Search

Spin and orbital angular momenta are two of the most fundamental physical quantities that describe the complex dynamic behaviors of optical fields. A strong coupling between these two quantities leads to many intriguing spatial topological phenomena, where one remarkable example is the generation of a helicity-dependent optical vortex that converts spin to orbital degrees of freedom. The spin-to-orbit conversion occurs inherently in lots of optical processes and has attracted increasing attention due to its crucial applications in spin–orbit photonics. However, current researches in this area are mainly focused on the monochromatic optical fields whose temporal properties are naturally neglected. In this work, we demonstrate an intriguing temporal evolution of the spin-to-orbit conversion induced by tightly-focused femtosecond optical fields. The results indicate that the conversion in such a polychromatic focused field obviously depends on time. This temporal effect originates from the superposition of local fields at the focus with different frequencies and is sensitive to the settings of pulse width and central wavelength. This work can provide fundamental insights into the spin–orbit dynamics within ultrafast wave packets, and possesses the potential for applications in spin-controlled manipulations of light.

As a powerful molecular detection approach, tip-enhanced Raman scattering (TERS) spectroscopy has the advantages of nanoscale spatial resolution, label-free detection and high enhancement factor, therefore has been widely used in fields of chemistry, materials and life sciences. A TERS system enhanced by the focused gap-plasmon mode composed of Surface Plasmon Polariton (SPP) focus and the metal probe has been reported, however, its underlying enhancement mechanism for Raman excitation and scattering remains to be deeply explored. Here, we focus on the different performances of optical focus and SPP focus in the TERS system, and verify that the cooperation of these two focuses can produce maximum enhancement in a local electromagnetic field. Further, the Purcell effect on sample scattering in such a system is studied for the enhancement of Raman scattering collection in the far field. Finally, the local field enhancement and the sample far-field scattering enhancement are combined to show a full view of the whole process of TERS enhancement. This research can be applied to optimize the excitation and collection of Raman signals in TERS systems, which is of great value for the research and development of TERS technology.

Photonic skyrmions and merons are topological quasiparticles characterized by nontrivial electromagnetic textures, which have received increasing research attention recently, providing novel degree of freedom to manipulate light-matter interactions and exhibiting excellent potential in deep-subwavelength imaging and nanometrology. Here, the topological stability of photonic spin meron lattices, which indicates the invariance of skyrmion number and robustness of spin texture under a continuous deformation of the field configuration, is demonstrated by inducing a perturbation to break the C4 symmetry in the presence spin-orbit coupling in an optical field. We revealed that amplitude perturbation would result in an amplitude-dependent shift of spin center, while phase perturbation leads to the deformation of domain walls, manifesting the metastability of photonic meron. Such spin topology is verified through the interference of plasmonic vortices with a broken rotational symmetry. The results provide new insights on optical topological quasiparticles, which may pave the way towards applications in topological photonics, optical information storage and transfer.

Traditional OAM generation devices are bulky and can generally only create OAM with one specific topological charge. Although metasurface-based devices have overcome the volume limitations, no tunable metasurface-based OAM generators have been demonstrated to date. Here, a dynamically tunable multi-topological charge OAM generator based on an ultrathin integrable graphene metalens is demonstrated by simulation using the detour phase technique and spatial multiplexing. Different topological charges can be designed on different focal planes. Stretching the OAM graphene metalens allows the focal plane and the topological values to be changed dynamically. This design method paves an innovative route toward miniaturization and integrating OAM beam-type photonic devices for practical applications.

Plasmonic tip nanofocusing has widely been applied in tip-enhanced Raman spectroscopy, optical trapping, nonlinear optics, and super-resolution imaging due to its capability of high local field enhancement. In this work, a substrate with a circular nanocavity is proposed to enhance the nanofocusing and optical trapping characteristics of the plasmonic tip. Under axial illumination of a tightly focused radial polarized beam, the circular nanohole etched on a metallic substrate can form a nanocavity to induce an interference effect and further enhance the electric field intensity. When a plasmonic tip is placed closely above such a substrate, the electric field intensity of the gap-plasmon mode can further be improved, which is 10 folds stronger than that of the conventional gap-plasmon mode. Further analysis reveals that the enhanced gap-plasmon mode can significantly strengthen the optical force exerted on a nanoparticle and stably trap a 4-nm-diameter dielectric nanoparticle. Our proposed method can improve the performance of tip-enhanced spectroscopy, plasmonic tweezers and extend their applications. We anticipate that our methods allow simultaneously manipulating and characterizing single nanoparticles in-situ.

