voltage-gain conversion ratio. The proposed converter was constructed from two stages: an interleaved boost stage, which contains two inductors operated by two low-side active switches, and a voltage multiplier cell (VMC) stage, which mainly consists of diodes and capacitors to increase the overall voltage gain. The proposed converter offers a high-voltage-gain ratio with low voltage stress on the semiconductor switches as well as the passive components. This allows the selection of efficient and compact components. Moreover, the required inductance that ensures operation in the continuous conduction mode (CCM) is lower than the one in the conventional interleaved boost converter. The distinction of the proposed converter is that the inductors’ currents are equal, regardless of the number of VMCs. Equal sharing of interleaved boost-stage currents reduces the conduction loss in the active switches as well as the inductors and thus improves the overall efficiency, as the conduction power loss is a quadratic function. In this paper, the theory of operation and steady-state analysis of the proposed converter are illustrated and verified by simulation results. A $\text{200-W}$ hardware prototype was implemented to convert a $\text{20-V}$ input source to a $\text{400-V}$ dc load and validate both the theory and the simulation. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
26. General Closed-Form ZVS Analysis of Dual-Bridge Series Resonant DC–DC Converters.
- Author
-
Han, Weijian and Corradini, Luca
- Subjects
DC-to-DC converters ,ZERO voltage switching ,BRIDGES - Abstract
Switching behavior analysis is an indispensable step for evaluating the steady-state performance of a bidirectional dc–dc converter and a prerequisite for soft-switching modulation design. For dual-bridge series resonant dc–dc converters (DBSRCs), the commonly used fundamental harmonic approximation (FHA) does not usually provide predictions accurate enough for reliable analysis and design. This paper discloses the exact closed-form solution for the zero-voltage switching (ZVS) operation conditions of DBSRCs for the most general case, in which all modulation quantities—i.e., phase shift, duty cycles, and switching frequency—are included. The proposed approach relies on a geometrical analysis of the converter state-plane trajectory, and allows us to analytically predict the ZVS or hard-switching state of any switch and for any given converter operating point. By inherently capturing the effects of all tank harmonics, the model disclosed in this paper shows higher accuracy than the conventional FHA-based approach, and translates into a practical tool for ZVS prediction and optimization at the converter design stage. Based on the derived analytical results, switching behavior of DBSRCs with minimum rms current trajectory (MCT) modulation is investigated, and an effective design choice of resonant-to-switching frequency ratio is presented, which contributes to reduced switching losses and enhanced efficiency. Furthermore, a variable frequency modulation scheme is formulated, achieving ZVS operation of all transistors over a wide input/output voltage range and efficiency improvement versus MCT technique. The analysis and conclusions are validated via extensive experimental tests on a 700 W DBSRC prototype. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
27. Single-Phase Transformerless Photovoltaic Inverter With Suppressing Resonance in Improved H6.
- Author
-
Akpinar, Eyup, Balikci, Abdul, Durbaba, Enes, and Azizoglu, Buket Turan
- Subjects
PULSE width modulation transformers ,PHOTOVOLTAIC power generation ,RESONANCE ,BIPOLAR transistors ,CAPACITORS ,ELECTRIC potential ,ELECTRIC capacity - Abstract
In low-power applications of photovoltaic (PV) systems, the transformerless grid-connected inverters have been preferred to increase the efficiency and reduce the cost, size, and power losses when they are compared to the ones with the transformer. A transformerless single-phase inverter topology with a single dc-link capacitor for the grid-connected PV systems is proposed in this paper. The proposed inverter has been simulated by using a cooperation process of the MATLAB and SPICE package programs and it has been implemented for experimental verification. The proposed inverter reduces the high-frequency common-mode leakage current caused by parasitic capacitances of PV panels, whereas it is controlled with the unipolar sinusoidal pulsewidth modulation. Also, the results show that the common-mode voltage remains constant. The efficiency of the proposed inverter has been compared to that of the most common topologies having the dc-link decoupling during the zero voltage states. This paper is accompanied by a video file demonstrating the power loss distribution in the inverter. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
