Search

This paper introduces a novel cross-sectional design for concrete-filled steel tubular (CFST) columns termed "concrete-filled double square steel tube" (CFDSST). The CFDSST columns incorporate an inner square steel tube positioned diagonally at 45° relative to the outer square steel tube, which serves as a stiffener for the outer tube. A three-dimensional finite element simulation model is presented to accurately predict the behavior of axially loaded CFDSST short columns. This model considers the influence of concrete confinement by the steel tubes. Experimental data are employed to validate the accuracy of the finite element model. The validated model is then utilized to assess the performance of the proposed columns, considering various geometric and material properties. The results highlight the substantial enhancement in structural performance achieved by the innovative CFDSST column configuration compared to conventional square CFST columns. The integration of the inner CFST components enhances both buckling resistance and the confinement mechanism of the column. This contributes to the increased load-bearing capacity, ductility, and residual strength of the columns. Notably, the steel tube thickness, the yield strength, and the concrete compressive strength greatly affect the performance of the column. Lastly, a simplified design model is formulated to predict the compressive capacity of the CFDSST stub columns, providing accurate outcomes validated by numerical analysis. • A new configuration of CFST columns is introduced. • Finite-element simulation model for CFDSST stub columns is developed. • The behavior of CFDSST stub columns is parametrically studied. • The proposed finite-element simulation and design models provide accurate predictions. [ABSTRACT FROM AUTHOR]

Abstract: When subjected to the horizontal earthquake load, compression–bending–torsion combined actions often exist in the piers of curved bridges because the center of stiffness and the center of mass of curved bridges do not locate at the same position. A new fiber beam-column element considering the nonlinear torsion behavior for concrete filled steel tubes with circular section was developed based on the traditional fiber beam-column model, which had widely been used. The calculation and solution procedures of the proposed fiber beam-column model were also illustrated. The reasonable geometrical relations, material constitutive law and force equilibrium equations were all applied. Based on the principles of fiber beam-column element considering torsion effect, a nonlinear solution program was developed using FORTRAN language. The entire loading history of concrete filled steel tube columns subjected to combined compression–bending–torsion load could be predicted with good agreement with test results. Using the proposed fiber beam-column model for the time-history analysis of curved steel–concrete composite girder bridges, the high solution precision and efficiency could be obtained, compared with the traditional finite element model. [Copyright &y& Elsevier]

Abstract: Based on the quasi-static test on eight CFST columns subjected to pure torsion and compression–torsion cyclic load, the torsion behavior of CFST columns with various section types, steel ratios and axial load levels was studied. The test results showed that the hysteretic curves of CFST columns under pure torsion and low compression–torsion cyclic load are very plump, which indicate that CFST columns have good seismic capacity. The unloading stiffness of CFST columns was equal to the initial elastic stiffness. The torsion capacity of CFST columns could be improved by the low compressive load, and the ductility was also good. But the torsion capacity of CFST columns would be reduced by the high compressive load. When CFST columns subjected to pure torsion, spiral diagonal compressive struts will be created in the in-filled concrete, and the axial components of the diagonal compressive force of the in-filled concrete was equal to the axial tensile force of the steel tube in order to satisfy the axial load equilibrium condition on the section, so the axial strain will be produced in the steel tube. The shear strain has good linear relationship with the rotation angle of the section when CFST columns subjected to pure torsion and compression–torsion combined action. Based on the test results and literatures available, the torsion mechanism of CFST columns was preliminarily analyzed. [Copyright &y& Elsevier]