The linear polarized (LP) mode multiplexer based on the inverse designed multi-plane light conversion (MPLC) has the advantages of low insertion loss and low mode crosstalk. However, the multiplexer also requires the fabrication and alignment accuracy in experiments, which have not been systematically analyzed. Here, we perform the error tolerance analysis of the MPLC and summarize the design rules for the LP mode multiplexer/demultiplexer. The error tolerances in the fabrication process and experimental demonstration are greatly released with proper parameters of the input/output optical beam waist, the pitch of optical beam array, and the propagation distances between the phase plane. To proof this design rule, we experimentally demonstrate the LP mode multiplexer generating LP01, LP11a, LP11b, LP21 modes and coupling to the few mode fiber, with the insertion loss lower than -5 dB. The LP modes are demultiplexed by MPLC, with the crosstalk of different mode groups lower than -10 dB. LP modes carrying 10 Gbit/s on-off keying signals transmit in a 5 km few mode fiber. The measured bit error rates (BER) curves of the LP01, LP11a, LP21 modes have the power penalties lower than 12 dB.

Strong coupling between the resonant modes can give rise to many resonant states, enabling the manipulation of light-matter interactions with more flexibility. Here, we theoretically propose a coupled resonant system where an anisotropic borophene localized plasmonic (BLP) and Bloch surface wave (BSW) can be simultaneously excited. This allows us to manipulate the spectral response of the strong BLP-BSW coupling with exceptional flexibility in the near infrared region. Specifically, the strong longitudinal BLP-BSW coupling occurs when the system is driven into the strong coupling regime, which produces two hybrid modes with a large Rabi splitting up to 124 meV for borophene along both x- and y-directions. A coupled oscillator model is employed to quantitatively describe the observed BSW-BLP coupling by calculating the dispersion of the hybrid modes, which shows excellent agreement with the simulation results. Furthermore, benefited from the angle-dependent BSW mode, the BSW-BLP coupling can be flexibly tuned by actively adjusting the incident angle. Such active tunable BLP-SBW coupling with extreme flexibility offered by this simple layered system makes it promising for the development of diverse borophene-based active photonic and optoelectronic devices in the near infrared region.

Light modulation has been recognized as one of the most fundamental operations in photonics. In this paper, we theoretically designed a Bloch surface wave assisted modulator for the active modulation of graphene electro-absorption. Simulations show that the strong localized electrical field generated by Bloch surface waves can significantly enhance the graphene electro-absorption up to 99.64%. Then by gate-tuning the graphene Fermi energy to transform graphene between a lossy and a lossless material, electrically switched absorption of graphene with maximum modulation depth of 97.91% can be achieved. Meanwhile, by further adjusting the incident angle to tune the resonant wavelength of Bloch surface waves, the center wavelength of the modulator can be actively controlled. This allows us to realize the active modulation of graphene electro-absorption within a wide near-infrared region, including the commercially important telecommunication wavelength of 1550 nm, indicating the excellent performance of the designed modulator via such mechanism. Such Bloch surface waves assisted wavelength-tunable graphene electro-absorption modulation strategy opens up a new avenue to design graphene-based selective multichannel modulators, which is unavailable in previous reported strategies that can be only realized by passively changing the structural parameters.

This work presents an artificial intelligence enhanced orbital angular momentum (OAM) data transmission system. This system enables encoded data retrieval from speckle patterns generated by an incident beam carrying different topological charges (TCs) at the distal end of a multi-mode fiber. An appropriately trained network is shown to support up to 100 different fractional TCs in parallel with TC intervals as small as 0.01, thus overcoming the problems with previous methods that only supported a few modes and could not use small TC intervals. Additionally, an approach using multiple parallel neural networks is proposed that can increase the system’s channel capacity without increasing individual network complexity. When compared with a single network, multiple parallel networks can achieve the better performance with reduced training data requirements, which is beneficial in saving computational capacity while also expanding the network bandwidth. Finally, we demonstrate high-fidelity image transmission using a 16-bit system and four parallel 14-bit systems via OAM mode multiplexing through a 1-km-long commercial multi-mode fiber (MMF).

Waveguide optical tweezers can capture and transport nanoparticles, and have important applications in biology, physics, and materials science. However, traditional waveguide optical tweezers need to couple incident light into one end of the waveguide, which causes problems such as difficulty in alignment and low efficiency. Here, we propose a new type of waveguide optical tweezers based on spin-orbit coupling of light. Under the effect of spin-orbit coupling between the waveguide and nearby particles illuminated by a circularly polarized light, the particles experience a lateral recoil force and a strong optical gradient force, which make particles in a large area to be trapped near the waveguide and then transmitted along the waveguide, avoiding the coupling of light into one end of the waveguide. We further demonstrate that the particles can be transmitted along a curved waveguide and even rotated along a ring-shaped waveguide, and its transmission direction can be simply switched by adjusting the spin polarization of incident light. This work has significance in the research of optical on-chip nano-tweezers.

