Search

Background: This study aimed to investigate the difference in lateral distal femoral angle (LDFA) between knees with medial osteoarthritis (mOA) and knees without osteoarthritis, and to explore the validity of the assumption that there is no bone wear on the femoral articular surface in kinematic alignment total knee arthroplasty (KA-TKA)., Methods: The study included 69 patients with mOA on one side of the knee and but no OA on the other side. LDFA, medial proximal tibial angle (MPTA), mechanical hip-knee-ankle angle (mHKA), and arithmetic hip-knee-ankle angle (aHKA) were measured and compared between the knees. Pearson's correlation coefficient and paired t-tests were used for statistical analysis., Results: The LDFA and MPTA were significantly more varus in mOA knees than in knees non-OA knees, with differences of 1.0° ± 2.3° and 0.9° ± 2.0°, respectively. The difference between mHKA of the non-OA side and aHKA of the mOA side was not significant, indicating that it is appropriate to use aHKA as an estimation of postoperative alignment after kinematically-aligned total knee arthroplasty without anatomical correction. However, there was a significant difference in MPTA and aHKA between male and female patients in both mOA and non-OA knees., Conclusions: The assumption that there is no bone wear on the femoral articular surface is rejectable, and the constant compensation thickness of 2 mm for cartilage wear may not be sufficient. Further research is needed to estimate the amount of bone wear in both femur and tibia side to develop more individualized surgical planning strategies in KA-TKA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Purpose: To evaluate the bearing orbit of the tibial component during extension-flexion motion in Oxford unicompartmental knee arthroplasty., Materials and Methods: A total of 32 knees in 25 patients with medial osteoarthritis who underwent Oxford unicompartmental knee arthroplasty were evaluated. The distance between the vertical wall of the tibial component and the bearing (wall-bearing distance) and that between the anterior edge of the tibial component and the bearing (sagittal bearing position) were measured at 0°, 30°, 60°, 90° and 120° knee flexion with neutral tibial rotation (extension-flexion motion), and internal and external tibial rotation with 90° knee flexion (tibial rotation motion). A custom-made rounded trial bearing and caliper were used for this measurement. We calculated the wall-bearing distance, change in extension-flexion motion and tibial rotation motion. Wall-bearing distances and change in wall-bearing distance were compared using ANOVA or t-test., Results: The wall-bearing distance was smallest at 60° and increased 1.0 ± 1.1 mm in knee extension and 1.1 ± 1.5 mm in knee flexion. The bearing moved posteriorly with knee flexion, and the sagittal bearing position increased by 8.1 ± 3.4 mm during extension-flexion motion. Consequently, the bearing moved in a rough C-shaped orbit of the tibial component., Conclusions: The mobile bearing moves in a rough C-shape and is mostly close to the vertical wall of the tibial component at 60°. The wall-bearing distance can change during extension-flexion motion and might be influenced by tibial component rotation. To avoid bearing separation from or contact with the vertical wall that may cause bearing dislocation, the wall-bearing distance should be evaluated before keel slot preparation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: Restricted kinematically-aligned total knee arthroplasty (KA-TKA) is a reasonable modification to avoid the alignment outlier that may cause implant failure. However, despite a noted high incidence of constitutional varus in Japanese individuals, there has been no investigation into how many knees require the restriction in restricted KA-TKA (RKA-TKA) among Japanese patients. Therefore, we conducted a study using preoperative long-leg radiograms., Methods: We studied long-leg radiographs of 228 knees in 114 consecutive patients. The numbers of knees within the safety range and their corrective osteotomy angle in the restriction algorithms advocated by Almaawi et al. (2017) and MacDessi et al. (2020) were evaluated., Results: According to the algorithms used by Almaawi et al. and MacDessi et al., out of 228 knees, 46 (20%) and 39 (17%) fell within the safety range, respectively. The mean correction angles of the hip-knee-ankle angle, lateral distal femoral angle and medial proximal tibial angle were 2.8 ± 3.4°, 0.4 ± 1.4° and 2.4 ± 2.8° in the algorithm used by Almaawi et al., while they were -4.9 ± 4.7°, 1.1 ± 2.5° and -6.0 ± 3.4° in the algorithm used by MacDessi et al. Most of the knees needed to be restricted in order to perform RKA-TKA, regardless of the algorithm used., Conclusions: Based on a preoperative analysis of long-leg radiograms in a Japanese population, most knees fall out of the safety range in RKA-TKA. Surgeons must consider whether to allow component