Search

Titanium-oxo clusters (TOCs) have been studied for applications in catalysis, energy storage and transfer, light emission, and so on; however, use of TOCs for the selective adsorption of dyes has not yet been reported. Herein, a TOC compound formulated as [Ti

Despite the numerous titanium-oxo clusters (TOCs) which have been reported, the nature of small clusters (nuclearity < 10) as model compounds showed large deviation from that of nanoscale TiO materials. Therefore, theoretical and experimental studies for large TOCs merit more attention. We recently prepared and crystallographically characterized a series of large TOCs: Ti11O15(OiPr)16(Cophen) (1), Ti11O15(OiPr)16(Mnphen) (2), Ti10O14(OEt)16(Mnphen)2 (3), and Ti10O14(OEt)16(Mnphphen)2 (4) (phen = 1,10-phenanthroline, phphen = 4,7-biphenyl-phen). These compounds are derivatives of a Ti12 parent cluster by replacing one or two of the five-coordinated titanium atoms of the Ti12 cluster with a transition metal M, Co(II) and Mn(II), that is chelated by a phen group. The effects of mono- and bis-substituted Mphen on the charge and structure of the clusters are discussed. Theoretical evaluation of the frontier orbitals of the clusters is carried out on the basis of the precisely defined crystal structures. Different from the dye molecule to TiO core charge transfer for the dye-modified TOCs, charge transfer in these clusters is from TiO/TiOM to phen/Mphen. The effects of different metal ions and the number of substituted Mphen moieties on the photocurrent properties are evaluated. The results will be of interest to research on cluster chemistry, especially on the TOC chemistry.

Organic-inorganic hybrid metal-polyphenols as stable structural modules have gained extensive interest due to their diverse applications. However, titanium-oxo compounds (TOCs) with large molecular polyphenols have been less explored, and they were expected to be different from small polyphenols with isolated metal ions. Herein, 4-methyl-esculetin (Mesc), a catechol derivative, was selected to construct three TOCs, namely, [Ti

Titanium oxides and bismuth halides or oxyhalides have been known to be excellent semiconductors with both excellent photocatalytic and photoelectric properties. The design of supersalts assembled by titanium-oxo clusters (TOCs) and bismuth iodide clusters is a hopeful strategy for exploring the chemistry and application of new titanium-oxo clusters. We report herein a series of unusual ionic TOCs with Ti12 oxo cluster cations and bismuth iodide anions, [Ti12O15(OiPr)17]3[Bi3I12] (Bi3), [Ti12O14(OiPr)18][Bi4I14(THF)2] (Bi4), and [Ti12O14(OiPr)18][Ti11BiO14(OiPr)17][Bi6I22] (Bi6). Single-crystal X-ray analysis revealed that the type and charge of the Ti12 clusters varied with the charges of different bismuth iodide clusters. Taking advantage of the easy hydrolysis of the TOCs and BiI clusters in water, we used these supersalt crystals as single-source precursors to prepare a p-n-type BiOI-TiO photocatalyst. The heterojunction materials were carefully characterized by powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, etc. The synergistic effect of the two components of BiOI and TiO on the photocatalytic degradation of RhB in water is demonstrated. This is a very convenient method for obtaining a p-n-type BiOI-TiO heterojuction photocatalyst by just placing the ground TOC crystals into water.

Two dimensional (2D) hybrid perovskites have attracted a great deal of interest because of their appropriate photovoltaic efficiency and environmental stability. Although some 2D hybrid perovskites with sulfur-containing amines have been reported, the cation having the mercaptan group has not been well explored yet. In this work, cysteamine (Cya, HS(CH2)2NH2), a mercaptan-containing amine, was introduced into 2D hybrid perovskite. Two 2D lead iodides with different structures, (HCya)2PbI4 (1) and (HCya)7Pb4I15 (2), were isolated as a red low-temperature phase and a yellow high-temperature phase, respectively. X-ray single-crystal structural analysis showed that the red phase 1 is a single layered corner-shared perovskite and that the yellow phase 2 is a corner/edge-shared quasi-2D perovskite. A thermo-induced reversible 1 to 2 phase transition was found in this synthetic system. The configuration of HCya cation greatly influences the crystallization equilibrium, generating different structures of the lead halides. The single-crystal structure of 1 is discussed in comparison with that of (HAE)2PbI4 (AE = HO(CH2)2NH2), an analogue of 1. The different effects of OH and SH groups on the 2D frameworks are studied based on their hydrogen bonding properties. More remarkably, although the two perovskites have similar structures, the (HCya)2PbI4 (1) has an intrinsic water stability that is much more stable than (HAE)2PbI4, which should be attributed to the affinity of the SH group with lead on the surface of the lead halide.