28. A Variable Off-Time Control Method for a Single-Phase DCM Microinverter.
- Author
-
Zhang, Zhen, Zhang, Junming, and Shao, Shuai
- Subjects
ELECTRIC inverters ,ELECTRIC conductivity ,ELECTRIC switchgear ,ELECTRIC currents ,ELECTRIC inductors - Abstract
This paper proposes a variable off-time control method for a single-phase microinverter operating in the discontinuous conduction mode (DCM) for efficiency improvement. First, the fixed off-time control method is analyzed. The concept is to fix the off-time of the active switch throughout a line cycle for all output powers and scale the on-time of the active switch to shape a sinusoidal output current. Then, based on the fixed off-time control method, a variable off-time control method is proposed to modulate the preset fixed off-time in order to decrease the switching frequency during ac line zero-crossings and light load conditions. Compared with existed fixed-frequency DCM control or boundary conduction mode control, the variable off-time control is more flexible to optimize the efficiency under different load conditions as the switching frequency range can be automatically adjusted according to the output power. The switching frequency is high at heavy loads to limit the maximum peak current and is low at light loads to increase the light load efficiency. In addition, a predictive on-time method is adopted to simplify inverter control and reduce hardware costs. The parameter design principle is detailed in this paper. A 300 W prototype is built to verify the performance of the proposed method. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
29. A Submodule Fault Ride-Through Strategy for Modular Multilevel Converters With Nearest Level Modulation.
- Author
-
Wang, Jun, Ma, Hao, and Bai, Zhihong
- Subjects
ELECTRIC current converters ,ELECTRIC fault location ,PULSE width modulation ,COMPUTATIONAL complexity ,REDUNDANCY in engineering - Abstract
The modular multilevel converter (MMC) with nearest level modulation (NLM) is widely used in the high voltage applications for low switching frequency and easy implementation. Existing literature has not provided a complete submodule (SM) fault ride-through scheme for MMC with NLM. In this paper, a strategy including fault detection, localization, redundancy, and recovery is proposed to ensure continuous operation of MMC under IGBT open-circuit faults conditions. It only requires a few hardware and software resources. The features of MMC and SMs with three types of failures are studied, respectively. Based on these, the fault detection method is proposed by using a simple hardware circuit, thus high computation complexity is avoided. Since current fault localization schemes are limited to MMC with carrier phase shifted pulse width modulation, this paper further proposes a strategy for MMC with NLM to locate the faulty SM and identify the fault type. After this, the fault redundancy and the proposed fault recovery method are applied to eliminate the fault and then exit the failure state. Therefore, the ability of SM fault ride-through can be realized. Analysis of failure characteristics are verified in simulation. Experimental results based on a single-phase MMC prototype with 11 SMs per arm are presented to demonstrate the validity of the proposed fault ride-through strategy. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
30. Torque Ripple Reduction of Predictive Torque Control for PMSM Drives With Parameter Mismatch.
- Author
-
Siami, Mohsen, Khaburi, Davood Arab, and Rodriguez, Jose
- Subjects
SYNCHRONOUS electric motors ,TORQUE control ,PERMANENT magnet motors ,PARAMETER estimation ,ALGORITHMS ,STATORS - Abstract
Predictive torque control (PTC) is based on the prediction of motor torque and stator flux for all possible voltage vectors of power converter. These predictions are derived from a mathematical model of the motor that depends on the motor parameters. But, these parameters may not match with their actual values. These parametric uncertainties lead to inaccurate predictions of torque and stator flux and affect the performance of the predictive algorithm. This paper presents a modified PTC for a permanent magnet synchronous motor to reduce the torque ripple at the presence of parametric uncertainty by improving the prediction accurateness. Simulation and experimental results are provided to show the effect of the proposed method. [ABSTRACT FROM PUBLISHER]
- Published
- 2017
- Full Text
- View/download PDF
31. Analysis and Implementation of Phase Synchronization Control Strategies for BCM Interleaved Flyback Microinverters.
- Author
-
Zhe Zhang, Min Chen, Wang Chen, Chen Jiang, and Zhaoming Qian
- Subjects
ELECTRONIC switch-mode DC-to-DC converters ,SYNCHRONIZATION ,MAGNETIC control ,ZERO voltage switching ,PHOTOVOLTAIC power systems - Abstract
A flyback converter that operates in the boundary conduction mode or discontinuous conduction mode has been widely used in microinverters. Placing two flyback converters in parallel and utilizing interleaving can extend the power range of microinverters. Interleaving phases between the two converters should be carefully regulated in order to reduce the switching current ripple. In this paper, two open-loop phase synchronization methods are put forward and compared for the interleaved flyback microinverters utilizing the master-slave control principle. The comparison result shows that stable phase regulation can be achieved if synchronization is triggered at the instant when the master converter's primary switch is turned OFF. However, the switching loss will be increased with the transformers' magnetizing inductances mismatch between the two interleaved converters. To solve this problem, a novel closed-loop interleaving phase synchronization control method is proposed in this paper to guarantee high efficiency and stable operation at the same time. Simulation platform together with a 200-W prototype have been built to verify the proposed control methods. These results demonstrate that the proposed closed-loop interleaving phase synchronization control method can achieve high efficiency while maintaining stable phase synchronization for the interleaved flyback microinverter. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
32. Common Model Predictive Control for Permanent-Magnet Synchronous Machine Drives Considering Single-Phase Open-Circuit Fault.
