Search

BackgroundBy analyzing the publication of scientific and technological papers of the provincial centers for disease control and prevention (CDCs) in China, we can understand their scientific research strength, dominant disciplines, research hotspots, and talent development, which is conducive for further optimizing the scientific research construction of the disease control system.ObjectiveTo conduct a bibliometric analysis and draw a visual map of the Chinese Science Citation Database (CSCD) sourced papers published by 31 provincial CDCs in China from 2011 to 2020, to understand the scientific research status of China's provincial CDC system in the past ten years.MethodsIn April 2021, China National Knowledge Infrastructure was used to retrieve CSCD sourced papers published by 31 provincial CDCs (excluding Taiwan Province, Hong Kong and Macau Special Administrative Regions) in China as the primary unit from 2011 to 2020, and finally 5231 CSCD papers were included. Bibliometric analysis indicators include number of CSCD papers published and financial support rate, proportion of CSCD papers to total Chinese papers, distribution of CSCD papers published in high-volume journals, and number of papers for a specific CDC that their first authors affiliated with. Citespace 5.8.R1 software was used to draw author's cooperation network map, keyword co-occurrence map, keyword clustering information table, and keyword emergence map.ResultsThe number of CSCD papers published every year showed a stationary trend, and the total funding rate was 61%, showing an year-by-year upward trend (increased from 49.3% in 2011 to 68.7% in 2020). Jiangsu Province, Fujian Province, and Beijing CDCs ranked the top three in the total number of CSCD papers contributed by a specific CDC. The Chinese Journal of Epidemiology, Chinese Journal of Public Health, Chinese Journal of Zoonoses, Chinese Journal of Preventive Medicine, and Chinese Journal of Endemic Diseases were the top five high-volume journals. The top three authors of CSCD papers (counted as co-authors) were Xu Bianli of Henan Provincial Center for Disease Control and Prevention (110 papers), Yan Yansheng of Fujian Provincial Center for Disease Control and Prevention (72 papers), and Wang Quanyi of Beijing Center for Disease Prevention and Control (71 papers), and they studied the epidemiology of parasitic diseases and infectious diseases, the prevention and treatment of natural epidemic diseases and AIDS, and the epidemiology of infectious diseases, respectively. The keyword co-occurrence map showed that AIDS, zoonotic diseases, hand-foot-mouth disease, etc. (frequency ≥90) were the key research directions of provincial CDCs in the past ten years. The keyword clustering categories were closely related, although there were subtle differences, the topics focused on virus and chronic disease research. The keyword emergence results suggested that the frontiers of research had gradually shifted from infectious diseases such as enterovirus, hantavirus, and Zika virus to food-borne diseases and chronic non-communicable diseases such as tumors and senile diseases over time.ConclusionThe number of papers issued by the provincial CDCs in China in the past ten years has shown an overall steady and rising trend. The leading themes of researchers and institutions are infectious diseases, parasitic diseases, etc., while food-borne diseases and elderly diseases are the hot frontiers.

In this paper, 1-methylcyclopropene (1-MCP) controlled release packaging paper was prepared by mixing 1-methylcyclopropene with different proportions of ethyl cellulose ether (EC) and polyacrylic acid (PAA) and then coating it on the paper base. The release mechanism was studied. Saimaiti apricot fruits stored at 2 ℃ were treated with 1-MCP controlled release packaging paper. The effects of 1-MCP controllable slow-release packaging paper on respiratory intensity, hardness, titratable acid, soluble solids, peel color and commodity rate of apricot fruit during storage were studied in order to obtain a kind of fresh-keeping paper which could effectively prolong the storage period of apricot fruit. The results showed that under the conditions of 95% RH, 2 ℃ and 80% polyacrylic acid (PAA), the particle collapse of 1-MCP powder made the gas release slowly, and the release mechanism parameter was 0.49, and the release rate increased with PAA content. Controlled release 1-MCP-coated paper could inhibit the arrival of the peak of respiration intensity of apricot fruit, delay the decrease of hardness, titratable acid and soluble solid content, and maintain the color of peel. The results showed that controlled release 1-MCP-coated paper could effectively maintain the quality of apricot fruits stored in low temperature environment, and would provide some reference for the application of controlled release 1-MCP-coated paper to the storage of other fruits and vegetables.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An experiment designed to predict the lifetime of the Xuan paper using the viscosity method is introduced in the form of group collaboration. This experiment is targeted at junior students who majored in conservation of cultural relics, with eight groups involved. Using a jacketed viscometer, the intrinsic viscosity of the two types of undegraded and degraded Xuan papers was determined, and the corresponding degree of polymerization (DP) was calculated. Then data were collected from all groups, and degradation rates of the papers were then calculated, which were then used to predict the life expectancy of the Xuan papers. The aim was to enhance students’ teamwork skills, practical experience, problem-solving abilities, data analysis, and scientific research capabilities, while also guiding them to apply their chemical knowledge to practical conservation for paper-based objects. [ABSTRACT FROM AUTHOR]

