Search

Background: Pregnant women are a vulnerable population to COVID-19 given an increased susceptibility to severe SARS-CoV-2 infection and pregnancy complications. However, few SARS-CoV-2 serological surveys have been performed among this population to assess the extent of the infection in sub-Saharan countries. The objectives of this study were to determine SARS-CoV-2 seroprevalence among Beninese pregnant women, to identify spatial seropositivity clusters and to analyse factors associated with the infection. Methods: A cross-sectional study including women in their third trimester of pregnancy attending the antenatal care (ANC) clinics at Allada (south Benin) and Natitingou (north Benin) was conducted. Rapid diagnostic tests (RDT) for detection of IgG/IgM against the SARS-CoV-2 spike protein were performed using capillary blood. Seroprevalence of SARS-CoV-2 antibodies and associations between SARS-CoV-2 serostatus and maternal characteristics were analyzed by multivariate logistic regression. Spatial analyses were performed using the spatial scan statistics to identify spatial clusters of SARS-CoV-2 infection. Results: A total of 861 pregnant women were enrolled between May 4 and June 29, 2022. 58/861 (6.7%) participants reported having received COVID-19 vaccine. None of the participants had been diagnosed with COVID-19 during their pregnancy. SARS-CoV-2 antibodies were detected in 607/802 (75.7%; 95% CI 72.56%–78.62%) of unvaccinated participants. Several urban and rural spatial clusters of SARS-CoV-2 cases were identified in Allada and one urban spatial cluster was identified in Natitingou. Unvaccinated participants from Allada with at least one previous morbidity were at a three-times higher risk of presenting SARS-CoV-2 antibodies (OR = 2.89; 95%CI 1.19%-7.00%). Conclusion: Three out of four pregnant women had SARS-CoV-2 antibodies, suggesting a high virus circulation among pregnant women in Benin, while COVID-19 vaccination coverage was low. Pregnant women with comorbidities may be at increased risk of SARS-CoV-2 infection. This population should be prioritized for COVID-19 diagnosis and vaccination in order to prevent its deleterious effects. Trial registration: NCT06170320 (retrospectively registered on December 21, 2023). [ABSTRACT FROM AUTHOR]

Purpose: Group B Streptococcus (GBS) is the leading cause of invasive infections in newborns. The prevention of GBS neonatal disease relies on the administration of an intrapartum antibiotic prophylaxis to GBS-colonized women. In recent years, rapid intrapartum detection of GBS vaginal colonization using real-time nucleic acid amplification tests (NAATs) emerged as an alternative to antenatal culture screening methods. Methods: We compared the performances of two loop-mediated isothermal amplification (LAMP) tests, the Ampliflash® GBS and the PlusLife® GBS tests, to standard culture for GBS detection in vaginal specimens from pregnant women. The study was conducted from April to July 2023 in a French hospital of the Paris area. Results: A total of 303 samples were analyzed, including 85 culture-positive samples (28.1%). The Ampliflash® GBS test and the PlusLife® GBS tests gave a result for 100% and 96.3% tests, respectively. The performances of the tests were as follows: sensitivity 87.1% (95% confidence interval (CI) 78.3–92.6) and 98.7% (95% CI 93.0-99.8), specificity 99.1% (95% CI 96.7–99.8), and 91.9% (95% CI 87.3–95.0), respectively. False negative results of the Ampliflash® GBS test correlated with low-density GBS cultures. Time-to-results correlated with GBS culture density only for the PlusLife® GBS test (p < 0.001). Conclusion: Both techniques provide excellent analytical performances with high sensitivity and specificity together with a short turnaround time and results available in 10 to 35 min. Their potential to further reduce the burden of GBS neonatal disease compared with antenatal culture screening needs to be assessed in future clinical studies. [ABSTRACT FROM AUTHOR]

