Search

Abstract: First-principles calculations based on density functional theory and the generalized gradient approximation have been used to study the adsorption and dissociation of CH4 on Ni(100) surface. The favored adsorption sites of H, CH3, and CH4 are identified by considering the energy and stability of various binding sites. H atoms prefer the fourfold Hollow sites, while CH3 species favors the Bridge site with one of the C–H bonds pointing towards the neighbor Ni atom. When H and CH3 are coadsorbed on Ni(100) surface, several stable configurations are found, in which the atomic H and CH3 species are adsorbed at the Hollow and Bridge site, respectively, because of their little energetic difference. Through the electronic and vibrational calculations, the C–H–Ni three-center bond is regarded as the key factor determining the CH3 adsorption. The CH4 dissociation on Ni(100) surface is investigated with three different CH4 orientations considered. The energy barriers are calculated to be 0.61, 0.61 and 0.62eV, corresponding to the CH4 molecules orientated with one, two and three C–H bonds pointing towards the surface, respectively. All calculated activation energies have been corrected by including zero-point energy and dispersion energy, and are in good agreement with the experimental result (0.61±0.02eV). Because the energy barriers for the different reaction pathways take similar values, the CH4 orientation has a minor effect on the reactivity. [Copyright &y& Elsevier]

Shaped metal particles are known to possess distinct catalytic properties, which is often attributed to the catalytic activities of different particle facets. In this contribution, propane dehydrogenation on Pt particles of different shapes is investigated by a combination of experiments and DFT calculations. The selectivity toward propylene and catalyst stability in propane dehydrogenation can be enhanced by shaping Pt nanoparticles under industrially relevant conditions. Octahedral particles (12.0 nm) dominated by the Pt(1 1 1) surface have higher selectivity toward propylene production and better stability than cubic particles (11.5 nm) that are dominated by the Pt(1 0 0) surface. Combined experiments and DFT calculations suggest that the weakened binding strength of propylene and increased energy barrier for the C–H bond cleavage in propylene dehydrogenation on Pt(1 1 1) compared to Pt(1 0 0) and Pt(2 1 1) contribute to the higher selectivity toward propylene by lowering the formation possibility of the deeply dehydrogenated intermediates. When coke is formed on the Pt surface, the d -band of surrounding Pt atoms is shifted farther below the Fermi level, leading to the deactivation of Pt catalyst. Our DFT calculations provide a rational interpretation of the experimental observations regarding the shape effects on propane dehydrogenation. [ABSTRACT FROM AUTHOR]

Novel heterostructured TiO 2 /Co 4 S 4.23 Se 3.77 composites were synthesized by a combination of solid-state and sol–gel methods, and were characterized by single-crystal X-ray diffraction, powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, UV–vis diffuse reflectance spectroscopy, and photocurrent measurements. The results of photocatalytic degradation of methylene blue over the as-prepared materials indicate that photocatalytic efficiency is closely related to the composition of the materials, and the 30%TiO 2 /Co 4 S 4.23 Se 3.77 catalyst exhibits the best adsorption and photodegradation efficiency under sunlight or visible-light irradiation. The adsorption capacity of 30%TiO 2 /Co 4 S 4.23 Se 3.77 for methylene blue is 18.59 mg/g calculated based on the Langmuir adsorption model. Adsorption kinetics studies show that the process fits well with a pseudo-second-order rate mechanism. Recycle experiments confirm that the 30%TiO 2 /Co 4 S 4.23 Se 3.77 catalyst is stable. The present work illustrates a new way for the design and syntheses of stable and high-efficiency catalysts applicable for the degradation of organic pollutants. [ABSTRACT FROM AUTHOR]

Abstract: Ammonia decomposition on transition metal surfaces is of great importance in energy and environmental industries. With the aim to obtain a systematic knowledge about the reaction mechanism of NH3 decomposition on the close-packed surfaces of the 3d-late transition metals, we perform first-principles calculations to determine the preferred adsorption sites and the adsorption energies of NH x (x =0–3) and H, and identify the transition states of the NH3 stepwise dehydrogenation reactions and the N recombination reactions on the close-packed Fe(110), Co(111) and Ni(111) surfaces. The results show that the calculated adsorption energies and activated energies mainly depend on the d-band center of metal surfaces. Barrier decomposition analysis reveals that the interaction among binding species in transition states will increase the energy barrier while the bonding to the surface of the species in the initial states and the transition states will decrease the energy barrier. Moreover, a linear relationship, known as the Brϕnsted–Evans–Polanyi relation, also exists between the activation energy of the N recombination reaction and the adsorption energy of N on the close-packed surfaces of the 3d-late transition metals. [Copyright &y& Elsevier]

Abstract: First-principles calculations based on density functional theory have been performed to elucidate the reaction mechanism for ethylbenzene dehydrogenation and the role of CO2 in H removal. On the basis of the experimental information and theoretical prediction, three model surfaces with Fe-, ferryl- and O-termination are constructed to represent the active Fe2O3(0001) surface. The calculated results indicate that on all of the three surfaces the C–H activation in the methylene group followed by the dehydrogenation of the methyl group is kinetically more favorable. The energy barriers for ethylbenzene dehydrogenation are lowest on the O-terminated surface, but the generated styrene is adsorbed too strongly to be released. As CO2 decomposition and the formation of HCOO are hindered by the relatively high activation energies, CO2 cannot serve as the oxidant to recover the O- and ferryl-terminated surfaces to keep the redox cycle. At the steady state of the reaction the coupling mechanism dominates on the Fe-terminated surface, with the synergistic effect between ethylbenzene dehydrogenation and the reverse water–gas shift reaction. Since the energy barrier for the formation of COOH is comparable to that for H2 formation, both the one-step and two-step pathways are predicted to contribute to the coupling mechanism, although the former is more probable. [Copyright &y& Elsevier]

Abstract: DFT–GGA calculations have been used to study the chemisorption of CH x (x =0–3), C2H y (y =3–5) and C3H z (z =3–8) on Pt(111) at the coverage of 1/9 ML. The adsorption energies, favored binding sites and geometric parameters of adsorption configurations are determined. All the carbonaceous species are found to be adsorbed on Pt(111) with C atoms sp3-hybridized. The geometries of adsorption configurations have been compared with published experimental data to evaluate the reliability of our calculation method. The calculated adsorption energies of C1 species, ranked in descending order, are as follows, C>CH>CH2 >CH3, and the similar trend has been observed with respect to the chemisorption of C2 species. As for the C3 species, propylene prefers binding to the surface in the di-σ mode and the adsorption energy is calculated to be −0.93eV. The stepwise dehydrogenation of propane to propynyl (CCCH3) is investigated by calculating the change of reaction heat, which suggests that propylidyne (CCH2CH3) is the most stable species on Pt(111). Based on the adsorption energies and Brønsted–Evans–Polanyi (BEP) analysis, propyne is predicted to be the most likely starting point for the C–C scission. [Copyright &y& Elsevier]