Search

Combining molecular imprinting technology with electrostatic spinning technology, a molecularly imprinted nanofiber membrane material with memory and recognition of specific imprinted molecules is thus produced. It has the advantages of high efficiency, reusability, easy amplification, and simple operation. In this study, alkane molecularly imprinted nanofibrous membranes are prepared as a carrier for immobilize Bacillus cereus LY‐1 for the degradation of diesel in oil–water system. The adsorption capacity of the molecularly imprinted material for diesel oil with n‐decyl alcohol as the template molecule reach 120.25 mg g−1, the adsorption capacity of alkane molecularly imprint nanofiber membrane prepared using polyvinyl alcohol (PVA) as the membrane substrate material is 41.37 mg g−1. After 4 days, the immobilized LY‐1 cells eliminate roughly 80.7% of the diesel at a starting concentration of 3 g L−1. The results show that imprinted structures in MINM enhance degradation by loaded microorganisms. [ABSTRACT FROM AUTHOR]

In this work, we have developed a double‐layer nanofiber membrane (NFM) with high selectivity based on molecular imprinting technique by electrospinning methods and applied it in recognizing putrescine. Poly(vinyl alcohol) (PVA) was used as spinning solution, 1,4‐butylene glycol as the imitate template, and ninhydrin as chromogenic agent. The adsorption of the putrescine is corresponded to purple‐color stains on the NFM, which is digitizing intuitively by the ImageJ software. By quantifying the gray value of the stains on the NFM, its imprinting efficiency (IE) is estimated. The adsorption performance of the double‐layer molecular imprinted NFM was studied in detail, showing higher adsorption capacity (71.912 mg mL−1), shorter adsorption equilibrium time of 40 min and higher selectivity to putrescine than our previous works. Furthermore, the material showed remarkable selectivity for putrescine with respect to other three kinds of aliphatic amine in similar molecular structure. The selectivity coefficient (α) of putrescine against cadaverine, spermine, and spermidine are calculated to be 1.734, 2.224, and 2.576, respectively. In addition, since PVA is a water‐soluble material, the NFM is not reusable. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48932. [ABSTRACT FROM AUTHOR]

Poly vinyl acetate grafted calcium alginate hydrogel microspheres were prepared with bovine serum albumin (BSA) as molecular template. The microspheres exhibited homogeneous and core-shell structure according to different preparation strategy. The rebinding and swelling property of microspheres showed responsiveness toward ionic strength, temperature, and pH. It was found the highest separation factor of 1.85 and imprinting efficiency of 1.75 when the Ca2+ ionic strength was 1.25 and 0.34 mol/kg, respectively. The separation factor was found decreased as temperature grew from 29 to 45°C while the imprinting efficiency reached a peak value at about 37°C. Separation factor of BSA imprinted microspheres at different pH was also recorded and two peaks were found, which were considered to be caused by the similar swollen state due to ionic and covalent crosslinking structure of modified microspheres. The recognition responsiveness is suggested to be influenced by environmental effects due to the changing in imprints' configuration at different swollen states. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

Molecularly imprinted latex membrane (MILM) is prepared by core-shell emulsion technique in the presence of a template molecule ( L-Tryptophan). A hard inward and soft outward microstructure latex particle is designed to obtain MILM with both flexibility and impact strength. Molecularly imprinted layer with high crosslinking degree is grafted on the surface of core-shell latex particles. NaCl, glucose, urea, polyethylene glycol, M w 300, etc., are added during the film-forming process to produce porous microstructure in MILM. Fourier transform infrared spectroscopy (FTIR) and Scatchard analysis are used to investigate the interaction between L-Tryptophan and MILM and the binding ability of the resultant MILM, respectively. The functional binding and separation performances in aqueous medium towards template are carried out. The results reveal that the content and type of porogen and the shell composition have significant effects on adsorption capacity and separation ability. MILM with glucose as porogen shows high recognition towards the template with adsorption separation factor reaching 9.06. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

The article discusses a study that examined the rebinding behavior of bovine serum albumin (BSA)-imprinted calcium alginate-hydroxy ethyl cellulose microspheres. It proposes an imprinting induce-fit model that describes the rebinding property of protein-imprinted hydrogel. It details the discovery of three kinds of different interacting forms between protein and imprinted hydrogel using Scatchard analysis. Findings indicate higher imprinting efficiency in microsphere samples with lower cross-linking density.

The article presents a study which describes the preparation of surface macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres (CP/A SMIPMs) under inverse-phase suspension with bovine serum albumin surface imprint. The study uses optical microscopy and rebinding experiments to determine the imprinted microspheres. Result shows that CP/A SMIPMs demonstrate significant improvement in equilibrium rebinding (Qe) and imprinting efficiency.

Electrospinning is an important tool for generating continuous fibers with large surface area and high pore ratio. The combination of nanofiber membrane and molecular imprinting can effectively measure specific adsorption of putrescine with coloring procedure. In this work, molecularly imprinted electrospun chromogenic membrane was synthesized with 1,4‐butanediol (BDO) as imitate template. Poly(vinyl alcohol) (PVA) is used as spinning solution and ninhydrin as chromogenic agent for visualizing detection of target molecular putrescine. The adsorption concentration on molecularly imprinted polymer is illustrated by blue‐purple colored stains and recorded by interactive three‐dimensional surface plot of ImageJ. The results indicated that a uniform and bead‐free PVA nanofiber was obtained using 10% (w/w) PVA solution, 15 kV voltage, 15 cm spinning distance, and 600 rpm roller speed. Also, the adsorption performance of molecular imprinting chromogenic membrane was investigated in detail, showing a higher adsorption capacity of 33.16 μg cm−2 and maximum imprinting efficiency of 2.30 under the best recognition conditions of 315 μL ninhydrin, 0.25% (w/w) BDO, and 0.4 cm sensing distance, as well as a short adsorption equilibrium time of 40 min. In addition, three amine competitors were discussed to reveal the better selectivity and higher specific recognition ability in the imprinted membrane. HIGHLIGHTS: The molecular imprinting and coloring structure is constructed in nanofiber membrane with an enhanced specific surface area.The adsorption on imprinted membrane is visualized by chromogenic reaction between putrescine and ninhydrin to form a three‐dimensional interactive surface proceeded using the ImageJ software.The imprinted nanofiber membrane with large area and high pore ratio is applied in detecting target in trace concentration within shortened time. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48186. [ABSTRACT FROM AUTHOR]