The concrete-filled steel tube (CFST) column circumferentially confined by carbon fibre reinforced polymer (CFRP), i.e. CFRP-CFST column, is a promising structural member in engineering practice. In this paper, the torsional capacity of CFRP-CFST columns was investigated by means of finite element (FE) simulation and theoretical derivation. Comprehensive FE models were established considering suitable material constitutive laws and interface relationships, which were then verified by experiment results. Besides, parametric analysis was conducted to reveal the geometrical and material parameters' effects on the torsional capacity of CFRP-CFST columns. The results show that the yield strength, the thickness, and the outer diameter of the steel tube are the most influential factors, and the number of CFRP layers also affects the torsional capacity considerably. Meanwhile, the comparison between the CFRP-CFST and CFST column indicates that the confinement effect provided by the CFRP can enhance the torsional capacity. Finally, equations for calculating the torsional capacity of the CFRP-CFST column were proposed and proved to be accurate through comparison with the test data. Unlabelled Image • Comprehensive finite element models were established and verified by test data. • Parametric study on torsional behaviour of CFRP-CFST columns was conducted. • Torsional capacity was compared between CFRP-CFST columns and CFST columns. • Formula for predicting the torsional capacity was proposed and verified. [ABSTRACT FROM AUTHOR]

In this study, a two-side-connected steel plate shear wall (SPSW) reinforced by cold-formed steel (CFS) strips on free edges is proposed. This structure has several advantages, including the ability to avoid additional bending moments on the frame column, convenient layout, and lightweight structure with good assembly effects. To understand the mechanical performance of the novel structure, horizontal reciprocating tests were conducted on two specimens; one was a two-side-connected SPSW reinforced on free edges without a frame and the other with a concrete-filled steel tube frame. The results showed that the two-side-connected SPSW reinforced on free edges still possessed good bearing and energy dissipation capacities. Finite element (FE) models were established, and the numerical analysis results were compared with the test results. Based on the verified FE model, a parametric analysis was performed, leading to the derivation of formulas for calculating the minimum stiffness ratio and buckling bearing capacity. Additionally, formulas for the yield bearing capacity and ultimate bearing capacity were derived based on the calculation formula for the buckling bearing capacity. To improve the design efficiency, a simplified truss model (STM) was proposed. The stress–strain relationship of the equivalent truss was established based on the aforementioned bearing capacity calculation formulas. The STM calculation results were compared with the test results, indicating a high level of accuracy and significantly improved calculation efficiency. • A two-side-connected steel plate shear wall reinforced on free edges is proposed. • The mechanical properties of the specimens were derived and analysed. • The calculation formulas for the elastic buckling, yield and ultimate bearing capacity were introduced. • To improve the design efficiency, a simplified truss model (STM) was proposed. [ABSTRACT FROM AUTHOR]

Tapered concrete-filled double-skin steel tubular columns with large hollow ratio (LHR-CFDST) have a good application potential in wind turbine towers, where they are commonly subjected to the combined action of compression, bending, shearing and torsion. Up to now, research work on the behaviour of tapered LHR-CFDST columns under combined loads is seldom reported and relevant experimental data are limited. This paper presents an experimental and numerical study on the tapered LHR-CFDST column under combined compression-bending-shear-torsion loads. Seven specimens with different parameters including the tapered angle, the hollow ratio, the torsion-to-bending ratio, the axial compression ratio and the height-to-diameter ratio were tested. The experimental results in terms of failure modes, load versus deformation relations and strain responses were discussed. Reliable finite element models were established to conduct numerical analysis in an extended parameter range. The mechanism of columns and the effects of torsion-to-bending ratios, axial compression ratios, height-to-diameter ratios, tapered angles, hollow ratios, diameter-to-thickness ratios of steel tubes and the material strength were revealed. The suitability of the existing ultimate capacity prediction method was evaluated for tapered LHR-CFDST columns. It is found that the failure mode of columns under compression-bending-shear-torsion loads is related to the torsion-to-bending ratio. The columns behave in a ductile manner under moderate axial compression. Tapered angle has a slight effect on the bending capacity of the column, whereas the capacity declines with the increase of hollow ratio and torsion-to-bending ratio. The existing method gives a conservative prediction for the ultimate capacity of tapered LHR-CFDST columns. • Tests on tapered LHR-CFDST columns under combined compression-bending-shear-torsion loads are reported. • Behaviour and mechanism of tapered LHR-CFDST columns under combined loads are discussed. • Numerical analyses are conducted and effects of important parameters are revealed. • Suitability of the existing ultimate capacity prediction method is evaluated. [ABSTRACT FROM AUTHOR]