A novel cationic metal-organic framework composed of {Cu2(COO)4} paddle-wheel units and a tetracarboxylic viologen derivative, namely, {[Cu2(bdcbp)(H2O)2]·2NO3·2H2O}n (Cu-CMOF, H4bdcbpCl2 = 1,1'-bis(3,5-dicarboxyphenyl)-4,4'-bipyridinium dichloride), has been successfully synthesized and structurally characterized. In Cu-CMOF, the {Cu2(COO)4} unit and viologen derivative both act as four-connected nodes forming an ssb-type cationic network with 42.84 topology, in which the positive charges are distributed on the organic viologen moieties. Deeper insight of the structure indicates that the 3D architecture of Cu-CMOF can be seen as packing of a 26-faceted polyhedral cage and two cuboid cages. Notably, Cu-CMOF displays a highly efficient anion exchange ability for capture and removal of anionic pollutants. UV-vis absorption spectra and digital images demonstrate that Cu-CMOF is capable of adsorbing the dichromate anion and anionic dyes effectively, such as methyl orange (MO-), Congo red (CR2-), and New Coccine (NC3-). Meaningfully, anionic dyes (MO-, CR2-, and NC3-) can be efficiently and selectively removed by Cu-CMOF in the presence of cationic dye methylene blue (MLB+). Such behaviors of anionic pollutant adsorption and dye separation are mainly caused by an ion-exchange process facilitated by the large cavity and decentralized distribution of positive charge in Cu-CMOF.

Hybrid halide perovskites featuring as new materials of high-performance solar cells have attracted great research interest. The temperature-dependent dimensional transition of halide perovskites is a crucial handle in the preparation of perovskite films. Only the small cations of methylammonium (MA) or formamidinium (FA) have been involved for most of the dimensional transition materials. In this work, thiourea (tu) is introduced into hybrid halide materials. A new series of 1D ribbonlike hybrid lead iodides with tu and MA cations are reported that were crystallographically characterized as MAn(Htu)n+1PbnI4n+1 (n = 1-4 denoted as 1-4, respectively; in 1, MA is replaced by tu). The width of the perovskite ribbon increases from one PbI6 octahedron to four corner-fused octahedra. Compounds 2 and 3 can be turned into a black 3D perovskite after annealing. This is an unusual mixed MA-tu hybrid halide perovskite system, in which the tu molecule plays an important role in manipulating the dimensions and their photoconductive properties. Scanning electron microscopy of the blackened sample shows that there are a lot of regular vent holes on the smooth crystal surface with sizes of hundreds of nanometers. The tunable structures and porous crystals might be advantageous in the sense of material modulation.

Incorporation of Eu complexes into various organic or inorganic matrixes is one of the acceptable strategies to obtain displaying materials having practical applications. In this work, we report a convenient approach to preparing high luminescent organic-inorganic hybrid materials and films from the europium-titanium oxo-clusters (EuTOCs) having photoactive antenna ligands. Three Eu2Ti4 oxo-clusters were synthesized and crystallographically characterized. They are the first reported lanthanide-TOCs coordinated with 1,10-phenanthroline (phen) and 2,2'-bipyridine (bpy) as photoactive ligands, Eu2Ti4O6(phen)2(pa)10 (1) (pa = propionate), Eu2Ti4O6(bpy)2(pa)10 (2), and Eu2Ti4O6(phen)2(MA)10 (3) (MA = methacrylate). Benefitting from the photoactive antenna ligands and the rigid cluster structures, these clusters showed bright red luminescence with quantum yield in the range of 60-80% and long lifetime up to 3.0 ms. Unlike those physically mixed polymeric materials, the MA coordinated compound 3 can be self-polymerized to form a brilliant luminescent film. The film coated slide was used to develop a fluorescence sensor for biomolecule ascorbic acid (AA). The low detection limit and reusable properties suggest great potential for such EuTOC films in real applications.