Tip-enhanced Raman spectroscopy (TERS) is a promising label-free super-resolving imaging technique, and the electric field gradient of nanofocusing plays a role in TERS performance. In this paper, we theoretically investigated the enhancement and manipulation of the electric field gradient in a bottom-illumination TERS configuration through a tightly focused perfect radially polarized beam (PRPB). Improvement and manipulation in electric field enhancement and field gradient of the gap-plasmon mode between a plasmonic tip and a virtual surface plasmons (SPs) probe are achieved by adjusting the ring radius of the incident PRPB. Our results demonstrate that the method of optimizing the ring radius of PRPB is to make the illumination angle of incident light as close to the surface plasmon resonance (SPR) excitation angle as possible. Under the excitation of optimal parameters, more than 10 folds improvement of field enhancement and 3 times of field gradient of the gap-plasmon mode is realized compared with that of the conventional focused RPB. By this feat, our results indicate that such a method can further enhance the gradient Raman mode in TERS. We envision that the proposed method, to achieve the dynamic manipulation and enhancement of the nanofocusing field and field gradient, can be more broadly used to control light-matter interactions and extend the reach of tip-enhanced spectroscopy.

With the nanoscale integration advantage of near field photonics, controllable manipulation and transportation of micro-objects have possessed plentiful applications in the fields of physics, biology and material sciences. However, multifunctional optical manipulation like controllable transportation and synchronous routing by nano-devices are limited and rarely reported. Here we propose a new type of Y-shaped waveguide optical conveyor belt, which can transport and route particles along the structured waveguide based on the plasmonic spin-hall effect. The routing of micro-particles in different branches is determined by the optical force components difference at the center of the Y junction along the two branches of the waveguide. The influence of light source and structural parameters on the optical forces and transportation capability are numerically studied. The results illustrate that the proposed structured waveguide optical conveyor belt can transport the microparticles controllably in different branches of the waveguide. Due to the selective transportation ability of microparticles by the 2D waveguide, our work shows great application potential in the region of on-chip optical manipulation.

Metasurfaces offer diverse wavefront control by manipulating amplitude, phase, and polarization of light which is beneficial to design subwavelength scaled integrated photonic devices. Metasurfaces based tunable circular polarization (CP) beam splitting is one functionality of interest in polarization control. Here, we propose and numerically realize metasurface based spin tunable beam splitter which splits the incoming CP beam into two different directions and tune the splitting angles by switching the handedness of incident light polarization. The proposed design approach has potential in applications such as optical communication, multiplexing, and imaging.

The orbital angular momentum (OAM) of light has important applications in a variety of fields, including optical communication, quantum information, super-resolution microscopic imaging, particle trapping, and others. However, the temporal properties of OAM in ultrafast pulses and in the evolution process of spin-orbit coupling has yet to be revealed. In this work, we theoretically studied the spatiotemporal property of time-varying OAM in the tightly focused field of ultrafast light pulses. The focusing of an incident light pulse composed of two time-delayed femtosecond sub-pulses with the same OAM but orthogonal spin states is investigated, and the ultrafast dynamics of OAM variation during the focusing process driven by the spin-orbit coupling is visualized. Temporal properties of three typical examples, including formation, increase, and transformation of topological charge are investigated to reveal the non-uniform evolutions of phase singularities, local topological charges, self-torques, and time-varying OAM per photon. This work could deepen the understanding of spin-orbit coupling in time domain and promote many promising applications such as ultrafast OAM modulation, laser micromachining, high harmonic generation, and manipulation of molecules and nanostructures.

In recent years, singular optical beams, including optical vortex (OV) beams with phase singularities and cylindrical vector beams (CVBs) with polarization singularities, have brought new degrees of freedom for many applications. Although there have been various microscale devices for OV detection, the detection of CVBs with a microscale device is still a challenge. Here, we propose a new method for detection of CVBs with a designed on-chip plasmonic spin-Hall metalens structure. The focal position of the metalens and the splitting effect of at focus are studied in both an analytical model and numerical simulation. The results demonstrate that the metalens can not only detect different polarization orders of incident CVBs but also have an ability to distinguish radial, azimuthal and other vectorial polarization states under the same order of CVBs. This method has potential applications in compact integrated optical communication and processing systems.

Surface plasmon polariton (SPP) provides an important platform for the design of various nanophotonic devices. However, it is still a big challenge to achieve spatiotemporal manipulation of SPP under both spatially nanoscale and temporally ultrafast conditions. Here, we propose a method of spatiotemporal manipulation of SPP pulse in a plasmonic focusing structure illuminated by a dispersed femtosecond light. Based on dispersion effect of SPP pulse, we achieve the functions of dynamically controlled wavefront rotation in SPP focusing and redirection in SPP propagation within femtosecond range. The influences of structural parameters on the spatiotemporal properties of SPP pulse are numerically studied, and an analytical model is built to explain the results. The spatiotemporal coupling of modulated SPP pulses to dielectric waveguides is also investigated, demonstrating an ultrafast turning of propagation direction. This work has great potential in applications such as on-chip ultrafast photonic information processing, ultrafast beam shaping and attosecond pulse generation.

