Search

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

Objective: Detection of vascular endothelial growth factor (VEGF) levels in ocular tissue may perhaps provide insight into the role of VEGF in the pathogenesis and progression of diabetic retinopathy (DR). The aim of this study was to evaluate the levels of VEGF in tears and serum amongst type 2 diabetes mellitus (DM) patients. Methods: A comparative cross-sectional study was conducted between August 2016 and May 2018 involving type 2 DM patients with no DR, non-proliferative DR (NPDR), and proliferative DR (PDR). Tear samples were collected using no.41 Whatman filter paper (Schirmer strips) and 5 mL blood samples were drawn by venous puncture. VEGF levels in tears and serum were measured by enzyme-linked immunosorbent assay. Results: A total of 88 type 2 DM patients (no DR: 30 patients, NPDR: 28 patients, PDR: 30 patients) were included in the study. Mean tear VEGF levels were significantly higher in the NPDR and PDR groups (114.4 SD 52.5 pg/mL and 150.8 SD 49.7 pg/mL, respectively) compared to the no DR group (40.4 SD 26.5 pg/mL, p < 0.001). There was no significant difference in the mean serum VEGF levels between the three groups. There was a fair correlation between serum and tear VEGF levels (p = 0.015, r = 0.263). Conclusion: VEGF levels in tears were significantly higher amongst diabetic patients with DR compared to those without DR and were significantly associated with the severity of DR. There was a fair correlation between serum and tear VEGF levels. Detection of VEGF in tears is a good non-invasive predictor test for the severity of DR. A large cohort study is needed for further evaluation. [ABSTRACT FROM AUTHOR]

Background: Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA) which independently analyzes the raw data and reports the results on its website. Objectives: This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis. Methods: Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy) and withdrawal due to adverse events (safety). As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report), followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy. Results: FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34) except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61) pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55) pairwise comparisons and were statistically significant in 5. The “signal” in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical. Conclusion: There was no empirical evidence to suggest biased estimates between the two sources. Increased and detailed transparency in publications would improve the understanding and credibility of published results. Further, the FDA report was found to be a useful source when data are missing in the published report (i.e. reporting bias). [ABSTRACT FROM AUTHOR]

Basic color terms used in Mandarin Chinese have been controversial since first discussed by Berlin and Kay in 1969. Previous studies showed much inconsistency on what should be considered as basic color terms in Mandarin Chinese. In the present study, we investigated categories of color rather than merely the color terms used by Taiwanese native Mandarin speakers. Using samples conforming to the Berlin and Kay survey, various colors were chosen from a collection of Natural Color System (NCS) colored papers and mounted on a piece of neutral gray card. The card was then mounted on a touch-screen, under D65 illumination. Thirty-two single-character color related Mandarin terms were selected from a Chinese character database according to frequency of use. Participants were required to select the color sample that matched the term by pressing a virtual button on the touch screen. The results show that certain terms can be directly correlated to basic color terms in English, comparable with the results of Berlin and Kay’s original study and those that followed. However, some terms, such as Mo (墨 ink), Tie (鐵 iron), and Cai (菜vegetable), show a wide spread of term maps and inconsistent use among subjects. Principle component analysis (PCA) procedures were used to analysis the commodity of data among subjects. The findings suggest that the basic color categories among Mandarin Chinese speakers are similar to those found in the World Color Survey (WCS), but are represented by wide-spread and inconsistent color terms among speakers. [ABSTRACT FROM AUTHOR]