Utilizing the iron-carbon microelectrolysis technology to carry out in-depth treatment of waste paper and pulp wastewater, the optimal process parameters were determined based on single factor experiments. In addition, the response surface methodology was employed to optimize the process parameters by analyzing the experimental results. Under the optimized conditions, the excita1tion-emission-matrix spectra and GC-MS were used to analyze the water quality of the treated wastewater. The results showed that the optimal treatment conditions of iron-carbon microelectroly1sis process were initial pH=3.0, filler addition amount 255g L-1, reaction time 120 min, aeration amount 0.9 L min-1, and the COD removal efficiency was 32. 14% under these conditions; the maximum predicted value of COD removal rate calculated under the optimal process conditions was 34.57% from the response surface analysis, which was basically consistent with the experimental results. The results of excitation-emission-matrix spectra analysis showed that the iron-carbon micro1electrolysis process was effective in degrading humic acid and fulvic acid in waste paper and paper wastewater, and GC-MS analysis showed that the relative content of eicosanoids in wastewater was reduced from 43.31% to 4.79% of the original water after the iron-carbon microelectrolysis treat1ment, but a small amount of new pollutants were generated at the same time. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Capital Institute of Physical Education is the property of Shoudu Tiyu Xueyuan and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Oxidative stress participates in the occurrence of diabetic nephropathy（DN）. Abnormal glucose metabolism will lead to the production of oxygen free radicals, damaging the intrinsic cells of the kidney, affecting the structure and function of renal tissue. Meanwhile, the high glucose-induced oxidative stress inhibits the expression of the antioxidant factor Nrf2, which activation has a protective effect on the kidney of diabetic mice, and can improve the kidney injury at the cellular level. However, the antioxidant mechanism of Nrf2 involved in DN remains unclear. This paper will introduce the role of Nrf2 in regulating oxidative stress at the cellular level to improve renal injury caused by high glucose.

Objective To establish a simple and rapid paper-based extraction method for human papilloma virus (HPV) DNA and to evaluate the method. Methods The plasmid containing HPV type 16 gene fragment was employed as the test subjects, and then 6 different paper materials were compared and selected by ultraviolet spectrophotometry and real-time fluorescence quantitative PCR (qPCR). Then, according to the efficiency of nucleic acid extraction and the optimal binding area, a convenient paper strip was designed. Finally, the designed paper strip was applied to extract HPV DNA from 18 clinical cervical exfoliated cell samples (13 positives and 5 negatives), with its performance being evaluated after comparing with the conventional boiling method. Results The qualitative filter paper with a nucleic acid binding zone of 2 mm×10 mm could successfully extract HPV DNA from clinical cervical exfoliated cells. When this test strip was used for DNA extraction, all the 13 high-risk HPV positives were successfully detected out of the 18 clinical samples, which was consistent with the results of the conventional boiling method. In addition, the extraction time of the test strip was less than 1 min for each sample, with a detection limit of 8×102 copies/mL and relative standard deviation of 1.15%. Conclusion Our paper-based rapid extraction for HPV DNA does not require pipetting, heating and centrifugation, and the eluent can be directly used as the PCR template for amplification, which greatly simplifies the extraction process of HPV DNA from clinical cervical exfoliated cell samples.

With the development of science and technology,people need to access a large number of scientific and technological information quickly,and scientific paper is one of the main ways to carry scientific and technological information.As an important part of scientific paper,abstract is an effective tool for readers to retrieve literature.Therefore,the quality of abstract affects the retrieval rate of paper directly.However,due to the lack of writing experience,the quality of abstracts written by many authors is not high.Automatic generation of summary for scientific paper can help the author grasp the important content of paper more effectively,so as to write high-quality abstract.At the same time,the automatically generated abstract can also control the number of words in the abstract,which can bring more content to readers and help them understand the paper better.Generating automa-tic summarization for scientific paper can help author write abstract faster,which is one of the research contents in automatic summarization.Compared with common news document,scientific paper has the characteristics of strong structure and clear logical relationship.As far as the mainstream abstractive summarization such as encoder-decoder model is concerned,it mainly consi-ders the serialized information in the document,and rarely explores the text structure information in the document.For this reason,according to the characteristics in scientific papers,this paper proposes an automatic summarization model based on the hie-rarchical structure of "word-section-document",which uses the association between word and section to enhance the level of text structure and the interaction between levels,so as to screen out the key information in scientific paper.In addition,a context gate unit is extended to update the optimized context vector,thus capturing context information more comprehensively.The experimental results show that the proposed model can effectively improve the performance of the generated summarization in the ROUGE evaluation method.

Objective: Established a group of models used to quickly distinguish anti-counterfeit cigarette packaging paper. Methods: The model based on the same color oil on packaging paper from 3 different brands: Yunyan, Yuxi, and Hongtashan. The Fourier Transform infrared spectroscopy （FTIR） spectrum were collected from 116 samples totally by Attenuated Total Reflection （ATR） accessary. 56 spectrum were used to build the models and 20 samples of each brand were used to verification. Spectrum were second derivative processed and spectral ranges were selected as 3 200~2 700, 1 800~1 580, and 801~720 cm-1. Results: Using Mahalanobis distance discriminant method to establish 4 models （3 brands and 1 multiple）, all of the accuracy of models reached to 100%. Conclusion: This is the first time to use the same color oil FTIR spectrum to distinguish real and fake cigarette packaging paper which were highly improve selection efficiency for large number of samples.