High-refractive-index nanoparticles (NPs), such as silicon NPs, were considered as effective carriers in their response to a magnetic field at optical frequencies. Such NPs play an important role in many state-of-the-art technologies in nano-optics. Although the resonance properties of these NPs when varying their structural parameters have been studied intensely in the past few years, their interaction with the underlying substrate has seldom been discussed, in particular, when the substrate is a waveguide structure that significantly modulates the optical responses of the NPs. We proposed and studied a selective magnetic coupling system comprising a Si–NP on a metal-dielectric waveguide (MDW). The MDW structure supports either a transverse electric (TE) or a transverse magnetic (TM) mode that induces a large polarization dependence in the magnetic resonance. A new manifestation of the optical spin Hall effect was demonstrated in which a vertical rotating magnetic dipole excites a TE-type waveguide mode with a specific unidirectional emission. Making use of this polarization response, we developed a scanning imaging system that can selectively map the transverse or longitudinal magnetic field component of a focused beam depending on the type of MDW used in the system. This selective magnetic resonance coupling system is expected to be valuable for studying the fundamental interactions between the magnetic field and matter and for developing related nano-applications.

Two novel visual cryptography (VC) schemes are proposed by combining VC with single-pixel imaging (SPI) for the first time. It is pointed out that the overlapping of visual key images in VC is similar to the superposition of pixel intensities by a single-pixel detector in SPI. In the first scheme, QR-code VC is designed by using opaque sheets instead of transparent sheets. The secret image can be recovered when identical illumination patterns are projected onto multiple visual key images and a single detector is used to record the total light intensities. In the second scheme, the secret image is shared by multiple illumination pattern sequences and it can be recovered when the visual key patterns are projected onto identical items. The application of VC can be extended to more diversified scenarios by our proposed schemes.

Graphene exhibits extraordinary opto-electronic properties due to its unique dynamic conductivity, bringing great value in optical sensing, surface plasmon modulation and photonic devices. Based on the polarization-sensitive absorption of graphene working at near infrared to ultraviolet wavelengths, we theoretically investigate the refractive index sensing and imaging mechanism under oblique and tight focusing incidences of light respectively. We demonstrate that such graphene-based methods can provide ultrahigh refractive index resolution (∼2.09×10−8 RIU) for label-free sensing, and high transverse spatial resolution (∼200 nm) and large longitudinal detecting length (∼750 nm) for imaging under 532 nm incident wavelength. The proposed methods could potentially guide future researches in graphene optical detection, non-invasive biological sensing and imaging, and other applications.

With growing data demands, the capacity of the single-mode fiber will reach its limit. Cylindrical vector beams (CVBs) as the eigenmodes of fiber have been demonstrated to increase the capacity in multiplexing optical communication. As a key component of CVB multiplexing, the sorter based on spin-dependent optical geometric transformation has the advantages of high efficiency and a large channel number. However, the demonstrated spatial resolution of the CVB sorter was not sufficient to separate the adjacent CVB orders. Therefore, there were still serious crosstalk issues for the CVB multiplexing channels. Here, we propose and demonstrate the high-resolution CVBs sorting by introducing fan-out structures in the spin-dependent optical geometric transformation. The crosstalk among the CVBs are suppressed compared with the original design. In addition, a cylindrical lens is used to modify the output beams to Gaussian shape. We experimentally demonstrate the sorting of 4 coaxial CVB channels to standard multimode fiber array. In the numerical modeling, we also design the CVB sorter for free space to integrated waveguide array demultiplexing.

Highly confined electromagnetic fields play a significant role in modern nano-optics, among which surface plasmon polaritons (SPPs) are outstanding because of their subwavelength and enhancement nature. While many state-of-the-art methods have been proposed to uncover the field distribution of SPPs, it still faces challenge to map the weak transverse field component (the field tangential to the interface) of SPPs with high contrast and precision. We propose a direct imaging technique, which employs a dielectric-nanoparticle-on-metal-film (DNP-MF) structure as a near-field probe, to overcome this difficulty. The angular distribution of the scattering radiation from the structure is strongly polarization dependent. By extracting the scattering signals that are mainly induced by the horizontal polarization, the imaging of the weak plasmonic transverse field with high precision can be achieved. The mappings of SPPs distributions excited by various vector beams were performed in experiment, which accord excellent with theory. This technique provides a new approach for near-field imaging with high contrast and reliability, which is expected to be valuable for studying the vectorial features of SPPs such as transverse spin, spin-orbit interactions, etc.

Structured illumination microscopy (SIM) is a powerful super-resolved imaging technique which enables to perform fast and in vivo imaging of bio-samples. In order to achieve a better resolution of a SIM system, evanescent waves with larger in-plane wave-vector are preferred for SIM, among which the total internal reflection (TIRF-SIM) and the plasmonic SIM (pSIM) configurations are widely studied. Here, we demonstrated a metal-dielectric waveguide (MDW) based SIM system - termed as MDW-SIM, which can achieve a good compromise between TIRF-SIM and pSIM. The MDW can support a low-loss waveguide mode at an aqueous environment, with an evanescent tail existing above the water/dielectric interface for SIM. A proof-of-concept imaging experiment was performed on fluorescent beads, where a spatial resolution of 86nm was achieved at a 473nm illumination wavelength and a 1.45 numerical aperture objective lens. The proposed MDW-SIM has a great potential for the bio-imaging applications.