The challenge of detecting research topics in a specific research field has attracted attention from researchers in the bibliometrics community. In this study, to solve two problems of clustering papers, i.e., the influence of different distributions of citation links and involved textual features on similarity computation, the authors propose a hybrid self-optimized clustering model to detect research topics by extending the hybrid clustering model to identify “core documents”. First, the Amsler network, consisting of bibliographic coupling and co-citation links, is created to calculate the citation-based similarity based on the cosine angle of papers. Second, the cosine similarity is also used to compute the text-based similarity, which consists of the textual statistical and topological features. Then, the cosine angle of the linear combination of citation- and text-based similarity is considered as the hybrid similarity. Finally, the Louvain method is applied to cluster papers, and the terms based on term frequency are used to label clusters. To test the performance of the proposed model, a dataset related to the data envelopment analysis field is used for comparison and analysis of clustering results. Based on the benchmark built, different clustering methods with different citation links or textual features are compared according to evaluation measures. The results show that the proposed model can obtain reasonable and effective clustering results, and the research topics of data envelopment analysis field are also analyzed based on the proposed model. As different features are considered in the proposed model compared with previous hybrid clustering models, the proposed clustering model can provide inspiration for further studies on topic identification by other researchers. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Proximal remote sensing is being used across a very wide range of research fields and by scientists, who are often without deep theoretical knowledge optical physics; the author of this article falls squarely in that category! This article highlights two optical phenomena, which may greatly influence the quality and robustness of proximal remote sensing: penetration and scattering. Penetration implies that acquired reflectance signals are associated with both physical and chemical properties of target objects from both the surface and internal tissues/structures. Scattering implies that reflectance signals acquired from one point or object are influenced by scattered radiometric energy from neighboring points or objects. Based on a series of laboratory experiments, penetration and scattering were discussed in the context of “robustness” (repeatability) of hyperspectral reflectance data. High robustness implies that it is possible to control imaging conditions and therefore: 1) obtain very similar radiometric signals from inert objects (objects that do not change) over time, and 2) be able to consistently distinguish objects that are otherwise highly similar in appearance (size, shape, and color) and in terms of biochemical composition. It was demonstrated that robustness of hyperspectral reflectance data (40 spectral bands from 385 to 1024 nm) were significantly influenced by penetration and scattering of radiometric energy. In addition, it was demonstrated that the influence of penetration and scattering varied across the examined spectrum. Characterization of how optical phenomena may affect the robustness of reflectance data is important when using proximal remote sensing technologies as tools used to classify engineering and biological objects. [ABSTRACT FROM AUTHOR]

Aim: To provide a comprehensive overview of cardiovascular disease (CVD) risk prediction models for women and models that include female-specific predictors. Methods: We performed a systematic review of CVD risk prediction models for women in the general population by updating a previous review. We searched Medline and Embase up to July 2017 and included studies in which; (a) a new model was developed, (b) an existing model was validated, or (c) a predictor was added to an existing model. Results: A total of 285 prediction models for women have been developed, of these 160 (56%) were female-specific models, in which a separate model was developed solely in women and 125 (44%) were sex-predictor models. Out of the 160 female-specific models, 2 (1.3%) included one or more female-specific predictors (mostly reproductive risk factors). A total of 591 validations of sex-predictor or female-specific models were identified in 206 papers. Of these, 333 (56%) validations concerned nine models (five versions of Framingham, SCORE, Pooled Cohort Equations and QRISK). The median and pooled C statistics were comparable for sex-predictor and female-specific models. In 260 articles the added value of new predictors to an existing model was described, however in only 3 of these female-specific predictors (reproductive risk factors) were added. Conclusions: There is an abundance of models for women in the general population. Female-specific and sex-predictor models have similar predictors and performance. Female-specific predictors are rarely included. Further research is needed to assess the added value of female-specific predictors to CVD models for women and provide physicians with a well-performing prediction model for women. [ABSTRACT FROM AUTHOR]