Objective： A method for simple and rapid determination of potassium content in cigarette paper will be built for workshops of cigarette factory. Methods: An ion-selective electrode method was used by comparing with the pretreatment methods for cigarette paper samples and potential response behaviors of potassium ion-selective electrodes in different buffer solutions. Results: The potassium ion selective electrode possessed excellent response performance for K+ in lithium acetate buffer solution （0.1 mol/L, pH 7.0） with a linear response range of 1.0×10-5 ~1.0×10-2 mol/L, a slope of 55.79 mV/dec （25 ℃）, and a lower limit of detection of 2.14×10-6 mol/L. The average relative standard deviations of the K+ selective electrode on cigarette paper samples were 0.55% for intra-day test and 2.8% for inter-day test, both less than 5%. The test results of the electrode method were in well agreement with that of ion chromatography, with an average relative deviation of 4.1% （n=10） and recoveries between 95.0% and 101.9%. It was demonstrated effectively through a consecutive test over one week. Conclusion: Among the pretreatment methods for cigarette paper samples, the ultrasonic extraction of potassium ions with 1% diluted acetic acid for 30 min has been found to be fast, simple and environmentally friendly. The ion-selective electrode method is accurate and reliable, which is suitable for the rapid detection of potassium in cigarette paper.

In the era of informatization and digitization, the rapid increase in the number of scientific papers has given rise to various challenges, such as lengthy articles, difficulty in information extraction and high time costs associated with reading. Literature reading challenges for researchers are increasingly tedious and time-consuming. By utilizing the language models, the assited reading system of scientific papers has been designed to address these challenges. By adopting machine reading comprehension technology as the core, the system parses scientific texts and offers some common questions to achieve automated response capabilities. By fully utilizing the pre-trained language model PERT, the system enhances its capabilities in semantic understanding and information extraction, effectively resolving various challenges in reading scientific papers and helping readers improve the efficiency of scientific literature review. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To solve the environmental pollution and harm to human health caused by the use of adhesives in traditional paperboard, the development of environmentally friendly mycelium paperboard has become a hot topic. Due to the high dipole moment and hydrogen bonding between macromolecules, hyphae can form clamp shaped connection structures for nutrient reproduction and transfer, and can grow on natural agricultural waste, forming a natural biocomposite material. This study determined the combination of Ganoderma weberianum/corn straw, and designed single factor cultivation conditions such as cultivation time, straw particle size, and fructose addition to explore the effects on the mechanical properties, waterproof properties, and thermal decomposition performance of the hyphal paperboard formed by hot pressing. The optimal cultivation process was obtained through orthogonal experiments. The experimental results indicate that various factors have varying degrees of influence on the edgewise strength, flexural stiffness, and static bending strength and waterproofness of paperboard. Firstly, when the cultivation time was 30 days, the flexural stiffness reached 16.63 mN/m, which was 21.2% higher than the flexural stiffness of kraft paper (13.10 mN/m). Moreover, with the increase of cultivation time, the water absorption (24 hours) had also decreased from 3.92% to 1.27%. Secondly, previous research results have shown that the addition of fructose, glucose, and sucrose increases the biomass growth rate of strains. In this study, fructose was chosen as an exogenous nutrient, and the results showed that when a mass fraction of 5% fructose was added, the mechanical properties were the best, with a flexural stiffness of 18.87 mN/m, which was 30.5% higher than that of kraft paper (13.10 mN/m). Thirdly, the particle size of the sbstrate has a significant impact on the appearance and properties of the material. The results show that, from the appearance perspective, the mycelium paperboard made of 0.165～0.250 mm particle size has the closest appearance and feel to kraft paper. At the same time, during the testing period, it was found that the mycelium paperboard made of 0.165～0.250 mm straw was the least prone to deformation and loosening, and the molding effect was significantly improved compared to other components. In terms of mechanical properties, the edgewise strength increased by 17.4%, the static bending strength increased by 14.9%, and the flexural stiffness increased by 57.3%. The experimental results show that the degree of influence of various factors on the edgewise strength, flexural stiffness, and static bending strength of paperboard is in the order of particle size, cultivation time,fructose addition amount. When the particle size is 0.165～0.250 mm, the cultivation time is 30 days, and the fructose addition of 5.0%, the edgewise strength of the prepared paperboard is 14.36 N/mm, the static bending strength is 10.89 MPa, and the flexural stiffness is 33.09 mN/m. As the particle size decreases, the water absorption rate and water thickness expansion rate of the paperboard after 24 hours of water absorption decrease to 0.86% and 0.59%. The mycelium paperboard prepared by different single factors has the same thermal decomposition process, starting at around 150 ℃ and reaching its maximum at 350 ℃. This study provides a reference basis for the development and application of mycelium composite materials in the future. [ABSTRACT FROM AUTHOR]

During the forming of aramid paper honeycomb sandwich component of aircraft composites in the autoclave, the structure bears thermo-mechanical coupling case, and it may exist the phenomenon of the honeycomb crack during the forming. The tensile, compressive, shear and thermal properties of aramid paper honeycomb core are obtained by testing. Meanwhile, the numerical simulation of thermo-mechanical sequential coupling of the whole honeycomb sandwich component and the local core area are carried out by combining the finite element analysis method and the inversion method. The results show that the thermal stress during the forming process will not cause the adhesive layer between honeycomb cells to crack, but gas pressure will. The difference value of pressure difference between honeycomb cells required for adhesive layer′s slight destruction and complete destruction is positively related to the initial normal fracture stress of adhesive layer. The pressure difference required for the adhesive layer′s complete destruction is decreased with the increase of the number of loaded cells.

Academic paper recommendation aims to provide users with personalized paper resources.Collaborative filtering methods face the problems of highly sparse data and lack of negative samples.Considering the above challenges, an academic paper recommendation algorithm TAGAN（title and abstract GAN）which incorporated fine-grained semantic features was presented.Firstly, based on titles and abstracts provide abundant semantic features, convolutional neural networks (CNN) was used to extract the global features of the titles, a two-layer long and short-term memory network (LSTM) was built to model abstract words separately.At the same time, the attention mechanism was proposed to associate the title and the abstract semantically.Then, the semantic features of the paper were integrated into the recommendation framework based on generative adversarial network (GAN).The generative model will fit the user’s interest preferences and can effectively replace the negative sampling process.Finally,through the experimental comparison on the public dataset, TAGAN is better than the baseline models in all indicators, which verifies the effectiveness of TAGAN.