In single-pixel imaging (SPI), a large number of illuminations is usually required to capture one single image. Consequently, SPI may only achieve a very low frame rate for a fast-moving object and the reconstructed images are contaminated with blur and noise. In previous works, some attempts are made to perform motion estimation between neighboring frames in a SPI video to enhance the image quality. However, the motion estimation and quality enhancement from one single image frame in dynamic SPI was seldom investigated. In this work, it assumed that some prior knowledge about the type of motion the object undergoes is known. A motion model of the target object is constructed and the motion parameters can be optimized within a search space. Our proposed scheme is different from common motion deblur techniques for photographs since the motion blur mechanism in SPI is significantly different from a conventional camera. Experimental results demonstrate that the reconstructed images with our proposed scheme in dynamic SPI have much better quality.

Surface plasmon optical tweezers based on micro- and nano-structures are capable of capturing particles in a very small spatial scale and have been widely used in many front research fields. In general, distribution of optical forces and potential wells exerted on the particles can be modulated by controlling the geometric parameters of the structures. However, these fabricated structures are irreversible once processed, which greatly limits its application in dynamic manipulation. The plasmonic field in these structures can be enhanced with orders of magnitude compared to the excitation light, offering a possibility to stimulate nonlinear responses as a new degree of freedom for dynamic modulation. Here, we theoretically demonstrate that the optical force and potential well can be modulated on account of the nonlinear Kerr effect of a gold bowtie structure under a pulsed laser with high peak power. The results verify that the trapping states, including the position, width, and depth of the potential well, can be dynamically modulated by changing intensity of the incident laser. It provides an effective approach for stable trapping and dynamic controlling of particles on nanostructure-based plasmonic trapping platforms and thus has great application potential in many fields, such as enhanced Raman detection, super-resolution imaging, and optical sensing.

Metasurfaces, the promising artificial micro-nano structures with the ability to manipulate the wavefront of light, have been widely studied and reported in recent years. However, dynamic control of the wavefront using dielectric metasurfaces remains a great challenge. Here, unlike the previously reported reconfigurable metasurfaces that offer only binary functions or limited switchable states, we propose and numerically demonstrate an active dielectric metasurface with the metamolecule unit-cell design that enables full-range phase or amplitude tuning in the telecommunications band using the phase-change material Ge2Sb2Se4Te1 (GSST). Selective control of the phase transition of each GSST nanopillar in the metamolecule allows multi-level modulation of the phase and amplitude of the light to be achieved. The functionalities of the structure are validated through the generation of optical vortices, phase-only hologram, and pure amplitude modulation. Benefiting from its dynamic wavefront control capability, the proposed metasurface offers major potential for use in future applications including complex beam steering, optical communications, 3D holograms, and displays.

Spin-orbit interactions are inherent in many basic optical processes in anisotropic and inhomogeneous materials, under tight focusing or strong scattering, and have attracted enormous attention and research efforts. Since the spin-orbit interactions depend on the materials where they occur, the study of the effects of materials on the spin-orbit interactions could play an important role in understanding and utilizing many novel optical phenomena. Here, we investigate the effect of negative-index material on the spin-orbit interactions in a plasmonic lens structure in the form of a circular slot in silver film. Numerical simulations are employed to study the influence of the negative-index material on the plasmonic vortex formation and the plasmonic focusing in the structure under circularly polarized excitations bearing different orbital angular momentum. We reveal that the presence of negative-index material leaves the plasmonic vortex field distribution and the corresponding topological charge unaltered during the spin-to-orbital angular momentum conversion, whereas reverses the rotation direction of in-plane energy flux of the plasmonic vortex and shifts the surface plasmon polariton focus position to the opposite direction compared to the case without negative-index material. This work will help further the understanding of the regulation of optical spin-orbital interactions by material properties and design optical devices with novel functions.

Near-field scanning optical microscopy (NSOM) is a powerful tool for study of the nanoscale information of objects by measuring their near-field electric field distributions. The near-field probe, which determines NSOM system performance, can be either a scattering-type or an aperture-type. Both types have strengths and weaknesses. Here we propose and study a surface plasmon-coupled type nano-probe, which works as a hybrid scheme and could potentially combine the advantages of the two NSOM probe types. The key element of the proposed probe is a nanoparticle-on-film structure designed on a tapered fiber tip. On the one hand, the probe can yield the signals scattered in the near field by a nanoparticle with a scattering mechanism; on the other hand, the scattered signals can be transmitted by the metal film and coupled into the fiber via surface plasmon coupled emission, thus providing a collection mode similar to an aperture-type NSOM. This will lead to signal enhancement, while greatly suppressing background noise. This surface plasmon-coupled nano-probe thus has great potential for near-field optical microscopy applications.

