Search

This paper presents a review of the design parameters, mathematical techniques and simulations used in the design of parabolic trough solar systems, along with a review on their applications. Recent studies that analyze the deployment of solar parabolic trough collectors (SPTC) in different countries and the operational SPTC plants are also presented and discussed. The paper also discusses the different kinds of software and test methods of solar collectors developed since 1981 which can be distinguished by their particular mathematical models or tracking techniques. In particular, since the mathematical models are especially required for the design, analysis, testing and validation of the systems results as they provide an approximation of the dynamic behavior of the physical properties of the system, they are discussed in depth. The mathematical models allow the calculation of different parameters of the solar parabolic trough system, the angle of inclination of the collecting surface and the forces acting on the system. The validity and experimental validation of the major mathematical models on practical solar parabolic trough concentrators, receivers and other components of different dimension are also reviewed. The paper showed the optical efficiency values are close to 63% and the theoretical peak optical efficiency reached 75%. [ABSTRACT FROM AUTHOR]

This paper provides a review of negative carbon capture technologies. Based on these technologies, here it is proposed an innovative negative emissions power plant combining the generation and storage of energy from biomass, photovoltaic, and concentrated solar power, capturing and recovering CO 2 by producing H 2 or CH 4 as green energy carriers. The main features of the system are i) large-scale energy production system with negative CO 2 emissions; ii) 100% renewable system based on biomass and solar energy with the possibility of integrating other renewables; iii) synergistic integration of processes and systems; iv) recovery of O 2 generated by photovoltaic-driven electrolysis within the process of partial biomass oxycombustion and v) solar-driven limestone calcination. A detailed model of the entire plant is developed to evaluate the integration of the process. The model performance is assessed on an hourly basis throughout the whole year. The base case results show an energy consumption from 1 to 2.1 MJ/kg CO 2 to capture 60–77% of CO 2 emitted from the biomass plant and green methane production of more than 7500 tons/year. The negative emissions associated with the process are -612 kg CO 2 /MWh. It justifies the interest in the proposed negative emissions power plant. [Display omitted] • A synergetic integration of CO2 capture, energy storage and methane production is proposed. • A biomass power plant is considered, resulting in -612 kg CO2/MWh negative emissions. • Solar PV and CSP are integrated into the process to reduce the SPECCA to 1–2.1 kg CO2/MWh. • A large amount of solids storage is required to achieve 70–90% CO2 capture capacity. [ABSTRACT FROM AUTHOR]

The utilization of solar energy based technologies has attracted increased interest in recent times in order to satisfy the various energy demands of our society. This paper presents a thorough review of the open literature on solar energy based heat and power plants. In order to limit the scope of the review, only fully renewable plants with at least the production of electricity and heat/hot water for end use are considered. These include solar photovoltaic and solar thermal based plants with both concentrating and non-concentrating collectors in both solar-only and solar-hybrid configurations. The paper also presents a selection of case studies for the evaluation of solar energy based combined heat and power generation possibility in Denmark. The considered technologies for the case studies are (1) solar photovoltaic modules, (2) solar flat plate collectors, (3) a ground source heat pump, (4) a biomass burner, and (5) an organic Rankine cycle. The various cases are compared on the basis of economic profitability and environmental performance. The results from the case studies indicate that it is economically and environmentally beneficial to invest in both small and large capacity solar-biomass hybrid plants for combined heat and power production in the Nordic climatic conditions. The results also suggest that the configuration with an organic Rankine cycle with solar thermal collectors and a biomass burner is particularly attractive for large capacity plants. [ABSTRACT FROM AUTHOR]

The term “polygeneration” is referred to as “an energy supply system, which delivers more than one form of energy to the final user”, for example: electricity, heating/cooling, desalination can be delivered from polygeneration process. The polygeneration demonstrates unique integration of energy efficiency and renewable energy. It is the next generation energy production technique with a potential to overcome intermittence of renewable energy, reduce cost of power generation and greenhouse gas emissions. The feasibility study of this paper is divided in three sections: In first section of this study, solar and biomass have been arranged to produce steam for power generation. In the second section, cooling is produced by vapor absorption refrigeration (VAR; LiBr-H 2 O) system as per demand load requirement using steam, extracted from pass-out turbine. In the last section of this paper, multi effect dehumidification (MED) water desalination is produced by using limited amount of heat from water vapor (refrigerant; H 2 O) through HE1 of VAR cooling system. [ABSTRACT FROM AUTHOR]