Random statistics samples of 605 papers in 50 issues including 18 core journals and 15 provincial journals of atmospheric science show that there are about 38% of the key words or abstract writing is not standardized. In order to improve writing quality of academic papers, the problems and solutions of key words and abstracts in atmospheric science papers were discussed. The main conclusions are as following. The key words mainly have shortcomings in such aspects as selecting common words, omitting subject words, the inappropriate depth of indexing, key word in permutation being in disorder, etc. The abstract has the following shortcomings: the basic elements are incomplete, the improper information is embedded, and the results are general and vague. This study points out that: the selection of key words should be mainly based on the order words in the Chinese Thesaurus, which can be appropriately matched with the scientific and technological terms and proper nouns in the new interdisciplinary, new theory and new technology, and general words should be avoided; The key words should follow the principle of "accurate selection and complete selection". Key words should be extracted from the title, abstract, level title and even the text, which can fully express the theme of the paper and have retrieval value, the number of keywords should be 4-5 and their order should follow certain logical rules. The abstract should contain four elements: purpose, method, result and conclusion; avoid using the first person, embedding background knowledge, self-opinion and subjective evaluation; the result (conclusion) part should be logical, meaningful and quantitative, so that readers can see the core value of the paper through the research results. The article also gives four steps to extract the four elements of the abstract and three common writing formats of atmospheric science academic papers.

[Purpose/Significance] "The Belt and Road" is an initiative proposed by China in recent years to cooperate and develop a community with a shared future for mankind, which has been continuously highly concerned by all circles at home and abroad. From the perspective of the citation of highly cited papers, the academic exchange of countries along the Belt and Road initiative can provide a quantitative reference for future international academic and technological exchanges, collaborative innovation and development. [Method/Process] Based on the highly cited papers among the countries along the “The Belt and Road” in the WoS database from 2013 to 2018, this paper constructed a reference matrix and analyzed the network structure, and drew a national citation network map for cluster division. Furthermore, it explored the current state of academic exchange along the “The Belt and Road” and the direction of Chinese academic output, and further analyzed the correlation between Chinese academic exchanges and trade cooperation with other 64 countries along the route. [Results/Conclusions] The research results show that the countries along "The Belt and Road" have close academic exchange and obvious "small world" characteristics. China is the core of academic exchange and the highly cited papers in many research directions in China are cited by many countries along "The Belt and Road". Besides, academic exchange and trade cooperation between China and countries along “The Belt and Road” are strongly related.

[Purpose/Significance] Science funding provides financial support for academic institutions, researchers and research projects, and at the same time plays a guiding role in the development of scientific innovation. The research of funded papers contributes to the development of the discipline and is of great significance to the encouragement and support of researchers. [Method/Process] Based on the funded papers published in Chinese journals and foreign journals in the field of library and information science (LIS) during the "13th Five-Year Plan" period, this paper analyzes from the perspectives of the time distribution of papers issued, research output of different types foundations and the research topics. [Results/Conclusions] The number of funded papers published in Chinese journals in LIS from 2016 to 2020 has decreased year by year, but the number of funded papers published in foreign journals has slowly increased year by year; for funded papers published in Chinese journal during the "13th Five-Year Plan" period, provincial (municipal) foundations funded papers are more outstanding, and National Natural Science Foundation funded papers are more notable for the number and effects of the funded papers in foreign journals; the funded papers in Chinese journals show a great impact on library services, changes and data, digital resource construction and university libraries; while funded papers in foreign journals pay more attention to social media, theme models, scientometrics and library construction.

This study used bibliometrics to analyze the characteristics of funded papers in the social sciences in Taiwan from 2015 to 2019, including the number of funded papers, funded paper ratio, document types, fields, type of publishing organizations, journal impact, and paper citation impact. The results indicate that the number of funded papers and the funded paper ratio of SSCI papers from Taiwan have both increased. In addition to articles and reviews, conference papers are a major type of funded paper for local SSCI papers. In terms of fields, the nontraditional social sciences, such as environmental sciences, psychiatry, and public/environmental & occupational health, have a particularly high funded paper ratio. However, the number of funded papers and funded paper ratio is the highest in the field of education & educational research. The fields of economics, management, and business have a large number of funded papers but a low funded paper ratio. Universities are the main funded institutions, but hospitals have the highest funded paper ratio. Funded papers tend to have higher paper citation impacts. Therefore, funding positively affects the productivity and impact of SSCI papers from Taiwan. (Article content in Chinese with English extended abstract)