Optical forces in optical tweezers enable non-contact, non-destructive trapping and manipulation of particles. One such force has been found to originate from the spin-orbit coupling of light, which produces a counter-intuitive lateral optical force on metal nanoparticles due to the spin of the electric-field components of light. Here we reveal that the spin-orbit coupling of the magnetic-field components of light also produces a lateral optical force on particles. To study this lateral force, we designed a gapped structure composed of a dielectric particle near photonic crystal surface, and found that the lateral force originates from the spin-dependent excitation of a Bloch surface wave. We further demonstrate that the lateral force can be modified by tuning the structural parameters of the gapped structure and by exploiting the magnetic resonance modes of the particle. This work should contribute to a deeper understanding of the magnetic spin-orbit coupling between light and matter and promote the development of particle manipulation on dielectric platforms.

Space-based optical encryption (SBOE) and double random polarization encoding (DRPO) are previously considered to be more secure than common random-phase-encoding-based optical cryptosystems. The known-plaintext attack (KPA) to SBOE and DRPO was seldomly investigated in the past. A matrix regression approach based on training samples is proposed in this paper to crack these two optical cryptosystems. The relationship between plaintexts and ciphertexts is directly modeled by a complex-amplitude weighting matrix, which is optimized by a gradient descent algorithm. This approach has a simple model compared with deep learning and the KPA can be implemented without recovering the exact key. Our proposed KPA schemes reveal the security flaws of SBOE and DRPO, as well as other linear optical cryptosystems.

We investigate the spin properties of a family of cylindrical vector vortex beams under a focusing condition. The spin-orbit interaction is demonstrated by comparing the energy flow and spin flow density of the focused field to those of the incident field. This spin-orbit interaction is analyzed to construct the desired distribution of spin angular momentum for optical manipulation. The structured spin angular momentum of the focused field can transfer to the optical torque for the non-magnetic absorptive particle. The influences of polarization topological charge, vortex topological charge and wavelength on optical torque in the hot-spot of focused field are summarized for three typical particles. Such results may be exploited in practical optical manipulation, particularly for optically induced rotations.

Optical cages attract considerable attentions recently owing to their potential applications in optical trapping, optical imaging and optical cloaking. However, the generation of tunable optical cage arrays in the transverse plane comes to a great challenge, which restricts the effectiveness of the above applications. In this work, we propose a full polarization-controlled method that optical cage arrays with tunable number and positions in the x-y plane can be generated by a so-called Dammann vector beam (DVB), both under the conditions of high- and low-NA focusing system. By adjusting the polarization state of the DVB with the phase of Dammann grating, the number and positions of optical cages can be adjusted flexibly. This work reveals the relationship between the complex polarization state of an incident vector beam and the output optical cage array in the focal region, and may find valuable applications in optical imaging, optical trapping, etc.

Passive radiative cooling, which pumps heat to outer space via thermal radiation, has been a promising energy free technology to maintain the earth surface temperature. Nighttime radiative cooling technology is quite mature, while daytime radiative cooling still poses many challenges due to the requirement of minimization of incident solar absorption and maximization of the mid-infrared emissivity in the atmospheric transparency windows. However, the mid-infrared emissivity efficiency of natural materials is usually poor, providing a low cooling efficiency and the realization of a high performance daytime radiative cooler is still quite challenge. In this work, we design and numerically investigate a three dimensional (3D) all-dielectric pyramidal multilayer metamaterial (PMM), which not only avoids the problem of high absorptivity loss of metal materials to solar, but also provide extremely high infrared absorptivity due to the attenuation effect of moth-eye structure and the electromagnetic resonant absorption in the metamaterial, achieving the purpose of both extremely low solar spectrum absorption and strong infrared emissivity within the atmospheric windows under the direct sunlight. Eventually, our designed cooler presents the potential to achieve a net radiative cooling power exceeding 156 W/m2 at ambient temperature of 300 K under direct solar irradiation, leading to a temperature reduction of 42.4°C. At nighttime, the net cooling power is more than 199 W/m2 at ambient temperature, resulting in a temperature reduction of 58.5°C. Even considering the non-radiative heat exchange conditions, this metamaterial cooler can still cool down 9.6°C at the daytime and 12.3°C at the nighttime respectively. Therefore, this work further promotes the development of all-dielectric metamaterial based passive radiative coolers and is of great significance for energy conservation.

Bloch surface wave (BSW) can be considered as the dielectric analogue of surface plasmon polariton (SPP) with less loss since it is sustained at the surface of a truncated dielectric multilayer. As dielectric materials show nearly no ohmic loss, BSW can propagates much farther compared to SPP, and thus is beneficial for planar optical devices. In this paper, we study the spin-orbital interaction between incident beam and BSW. We demonstrate that due to the spin-orbital coupling, the near-field properties of generated BSW can be controlled with a meta-antenna structure. The meta-antenna is composed of two gold nano-antennas oriented at 45° and 135° as a near-field coupler. By careful design of the meta-antenna, the generated BSW can be guided and focused depending on the chirality of the incident beam. Three examples of meta-antennas are demonstrated for chiral sensitive focusing, directional switching and asymmetric focusing. The proposed method can be applied as a design method for low-loss on-chip photonic devices.