- Author
-
Wang, Wei, Zhang, Jinghao, and Cheng, Ming
- Subjects
PREDICTIVE control systems ,PERMANENT magnet motors ,ELECTRIC circuits ,ELECTRIC power ,ELECTRIC currents - Abstract
In addition to field-oriented control and direct torque control, the model predictive control (MPC) is another typical control method for permanent-magnet synchronous machine (PMSM) drives. In some critical applications, fault-tolerant controls are usually required. The faults of PMSM drives in this paper are limited as a single-phase open-circuit fault, which may be caused by open circuit or short circuit of one power switch. In the postfault operation, the neutral point of the PMSM is connected to a redundant leg. As is known, MPC is a model-based control method. Since the PMSM has different mathematical models in both normal and postfault operations, two different MPCs (MPC-I and MPC-II) should be, respectively, designed for both normal and postfault operations according to traditional thinking. However, it is first found in this paper that the faulty PMSM drive can be treated as an equivalent healthy PMSM drive, and MPC-I can be shared by both normal and postfault operations without any modification. The major contribution of this paper is to find this fact, and verify it with theoretical analysis and experimental validation. Obviously, this finding will simplify the whole control method of PMSM drives considering single-phase open-circuit fault. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
33. Accurate Modeling of the VHF Resonant Boost Converter Considering Multiple Parasitic Parameters.
- Author
-
Zeng, Libin, Chen, Yanfeng, Zhang, Bo, and Qiu, Dongyuan
- Subjects
NONLINEAR oscillators ,IDEAL sources (Electric circuits) ,ANALYTICAL solutions ,LOGIC circuits ,INTEGRATED circuits ,OSCILLATIONS - Abstract
In recent years, very high frequency (VHF) converter has attracted much attention. However, with rich parasitic parameters and complex resonance links, there are some great difficulties to the modeling of such systems. Taking the on-off controlled VHF resonant boost converter as an example, this paper presents an accurate modeling and analysis method that considers multiple parasitic parameters. First, the closed-loop VHF converter system is divided into a main network and a parasitic oscillation network. Then, based on the operation analysis, an equivalent circuit model characterized by a time-varying input voltage source and two variable duty-cycle controlled switches is proposed. It worth noting that both the time-varying input and the controlled switches take into account the influences of the parameters. Furthermore, the periodic approximate analytical solution of the output voltage in the on stage is obtained by using the equivalent small parameter method to the proposed circuit model. And then combining the solution of the parasitic oscillation network and on-off state switching conditions, the steady-state waveform of output voltage can be obtained quickly. Finally, a prototype with operating frequency of 21.44 MHz is built to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
34. Control Strategy of DC-Link Voltage for Single-Phase Back-to-Back Cascaded H-Bridge Inverter for MV Drive With Interfacing Transformer Having Tertiary Winding.
- Author
-
Yoo, Jeong-Mock, Jung, Hyun-Sam, and Sul, Seung-Ki
- Subjects
ELECTRIC potential ,VOLTAGE control ,CASCADE converters ,PULSE width modulation transformers ,MOTOR drives (Electric motors) ,VOLTAGE-frequency converters ,REFERENCE values ,COMPUTER simulation - Abstract
This paper describes a dc-link voltage control method of a single-phase back-to-back cascaded H-bridge inverter (SBCI) for a medium-voltage motor drive system. The main advantage of the SBCI topology over the conventional regenerative cascaded H-bridge topology with a three-phase active front-end (AFE) is a simple system structure, which is composed of an input transformer, a power cell, a current sensor, etc. However, the challenging points of the SBCI are larger voltage ripple in the dc-link capacitor and imbalance of dc-link voltages of each phase. The asymmetric dc-link voltage of each power cells could cause unstable operation such as over-modulation due to the lack of the dc-link voltage of a particular phase and result in over-voltage or under-voltage faults. In this paper, the control strategy of the dc-link voltage for the SBCI that uses the negative-sequence voltage of the converter is described. The proposed control method is verified with a computer simulation whose target is a 6.6-kV–1.25-MW medium-voltage drive system. Also, through the experimental setup with the prototype SBCI whose power rating is 16.2 kVA, the dc-link voltage of each AFE has been controlled within a 0.5% error of its reference value at the full load. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
