Search

Infrared antireflection of a zinc sulfide (ZnS) surface is important to improve performance of infrared detector systems. In this paper, double-pulse femtosecond laser micro-machining is proposed to fabricate a subwavelength quasi-periodic array (SQA) on ZnS substrate for infrared antireflection. The SQA consisting of approximately 30 million holes within a 2 × 2 cm2 area is uniformly formed in a short time. The double-pulse beam can effectively suppress the surface plasma shielding effect, resulting in obtaining a larger array depth. Further, the SQA depth is tunable by changing pulse energy and pulse delay, and can be used to readily regulate the infrared transmittance spectra as well as hydrophobicity. Additionally, the optical field intensity distributions of the SQA simulated by the rigorous coupled-wave analysis method indicate the modulation effect by the array depth. Finally, the infrared imaging quality captured through an infrared window embedded SQA is evaluated by a self-built infrared detection system. [ABSTRACT FROM AUTHOR]

The high-quality, high-efficiency micro-hole drilling of structural ceramics to improve the thermal conductivity of hot-end parts or achieve high-density electronic packaging is still a technical challenge for conventional processing techniques. Recently, the laser drilling method (LDM) has become the preferred processing tool for structural ceramics, and it plays an irreplaceable role in the industrialized processing of group holes on structural ceramic surfaces. A variety of LDMs such as long pulsed laser drilling, short pulsed laser drilling, ultrafast pulsed laser drilling, liquid-assisted laser drilling, combined pulse laser drilling have been developed to achieved high-quality and high-efficiency micro-hole drilling through controlling the laser–matter interaction. This article reviews the characteristics of different LDMs and systematically compares the morphology, diameter, circularity, taper angle, cross-section, heat affect zone, recast layer, cracks, roughness, micro–nano structure, photothermal effect and photochemical reaction of the drilling. Additionally, exactly what processing parameters and ambient environments are optimal for precise and efficient laser drilling and their recent advancements were analyzed. Finally, a summary and outlook of the LDM technology are also highlighted. [ABSTRACT FROM AUTHOR]

In order to improve the performance of silver nanowire (AgNW) flexible transparent conductive films (FTCFs), including the conductivity, uniformity, and reliability, the welding of high repetition rate femtosecond (fs) laser is applied in this work. Fs laser irradiation can produce local enhancement of electric field, which induce melting at the gap of the AgNWs and enhance electrical conductivity of nanowire networks. The overall resistivity of the laser-welded AgNW FTCFs reduced significantly and the transparency changed slightly. Meanwhile, PET substrates were not damaged during the laser welding procedure in particular parameters. The AgNW FTCFs can achieve a nonuniformity factor of the sheet resistance as 4.6% at an average sheet resistance of 16.1 Ω/sq and transmittance of 91%. The laser-welded AgNW FTCFs also exhibited excellent reliability against mechanical bending over 10,000 cycles. The welding process may open up a new approach for improvement of FTCFs photoelectric property and can be applied in the fabrication of silver nanostructures for flexible optoelectronic and integration of functional devices. [ABSTRACT FROM AUTHOR]