Structured illumination microscopy (SIM) is a powerful super-resolved imaging technique which enables to perform fast and in vivo imaging of bio-samples. In order to achieve a better resolution of a SIM system, evanescent waves with larger in-plane wave-vector are preferred for SIM, among which the total internal reflection (TIRF-SIM) and the plasmonic SIM (pSIM) configurations are widely studied. Here, we demonstrated a metal-dielectric waveguide (MDW) based SIM system - termed as MDW-SIM, which can achieve a good compromise between TIRF-SIM and pSIM. The MDW can support a low-loss waveguide mode at an aqueous environment, with an evanescent tail existing above the water/dielectric interface for SIM. A proof-of-concept imaging experiment was performed on fluorescent beads, where a spatial resolution of 86nm was achieved at a 473nm illumination wavelength and a 1.45 numerical aperture objective lens. The proposed MDW-SIM has a great potential for the bio-imaging applications.

It is well known that radially polarized beam could produce an ultra-long longitudinally polarized focus, referred to as "optical needle". In this work, we reveal that the counterpart transversely polarized optical needle (~5.83λ) with exceptionally suppressed sidelobes (9.9% of the maximum of the principal lobe) can be generated by tightly focusing a hybridly polarized beam through a multibelt binary phase filter. A universal analytical model is built up for investigating the depth, uniformity and polarization properties of the needle. We find that there is a trade-off between needle length and intensity uniformity, and the main lobe keeps almost transverse polarization at each observation plane. Such a nondiffraction transversely polarized optical needle has potential applications in ultrahigh density magnetic storage as well as atomic trap and switches.

We suggest a plasmonic nanodevice for performing the second-order spatial derivative of light fields. The device consists of five gold nanorods arranged to evanescently couple to each other so that emit cross-polarized output proportional to the second-order differentiation of the incident wave. A theoretical model based on the electrostatic eigenmode analysis is derived and numerical simulations using the finite-difference time-domain methods are provided as supporting evidence. It is shown in both the analytic and numerical methods that the proposed plasmonic circuit performs second-order differentiation of the phase of the incident light field in transmission mode with a subwavelength planar resolution. The resolution of 0.29 lambda(-1) is numerically demonstrated for a 20 nm thick circuit at the wavelength of 700 nm. The suggested plasmonic device has potential application in miniaturized systems for all-optical computation. Refereed/Peer-reviewed

In this paper, we develop an analytic theory for describing the photoacoustic wave generation from a spheroidal droplet and derive the first complete analytic solution. Our derivation is based on solving the photoacoustic Helmholtz equation in spheroidal coordinates with the separation-of-variables method. As the verification, besides carrying out the asymptotic analyses which recover the standard solutions for a sphere, an infinite cylinder and an infinite layer, we also confirm that the partial transmission and reflection model previously demonstrated for these three geometries still stands. We expect that this analytic solution will find broad practical uses in interpreting experiment results, considering that its building blocks, the spheroidal wave functions (SWFs), can be numerically calculated by the existing computer programs.

The phase of graphene plasmon upon edge-reflection plays a crucial role on determining the spectral properties of graphene structures. In this article, by using the full-wave simulation, we demonstrate that the mid-infrared graphene plasmons are nearly totally reflected at the boundary together with a phase jump of approximately 0.27π, regardless of the environments surrounding it. Appling this phase pickup, a Fabry-Perot model is formulated that can predict accurately the resonant wavelengths of graphene nano-ribbons. Furthermore, we find that the magnitude of the phase jump will either increase or reduce when two neighboring coplanar graphene sheets couple with each other. This could be used to explain the red-shift of resonant wavelength of periodic ribbon arrays with respect to an isolated ribbon. We provide a straightforward way to uncover the phase jump of graphene plasmons that would be helpful for designing and engineering graphene resonators and waveguides as well as their associated applications.

Space-division multiplexing allows unprecedented scaling of bandwidth density for optical communication. Routing spatial channels among transmission ports is critical for future scalable optical network, however, there is still no characteristic parameter to label the overlapped optical carriers. Here we propose a free-space optical flow routing (OFR) scheme by using optical orbital angular moment (OAM) states to label optical flows and simultaneously steer each flow according to their OAM states. With an OAM multiplexer and a reconfigurable OAM demultiplexer, massive individual optical flows can be routed to the demanded optical ports. In the routing process, the OAM beams act as data carriers at the same time their topological charges act as each carrier's labels. Using this scheme, we experimentally demonstrate switching, multicasting and filtering network functions by simultaneously steer 10 input optical flows on demand to 10 output ports. The demonstration of data-carrying OFR with nonreturn-to-zero signals shows that this process enables synchronous processing of massive spatial channels and flexible optical network.