35. Demonstrating the Scope of a Switched Supercapacitor Circuit for Energy Harvesting Powered Wireless Sensor Loads.
- Author
-
Newell, David and Duffy, Maeve
- Subjects
ENERGY harvesting ,SWITCHING circuits ,LINE drivers (Integrated circuits) ,ENERGY storage ,POWER resources - Abstract
This paper describes the design of a high-efficiency energy management system for low-power, low-voltage energy harvesting powered wireless sensor systems. With typical voltages of less than 1 V and power levels lower than 1 mW, there are significant challenges when applying energy harvesting sources to supply pulsed power levels of up to 120 mW at voltage levels of 1.8–4 V as required by wireless sensor loads. The proposed approach integrates energy storage elements within a voltage step-up circuit to produce a new high-efficiency energy management circuit that converts the energy produced by a low-power, low-voltage source into a series of high power pulses. An optimized switched supercapacitor energy buffer circuit including a self-powered control circuit is proposed. Efficiencies of up to 91% are shown for an indoor solar cell source with a power level of 0.5 mW, supplying an equivalent wireless sensor with pulsed power levels of 10–120 mW. This is significantly higher than 83% achieved for the dc–dc stage of the existing best solution under the same source conditions, but requires an additional conversion step to provide high power pulses. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
36. A Simple Approach to Enhance the Effectiveness of Passive Currents Balancing in an Interleaved Multiphase Bidirectional DC–DC Converter.
- Author
-
Yao, Zhigang and Lu, Shuai
- Subjects
DC-to-DC converters ,CONVERTERS (Electronics) ,ZERO voltage switching ,POWER density - Abstract
This paper studies the high power density bidirectional dc–dc converter with interleaving, soft-switching, and near critical conduction mode (near-CRM) operation. Systematic design and control methods are proposed to enhance the effectiveness of passive currents balancing between multiple interleaved phases without using individual phase current feedbacks. This paper first analyzes the zero voltage turn-on operation, including the turn-off energy diversion by the added snubber capacitor and the turn-off resonance models. Second, the intrinsic inverse co-relation between the phase current deviation and the resulting effective duty cycles variation is quantitatively formulated and modeled as a closed-loop mechanism that balances the currents passively. Then, the design constraints of the system parameters including the snubber capacitance, dead time, and valley currents of the near-CRM mode are formulated to guarantee the effectiveness of counteracting the current unbalance. Finally, a variable switching frequency control is proposed to actively control the valley current and maintain the current balancing effectiveness throughout the operating range. An IGBT-based 20-kW three-phase interleaved prototype with the maximum efficiency of 99.1% is constructed to verify the proposed design and control methods. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
37. Observer and Lyapunov-Based Control for Switching Power Converters With LC Input Filter.
- Author
-
Gavagsaz-Ghoachani, Roghayeh, Phattanasak, Matheepot, Martin, Jean-Philippe, Nahid-Mobarakeh, Babak, Pierfederici, Serge, and Riedinger, Pierre
- Subjects
DC-to-DC converters ,LYAPUNOV stability ,LYAPUNOV functions ,IDEAL sources (Electric circuits) ,FILTERS & filtration ,VOLTAGE control - Abstract
This paper proposes a control method for a switching power converter. This converter is connected to a dc-link of a dc microgrid system via an LC input filter. This control method is based on a Lyapunov stability analysis; all state variables are acquired for evaluating stability analysis, including the output current for calculating the load resistance. To reduce a number of sensor counts, the input current is estimated. Moreover, loss occurrence in the converter is observed to reduce static errors of the controlled state variables, especially the output voltage. The losses are modeled as a series input voltage source observed from the dc–dc converter and a parallel current source. The latter enables us to eliminate the output current sensor. Using information from the estimated current source, a load resistance can be calculated. A Lyapunov function candidate is chosen to ensure that the system, including the observer, operates in a stable manner. Based on evaluating the time-derivative of the chosen Lyapunov function, we obtain the switching command that makes the system operate stably in each sampling cycle. In this paper, the proposed technique is applied to a boost converter. The simulation and as well experimental results validate the proposed control. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
38. Stability Issue of Cascaded Systems With Consideration of Switching Ripple Interaction.
- Author
-
Li, Xin, Ruan, Xinbo, Xiong, Xiaoling, Jin, Qian, and Tse, Chi K.