Background: Previous studies have suggested that macrophages are present during lens regeneration in newts, but their role in the process is yet to be elucidated., Methods: Here we generated a transgenic reporter line using the newt, Pleurodeles waltl, that traces macrophages during lens regeneration. Furthermore, we assessed early changes in gene expression during lens regeneration using two newt species, Notophthalmus viridescens and Pleurodeles waltl. Finally, we used clodronate liposomes to deplete macrophages during lens regeneration in both species and tested the effect of a subsequent secondary injury after macrophage recovery., Results: Macrophage depletion abrogated lens regeneration, induced the formation of scar-like tissue, led to inflammation, decreased iris pigment epithelial cell (iPEC) proliferation, and increased rates of apoptosis in the eye. Some of these phenotypes persisted throughout the last observation period of 100 days and could be attenuated by exogenous FGF2 administration. A distinct transcript profile encoding acute inflammatory effectors was established for the dorsal iris. Reinjury of the newt eye alleviated the effects of macrophage depletion, including the resolution of scar-like tissue, and re-initiated the regeneration process., Conclusions: Together, our findings highlight the importance of macrophages for facilitating a pro-regenerative environment in the newt eye by regulating fibrotic responses, modulating the overall inflammatory landscape, and maintaining the proper balance of early proliferation and late apoptosis of the iPECs., (© 2024. The Author(s).)

Background: Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents., Results: In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH 4 ) 2 SO 4 , and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R 2 -value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water., Conclusion: The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes., (© 2024. The Author(s).)

Background: The abundance of glucuronoxylan (GX) in agricultural and forestry residual side streams positions it as a promising feedstock for microbial conversion into valuable compounds. By engineering strains of the widely employed cell factory Saccharomyces cerevisiae with the ability to directly hydrolyze and ferment GX polymers, we can avoid the need for harsh chemical pretreatments and costly enzymatic hydrolysis steps prior to fermentation. However, for an economically viable bioproduction process, the engineered strains must efficiently express and secrete enzymes that act in synergy to hydrolyze the targeted polymers., Results: The aim of this study was to equip the xylose-fermenting S. cerevisiae strain CEN.PK XXX with xylanolytic enzymes targeting beechwood GX. Using a targeted enzyme approach, we matched hydrolytic enzyme activities to the chemical features of the GX substrate and determined that besides endo-1,4-β-xylanase and β-xylosidase activities, α-methyl-glucuronidase activity was of great importance for GX hydrolysis and yeast growth. We also created a library of strains expressing different combinations of enzymes, and screened for yeast strains that could express and secrete the enzymes and metabolize the GX hydrolysis products efficiently. While strains engineered with BmXyn11A xylanase and XylA β-xylosidase could grow relatively well in beechwood GX, strains further engineered with Agu115 α-methyl-glucuronidase did not display an additional growth benefit, likely due to inefficient expression and secretion of this enzyme. Co-cultures of strains expressing complementary enzymes as well as external enzyme supplementation boosted yeast growth and ethanol fermentation of GX, and ethanol titers reached a maximum of 1.33 g L - 1 after 48 h under oxygen limited condition in bioreactor fermentations., Conclusion: This work underscored the importance of identifying an optimal enzyme combination for successful engineering of S. cerevisiae strains that can hydrolyze and assimilate GX. The enzymes must exhibit high and balanced activities, be compatible with the yeast's expression and secretion system, and the nature of the hydrolysis products must be such that they can be taken up and metabolized by the yeast. The engineered strains, particularly when co-cultivated, display robust growth and fermentation of GX, and represent a significant step forward towards a sustainable and cost-effective bioprocessing of GX-rich biomass. They also provide valuable insights for future strain and process development targets., (© 2024. The Author(s).)

The current study aimed to evaluate the effects of biogenic silver nanoparticles (AgNPs) on growth behavior and leaf anatomy of in vitro growing shoots of 'Picual' and 'Dolce' olive cultivars. Biosynthesis of AgNPs was carried out using the cell-free filtrate of Fusarium oxysporum. The dimension and shape of the synthesized AgNPs have been analyzed using spectroscopy and topography analysis tools, confirming that the biosynthesis of AgNPs is a crystalline nanostructure with an average particle size of 37 nm. The shoots of the selected olive cultivars were cultured on Rugini olive medium-supplemented AgNPs at 0, 10, 20, and 30mg L - 1 . The effect of genotypes on shoot multiplication was significant, 'Picual' recorded higher values of shoot growth parameters compared with 'Dolce' cultivar. Adding AgNPs to the culture medium significantly affected the growth of in vitro olive shoots. AgNPs at 20 and 30mg L - 1 produced higher values of the number of shoots, shoot length, and leaf number of Picual cv. compared with the control treatments, but the higher AgNPs concentration harmed the growth parameters of Dolce cv. and recorded lower growth values compared with the lower concentration (10mg L - 1 ). AgNPs had a significant effect on leaf morphology and their anatomical structure. The current results showed that the stimulatory effect of AgNPs on shoot growth of in vitro olive shoots is highly dependent on plant genotype and nanoparticle concentration., (© 2024. The Author(s).)