We theoretically demonstrate the generation and detection of broadband multi-channel Orbital Angular Momentum(OAM) by a micrometer-scale meta-reflectarray. The meta-reflectarray composed of patterned silicon bars on a silver ground plane can be designed to realize phase modulation and work as chip-level OAM devices. Compared to traditional methods of OAM generation and detection, our approach shows superiorities of very compact structure size, broadband working wavelength (1250-1750 nm), high diffraction efficiency (~70%), simultaneously handling multiplex OAMs, and tunable reflection angle (0-45°). These fascinating advantages provides great potential applications in photonic integrated devices and systems for high-capacity and multi-channel OAM communication.

We propose a method for enhancing depth-of-field, in which the spot size on a marginal depth plane is reduced. This method is implemented in a projection-type integral imaging system using a negative lens array without a diffuser. Numerical simulation results show that the spot size is merely 5.7% of that in a conventional system. Thus, the depth-of-field in the proposed system is enhanced by 17.5 times over that in a conventional system. Optical experiments confirm good agreement between the results and numerical predictions.

We demonstrate an all-optical plasmonic structured illumination microscopy (PSIM) technique. A set of plasmonic standing-wave patterns is excited by amplitude-modified optical vortices (OVs), which have fractional topological charges for precise phase shift of {-2π/3, 0, 2π/3}. A specially designed optical aperture is introduced to modify the OVs in order to improve the uniformity of interference patterns. The imaging results of fluorescent beads reveal a sub-100nm resolving capability in aqueous environment. This PSIM technique as a structure-free, wide-field and super-resolved imaging technique is of great potential for low-cost biological dynamic imaging applications.

The hydrodynamic theory is a powerful tool to study the nonlocal effects in metallic nanostructures that are too small to obey classical electrodynamics while still too large to be handled with a full quantum-mechanical theory. The existing hydrodynamic model can give accurate quantitative predictions for the plasmonic resonance shifts in metallic nanoplasmonics, yet is not able to predict the spectral width which is usually taken as a pre-set value instead. By taking account the fact that due to electron density spill-out from a surface, the Coulomb interaction screening is less efficient close the surface thus leads to a higher electron-electron scattering rate in this paper, we study how the electron-density-related damping rate induced by such Coulomb interaction will affect the plasmonic spectral broadening. We perform the simulation on a Na nanowire, which shows that the absorption spectra width is wider when the size of the nanowire becomes smaller. This result is consistent well with the reported experiment. Therefore, our theoretical model extends the existing hydrodynamic model and can provide much more quantum insight about nonlocal effects in metallic nanostructures.

A new real-time integral imaging pick-up and display method is demonstrated. This proposed method utilizes the dual-camera optical pick-up part to collect 3D information of real scene in real-time without pre-calibration. Elemental images are then provided by a computer-generated integral imaging part and displayed by a projection-type integral imaging display part. The theoretical analysis indicates the method is robust to the camera position deviation, which profits the real-time data processing. Experimental results show that the fully continuous, real 3D scene pick-up and display system is feasible with a throughput of 8 fps in real time. Further analysis predicts that the parallel optimization can be adopted by the proposed method for real-time 3D pick-up and display with a throughput of 25 fps.

Novel hybrid-polarized vector beams with radial and azimuthal polarization states in arbitrary fan-sectors are generated and studied for manipulating surface plasmon polaritons (SPPs). The method has high energy conversion efficiency based on an interferometric arrangement with a Dammann vortex phase grating. The polarization states of generated beams are measured by a linear polarizer and show excellent agreement with theoretical predictions. The manipulation properties of the hybrid-polarized beams on SPPs excitation and distribution are demonstrated by both experiments and simulations. The results show that focusing or standing wave patterns of SPPs can be obtained depending on the polarization of the beams. Published version

We report an approach to the increase of signal channels in free-space optical communication based on composed optical vortices (OVs). In the encoding process, conventional algorithm employed for the generation of collinearly superimposed OVs is combined with a genetic algorithm to achieve high-volume OV multiplexing. At the receiver end, a novel Dammann vortex grating is used to analyze the multihelix beams with a large number of OVs. We experimentally demonstrate a digitized system which is capable of transmitting and receiving 16 OV channels simultaneously. This system is expected to be compatible with a high-speed OV multiplexing technique, with potentials to extremely high-volume information density in OV communication.

Manipulation of surface plasmon polaritons (SPP) by phase modulation of incident light beams is proposed with analytical and numerical verifications when an optical vortex (OV) beam is employed as an example. Fundamental functionalities of a plasmonic chip such as in-plane focusing, coupling and multiplexing of SPP by sequentially varying the topological charge of OV beam are demonstrated. Complementary to the manually-controlled optical-path-different technique reported in literature, the proposed method reveals a direct phase transform from OV beam to SPP with dynamic and reconfigurable advantages.

A negative-tone sensitive SiO2/TiO2 organic-inorganic hybrid sol-gel material was synthesized and characterized for fabrication of multilevel micro-optical elements by direct electron-beam lithography. The exposure was carried out by an in-house modified electron-beam writing system using LEO SEM-982 with Elphy Quantum exposure beam-blanking control system at 25keV. The hybrid Sol-Gel material demonstrated a superb sensitivity for doses between 0.22microC/cm2 and 0.33microC/cm2.