Objective: To analyze the characteristics of highly-cited papers in Chinese Journal of Epidemiology from 2020 to 2023, and provide a basis for subsequent paper solicitation and identify research hotspots. Methods: On December 9, 2023, the citation frequency of each paper in Chinese Journal of Epidemiology from 2020 to 2023 was obtained from China National Knowledge Infrastructure. The total citation frequency of each paper was sorted using Excel 2016 software, and papers with citation frequency ≥30 were extracted for analysis. The keywords of the papers and Contents in Brief were analyzed. Results: A total of 1 317 papers were included in the analysis, of which 389, 342, 308 and 278 papers were included from 2020 to 2023. The total citation frequency was 11 873, and all papers were cited with an average citation frequency of 9. The keywords with high citation frequency in the papers included 2019-nCoV, hypertension, colorectal tumor, hand-foot-mouth disease, hepatitis B. and the average frequency of citation were 162, 77, 62, 51 and 47, respectively. There were 15 highly cited Contents in Brief in total, 11 of which are vital Contents in Brief or unique Contents in Brief, including Response to COVID-19 Epidemic, China Kadoorie Biobank, Epidemiological Research on Infectious Diseases, Healthy Ageing, Colorectal Cancer Prevention and Control, Prevention and Control of Hepatitis B, Quality Assessment of Cancer Screening Guidelines and Consensus, The 40 th Anniversary of Chinese Journal of Epidemiology , Expert Forum, Review, Standard-Protocol-Guide. The total citation frequency was 3 951, accounting for 72.6% (3 951/5 438) of highly cited papers. Conclusions: In the past four years, the highly cited papers of this journal mainly focused on the research field of emerging infectious diseases and chronic diseases. The response to the 2019-nCoV epidemic highlights the academic leading role. The effect of selecting and planning a topic, commissioning authors to write on given topics and making an arrangement in advance with a subject for contribution to vital Contents in Brief or unique Contents in Brief of this journal is pronounced, and the academic influence of the journal continues to improve.

The content of 7 metal elements in 49 kinds of cigarettes composed of 5 kinds of tobacco and 10 kinds of cigarette paper was determined by flame atomic absorption method, the effects of the combination of tobacco and cigarette paper on cigarette tar content were analyzed from four aspects: composition of tobacco, conventional chemical composition, metal element content and parameters of cigarette paper. By constructing a cigarette sample system with co-variation of cigarette tobacco and cigarette paper, the joint effect and relative importance of the two on the tar content were studied. The results show that: The combination of tobacco and cigarette paper was an important factor affecting the tar content, which together explained 81.9% of the variation of tar content, and the effect of tobacco was greater than that of cigarette paper, which explained 48.6% of the variation of tar content. The sodium content in the cut tobacco was positively correlated with the tar content, while the magnesium, manganese and potassium were negatively correlated with the tar content. The influence of cigarette paper parameters on the amount of tar content is interactive, but the trend and degree of its influence are affected by the parameters in the tobacco. In the covariant system of tobacco and cigarette paper, tobacco is the main factor affecting the amount of tar content, and cigarette paper is the secondary factor. [ABSTRACT FROM AUTHOR]

Carbon paper is one of the most commonly used materials for the gas diffusion layer of proton exchange membrane fuel cell, and its performance is the premise to ensure the stable operation of the cell. In order to improve the structure and properties of carbon paper and make it better meet the performance requirements of fuel cell, this study was conducted to press different amounts of graphite plates in the carbonization process to control the applied pressure and analyze the microstructure evolution and mechanism of carbon paper under different pressure. In addition, the effects of applied pressure on the in-plane resistivity, pore size distribution, surface roughness and mechanical properties of carbon paper were also studied. The results show that applying pressure helps to restrain the cracking of resin carbon, reduce the generation of cracks and improve graphitization degree of carbon paper to a certain extent. Furthermore, with the increase of applied pressure, the surface roughness of carbon paper is reduced gradually, while the average and maximum apertures also decrease. When the applied pressure reaches 3600 Pa, compared with the samples without pressure, the in-plane resistivity of carbon paper decreases from 17.15 mΩ·cm to 12.79 mΩ·cm, the tensile strength and flexural strength are improved by 150% and 82.9% respectively.

Writing an analysis paper on the rainstorm event (APRE) is of great significance for the professional and technical personnel engaged in weather forecast research, operations and services to fully understand the multi-scale characteristics and causes of rainstorm events. At present, APRE papers have a large amount of submissions, low writing quality and low acceptance rate, and it is more and more difficult to publish them in the core periodicals of atmospheric science (meteorology). In view of the above situation and based on experiences of the APRE manuscript editing and publishing for Torrential Rain and Disasters in recent years, taking the several typical APREs in the core periodicals in the Chinese mainland as examples, we have conducted an analysis of some problems including the difficulties and key points for title, introduction, main body, and conclusion and discussion in the writing of an APRE article, and discuss the corresponding writing skills. We expect to provide reference for the forecasters in the basic meteorological stations and related researchers to grasp the APRE article writing methods and improve the APRE article writing quality and acceptance rate.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Purpose/Significance] Since the outbreak of COVID-19, there has been a rapid increase in the number of studies related to COVID-19 at home and abroad. Review of relevant literature on COVID-19 provides data resources for related research on the emergence and transmission mechanism of SARS-CoV-2. However, the current COVID-19 related dataset is a collection of the literature, without classifying the data for each subfield, and the coarse-grained information such as the title and author fails to provide an in-depth understanding of the progress of COVID-19 research. Therefore, this paper created a dataset for the COVID-19 sub-domain and a fine-grained entity dataset. [Method/Process] Firstly, this paper proposed a literature screening method based on active learning model, which can obtain more valuable marker samples with less labor cost, so that the classifier has better generalization performance. We considered three base classifiers: Support Vector Machine (SVM), Logistic Regression (LR), and Random Forest (RF), while considering four query strategies: uncertainty sampling, expected error reduction, committee-based query, and random sampling. Taking the origin of SARS-CoV-2, one of the sub-fields related to SARS-CoV-2, as an example, articles related to the origin of SARS-CoV-2 were efficiently and accurately located from the literature. At the same time, this paper designed a labeling scheme covering 18 types of entities, including not only genes, proteins, compounds and other entities that are universal in the biological field, but also corona viruses and wild animals that are unique to the field of SARS-CoV-2. In this paper, visual annotation tool BRAT was used for entity annotation. The tagging team consisted of an administrator and six annotators, and the entity tagging consisted of two rounds. What's more, multi-k consistency index was used to calculate the consistency score of annotation results. [Results/Conclusions] The results of the active learning model show that the uncertain sampling query strategy has the best performance. SVM, LR and RF based on uncertain sampling can correctly screen 425, 465 and 489 articles, respectively. After the removal of overlapping articles, a dataset related to the origin of SARS-CoV-2 was constructed, containing a total of 885 articles. Secondly, based on the proposed entity labeling scheme, 6 annotators completed 99 papers. Based on the results of fine marking, this paper constructed an entity dataset containing 39,118 entities, which is the largest and most comprehensive entity corpus in the field of COVID-19.