Poor air quality from coal combustion adversely impacts human health including mortality and morbidity effects on respiratory, cardiovascular, nervous, urinary, and digestive systems. However, the continued use of coal are no longer necessary to provide for society's electrical needs because of advances in solar photovoltaic (PV) technology. In order to inform health policy this paper reviews the data for quantifying the lives saved by a replacement of U.S. coal-fired electricity with solar PV systems. First the geospatial correlation with coal fired power plants and mortality is determined for the U.S. at the state level. Then, current life cycle mortality rates due to coal combustion are calculated and current energy generation data is collated. Deaths/kWh/year of coal and PV are calculated, and the results showed that 51,999 American lives/year could be saved by transitioning from coal to PV-powered electrical generation in the U.S. To accomplish this, 755 GW of U.S. PV installations are needed. The first costs for the approach was found to be roughly $1.45 trillion. Over the 25 year warranty on the PV modules the first cost per life saved is approximately $1.1 million, which is comparable to the value of a human life used in other studies. However, as the solar electricity has value, the cost per life is determined while including the revenue of the solar electric generation using a sensitivity analysis on the value of the electricity. These results found that for most estimations of the value, saving a life by offsetting coal with PV actually saved money as well, in some cases several million dollars per life. It is concluded that it is profitable to save lives in the U.S. with the substitution of coal-fired electricity with solar power and that the conversion is a substantial health and environmental benefit. [ABSTRACT FROM AUTHOR]

Present day India has tremendous energy requirements, and with each day it is becoming more difficult to meet those needs through conventional power sources. The never-ending demand of population which is growing exponentially has become very tough to fulfill. To enhance its energy security, mitigate carbon emissions and augment its economic development, it becomes an urgent need to implement innovative policies and mechanisms for the adoption of green and clean energy. India because of its demographics has good solar energy potential. This study aims to examine the solar power implementations in thermal power plants situated all across India. This paper contributes to the literature on solar power by identification of barriers for the adoption of solar power in thermal plants. Still, there is some lack of study about solar power implementations in different areas. In this paper, investigating efforts have been made to examine the solar power implementations in thermal power plants within the Indian context by identifying key barriers. In this study, Interpretative Structural Modeling (ISM) has been adopted to find the contextual relationships among key barriers and Matriced'Impacts Croises- Multiplication Applique' an Classment (MICMAC) analysis has been carried out for validation of the model. Requirement of gigantic investment, longer recovery period, safety implications, environmental implications, and societal concerns emerge at the top level in ISM structure. Lack of adequate government policies and lack of political leadership appears at the bottom of a structured model and these emerged as the most influential barriers. This research also suggested how to mitigate the key barriers by the installation of solar power in electricity generation utilities. • Identify and evaluate nineteen barriers which influence the development of solar power in Indian thermal power sector. • Establish ISM hierarchy structure to show the contextual relationships among the barriers. • MICMAC technique is conceded for validation of the established ISM model. • Suggestions are proposed to mitigate the key barriers for the development of solar power in electricity generation utilities. [ABSTRACT FROM AUTHOR]

Concentrating Solar Power (CSP) plants can make a significant contribution to renewable energy supply in many regions of the world. Several bottom-up engineering performance models for CSP plants have been developed. However, they require the capacity of the plant to be known. In whole-of-grid optimization models, the capacity of the plants is an optimization variable and therefore not known in advance. In this case, researchers have taken a simplified modelling approach that overestimated CSP performance, especially for low-DNI conditions. In this paper, we offer a novel density-based engineering modelling approach in which CSP performance is determined independently of the capacity of the power plant, and which can be used in whole-of-grid optimization models. We investigate a case study of the site of the new Aurora CSP project in Port Augusta, South Australia, to be one of the world's largest solar thermal power plants by 2020. Using a Geographical Information System (GIS)-grid representation of Australia, we compare CSP performance resulting from a simplified model with our new approach. • A novel density-based engineering modelling approach for Concentrating Solar Power (CSP) plants. • CSP performance is determined independently of the capacity of the power plant. • The approach can be used in whole-of-grid optimisation models. • We investigate the site of the new Aurora CSP project in Port Augusta, South Australia to be constructed by 2020. • The new approach is compared to the simplified description of CSP performance, using a GIS-grid representation of Australia. [ABSTRACT FROM AUTHOR]