Electrical brain stimulation (EBS) is a trendy new technique used to change brain function and treat neurological, psychiatric and psychological disorders. We were curious whether the published literature, which is dominated by positive results, reflects the experience of researchers using EBS. Specifically, we wanted to know whether researchers are able to reproduce published EBS effects and whether they engage in, but fail to report, questionable research practices. We invited 976 researchers to complete an online survey. We also audited 100 randomly-selected published EBS papers. A total of 154 researchers completed the survey. Survey respondents had a median of 3 [1 to 6, IQR] published EBS papers (1180 total) and 2 [1 to 3] unpublished ones (380 total). With anodal and cathodal EBS, the two most widely used techniques, 45–50% of researchers reported being able to routinely reproduce published results. When asked about how study sample size was determined, 69% of respondents reported using the sample size of published studies, while 61% had used power calculations, and 32% had based their decision on pilot data. In contrast, our audit found only 6 papers where power calculations were used and a single paper in which pilot data was used. When asked about questionable research practices, survey respondents were aware of other researchers who selectively reported study outcomes (41%) and experimental conditions (36%), adjusted statistical analysis to optimise results (43%), and engaged in other shady practices (20%). Fewer respondents admitted to engaging in these practices themselves, although 25% admitted to adjusting statistical analysis to optimize results. There was strong agreement that such practices should be reported in research papers; however, our audit found only two such admissions. The present survey confirms that questionable research practices and poor reproducibility are present in EBS studies. The belief that EBS is effective needs to be replaced by a more rigorous approach so that reproducible brain stimulation methods can be devised and applied. [ABSTRACT FROM AUTHOR]

Background: The aim of the present systematic review was to evaluate the hypothesis of an association between periodontitis and the development of cancer. Methods: Two reviewers independently screened electronic and manual sources for pertinent articles. Primary outcome measures were the occurrence of neoplasm diagnosis in exposed and non-exposed groups, reported to evaluate association between cancer and periodontitis. Results: Of the 490 initially retrieved papers 10 were included in the qualitative synthesis and eight in the quantitative synthesis; the eight papers covered six studies. Considering hazard ratios, a statistically significant association was found for all cancers studied (1.14; CI 95%: 1.04, 1.24), digestive tract cancer (1.34; CI 95%: 1.05, 1.72), pancreatic cancer (1.74; CI 95%: 1.21, 2.52), prostate cancer (1.25; CI 95%: 1.04, 1.51), breast cancer (1.11; CI 95%: 1.00, 1.23), corpus uteri cancer (2.20; CI 95%: 1.16, 4.18), lung cancer (1.24; CI 95%: 1.06, 1.45), hematological cancer (1.30; CI 95%: 1.11, 1.53), esophagus / oropharyngeal cancer pooled together (2.25; CI 95%: 1.30, 3.90) and Non-Hodgkin lymphoma (1.30; CI 95%: 1.11, 1.52). Conclusions: Despite the sparse scientific evidence and considering the low statistical power of the results, this systematic review revealed a substantial lack of studies with standardized and comparable methods to speculate about the association between periodontitis and cancer; more studies are need in order to explore further the scientific evidence of such correlation. [ABSTRACT FROM AUTHOR]

Co-diagnosis of HIV and tuberculosis presents a treatment dilemma. Starting both treatments at the same time can cause a flood of immune response called immune reconstitution inflammatory syndrome (IRIS) which can be lethal. But, how long to delay HIV treatment is less understood. In 2011, based on the conclusions of three separate studies, WHO recommended starting HIV treatment earlier for those with later HIV disease progression. This paper conducts a replication study of one of the three studies, by Havlir and colleagues. Using their publicly available data, we were able to replicate most of the results presented in the original paper. In our measurement and estimation analyses we use different estimation techniques to assess the robustness of the results. We find that adjusting for loss to follow-up does not affect the main results of the paper. However, an ANCOVA estimation and an instrumental variable model weaken the main result of the paper of better outcomes with early HIV treatment only for those who are sicker, reducing significance from the 5% to the 10% level. A change-point analysis also detects no changes in effect by timing of HIV treatment initiation or different thresholds of CD4 count for the primary outcome. This result suggests that the choice of start time for HIV treatment initiation should be based on other factors including potential drug interactions, overlapping side effects, a high pill burden and severity of illness rather than CD4 threshold and preset timeframes. While we caution against overgeneralizing, the result of this replication is aligned with more recent studies that show no evidence that early initiation of HIV treatment reduces mortality for any patients. [ABSTRACT FROM AUTHOR]