- Subjects
PULSE width modulation transformers ,ADAPTIVE modulation - Abstract
Impedance-based criteria are often used for assessing the stability of cascaded converter systems. In this paper, it is pointed out that the switching ripple interaction (SRI) between the source converter and the load converter in a cascaded system would change the gain of the pulsewidth modulation of the source converter, causing the cut-off frequency and the phase margin of the source converter to change accordingly. Thus, even if a cascaded system is shown to be stable under an impedance-based criterion, it can, in fact, be unstable due to the SRI. This paper proposes an adaptive modulation sample-and-hold method for eliminating the effect of the SRI. A 48 V–12 V–5 V cascaded system consisting of two buck converters is tested for verification. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
39. Hybrid Modulation Scheme for Switching Loss Reduction in a Modular Multilevel High-Voltage Direct Current Converter.
- Author
-
Kim, Seok-Min, Jeong, Min-Gyo, Kim, Juyong, and Lee, Kyo-Beum
- Subjects
CASCADE converters ,HIGH-voltage direct current converters - Abstract
A modular multilevel converter (MMC) is regarded as a promising topology in high-voltage direct current systems. However, the MMC consists of numerous submodules (SMs) and switching devices, which lead to a considerable switching loss, and increased cost and size of the heat sink. To mitigate these issues, this paper presents a novel modulation method composed of fundamental frequency modulation (FFM) and multicarrier-based sinusoidal pulsewidth modulation schemes. The main purpose of this modulation method is the reduction of switching loss while maintaining good harmonic performance. However, the FFM scheme leads to the unbalanced capacitor voltage of each SM in the MMC. Accordingly, this paper additionally proposes the rotation method and selective voltage balancing control for SMs to ensure effective performance of the method. Simulation and experimental results verify the effectiveness and performance of the proposed modulation scheme through switching loss and spectral analyses. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
40. Investigation on Extending the DC Bus Utilization of a Single-Source Five-Level Inverter With Single Capacitor-Fed H-Bridge Per Phase.
- Author
-
Davis, Teenu Techela and Dey, Anubrata
- Subjects
DIRECT currents ,ELECTRIC inverters ,CAPACITORS ,TOPOLOGY ,ELECTRIC switchgear - Abstract
Enhancement of dc bus voltage utilization for a five-level inverter with single dc source and capacitor-fed H-bridge (CHB) units is investigated in this paper. A carrier-based modulation technique is used for boosting the dc bus utilization, which is established by providing detailed mathematical analysis. The five-level inverter used here is realized by cascading a CHB unit to each phase of a three-level neutral point clamped inverter. The increase in dc bus voltage utilization owes to the pole voltage redundancies offered by CHB units. The floating capacitors of H-bridge units are balanced within a quarter fundamental cycle using the switching state redundancies of pole voltage levels. The aforementioned modulation technique allows the inverter to enhance the dc bus utilization from 0.577 $\text{V}_{\text{dc}}$ to 0.63 $\text{V}_{\text{dc}}$ under unity power factor. This enhancement is obtained in the linear modulation range without increasing the dc bus voltage, and thus, the inverter can operate without the presence of low-order harmonics in its phase voltages. The strength of this paper lies in its detailed mathematical analysis for finding out the limiting modulation index and power factor condition in the light of floating capacitor voltage balancing issue. Simulation as well as experimental verification of the modulation scheme is carried out on an induction motor drive under various operating conditions. It is shown that this carrier-based modulation technique is suitable for any single source inverter topology with one CHB unit per phase. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
41. A New Single DC Source Six-Level Flying Capacitor Based Converter With Wide Operating Range.
- Author
-
Ebrahimi, Javad and Karshenas, Hamidreza
- Subjects
DIRECT currents ,CONVERTERS (Electronics) ,CAPACITORS ,ELECTRIC power factor ,HYBRID systems - Abstract
This paper presents a new six-level flying capacitor based (FC-based) multilevel converter with one dc source and the capability of operating in all power factors and modulation indexes. Multilevel converters with one dc voltage source are attractive in many applications as they do not need rather expensive and bulky multiwinding input transformer connection at the dc side. On the other hand, not all classic multilevel converters with one dc source can produce any desirable number of output voltage levels at all power factors and/or modulation indexes. In this paper, a hybrid structure is proposed in which six voltage levels can be realized at the ac terminals. The modulation technique and the control strategy for the FC voltage balancing are presented. To show the advantages of the proposed converter, different performance criteria, such as switch count and rating, the size of capacitors, switching frequency, and power losses, are compared with other existing six-level topologies. The results indicate that the proposed structure is superior to other six-level converters from different standpoints. Simulation results are used to further evaluate the performance of the proposed converter. A laboratory-type experimental setup is used to validate the theoretical results. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