Understanding the effect of charge transfer on the physical properties of metal-organic frameworks (MOFs) is essential for designing multifunctional MOF materials. In this work, three redox-active tetrathiafulvalene (TTF)-based MOFs, formulated as [Co6L6(bpe)6(EtOH)2(MeOH)2(H2O)]n·5nH2O (1), [Co5(μ3-OH)2L4(bpe)2]n (2), and [CoL(bpa)(H2O)]n·2nH2O (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate, bpe = 1,2-bis(4-pyridyl)ethene, bpa = 1,2-bis(4-pyridyl)ethane), are crystallographically characterized. Complexes 1 and 3 are two-dimensional (2D) coordination polymers, and 2 features an unusual three-dimensional (3D) MOF. The structure of 2 contains a cluster chain constructed from μ2-O bridged pentanuclear cluster subunits, which is first found for 3D MOFs. Complexes 1 and 2 are comprised of the same ligands L and bpe but with different multidimensional configuration, and complexes 1 and 3 have the same 2D layered structures with the same ligand L but with different conjugation ligand bpe/bpa, which provide a good comparison for the structure-property relationship. The charge-transfer (CT) interactions within MOF 1 are stronger than those of 2 due to the closer packing of electron donor (D) L and electron acceptor (A) bpe in 1, and no CT occurs within MOF 3 because of the unconjugated bpa. The order of photocurrent density is 1 > 2 ≫ 3, which is in accordance with that of CT interactions. Further analysis reveals that the CT interactions within the MOF are not beneficial for the supercapacitance which is verified by the highest supercapacitance performance of 3. This work is the first study of the structures and CT effects on the supercapacitance performance.

Titanium-oxo clusters (TOCs) are attractive as a rapidly growing class of molecular materials due to their use as molecular models and precursors of nano-titanium-oxide. However, most TOCs can only be dissolved in nonaqueous solvents, which largely limits their potential applications in biological or environmental situations. Very few water-soluble TOCs were reported, which can be used directly in aqueous biomedical systems. However, until now, no research studies of such TOCs involved in biomedical fields have been documented. We report here a series of lanthanide-titanium-oxo clusters (LnTOCs) formulated as {H2@[Ln2Ti8(μ3-O)8(μ2-O)4(Ac)16]}3·24CH3CN·23H2O (Ln = Eu(III) 1, Tb(III) 2, and Yb(III) 3). The compounds are easily soluble in water and form a stable solution of the cluster aggregates (LnTOC-a). Therefore, nano-biocompatible TiO materals can be prepared from these LnTOCs just by dissolving them in water. The nanoscale aggregates in water solutions were characterized by SEI-MS, 1H NMR, XPS, IR, and EDS mapping. Using the EuTOC-a solution, excellent fluorescence sensor properties for biomolecule ascorbic acid were found. Furthermore, biocompatibility and fluorescent labeling properties of the EuTOC-a for HeLa cells were evaluated. The results indicated that water-soluble LnTOCs can be used to prepare biocompatible fluorescent Ln-Ti-O nanomaterials.

Although pristine metal-organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active CoII ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co2(py-TTF-py)2(BDC)2]·2DMF·H2O (TTF-Co-MOF 1) and [Co2(py-TTF-py)2(BPDC)2]·3DMF·3H2O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4'-pyridyl)tetrathiafulvalene, H2BDC = terephthalic acid, H2BPDC = biphenyl-4,4'-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g-1 at 200 mA g-1 after 287 cycles. The rate capability is greatly enhanced by the introduction of CoII into TTF-based MOFs with specific capacities of 1028.6 mAh g-1 at 5 A g-1 and 966.5 mAh g-1 at 10 A g-1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the CoII metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the CoII metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.

Despite the numerous titanium-oxo clusters (TOCs) which have been reported, the nature of small clusters (nuclearity10) as model compounds showed large deviation from that of nanoscale TiO materials. Therefore, theoretical and experimental studies for large TOCs merit more attention. We recently prepared and crystallographically characterized a series of large TOCs: Ti

Model studies on dye sensitized titanium oxides have attracted wide interest with respect to their importance in understanding photoelectric and photophysical processes. Ligand modified titanium oxo clusters (TOCs) have been considered as the most appropriate models for dye sensitized solar cells (DSSCs) on the basis of their atomically precise structures. However, the ligands used previously in TOC models were seldom the dyes that really applied in DSSCs due to the difficulty with which the crystals of the dye anchored TOCs are obtained. We report herein a series of TOCs with the popularly used arylamine-cyanoacrylate dyes. As the closest model of DSSCs, the TOCs were studied by DFT calculations based on their accurate structural information. They have also been applied to photoelectric conversion evaluation by a solar cell device. Both the theoretical and application results showed that the synergistic effect of intradye molecular charge transfer (ICT) and dye to TiO cluster charge transfer (LMCT) is important in increasing the power conversion efficiency.