Traffic congestion in freeway network is a prevalent transportation problem and leads to a strong degradation of freeway network facilities. This paper proposes a new coordinated optimization approach for freeway network, aiming to relieve the traffic congestion in freeway network equipped with the coordinated traffic controllers. The challenge is how to solve the problem between the traffic control goals of each path and those of the network. In this paper, the bi-level programming theory is used to address this problem. More exactly, in the path level, the optimal control model is designed to relieve congestion in each path of the test network. Furthermore, in the network level, the optimal model considers the traffic equilibrium and cost optimization. The efficiency of the proposed approach is tested on a well-known traffic network calibrated by the field test data of freeway network. The results show that the proposed approach has positive effects in balancing traffic load and improving the service level of freeway networks. [ABSTRACT FROM AUTHOR]

This paper introduces a bibliometric, citation network-based method for assessing the social validation of novel research, and applies this method to the development of high-throughput toxicology research at the US Environmental Protection Agency. Social validation refers to the acceptance of novel research methods by a relevant scientific community; it is formally independent of the technical validation of methods, and is frequently studied in history, philosophy, and social studies of science using qualitative methods. The quantitative methods introduced here find that high-throughput toxicology methods are spread throughout a large and well-connected research community, which suggests high social validation. Further assessment of social validation involving mixed qualitative and quantitative methods are discussed in the conclusion. [ABSTRACT FROM AUTHOR]

Increasingly, scholarly articles contain URI references to “web at large” resources including project web sites, scholarly wikis, ontologies, online debates, presentations, blogs, and videos. Authors reference such resources to provide essential context for the research they report on. A reader who visits a web at large resource by following a URI reference in an article, some time after its publication, is led to believe that the resource’s content is representative of what the author originally referenced. However, due to the dynamic nature of the web, that may very well not be the case. We reuse a dataset from a previous study in which several authors of this paper were involved, and investigate to what extent the textual content of web at large resources referenced in a vast collection of Science, Technology, and Medicine (STM) articles published between 1997 and 2012 has remained stable since the publication of the referencing article. We do so in a two-step approach that relies on various well-established similarity measures to compare textual content. In a first step, we use 19 web archives to find snapshots of referenced web at large resources that have textual content that is representative of the state of the resource around the time of publication of the referencing paper. We find that representative snapshots exist for about 30% of all URI references. In a second step, we compare the textual content of representative snapshots with that of their live web counterparts. We find that for over 75% of references the content has drifted away from what it was when referenced. These results raise significant concerns regarding the long term integrity of the web-based scholarly record and call for the deployment of techniques to combat these problems. [ABSTRACT FROM AUTHOR]

Using matching and regression analyses, we measure the difference in citations between articles posted to Academia.edu and other articles from similar journals, controlling for field, impact factor, and other variables. Based on a sample size of 31,216 papers, we find that a paper in a median impact factor journal uploaded to Academia.edu receives 16% more citations after one year than a similar article not available online, 51% more citations after three years, and 69% after five years. We also found that articles also posted to Academia.edu had 58% more citations than articles only posted to other online venues, such as personal and departmental home pages, after five years. [ABSTRACT FROM AUTHOR]