42. LCLC Converter With Optimal Capacitor Utilization for Hold-Up Mode Operation.
- Author
-
Chen, Yang, Wang, Hongliang, Hu, Zhiyuan, Liu, Yan-Fei, Liu, Xiaodong, Afsharian, Jahangir, and Yang, Zhihua
- Subjects
CASCADE converters ,HIGH voltages ,ELECTRIC inductors ,MAGNETIZATION ,SWITCHING circuits - Abstract
In data center and telecommunication power supplies, the front-end dc–dc stage is required to operate with a wide input voltage range to provide hold-up time when ac input fails. Conventional LLC converter serving as the dc–dc stage is not suitable for this requirement, as the normal operation efficiency (at 400 V input) will be penalized once the converter is designed to achieve high peak gain (wide input voltage range). This paper examined the operation of the LCLC converter and revealed that the LCLC converter could be essentially equivalent to a set of LLC converters with different magnetizing inductors that are automatically adjusted for different input voltages. In nominal 400 V input operation, the LCLC converter behaves like an LLC converter with large magnetizing inductor, thus the resonant current is small. In the hold-up period, when the input voltage reduces, the equivalent magnetizing inductor will reduce together with switching frequency reducing, thus the converter achieves high peak gain. In this paper, a new design methodology is also proposed to achieve optimal utilization of the two resonant capacitors for high power application. To verify the effectiveness of the LCLC converter for hold-up operation, comprehensive analysis has been conducted; a detailed step by step design example based on capacitor voltage stress is introduced; an experimental LCLC prototype optimized at 400 V, with input voltage range of 250–400 V and 12 V/500 W as output has been presented. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
43. A Reduced Switch Hybrid Multilevel Unidirectional Rectifier.
- Author
-
Mukherjee, Debranjan and Kastha, Debaprasad
- Subjects
HYBRID systems ,PULSE width modulation transformers ,TELECOMMUNICATION ,ENERGY conversion ,PHASE transitions - Abstract
Nonregenerative pulsewidth-modulated (PWM) rectifiers are increasingly being considered for applications, where the power flow is unidirectional, such as power supplies for telecommunications, X-ray, the machine-side converter for wind energy conversion systems, etc. They use fewer active switches, which increase their power density and reduce cost. This paper proposes a novel reduced switch topology for a multilevel (five-level or higher) nonregenerative PWM rectifier. It uses only four controlled switches and eight diodes per phase for a five-level rectifier. Half of the diodes are naturally commutated (zero current switching) at the line frequency, which reduces switching losses. This topology has several other advantages compared to similar topologies reported in the literature, such as minimum voltage stress across the devices, elimination of transient voltage-balancing snubbers, no extra hardware for balancing the flying capacitors, the dc-link mid-point voltage, etc. In this paper, switching cycle average modeling and the carrier-based modulation strategy for this rectifier are also presented to maintain a balanced dc link and to regulate flying capacitor voltages, while achieving unity displacement factor at the rectifier input terminals. The overall performance of the rectifier is verified by experimental results. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
44. Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules.