Test paper, a type of paper product chemically treated to produce color changes in response to specific substances, serves as a valuable tool for rapid detection and analysis. This experiment, based on the surface modification of glass fiber filter paper, introduces a heavy metal ion detection test paper designed with the fluorescence sensing characteristics of rare earth complexes. The test paper demonstrates its effectiveness and convenience in detecting heavy metal ions in water sources. The innovative test paper proves highly useful in addressing heavy metal ion contamination in water, emphasizing the significant role of chemistry in advancing ecological civilization. The simplified, safe, and environmentally friendly process of creating the test paper yields a practical and user-friendly product. This experiment not only educates on the general production and testing principles of test papers but also sparks students' interest in scientific exploration and application. The experiment, characterized by its simplicity, repeatability, low entry barrier, environmental friendliness, and safety, possesses a unique color aesthetic, leaving a lasting impression. It is suitable for conducting popular science experiments in public places and promoting awareness in experimental teaching across various educational levels. [ABSTRACT FROM AUTHOR]

With the rapid development of flexible electronics industry, the conventional PET, PEN and other plastic substrates are unable to satiate the requirement due to higher cost and low light extraction efficiency. Paper has broad prospects as a flexible substrate due to its wide access, low-cost and thinness. In this paper, we integrated epoxy resin into sulfuric acid paper to fabricate a new type of substrate: plastic-paper. The plastic-paper has excellent optical properties, mechanical properties as well as water and chemical stability, as found through testing. Results show that the surface flatness and wettability of the paper are improved by the application of epoxy resin coating. The plastic-paper has a high optical transmittance up to 88.25%, reaching the same level with PET substrate. And the plastic-paper also has a high transmittance haze of 62.9%, which is far higher than PET substrate. The plastic-paper has a tensile strength up to 108.4 MPa, along with excellent water and chemical stability. Successful fabrication the organic light-emitting device on the plastic-paper surface and emitted uniform light based on the principle of light-emitting electrochemical cell (LEC), under atmospheric condition. The best device performance with a maximum luminance of 396. 2 cd m-2, a maximum current efficiency of 0.64 cd A-1, which is 2.9 times higher than that of PET substrates, providing more excellent optoelectronic properties. The developed plastic-paper with high optical transmittance and high optical haze holds a great potential in flexible optoelectronic devices. [ABSTRACT FROM AUTHOR]

Point-of-care testing (POCT) is a test method performed on the sampling site or patient bedside. Accurate results can be achieved rapidly by the application of portable analytical instruments and compatible reagents. It has been widely used in the field of in vitro diagnosis (IVD). Paper-based microfluidics technology has great potential in developing POCT due to its advantages in low cost, simple operation, rapid detection, portable equipment, and unrestricted application conditions. In recent years, the development of paper-based microfluidic technology and its integration with various new technologies and methods have promoted the substantial development of POCT technology and methods. The classification and characteristic of the paper are summarized in this review. Paper-based microfluidic sample pretreatment methods, the flow control in the process of reaction and the signal detecting and analyzing methods for the testing results are introduced. The research progress of various kinds of microfluidic paper-based analytical devices (μPADs) toward POCT in recent years is reviewed. Finally, remaining problems and the future prospects in POCT application of paper-based microfluidics are discussed.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Collect screen paperboard of mine power transformer and ordinary power transformer in practical lifetime cycle to make insulation test samples, and according to the standard of power, use test means such as viscosity tester, scanning electron microscopy to compare and analyze microstructures of insulation paper such as polymerization degree, surface morphology of mine power transformer and ordinary power transformer, as well as electrical properties such as partial discharge and electrical strength; at the same time, effect of microstructure changes on electrical performances during aging was discussed. The analysis results show that the insulation defects gradually form and expand in the insulation paper during the aging process; compared with the insulation paper of ordinary power transformers, the surface morphology changes of the insulation paper of mine power transformers are more obvious, and the formed defects are more significant.In the aging process, the polymerization degree of insulation paper of ordinary power transformer and mine power transformer presents a gradual decline trend, but the decline speed of polymerization degree of mine power transformer insulation paper is faster.The operating environment of mining area is the main reason that the aging of insulation paper of mine power transformer is more serious than that of ordinary power transformer.In the process of operation, the insulation paper of mine power transformer will produce more discharge quantity, more discharge times and wider discharge phase than ordinary power transformer.In the aging process, the electrical strength of insulation paper of both ordinary power transformer and mine power transformer decreases gradually, but the electrical strength of insulation paper of mine power transformer is lower than that of ordinary power transformer.The microstructural defects of insulation paper of mine power transformers are the direct causes of the more significant changes in their electrical properties.In the process of state monitoring and maintenance of power equipment, it is suggested that the insulation state monitoring of mine power transformers should be carried out strictly according to the power standards,electrical property parameters are more suitable for insulation status monitoring and fault diagnosis of mine power transformer.