Complex network theory has been successful at unveiling the topology of the brain and showing alterations to the network structure due to brain disease, cognitive function and behavior. Functional connectivity networks (FCNs) represent different brain regions as the nodes and the connectivity between them as the edges of a graph. Graph theoretic measures provide a way to extract features from these networks enabling subsequent characterization and discrimination of networks across conditions. However, these measures are constrained mostly to binary networks and highly dependent on the network size. In this paper, we propose a novel graph-to-signal transform that overcomes these shortcomings to extract features from functional connectivity networks. The proposed transformation is based on classical multidimensional scaling (CMDS) theory and transforms a graph into signals such that the Euclidean distance between the nodes of the network is preserved. In this paper, we propose to use the resistance distance matrix for transforming weighted functional connectivity networks into signals. Our results illustrate how well-known network structures transform into distinct signals using the proposed graph-to-signal transformation. We then compute well-known signal features on the extracted graph signals to discriminate between FCNs constructed across different experimental conditions. Based on our results, the signals obtained from the graph-to-signal transformation allow for the characterization of functional connectivity networks, and the corresponding features are more discriminative compared to graph theoretic measures. [ABSTRACT FROM AUTHOR]

Background: Floating catchment methods have recently been applied to identify priority regions for Automated External Defibrillator (AED) deployment, to aid in improving Out of Hospital Cardiac Arrest (OHCA) survival. This approach models access as a supply-to-demand ratio for each area, targeting areas with high demand and low supply for AED placement. These methods incorporate spatial covariates on OHCA occurrence, but do not provide precise AED locations, which are critical to the initial intent of such location analysis research. Exact AED locations can be determined using optimisation methods, but they do not incorporate known spatial risk factors for OHCA, such as income and demographics. Combining these two approaches would evaluate AED placement impact, describe drivers of OHCA occurrence, and identify areas that may not be appropriately covered by AED placement strategies. There are two aims in this paper. First, to develop geospatial models of OHCA that account for and display uncertainty. Second, to evaluate the AED placement methods using geospatial models of accessibility. We first identify communities with the greatest gap between demand and supply for allocating AEDs. We then use this information to evaluate models for precise AED location deployment. Methods: Case study data set consisted of 2802 OHCA events and 719 AEDs. Spatial OHCA occurrence was described using a geospatial model, with possible spatial correlation accommodated by introducing a conditional autoregressive (CAR) prior on the municipality-level spatial random effect. This model was fit with Integrated Nested Laplacian Approximation (INLA), using covariates for population density, proportion male, proportion over 65 years, financial strength, and the proportion of land used for transport, commercial, buildings, recreation, and urban areas. Optimisation methods for AED locations were applied to find the top 100 AED placement locations. AED access was calculated for current access and 100 AED placements. Priority rankings were then given for each area based on their access score and predicted number of OHCA events. Results: Of the 2802 OHCA events, 64.28% occurred in rural areas, and 35.72% in urban areas. Additionally, over 70% of individuals were aged over 65. Supply of AEDs was less than demand in most areas. Priority regions for AED placement were identified, and access scores were evaluated for AED placement methodology by ranking the access scores and the predicted OHCA count. AED placement methodology placed AEDs in areas with the highest priority, but placed more AEDs in areas with more predicted OHCA events in each grid cell. Conclusion: The methods in this paper incorporate OHCA spatial risk factors and OHCA coverage to identify spatial regions most in need of resources. These methods can be used to help understand how AED allocation methods affect OHCA accessibility, which is of significant practical value for communities when deciding AED placements. [ABSTRACT FROM AUTHOR]

This paper presents a formulation for selecting the stage ratios and number of stages in a multistage transmission with a given desired total transmission ratio in a manner that maximizes efficiency, maximizes acceleration, or minimizes the mass of the transmission. The formulation is used to highlight several implications for gear train design, including the fact that minimizing rotational inertia and mass are competing objectives with respect to optimal selection of stage ratios, and that both rotational inertia and mass can often be minimized by increasing the total number of stages beyond a minimum realizable number. Additionally, a multistage transmission will generally provide maximum acceleration when the stage ratios increase monotonically from the motor to the load. The transmission will have minimum mass when the stage ratios decrease monotonically. The transmission will also provide maximum efficiency when the corresponding stages employ constant stage ratios. This paper aims to use this optimization formulation to elucidate tradeoffs between various common objectives in gear train design (efficiency, acceleration, and mass). [ABSTRACT FROM AUTHOR]