outlier or to perform corrective osteotomy that likely requires soft tissue release., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Background: Joint line orientation angle (JLOA) is the angle between the knee joint line and the floor. It has been reported to be related to postoperative outcome after TKA. Regarding unicompartmental knee arthroplasty (UKA), although it can be horizontal after UKA because it is a resurfacing surgery, there are few reports about the JLOA after UKA and its impact on clinical outcomes., Purpose: The purpose of this study was to reveal the relationship between JLOA and clinical outcome after UKA., Methods: This study included 106 knees in 53 consecutive patients with osteoarthritis who underwent simultaneous bilateral mobile-bearing UKA. Their pre- and postoperative JLOAs were measured by full-leg-length standing coronal radiographs. We also evaluated the tibial component height (TCH) as the factor which we assumed could influence JLOA. We analyzed the patients' JLOAs, TCHs and clinical outcomes., Results: Pre- and postoperative JLOA were 0.4 ± 2.4° and 2.7 ± 2.6°, respectively. The JLOA significantly tilted medially (P < 0.0001). The JLOA significantly negatively correlated with the improvement of the clinical outcomes (Oxford Knee Score (OKS): r = 0.40, P < 0.0001, Knee Society Knee Score (KSKS): r = 0.25, P < 0.01, Knee Society Function Score (KSFS): r = 0.22, P = 0.02). The TCH showed a positive correlation with postoperative JLOA and with the postoperative JLOA change (r = 0.45, P < 0.001; r = 0.25, P < 0.01, respectively)., Conclusion: The JLOA significantly tilted medially after UKA. An excessive medial tilt of the JLOA was associated with poorer postoperative outcomes of UKA. It is therefore recommended to keep the JLOA horizontal and to avoid a lower tibial cut., Competing Interests: Declaration of Competing Interest T. Hiranaka reports personal fees from Zimmer Biomet during the conduct of this study. All other authors have no conflicts of interest to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: The aim of this retrospective study was to clarify if unicompartmental knee arthroplasty (UKA) can acquire a greater postoperative flexion angle than total knee arthroplasty (TKA) in the same individuals after adjusting for the preoperative flexion angle and if the preoperative flexion angle correlates with the change in flexion postoperatively., Methods: Thirty-five patients between 2011 and 2017 who had undergone simultaneous TKA on one knee and UKA on the other knee were included in the study. Range of motion was measured preoperatively and at one year after the surgery. The relationship between the pre- and postoperative flexion angles was evaluated., Results: UKA can acquire approximately 10° greater flexion postoperatively when compared to TKA, even after adjustment for the preoperative flexion angle. The preoperative flexion angle is strongly and negatively correlated with the change in flexion angle in both the TKA and UKA knees. A preoperative knee with a smaller flexion angle will gain greater flexion postoperatively, whereas a preoperative knee with a greater flexion angle tends to lose flexion angle. The thresholds of gain/loss are estimated as 123° and 135° in TKA and UKA knees, respectively., Conclusions: These results provide an evidence that the UKA can acquire a greater postoperative flexion angle than the TKA and valuable information for patients who demand a deep postoperative flexion angle., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: One of the conditions constituting surgical indication for medial mobile-bearing unicompartmental knee arthroplasty (UKA) is that there is full-thickness cartilage in the lateral compartment under valgus stress radiography. However, it is unclear whether medial unicompartmental knee arthroplasty should be performed if there is degeneration of the lateral meniscus on preoperative magnetic resonance imaging (MRI)., Methods: The records of 77 patients (77 knees) who underwent Oxford mobile-bearing UKA were retrospectively reviewed. Based on the status of the lateral meniscus in each knee using preoperative MRI with Stoller's classification system, the patients were divided into two groups; a normal group and a lateral meniscus degenerated group (grades 1-3). The preoperative personal data and the outcome data three years postoperatively were compared., Results: The normal group contained 31 knees while the lateral meniscus degenerated group comprised 46 knees. There was no difference in clinical outcome or knee function between the groups at three years after UKA. There was no difference in re-operation and revision rate between the groups with no revisions in either group., Conclusions: It may not be necessary to exclude UKA indications for cases with degenerative findings in the lateral meniscus on preoperative MRI., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: This study examined how coverage of