- Author
-
Zhang, Lei, Yuan, Xibo, Wu, Xiaojie, Shi, Congcong, Zhang, Jiahang, and Zhang, Yonglei
- Subjects
METAL oxide semiconductor field-effect transistors ,SILICON carbide ,INSULATED gate bipolar transistors ,ELECTRIC current converters ,PULSE width modulation transformers - Abstract
The higher voltage blocking capability and faster switching speed of silicon-carbide (SiC) mosfets have the potential to replace Si insulated gate bipolar transistors (IGBTs) in medium-/low-voltage and high-power applications. In this paper, a state-of-the-art commercially available 325 A, 1700 V SiC mosfet module has been fully characterized under various load currents, bus voltages, and gate resistors to reveal their switching capability. Meanwhile, Si IGBT modules with similar power ratings are also tested under the same conditions. From the test results, several interesting points have been obtained: different to the Si IGBT module, the over-shoot current of the SiC mosfet module increases linearly with the increase of the load current and it has been explained by a model of the over-shoot current proposed in this paper; the induced negative gate voltage due to the complementary device turn-off (crosstalk effect) is more harmful to the SiC mosfet module than the induced positive gate voltage during turn-on when the gate off-voltage is –6 V; the maximum dv/dt and di/dt (electromagnetic interference) during switching transients of the SiC mosfet module are close to those of the Si IGBT module when the gate resistance is larger than 8 Ω but the switching loss of the SiC mosfet module is much smaller; the switching losses of the Si IGBT module are greater than those of the SiC mosfet module even when the gate resistance of the former is reduced to zero. An accurate power loss model, which is suitable for a three-phase two-level converter based on SiC mosfet modules considering the power loss of the parasitic capacitance, has been presented and verified in this paper. From the model, a 96.2% efficiency can be achieved at the switching frequency of 80 kHz and the power of 100 kW. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
45. A Unidirectional Single-Stage Three-Phase Soft-Switched Isolated DC–AC Converter.
- Author
-
Pal, Anirban and Basu, Kaushik
- Subjects
DC-AC converters ,PULSE width modulation transformers ,SINE waves ,HIGH frequency transformers ,ZERO voltage switching ,ELECTRIC leakage - Abstract
This paper presents a novel single-stage soft-switched high-frequency-link three-phase dc–ac converter topology. The topology supports unidirectional dc to ac power flow and is targeted for applications like grid integration of photovoltaic sources, fuel cell, etc. The high frequency magnetic isolation results in reduction of system volume, weight, and cost. Sine-wave pulsewidth modulation is implemented in dc-side converter. Though high-frequency switched, dc-side converter is soft switched for most part of the line cycle. The ac-side converter active switches are line frequency switched incurring negligible switching loss. The line frequency switching of ac-side converter facilitates use of high voltage blocking inherently slow semiconductor devices to generate high voltage ac output. In addition, a cascaded multilevel structure is presented in this paper for direct medium-voltage ac grid integration. A detailed circuit analysis considering nonidealities like transformer leakage and switch capacitances, is presented in this paper. A 6-kW three-phase laboratory prototype is built. The presented simulation and experimental results verify the operation of the proposed topologies. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
46. Gate Control Optimization of Si/SiC Hybrid Switch for Junction Temperature Balance and Power Loss Reduction.
- Author
-
Wang, Jun, Li, Zongjian, Jiang, Xi, Zeng, Cheng, and Shen, Z. John
- Subjects
METAL oxide semiconductor field-effect transistors ,ELECTRIC potential ,ZERO voltage switching ,THERMAL conductivity ,ELECTRIC fields - Abstract
The hybrid switch concept of paralleling a higher-current main Si IGBT and a lower-current auxiliary SiC mosfet offers an improved cost/performance tradeoff in power converters. Currently, the gate control strategy of these two internal devices emphasizes on minimizing the total power loss, and is referred to as the efficiency control mode in this paper. However, there is a serious risk of overheating and reliability degradation of the SiC mosfet if solely relying on this control strategy. In this paper, we propose a new method of gate control optimization, referred to as the thermal balance control mode, to keep the junction temperature of both devices within the specified temperature range, and to minimize the total power loss simultaneously. We first investigate the dependency of the hybrid switch switching losses on the gate control pattern both theoretically and experimentally. We then extensively study control optimization in these two distinct control modes in a dc–dc boost converter. It is found that the thermal balance control mode can achieve almost the same total power loss as the efficiency control mode, but much lower and more balanced junction temperatures of the two internal devices. Experimental results demonstrate that the Si/SiC hybrid switch in an optimal thermal balance control mode can achieve a 163% higher power handling capability in the 20-kHz boost converter or four times higher switching frequency in the 4-kW boost converter than a single IGBT solution with hard switching condition, and yet a considerably lower component cost than a single SiC mosfet solution in the boost converter. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