Background: Routine Data Quality Assessments (RDQAs) were developed to measure and improve facility-level electronic medical record (EMR) data quality. We assessed if RDQAs were associated with improvements in data quality in KenyaEMR, an HIV care and treatment EMR used at 341 facilities in Kenya. Methods: RDQAs assess data quality by comparing information recorded in paper records to KenyaEMR. RDQAs are conducted during a one-day site visit, where approximately 100 records are randomly selected and 24 data elements are reviewed to assess data completeness and concordance. Results are immediately provided to facility staff and action plans are developed for data quality improvement. For facilities that had received more than one RDQA (baseline and follow-up), we used generalized estimating equation models to determine if data completeness or concordance improved from the baseline to the follow-up RDQAs. Results: 27 facilities received two RDQAs and were included in the analysis, with 2369 and 2355 records reviewed from baseline and follow-up RDQAs, respectively. The frequency of missing data in KenyaEMR declined from the baseline (31% missing) to the follow-up (13% missing) RDQAs. After adjusting for facility characteristics, records from follow-up RDQAs had 0.43-times the risk (95% CI: 0.32–0.58) of having at least one missing value among nine required data elements compared to records from baseline RDQAs. Using a scale with one point awarded for each of 20 data elements with concordant values in paper records and KenyaEMR, we found that data concordance improved from baseline (11.9/20) to follow-up (13.6/20) RDQAs, with the mean concordance score increasing by 1.79 (95% CI: 0.25–3.33). Conclusions: This manuscript demonstrates that RDQAs can be implemented on a large scale and used to identify EMR data quality problems. RDQAs were associated with meaningful improvements in data quality and could be adapted for implementation in other settings. [ABSTRACT FROM AUTHOR]

Biometric recognition technology based on eye-movement dynamics has been in development for more than ten years. Different visual tasks, feature extraction and feature recognition methods are proposed to improve the performance of eye movement biometric system. However, the correct identification and verification rates, especially in long-term experiments, as well as the effects of visual tasks and eye trackers’ temporal and spatial resolution are still the foremost considerations in eye movement biometrics. With a focus on these issues, we proposed a new visual searching task for eye movement data collection and a new class of eye movement features for biometric recognition. In order to demonstrate the improvement of this visual searching task being used in eye movement biometrics, three other eye movement feature extraction methods were also tested on our eye movement datasets. Compared with the original results, all three methods yielded better results as expected. In addition, the biometric performance of these four feature extraction methods was also compared using the equal error rate (EER) and Rank-1 identification rate (Rank-1 IR), and the texture features introduced in this paper were ultimately shown to offer some advantages with regard to long-term stability and robustness over time and spatial precision. Finally, the results of different combinations of these methods with a score-level fusion method indicated that multi-biometric methods perform better in most cases. [ABSTRACT FROM AUTHOR]