Titanium oxo clusters (TOCs) have become one of the worldwide hot research topics because they are excellent molecular TiO materials having unique photoactive properties and can been used as models of dye-sensitized solar cells (DSSCs). S-Heterocyclic ligands such as thiophene (Th) and tetrathiafulvalene (TTF) derivatives have been widely used in electronic or photoelectronic devices and solar cells. However, a study of the synthesis and properties of TOCs anchored with Th and TTF derivatives is missing. Herein four such TOCs as single crystals were synthesized and structurally characterized: [Ti

Hybrid perovskites are attractive for their applications in photovoltaic devices. We synthesized a novel 1-D hybrid lead iodide, (tu)2Cu2PbI4, in which 1-D PbI3 chains are tetrahedrally orientated to form a crystal lattice with high-symmetry cubic space group Ia3d (No. 230). Optoelectronic and fluorescence properties are studied.

Most large organic cations in the low-dimensional hybrid halide perovskites deteriorate the photoelectric conversion efficiency of the cells. Integrating electronically active organic components into hybrid metal halides is an effective method to improve their photoelectric properties. In this work, a series of compounds obtained by hybridizing redox-active tetrakis(methylthio)tetrathiafulvalene (TMT-TTF) with bismuth chloride, formulated as [TMT-TTF]

Tetrathiafulvalene (TTF) derivatives as promising hole transport materials in assembling hybrid halide perovskite solar cells have attracted great attention; however, electron transfer or charge-transfer (CT) between TTF and metal halides has been studied with less detail at the molecular level. Using molecular models, we herein report four new TTF-bismuth-halides assembled by methylated or protonated bis(4′-pyridyl)-tetrathiafulvalene cations, (MePy)2TTF or (HPy)2TTF, and bismuth-halide anions. Single crystal analysis showed that the cations are stacked to form a TTF column, and the bismuth-halide anions are inlaid between the TTF columns with anion–cation interactions. In these compounds, the main contribution to CT is the intracation CT, namely intramolecular CT (IMCT) from TTF moiety to pyridinium group. However, the anion to cation CT (ACCT) has a significant effect on the IMCT and physical properties. The different anion–cation interaction modes result in different synergistic effects of IMCT and AC...

Inorganic CuSCN and organic tetrathiafulvalene derivatives (TTFs) have been exploited as hole-transport materials (HTM) in hybrid perovskite solar cells. To develop new HTM, we herein report two hybrid materials incorporating redox-active TTFs with CuSCN framework (TTFs-CuSCN). Single-crystal analysis showed that compound [Cu

The use of multiple sensitizers in dye sensitized solar cells has been attractive as a promising way to achieve highly efficient photovoltaic performance. However, except for the complementary absorption, synergistic effects among the dye components have not been well understood. Herein, using ferrocene-1-carboxylate (FcCO2) and catechol (Cat) as dye ligands, two titanium oxo clusters (TOCs), [Ti3O(OiPr)6(Cat)(FcCO2)2] (1) and [Ti7O4(OiPr)8(Cat)5(FcCO2)2] (2), were synthesized and structurally characterized. Another TOC, [Ti7O3(OiPr)12(Cat)4(o-BDC)] (3) (o-BDC = o-benzene dicarboxylate), was also prepared as a contrast. Electronic spectra and theoretical calculations showed that charge transfer occurs from ligands FcCO2 and Cat to the TiO cluster core and the contribution of redox active FcCO2 is greater than that of Cat. Using the clusters as TiO-dye pre-anchored precursors, multi-dye sensitized TiO2 electrodes were prepared. Although the two dyes FcCO2 and Cat do not complement each other in spectra, a ...

Hybrid perovskites are attractive for their applications in photovoltaic devices. We synthesized a novel 1-D hybrid lead iodide, (tu)

A tetrathiafulvalene derivative has been incorporated into a diamond-like structure for the first time. The coordination network shows highly unusual 8-fold interpenetration with redox-active and photoelectric properties.