47. An Online Monitoring Method of Circuit Parameters for Variable On-Time Control in CRM Boost PFC Converters.
- Author
-
Ren, Xiaoyong, Wu, Yu, Guo, Zhehui, Zhang, Zhiliang, and Chen, Qianhong
- Subjects
ONLINE monitoring systems ,ZERO voltage switching ,ELECTRIC power factor ,HARMONIC distortion (Physics) ,DIGITAL control systems - Abstract
This paper proposes an improved zero current detection for critical conduction mode (CRM) control, which can compensate the input current distortion caused by the signal propagation delay and the existence of the negative resonance current. A unified variable on-time calculation method is also proposed to unify the formulas under the zero-voltage-switching condition and the valley-switching condition. Since these two methods are dependent on the boost inductance and device junction capacitance, which may be different from the nominal values, effort is needed to compensate the deviation on these two parameters. In this paper, an online monitoring method is proposed to compensate the numerical deviation. The proposed method only needs to sense the input voltage, output voltage, and the reverse flow time of the inductor current, leading to a high power quality in the entire input and load conditions. The experimental results of the proposed methods are demonstrated on a 200-W GaN-based CRM boost power factor correction prototype. With the proposed methods, the input current total harmonic distortion is only 0.78% at 110 VAC input with full load and 2.1% at 220 VAC input with full load. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
48. Inner Supply Data Transmission in Quasi-Resonant Flyback Converters for Li-Ion Battery Applications Using Multiplexing Mode.
- Author
-
Min, Geon-Hong and Ha, Jung-Ik
- Subjects
MULTIPLEXING ,DATA transmission systems ,LITHIUM-ion batteries ,BATTERY chargers ,ELECTRIC potential ,CONVERTERS (Electronics) - Abstract
This paper proposes data transmission method between primary and secondary of the flyback converter without additional communication circuit while simultaneously transferring power. In some application such as a battery charger, the data exchanges between the primary and secondary sides are necessary. In the conventional system, an additional line or wireless communication modules is used for data exchanges, thereby increasing the system and connector size. The proposed system, in comparison, does not use additional signal transceiver but instead exchanges data by simply alternating operation mode of the flyback converter, thus adding communication function while not increasing the volume of the terminal and overall system. The waveform of transformer voltage is used to count the number of resonant pulses, which is used for decoding and encoding the data packet. Bidirectional communication between primary and secondary sides is possible while power is transferred to the output using an appropriate communication protocol. This paper proposes data transmission method for both single output and the multioutput cases. Also, both half-duplex and full-duplex communication using the proposed method is explained. The experimental results are presented to verify the performance of the proposed communication method. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
49. A Soft-Switching Step-Down PFC Converter With Output Voltage Doubler and High Power Factor.
- Author
-
Hosseinabadi, Farzad and Adib, Ehsan
- Subjects
CONVERTERS (Electronics) ,ELECTRIC potential ,ELECTRIC power factor ,SEMICONDUCTOR devices ,HARMONIC distortion (Physics) - Abstract
In this paper, a new soft-switching bridgeless single-phase power factor correction (PFC) converter is presented and analyzed. Employing an auxiliary switch, the input current dead angle that is the main drawback of the existing buck-type PFCs is omitted, and thus, the power factor (PF) is improved, which is the main contribution of the paper. Proposed PFC converter operates under discontinuous conduction mode (DCM) and draws sinusoidal input current from power supply inherently. All switches and diodes are turnedonandoffunder soft switching, which leads to low switching losses and elimination of diode reverse recovery problems. Also, minimum numbers of semiconductor devices are in the power flow path that reduce the conduction losses. A 120-W laboratory prototype is implemented and experimental results verify the validity of theoretical analysis and show efficiency of 92.1%. In addition, total harmonic distortion (THD) of 3.3% is achieved and the input current harmonics complies with IEC61000-3-2 Class D requirements. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
50. Study on a High Voltage Gain SEPIC-Based DC–DC Converter With Continuous Input Current for Sustainable Energy Applications.
- Author
-
Ardi, Hossein and Ajami, Ali
- Subjects
ELECTRIC potential ,CONVERTERS (Electronics) ,DIRECT currents ,RENEWABLE energy sources ,ELECTRIC circuits ,ELECTRIC inductors - Abstract
A high step-up dc–dc converter is proposed in this paper. The presented converter benefits from some advantages such as high voltage gain and continuous input current, which makes it suitable for the renewable energy applications. The presented converter is based on the SEPIC converter. However, the converter voltage gain is improved by employing a coupled inductor and two voltage multipliers. A passive clamp circuit is also added to the proposed converter that increases the voltage gain and reduces the voltage stress on the main switch. Thus, a switch with low $R_{{\text{DS(on)}}}$ will be needed that decreases the conduction loss. Besides, the voltage stress on the output diode in the proposed converter is reduced, which alleviates reverse recovery problem. The steady-state analysis of the proposed converter is discussed in this paper. The analysis is verified with experimental results under the output power of 245 W. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.