Search

This study addresses the challenge of enhancing the transverse mechanical properties of oriented polyacrylonitrile (PAN) nanofibers, which are known for their excellent longitudinal tensile strength, without significantly compromising their inherent porosity, which is essential for effective filtration. This study explores the effects of doping PAN nanofiber composites with varying concentrations of polyvinyl alcohol (PVA) (0.5%, 1%, and 2%), introduced into the PAN matrix via a dip-coating method. This approach ensured a random distribution of PVA within the nanofiber mat, aiming to leverage the synergistic interactions between PAN fibers and PVA to improve the composite's overall performance. This synergy is primarily manifested in the structural and functional augmentation of the PAN nanofiber mats through localized PVA agglomerations, thin films between fibers, and coatings on the fibers themselves. Comprehensive evaluation techniques were employed, including scanning electron microscopy (SEM) for morphological insights; transverse and longitudinal mechanical testing; a thermogravimetric analysis (TGA) for thermal stability; and differential scanning calorimetry (DSC) for thermal behavior analyses. Additionally, a finite element method (FEM) analysis was conducted on a numerical simulation of the composite. Using our novel method, the results demonstrated that a minimal concentration of the PVA solution effectively preserved the porosity of the PAN matrix while significantly enhancing its mechanical strength. Moreover, the numerical simulations showed strong agreement with the experimental results, validating the effectiveness of PVA doping in enhancing the mechanical properties of PAN nanofiber mats without sacrificing their functional porosity. [ABSTRACT FROM AUTHOR]

This study focuses on the mechanical properties of electrospun nanofibrous mats, highlighting the importance of the characteristics of single nanofibers in determining the overall mechanical behavior of the mats. Recognizing the significant impacts of the diameter and structural properties of the nanofibers, this research introduces a novel methodology for deriving the effects of the mechanical properties of single nanofibers on the aggregate mechanical performance of electrospun oriented nanofiber mats. For this purpose, a finite element method (FEM) model is developed to simulate the elastoplastic response of the mats, incorporating the influence of structural parameters on mechanical properties. The validation of the FEM model against experimental data from electrospun polyacrylonitrile (PAN) nanofibers with different orientations demonstrates its effectiveness in capturing the elastic–plastic tensile behaviors of the material and confirms its accuracy in terms of reflecting the complex mechanical interactions within the nanofibrous mats. Through a detailed analysis of how nanofiber diameter, orientation of fibers, length-to-width ratio, and porosity affect the mechanical properties of the mats, this research provides valuable insights for the engineering of nanofibrous materials to meet specific mechanical requirements. These findings improve our understanding of nanofibrous mat structures, allowing for better performance in diverse applications as well as highlighting the critical importance of identifying the properties of single nanofibers and their associated impacts on material design. [ABSTRACT FROM AUTHOR]

The circularity of polymer waste is an emerging field of research in Europe. In the present research, the thermal, surface, mechanical, and tribological properties of polypropylene (PP)-based composite produced by injection molding were studied. The pure PP matrix was reinforced with 10, 30, and 40% wt. of pure cotton, synthetic polyester, and polyethylene terephthalate post-consumer fibers using a combination of direct extrusion and injection molding techniques. Results indicate that PP-PCPESF-10% wt. exhibits the highest value of tensile strength (29 MPa). However, the values of tensile and flexural strain were lowered with an increase in fiber content due to the presence of micro-defects. Similarly, the values of modulus of elasticity, flexural modulus, flexural strength, and impact energy were enhanced due to an increase in the amount of fiber. The PP-PCCF-40% wt. shows the highest values of flexural constant (2780 MPa) and strength (57 MPa). Additionally, the increase in fiber loadings is directly proportional to the creation of micro-defects, surface roughness, abrasive wear, coefficient of friction, and erosive wear. The lowest average absolute arithmetic surface roughness value (Ra) of PP and PP-PCCF, 10% wt., were 0.19 µm and 0.28 µm. The lowest abrasive wear value of 3.09 × 10−6 mm3/Nm was found for pure PP. The erosive wear value (35 mm3/kg) of PP-PCCF 40% wt. composite material was 2 to 17 times higher than all other composite materials. Finally, the single-step analysis of variance predicts reasonable results in terms of the p-values of each composite material for commercial applications. [ABSTRACT FROM AUTHOR]