Background: This study aims to investigate the behavioral and neurophysiological changes accompanying the empathy for pain among individuals with insomnia in nonclinical samples, which has been scarcely explored in the existing literature despite the deleterious effects of sleep disturbance on social behavior, and interactions had been well-documented., Methods: Twenty-one individuals with insomnia in nonclinical samples and 20 healthy individuals as normal controls participated in the study. Electroencephalograph (EEG) was continuously recorded, while the participants underwent an empathy for pain task., Results: Subjective ratings of pain for painful and non-painful images revealed no statistically significant differences between the insomnia and control groups. The painful images induced a smaller P2 compared to non-painful images in the insomnia group, whereas no such difference was revealed for the controls. Moreover, a higher power density of the alpha and theta2 bands in the posterior brain regions was found in the insomnia group compared to the control group., Conclusion: These findings suggest that individuals with insomnia exhibit altered neurophysiological responses to pain stimuli and a lower capacity to share empathy for pain. These alterations may be associated with changes in attentional mechanisms., (© 2024. The Author(s).)

Background: Compared to nonsocial information, the human brain is more highly sensitive to social information. As a kind of typical social semantic information, the words describing person traits differ from the nonsocial semantic information describing inanimate objects in many ways. It remains to be seen whether the processing of trait words has a valence asymmetric and whether it differs from the processing of nonsocial semantic information in terms of behavioral responses and neural temporal processes., Method: Taking person and object names as priming stimuli and adjective words only used for describing humans or objects as target stimuli, the present study aimed to investigate the processing characteristics of social and nonsocial semantic information by recording both behavioral and ERP data., Results: Behavioral results showed that the response times for negative words were significantly slower than those for positive words whether for social or nonsocial semantic information. The accuracy rates of negative words were significantly lower than those of positive words when the targets were social words which is contrary to the nonsocial words. The ERP results indicated that there was a negative bias effect on the processing of both types of information during the whole time course of brain neural activity; that is, the P2, N400, and LPP amplitudes elicited by negative words were larger than those elicited by positive words; However, the negative bias effect of social semantic information started at the early perceptual stage which was significantly earlier than the onset of negative bias of nonsocial semantic information, and was significantly affected by the prime type. In addition, there was a significant semantic conflict N400 effect only for nonsocial semantic information., Conclusions: Overall, the present study revealed the existence of an early negative bias of social information and provided evidence for the specificity of social information., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Background: As one of the most abundant bioresource in nature, the value-added utilization of lignocellulosic biomass is limited due to its inherent stubbornness. Pretreatment is a necessary step to break down the recalcitrance of cell walls and achieve an efficient separation of three main components (cellulose, hemicelluloses, and lignin)., Results: In this study, hemicelluloses and lignin in Boehmeria nivea stalks were selectively extracted with a recyclable acid hydrotrope, an aqueous solution of P-toluenesulfonic acid (p-TsOH). 79.86% of hemicelluloses and 90.24% of lignin were removed under a mild pretreatment condition, C80T80t20, (acid concentration of 80 wt%, pretreatment temperature and time of 80 °C and 20 min, respectively). After ultrasonic treatment for 10 s, the residual cellulose-rich solid was directly converted into pulp. Subsequently, the latter was utilized to produce paper via mixing with softwood pulp. The prepared handsheets with a pulp addition of 15 wt% displayed higher tear strength (8.31 mN m 2 /g) and tensile strength (8.03 Nm/g) than that of pure softwood pulp. What's more, the hydrolysates of hemicelluloses and the extracted lignin were transformed to furfural and phenolic monomers with yields of 54.67% and 65.3%, respectively., Conclusions: The lignocellulosic biomass, Boehmeria nivea stalks, were valorized to pulp, furfural, and phenolic monomers, successfully. And a potential solution of comprehensive utilization of Boehmeria nivea stalks was provided in this paper., (© 2023. The Author(s).)