The concrete-filled steel plate (CFSP) composite coupling beam is a newly developed form of coupling beam that possesses high deformation and energy dissipation capacities. In this paper, the shear capacity of concrete-filled steel plate composite coupling beams was investigated. An analytical model was proposed based on the force mechanism of the composite coupling beam and was proved to have adequate accuracy compared with the available test results. The shear capacity of the composite coupling beam was found to be governed by flexural strength, shear strength, or flexural-shear strength, depending on the material and geometrical properties of the coupling beam. By incorporating the effect of flexural-shear interaction, a unified equation was finally developed. [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratios (LHR-CFDST), as quintessential elements within offshore wind turbine structures, have received significant attention in contemporary times. As the scale of this type of structure continues to expand, an effective strategy to reduce steel consumption involves elevating the diameter-to-thickness (D/t) ratios of the steel tubes. Presently, there is a dearth of studies that explore the performance of LHR-CFDST columns in the case of thin-walled inner steel tubes. Four LHR-CFDST columns with varying D/t ratios of the inner tubes and one double-skin hollow steel tubular column were produced and tested under axial compression. The study encompassed an investigation into failure modes, local buckling behaviors, and ductility characteristics. The local buckling performance index of specimens with varying D/t ratios differed by up to 16.9%. Furthermore, the verified finite element model was subsequently employed for mechanistic analyses pertaining to the sandwiched concrete's stress distributions, and so on. When the peak loads were attained, the maximum variation in the stress values of the concrete of the specimens with different D/t ratios reached 50.4%. Subsequently, a multi-parameter impact analysis was applied to give a reasonable limit on the D/t ratio (225) of the inner steel tube for engineering design. Finally, the prevailing ultimate strength formulas outlined in established specifications were adapted by integrating the characteristics uncovered through this investigation. • Thin-walled inner tubes have a significant effect on CFDST with large hollow ratios • Inner tube's D/t ratio is positively correlated with the local buckling • Stress distribution and contact stresses in concrete are inextricably linked to the inner tube's D/t ratio • Multi-parameter impact analysis gives a reasonable limit of the D/t ratio for design • The equation considering the effect of buckling predict the CFDST columns with thin-walled inner tubes more accurately [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratio (LHR-CFDST) have been commonly used in recent years. With the increasing size of the engineering structures, one efficient way to decrease the consumption of steel is to increase the diameter-to-thickness ratio. Few studies have been conducted to report on thin-walled LHR-CFDST columns. At the same time, local buckling may occur in these structures in the absence of stiffening measures. Based on this, an experimental and numerical analysis was carried out for the stiffened thin-walled LHR-CFDST columns under axial compression in this paper. Five thin-walled LHR-CFDST columns with different stiffening measures (ribs, studs) were tested. The failure modes, load versus shortening curves, local buckling behaviours and ductility were investigated. The test results indicates that the stiffened measures effectively delayed the appearance of local buckling and increased the peak load. Besides, the finite element models validated by the test results were applied to the subsequent mechanical mechanism analysis of the stiffened thin-walled LHR-CFDST. It can be seen that the stiffened measures enhance the confinement of the inner and outer steel tubes on the concrete and greatly improve the ultimate strength of the concrete. Finally, the predicted peak load formulae in the existing design specifications were modified by combining the characteristics of the specimens in this paper. The peak load values obtained by the improved formulae agreed well with the test results. • Five thin-walled CFDST columns with different stiffening forms (ribs, studs) were tested under axial compression. • The effects of stiffeners on the local buckling and peak load of specimens were revealed. • The validated finite element model was developed to further analyze the structural mechanisms. • The interaction between steel tubes and concrete were investigated. • The predicted peak load formulae in the existing design specifications were modified. [ABSTRACT FROM AUTHOR]