A systematic study on ligand-to-ligand charge-transfer (LLCT) properties of three closely related metal-organic frameworks (MOFs) is presented. These compounds are formulated as [MnL(4,4'-bpy)(H2O)]n·nCH3CN (1), [MnL(bpe)0.5(DMF)]n·2nH2O (2), and [MnL(bpa)(H2O)]n·2nH2O (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate, 4,4'-bpy = 4,4'-bipyridine, bpe = 1,2-bis(4-pyridyl)ethene, bpa = 1,2-bis(4-pyridyl)ethane). The X-ray single-crystal diffractions show that complexes 1-3 are all two-dimensional (2-D) coordination polymers with different frameworks in crystal lattices. Charge-transfer (CT) interactions within these MOFs are visually apparent in colors and vary according to the conjugated states of the bipyridine ligands (4,4'-bpy, bpe, and bpa). Theoretical calculations show that the charge transfer occurs from ligand L to bipyridine. The intensity of the LLCT is in the order of 213 investigated by theoretical calculations and ESR, which indicates that the intensity of CT is related to the bipyridyl conjugated state. Photocurrent responses of these compounds are consequently studied, and the results are in agreement with the intensity of charge transfer and linearly related to the LLCT energy.

Remarkable progresses regarding pure inorganic frameworks and metal-organic frameworks (MOF) have been made. However, pure inorganic frameworks with MOF-like grid structures are rarely reported due to the weakness of inorganic moiety as a long linear linker. We report herein a fascinating inorganic framework assembled by a [Ge4S10]4- cluster node and a linear [-Cu-MS4-Cu-] (M = Mo (1) and W (2)) inorganic pillar. Their network shows MOF-like orthogonal structure with two interpenetrated two-dimensional (2D) plus 2D to 3D framework and a 1D nano tunnel. Electrodes with crystalline sample of 1 and 2, inorganic sulfide framework, were prepared, and their quasi-capacitance behaviors were investigated. Electrochemical performances were evaluated by cyclic voltammetry and galvanostatic charge-discharge techniques in CsOH, KOH, NaOH, and LiOH electrolytes. The results revealed that the crystal materials exhibit moderate specific capacitance values that are comparable to those of porous sulfide materials.

Although great progress has been made for charge transfer (CT) compounds of various organic donor–acceptor systems, no CT compounds containing both inorganic chalcogenide cluster anions and organic porphyrin cations have been reported. Herein, a germanium chalcogenide cluster (Ge4S104–) is chosen as an electron donor and a methylated tetrakis(4-pyridyl)porphyrin (5,10,15,20-tetrakis(N-methyl-4-pyridyl)porphyrin, TMPyP) is selected as an electron acceptor to create chalcogenide cluster–porphyrin CT compounds (TMPyP-Ge4S10)·5H2O (1) and (MnTMPyP-Ge4S10)·13H2O (2). Their crystal structures have been characterized by single-crystal X-ray diffraction. Compound 1 is an ionic CT salt assembled through interion interactions, and compound 2 is a neutral CT dyad formed by metal–ligand axial coordination of the chalcogenide cluster with manganese porphyrin. The strong charge transfer properties are revealed by electronic spectra, theoretical calculations, 1H NMR, and ESR. The CT intensity of the chalcogenide cluster...

A unique titanium oxo cluster with a ferrocene ligand was synthesized and characterized by single crystal X-ray analysis. Six ferrocene carboxylates coordinate to a D3d Ti6O6 core to be a redox active cluster 1, [Ti6O6(OiPr)6(O2CFc)6]. An analogue 2, [Ti6O6(OiPr)6(O2CiBu)6], where the redox active ferrocene group is replaced by isobutyrate, is also reported as a contrast. The six ferrocene moieties in 1 are structurally identical to give a main redox wave at E1/2 = 0.62 V in dichloromethane investigated by cyclic voltammetry. Photocurrent responses using electrodes of clusters 1 and 2 were studied, and the response properties of 1 are better than those of 2. The electronic spectra and theoretical calculations indicate that charge transfer occurs from ferrocene to Ti(IV) in 1, and the presence of the ferrocene moiety gives efficient electron excitation and charge separation. Cluster 1 is a cooperative system of TiO cluster and redox active ferrocene. Photocurrent response properties of an electrode of 1 fo...