Bacterial Cellulose (BC) is still the most renewable available biopolymer produced in fine nature from alternative microbial sources as bacteria. In the present study, newly BC producing bacteria were successfully isolated from acidic fruits. The most potent producer was isolated from strawberry and identified genetically using 16 s rRNA technique as Achromobacter S3. Different fruit peels were screened to produce BC using the cheapest culture medium. Among them, Mango peel waste (MPW) hydrolysate proved to be the significant inducible alternative medium without any extra nutrients for the maximum productivity. Improvement of the BC yield was successfully achieved via statistical optimization of the MPW culture medium, from 0.52 g/L to 1.22 g/L with 2.5-fold increased about the standard HS culture medium. Additionally, the physicochemical analysis affirmed the cellulose molecular structure as well as observed the crystallinity of nanofiber as 72 and 79% for BC produced by Achromobacter S33 on HS and MPW media, respectively. Moreover, the topographical study illustrated that the BC nanofibers had close characteristics upon fiber dimeter and length as about 10 and 200 nm, respectively., (© 2023. The Author(s).)

Enterococcus faecalis (E. faecalis) biofilm-associated persistent endodontic infections (PEIs) are one of the most common tooth lesions, causing chronic periapical periodontitis, root resorption, and even tooth loss. Clinical root canal disinfectants have the risk of damaging soft tissues (e.g., mucosa and tongue) and teeth in the oral cavity, unsatisfactory to the therapy of PEIs. Nanomaterials with remarkable antibacterial properties and good biocompatibility have been developed as a promising strategy for removing pathogenic bacteria and related biofilm. Herein, carbon dots (CDs) derived from fucoidan (FD) are prepared through a one-pot hydrothermal method for the treatment of PEIs. The prepared FDCDs (7.15 nm) with sulfate groups and fluorescence property are well dispersed and stable in water. Further, it is found that in vitro FDCDs display excellent inhibiting effects on E. faecalis and its biofilm by inducing the formation of intracellular and extracellular reactive oxygen species and altering bacterial permeability. Importantly, the FDCDs penetrated the root canals and dentinal tubules, removing located E. faecalis biofilm. Moreover, the cellular assays show that the developed FDCDs have satisfactory cytocompatibility and promote macrophage recruitment. Thus, the developed FDCDs hold great potential for the management of PEIs., (© 2022. The Author(s).)

Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent past years since they have enormous potential in drug delivery, gene delivery, photodynamic therapy (PDT), photothermal therapy (PTT), bio-imaging, driven motion, etc. To overcome the innate limitations of the conventional INPs, such as fast elimination by the immune system, low accumulation in tumor sites, and severe toxicity to the organism, great efforts have recently been made to modify naked INPs, facilitating their clinical application. Taking inspiration from nature, considerable researchers have exploited cell membrane-camouflaged INPs (CMCINPs) by coating various cell membranes onto INPs. CMCINPs naturally inherit the surface adhesive molecules, receptors, and functional proteins from the original cell membrane, making them versatile as the natural cells. In order to give a timely and representative review on this rapidly developing research subject, we highlighted recent advances in CMCINPs with superior unique merits of various INPs and natural cell membranes for cancer therapy applications. The opportunity and obstacles of CMCINPs for clinical translation were also discussed. The review is expected to assist researchers in better eliciting the effect of CMCINPs for the management of tumors and may catalyze breakthroughs in this area., (© 2022. The Author(s).)

Background: Autohydrolysis is an extensively investigated pretreatment method due to its environmental friendliness. During autohydrolysis, most xylan from hemicellulose can be converted into xylooligosaccharides (XOS), and cellulose in the autohydrolyzed residues can be transformed into glucose after enzymatic hydrolysis. Both of these are value-added biochemicals in the biorefining process. In this work, paper mulberry (PM), which contains abundant protein, was utilized as a raw material to coproduce XOS and single-cell protein (SCP) through autohydrolysis and fermentation technologies., Results: The results showed that 8.3 g of XOS and 1.8 g of amino acids could be recovered in the autohydrolysate (based on 100 g raw material) after autohydrolysis (170 °C, 1 h). Moreover, 5.7 g of low-DP XOS along with 1.8 g of amino acids could be further obtained from the autohydrolysate after hydrolysis with endo-β-1-4-xylanase. In addition, 20.1 g of fermentable monosaccharides was recovered after hydrolyzing the autohydrolyzed PM with cellulase, which can be used to produce 4.8 g of SCP after fermentation with Candida utilis., Conclusion: As a valuable application of PM, a novel process is proposed to coproduce amino acid-rich XOS and SCP through autohydrolysis. The carbohydrate of PM is effectively converted to high value-added products., (© 2022. The Author(s).)