This paper studies the load introduction and transfer mechanisms for steel-encased concrete-filled steel tube (CFST) K-type connections experimentally and numerically. Six K-type CFST connections with encased built-up latticed angles were tested. The finite element (FE) models were established and verified by the experimental results. Effectiveness of the reinforcing plates, i.e., direct bearing in an extended range was evaluated based on the parametric analysis. The upper chord length of 2 D mm is sufficient to transfer the required load from the chord wall to inner concrete via the direct shear interaction only. Though employing insufficient confinement provided by the chord wall, the chord with non-compact and slender sections cannot fully transfer the required load, even if the reinforcing plates are adopted. In general, due to the non-uniformed load introduction from single-side braces in K-type CFST connections, the reinforcing plates cannot effectively provide direct bearing to the inner concrete due to the localised stress effect and plying force. Furthermore, the ability of load transfer in the interface of inner concrete and encased angles should be ensured to achieve full utilisation of angle strengths. Finally, the equations for the lengths of load introduction between the tube-concrete and concrete-angle interfaces were proposed according to the numerical results. The comparison with the numerical results demonstrates that the proposed equations can predict load introduction lengths accurately and reliably. • Load introduction within steel-encased CFST K connections is assessed experimentally and numerically. • Non-uniform load transfer is found for single-side brace CFST connections. • Effectiveness of reinforcing plates is studied in contributing direct bearing to the load transfer. • Shear interaction and direct bearing mechanisms for steel-encased columns are evaluated. • Design equations for load introduction lengths are proposed. [ABSTRACT FROM AUTHOR]

Both concrete-filled steel tube (CFST) column and buckling-restrained steel plate shear wall (BRSPSW) have the advantages of high load-carrying capacity and superior seismic performance. The structural system composed of CFST columns and BRSBSWs will have the superior mechanical performance and be more suitable for high-rise buildings. In this study, the pseudo-static tests were carried out on the specimens of unstiffened steel plate shear wall and cold-formed steel (CFS) BRSPSW which were infilled in the single-span two-story 1/3 scaled composite frame respectively. The test results show that the CFS stiffeners have the obvious effect of restraining the outward buckling deformation on the steel plate, improving the lateral stiffness and resistance of the steel plate, and reducing the deflection deformation of the steel plate to the surrounding composite frame. The finite element (FE) model was established and validated, and the interaction between the BRSPSW and the composite frame was analysed. In combination with the theory and the FE analysis results, the maximum deflection limits of CFST column and steel beam were proposed to ensure the strength of the infill BRSPSW to give full play. Considering the separation of the steel tube wall of square CFST from the core concrete in the process of loading, the deflection limit of square CFST is proposed considering the separation effect of the steel tube wall of square CFST from core concrete under the action of infilled steel plate. • A novel buckling-restrained SPSWs with composite structure was investigated. • The interaction behaviour of buckling-restrained SPSW and boundary composite frame were discussed. • The deflection limit of square CFST and steel beams is proposed under the action of infilled steel plate. [ABSTRACT FROM AUTHOR]

Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) columns have been commonly used in structures. To report further information, it is necessary to perform more studies on the structural behaviour of tapered CFDST columns, especially for those with high hollow ratios. This paper thus conducted an investigation on the tapered CFDST stub columns under axial compression. Specimens with varied tapered angle, hollow ratio and tubes' thickness were tested, and then typical failure modes, load versus displacement relations as well as strain development were revealed. Validated finite element models were given to further analyse the columns' structural mechanisms including the stress distributions, the interaction between the steel tubes and the sandwiched concrete, and the influence of main parameters. The ultimate strength of specimens was calculated tentatively using the methods in the existing design guidelines, and their accuracy and applicability for the tapered CFDST stub columns with high hollow ratios were preliminarily evaluated. A simplified method was suggested to predict the ultimate strength based on one of the guidelines, and the predictions show reasonable agreement with the test results. [Display omitted] • Tests on tapered CFDST stub columns under axial compression are reported. • Experimental performance of tapered CFDST stub columns is revealed. • Mechanism analysis is conducted through verified finite element models. • Methods for predicting the ultimate strength of tapered CFDST columns are checked. [ABSTRACT FROM AUTHOR]