[Purpose/Significance] This paper clarifies the concept of novelty, reviews different novelty measurements, and summarizes different types and research progress of novelty detection at home and abroad. It is of great significance to the development of science and scientific technological planning. [Method/Process] By summarizing existing relevant Chinese and English literature, this paper reviews the definitions of novelty, different novelty measurements such as content analysis and citation analysis, as well as their evaluation methods. [Result/Conclusion] Most of the existing methods measure the novelty from a single perspective, and few used combined methods. Therefore, both qualitative and quantitative methods should be taken into consideration to form a comprehensive analysis in the future.

[Purpose / Signficance] The current competition of comprehensive national strength relies more on fundamental research, and highly cited papers have important significance in the evaluation and analysis of fundamental research. Revealing the differences between China and USA in leading basic research from the perspective of highly cited papers, we provide basic data support for national scientific research management decision-making and institution building. [Method / Process] Based on ESI highly cited papers of China and USA, this article uses bibliometric methods and Y index to analyze the specific features and differences of China and USA among three dimensions—trends of publication, country cooperation and institutional output.[Results / Conclusions] The study shows that: (1) Overall, the highly cited papers of China is 2.99 times that of the American highly cited papers, but the gap is narrowing yearly. At the same time, the low citation frequency and the low proportion of highly cited papers are still the shortcomings that limit Chinese international influence. (2) China and USA are closely cooperating with each other. USA dominates scientific research cooperation, as the proportion of first authors and corresponding authors and leading papers is significantly higher than that in China. (3) Chinese high-output institutions have obvious advantages of corresponding authors, but the output gap between institutions is large. And the American high-output institutions are evenly distributed, and they are characterized by deeper and broader international cooperation and inter-agency cooperation.

Different phenolic resins have a direct impact on the properties of aramid paper honeycombs. It is important to study the relationship between phenolic resin and honeycomb properties. Two different phenolic resins are used to prepare aramid paper honeycomb core materials, and the compression properties, shear properties, flame retardancy and dielectric properties of the prepared honeycomb core material are tested. Combining the observation of resin end face resin distribution and contact angle measurement, the reasons for the difference in performance of honeycomb core materials prepared by two kinds of resins are analyzed. The results show that the temperature resistance of the resin itself directly affects the temperature resistance of the honeycomb and the volatilization rate of solvent water in the resin and the surface tension between the resin and the aramid paper affect the resin distribution of the resin on the honeycomb wall. When the content of the honeycomb core resin is the same, the resin rubber column at the end of the joint is beneficial to increase the compressive strength of the honeycomb core material, but the accumulation of the resin at the end of the node reduces the wall thickness of the honeycomb, resulting in a decrease in the shear strength and modulus of the honeycomb.

Taking the ultra-high-speed cigarette making and tipping machine as object， the offset adjustment and rigid-flexible coupling analysis method of the ultra-thin paper tape is studied. By using the spatial flattening projection method， the effects of the spacing of the inclined rollers or the angle of the inclined pads on the paper tape offset is investigated. The kinematics and dynamical models of the ultra-thin paper tape are built， and the elastic modulus of the paper tape is measured. Herein， a rigid-flexible coupling model of offset adjustment mechanism is developed by dispersing the paper tape into flexible body units and the roller into rigid body units. The results show that the numerical and measured lateral offsets at the output tape are consistent. These findings can be available for the offset parameters optimization and smooth conveying of the ultra-thin paper tape.

BackgroundThe COVID-19 pandemic hints at the importance of modernizing disease control system. To understand the scientific research strength of our country's disease control system in recent years is conducive to formulating more targeted policies or measures to promote the modernization of the disease control system.ObjectiveTo understand the scientific research strength and research hotspots of China's provincial-level centers for disease control and prevention (CDCs) from 2011 to 2020, and provide evidence for the development of scientific research work, discipline construction, and talent team construction in CDCs in the future.MethodsThe Science Citation Index Expanded (SCIE) and Social Science Citation Index (SSCI) of the Web of Science Core Collection were used to retrieve SCI-indexed English papers published by 31 provincial CDCs (excluding Taiwan Province, Hong Kong and Macau Special Administrative Regions) in our country from 2011 to 2020, and to screen literature with provincial CDCs as the first affiliation for bibliometric analysis and visual analysis. Bibliometric analysis included the SCI-indexed publications of different provincial CDCs (as co-affiliation and the first affiliation), the number of SCI-indexed papers published by provincial CDCs (as the first affiliation) and funding rates by years, the high-frequency authors of SCI-indexed papers published by provincial CDCs (as the first affiliation) and their distribution, and the characteristics of the journals. Visual analysis software Citespace 5.8.R1 was used to draw keyword co-occurrence maps, cluster information tables, and emergence maps to provide information on research hotspots and their evolution.ResultsFrom 2011 to 2020, the number of SCI-indexed papers from 31 provincial CDCs was 8420 (including co-affiliation), of which 2060 papers listed provincial CDCs as the first affiliation. The provincial CDCs of Zhejiang, Jiangsu, Shanghai, Beijing, Shandong, and Guangdong were the leading six institutes in terms of the total number of SCI-indexed papers contributed as co-affiliation or the first affiliation. There was a large gap in the total number of SCI-indexed papers among the provincial CDCs. The highest total number of SCI-indexed papers contributed by provincial CDCs as the first affiliation was Zhejiang CDC (448 papers), while the lowest number was Xinjiang CDC (only 1 paper). From 2011 to 2020, the total number of SCI-indexed papers contributed by the 31 provincial CDCs as the first affiliation showed an overall increasing trend. Except for 2011, which was 63.1%, the funding rates in other years exceeded 70%. In terms of high-frequency authors, 13 first authors published ≥10 SCI-indexed papers: Zhang Yingxiu from Shandong CDC had the highest number of SCI-indexed papers (47), followed by Hu Yu from Zhejiang CDC. Zhejiang, Jiangsu, Beijing, Guangdong, Shanghai, and Shandong still ranked the top six of ≥4 first authored-SCI papers. In terms of journal characteristics, the top 20 journals with the highest number of SCI papers published a total of 862 papers, accounting for 41.8% (862/2060), and PLOS ONE ranked the first (188 papers). The research hotspots were mainly concentrated in the fields of infection, child health, and epidemiology. The main keywords of the first three cluster categories were related to the research fields of adolescent overweight and obesity, HIV, and vaccine immunity. The results of keyword emergence showed that research hotspots shifted from overweight, obesity, and body mass index to antibodies, vaccines/vaccination, and cohorts.ConclusionThe past ten years have witnessed increasing numbers of SCI-indexed papers published by provincial CDCs in our country and a stubbornly high funding rate. However, the gap among the provincial CDCs is still large seeing that economically developed eastern provincial CDCs published more SCI-indexed papers. Research hotspots have gradually shifted from overweight, obesity, and body mass index to antibodies, vaccines/vaccination, and cohorts.