the tibial component changes when the tibia vertical cut is externally or internally rotated in Oxford mobile-bearing unicompartmental knee arthroplasty., Materials and Methods: Fifty patients scheduled for primary Oxford medial unicompartmental knee arthroplasty (UKA) at the current hospital were included in this study. This study was a computed tomography (CT) simulation study. The anteroposterior (AP) and mediolateral (ML) length as well as the ML/AP ratio of the tibial cut surfaces were calculated when the vertical cut was performed parallel (base line), five degrees externally rotated (ER5), 10° externally rotated (ER10), five degrees internally rotated (IR5), or 10° internally rotated (IR10) relative to the tibial AP line using pre-operative CT. The tibial AP line connecting the middle of the posterior collateral ligament to the medial border of the patellar tendon attachment is a reproducible and reliable line because it is perpendicular to the SEA. These parameters among three lines were compared using a repeated measures ANOVA., Results: The mean ML/AP ratios were statistically significantly lower in ER5 (0.53 ± 0.04) than base line (0.56 ± 0.04) (P < 0.01). The ER10 (0.48 ± 0.03) also exhibited lower mean ML/AP ratios than ER5 (0.53 ± 0.04) (P < 0.01). The mean ML/AP ratios were higher in IR5 (0.59 ± 0.04) than base line (0.56 ± 0.04) (P < 0.01). The IR10 (0.63 ± 0.06) also showed a higher mean ML/AP ratio than IR5 (0.59 ± 0.04) (P < 0.01)., Conclusion: Rotational malalignment of tibial vertical cuts can affect tibial coverage in Oxford mobile-bearing unicompartmental knee arthroplasty., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: Malposition of tibial components is an important factor for complications in unicompartmental knee arthroplasty (UKA), but the direct relationship between clinical outcomes and position of tibial component remains unknown. We aimed to investigate whether tibial component rotation in the axial plane could affect clinical outcomes after UKA., Methods: A total of 50 patients with anteromedial osteoarthritis of the knee underwent Oxford mobile-bearing UKA in this study. Patient-derived clinical scores using the Oxford Knee Score (OKS) and the functional activities of Knee Society Score (KSSF) were assessed preoperatively, and then after one year and two years following surgery. Postoperative tibial component rotation angles using two reference lines in the axial plane were assessed using three-dimensional computed tomography two weeks postoperatively. External rotation of the tibial component relative to each reference line was considered a positive value. We analysed the sequential change of the OKS and KSSF using repeated measures analysis of variance (P < 0.05). The effects of tibial component rotation on the OKS and KSSF were analysed using linear regression analysis., Results: OKS and KSSF showed significant recovery between the preoperative and one-year postoperative period. Rotation angles of tibial components had significant negative correlations with the recovery of the OKS in the two years following UKA., Conclusions: Tibial component rotation played an important role in improving clinical outcomes during the two years following Oxford mobile-bearing UKA. A trend towards poor outcome was observed when the tibial component was placed at a higher angle of external rotation., Level of Evidence: III., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Background: There have been very few reports on isolated medial tibial plateau osteonecrosis, and the condition has not been clearly described. Unicompartmental knee arthroplasty (UKA) may be an appropriate treatment method for this condition. The aims of this study were to report our experience of using mobile-bearing knee implants for osteonecrosis of the medial tibial plateau and to discuss the etiology and treatment of this type of osteonecrosis., Methods: This study included six consecutive patients with isolated medial tibial plateau osteonecrosis treated with an Oxford mobile-bearing knee implant. The average age was 71.0 years. We preoperatively graded the tibial necrosis lesion using radiographic findings. We also assessed the area and size of necrosis, extent of the surrounding high-density area, and the presence of any meniscal lesions by preoperative magnetic resonance imaging (MRI), and pre- and postoperative Oxford Knee Scores (OKS) were evaluated., Results: MRI findings revealed that all patients had meniscal lesions in addition to a necrotic lesion. All patients significantly improved in their OKS. No knees required revision for either infection or loosening., Conclusions: The etiology of these cases of necrosis is still unclear, but the current study suggested an association with medial meniscal lesions. The results of the study were promising, showing a good short-term clinical outcome of Oxford mobile-bearing UKA for this type of osteonecrosis., (Copyright © 2018 Elsevier B.V. All rights reserved.)