Search

Abstract Ca 0.66 Ti 0.66 Nd 0.34 Al 0.34 O 3 (CTNA) ceramics were prepared by solid-state reaction method and their sintering behavior, microwave dielectric properties, and microstructure were investigated. CTNA ceramics were examined by Raman scattering to reveal the correlation of perovskite structure with the microwave properties. It found that the area of peak A 1g (O) stretch mode reflects the quality factor Q × f value in the perovskite materials. This concludes that the oxygen octahedron plays an important role of the material's microwave performance. Sintering temperature affected the unit cell volume and the lattice parameters of the CTNA ceramics, the grain size distribution, the Gibbs free energy, the thermal expansion coefficient (CTE), and the dielectric properties (ε r , Q × f , τ f). The samples sintered at 1500 °C displayed the best dielectric constant and Q × f , as 44.94 and 41922.22 GHz, respectively. Highlights • The CTNA ceramics were sintered at different temperatures were investigated. • The thermal analysis detailed description of the stages of sintering process. • The unit cell volume is affected by the sintering temperature was confirmed by XRD. • Raman to reveal the correlation of structure with the microwave properties. • Relationship between grain size, Gibbs free energy, CTE, and dielectric properties. [ABSTRACT FROM AUTHOR]

Lithium-sulfur batteries (LSBs) are considered as one of the most promising energy storage devices owing to the high theoretical specific capacity and high theoretical specific energy, as well as natural abundance of sulfur. However, the soluble lithium polysulfide intermediates (LPSs) in electrolyte cause undesirable shuttle effect, resulting in the loss of sulfur and poor cycling stability. Herein, a novel tungsten oxide-decorated N, S co-doped carbon nanofibers (WO 3 @NS-CNFs) functional interlayer is applied to restrain the shuttle effect and enhance the cycling performance of LSBs. On the one hand, the uniformly distributed WO 3 can provide strong chemical anchoring sites for binding the LPSs and enhance the redox reaction kinetics. On the other hand, the NS-CNFs can also serve as the polysulfide trappers and enhance the electronic conductivity of sulfur electrodes. Therefore, benefiting from the synergy effect of WO 3 and NS-CNFs, the LSBs exhibit excellent cycling performance with a high initial capacity of 1444 mA h g−1 and reversible capacity of 1080 mA h g−1 after 100 cycles at 0.2 C, and superior rate capability of 946 mA h g−1 at 2 C. Image 1 • A novel WO 3 @NS-CNFs interlayer is firstly applied as anchor of polysulfides. • Synergistic WO 3 @NS-CNFs can inhibit shuttle effect and enhance redox kinetics. • The LSBs with WO 3 @NS-CNFs interlayers show remarkable electrochemical performance. [ABSTRACT FROM AUTHOR]