[Purpose/Significance] This paper investigates the research on author name disambiguation published in recent years, and reviews the development context of relevant research from the perspective of the impact of data on author name disambiguation methods, so as to provide reference for further research. [Method/Process] The papers related to author name disambiguation were collected from English research databases such as Web of Science, Scopus, Google Academic, ACM Digital Library, IEEE Xplore, ScienceDirect, Scopus and Springer Link, and Chinese research databases such as CNKI, CQVIP and WANFANG. The search results cover the relevant papers published from 1998 to 2021. On the premise of giving consideration to authority, influence and novelty, 46 publicationswere selected for review. There are many types and structures of author name disambiguation data. For example, literature feature information is generally presented in unstructured text, and the extracted features can be stored and represented in two-dimensional tables; Citation information and interpersonal relationship are network relational data, which can be stored and represented by graphs, key value pairs or two-dimensional tables. The fundamental reason for different data structures lies in their semantic differences, but the data structure itself determines its applicable algorithm. According to the structure of characteristic data used in the author name disambiguation task and the different corresponding data processing algorithms, the relevant research is divided into three categories: 1) disambiguation method based on literature characteristics, 2) disambiguation method based on social network and 3) disambiguation method by integrating external knowledge. The impact of data on the author name disambiguation method is examined from the data level. [Results/Conclusions] The analysis found that with the progress of technology, deep learning methods have been widely used. Compared with the improvement of the model, the feature learning and representation based on deep learning can significantly improve the effect of the author name disambiguation algorithm. In addition, in order to overcome the problem of insufficient data utilization by a single method and improve the utilization efficiency of data, the three methods show the trend of mutual combination and complementary gain. From the literature research results, there are few related studies on incremental author name disambiguation and multi-language author name disambiguation, which could be one of the directions for further research.

Traditional paper dyes are easy to fade under photothermal conditions, in contrast. waterborne organic pigments have excellent tinctorial strength and high light and weather resistance, which can meet the requirements of highend paper yarn to coloring efficacy and light fastness of the colorants. However, the lack of chemical and hydrogen bonds between organic pigment particles and plant fibers, and the pigments are difficult to fix in the structure of the paper. In this study, cellulose nanofibers (CNF/TOCNF) were used as the primary skeleton network and carboxymethyl cellulose (CMC) macromolecules were used as the secondorder reinforcement network, together construct a multilevel gradient network to enclose and fix organic pigment particles. The dispersion and fixation of the pigment particles are realized by double coating. The results show that the coloring efficacy and colorfastness of the paper yarn base paper can be improved significantly by using the gradient network to fix the pigment particles, and has a positive effect on improving the strength and roughness of the paper. This study has an important role in solving the problem of coloring technology in the production of high-end paper yarn. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to assess chemical risks and realize the large-scale application of colored cigarette paper, a novel cigarette paper with original tobacco color and flavor was prepared by coating the tobacco waste extract obtained from cigarette production. The storage stability, physical and chemical properties of the developed cigarette paper were measured, and its effects on chemical components in cigarette smoke and sensory quality were evaluated. The results showed that: 1) The novel cigarette paper with original tobacco color and flavor showed good uniformity and batch stability, and the main physical indicators remained stable during the storage period for up to 21 months under closed and shaded conditions. 2) The types and mass fractions of chemical components in the developed cigarette paper were significantly lower than those in the tobacco extract, and a lower drying temperature during the coating process was beneficial to improve the retention rate of volatile aromatic substances such as neophytadiene in the cigarette paper. 3) The application of the cigarette paper had no significant effect on the contents of routine chemical components and other chemical components in cigarette smoke. The aroma concentration was increased and the smoke sensory quality was significantly improved under the same cigarette style. [ABSTRACT FROM AUTHOR]

Copyright of China Journal of Oral & Maxillofacial Surgery is the property of Shanghai Jiao Tong University, College of Stomatology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)