Aims: The aim of this systematic review and meta-analysis is to synthesize the available evidence in scientific papers of smokefree legislation effects on respiratory diseases and sensory and respiratory symptoms (cough, phlegm, red eyes, runny nose) among all populations. Materials and methods: Systematic review and meta-analysis were carried out. A search between January 1995 and February 2015 was performed in PubMed, EMBASE, Cochrane Library, Scopus, Web of Science, and Google Scholar databases. Inclusion criteria were: 1) original scientific studies about smokefree legislation, 2) Data before and after legislation were collected, and 3) Impact on respiratory and sensory outcomes were assessed. Paired reviewers independently carried out the screening of titles and abstracts, data extraction from full-text articles, and methodological quality assessment. Results: A total number of 1606 papers were identified. 50 papers were selected, 26 were related to symptoms (23 concerned workers). Most outcomes presented significant decreases in the percentage of people suffering from them, especially in locations with comprehensive measures and during the immediate post-ban period (within the first six months). Four (50%) of the papers concerning pulmonary function reported some significant improvement in expiratory parameters. Significant decreases were described in 13 of the 17 papers evaluating asthma hospital admissions, and there were fewer significant reductions in chronic obstructive pulmonary disease admissions (range 1–36%) than for asthma (5–31%). Six studies regarding different respiratory diseases showed discrepant results, and four papers about mortality reported significant declines in subgroups. Low bias risk was present in 23 (46%) of the studies. Conclusions: Smokefree legislation appears to improve respiratory and sensory symptoms at short term in workers (the overall effect being greater in comprehensive smokefree legislation in sensory symptoms) and, to a lesser degree, rates of hospitalization for asthma. [ABSTRACT FROM AUTHOR]

Background: Spatial modelling of STH and schistosomiasis epidemiology is now commonplace. Spatial epidemiological studies help inform decisions regarding the number of people at risk as well as the geographic areas that need to be targeted with mass drug administration; however, limited attention has been given to propagated uncertainties, their interpretation, and consequences for the mapped values. Using currently published literature on the spatial epidemiology of helminth infections we identified: (1) the main uncertainty sources, their definition and quantification and (2) how uncertainty is informative for STH programme managers and scientists working in this domain. Methodology/Principal Findings: We performed a systematic literature search using the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA) protocol. We searched Web of Knowledge and PubMed using a combination of uncertainty, geographic and disease terms. A total of 73 papers fulfilled the inclusion criteria for the systematic review. Only 9% of the studies did not address any element of uncertainty, while 91% of studies quantified uncertainty in the predicted morbidity indicators and 23% of studies mapped it. In addition, 57% of the studies quantified uncertainty in the regression coefficients but only 7% incorporated it in the regression response variable (morbidity indicator). Fifty percent of the studies discussed uncertainty in the covariates but did not quantify it. Uncertainty was mostly defined as precision, and quantified using credible intervals by means of Bayesian approaches. Conclusion/Significance: None of the studies considered adequately all sources of uncertainties. We highlighted the need for uncertainty in the morbidity indicator and predictor variable to be incorporated into the modelling framework. Study design and spatial support require further attention and uncertainty associated with Earth observation data should be quantified. Finally, more attention should be given to mapping and interpreting uncertainty, since they are relevant to inform decisions regarding the number of people at risk as well as the geographic areas that need to be targeted with mass drug administration. [ABSTRACT FROM AUTHOR]

Introduction: In this paper we perform a replication analysis of “Effect of a cash transfer programme for schooling on prevalence of HIV and herpes simplex type 2 in Malawi: a cluster randomised trial” by Sarah Baird and others published in “The Lancet” in 2012. The original study was a two-year cluster randomized intervention trial of never married girls aged 13–22 in Malawi. Enumeration areas were randomized to either an intervention involving cash transfer (conditional or unconditional of school enrollment) or control. The study included 1708 Malawian girls, who were enrolled at baseline and had biological testing for HIV and herpes simplex virus type 2 (HSV-2) at 18 months. The original findings showed that in the cohort of girls enrolled in school at baseline, the intervention had an effect on school enrollment, sexual outcomes, and HIV and HSV-2 prevalence. However, in the baseline school dropout cohort, the original study showed no intervention effect on HIV and HSV-2 prevalence. Methods: We performed a replication of the study to investigate the consistency and robustness of key results reported. A pre-specified replication plan was approved and published online. Cleaned data was obtained from the original authors. A pure replication was conducted by reading the methods section and reproducing the results and tables found in the original paper. Robustness of the results were examined with alternative analysis methods in a measurement and estimation analysis (MEA) approach. A theory of change analysis was performed testing a causal pathway, the effect of intervention on HIV awareness, and whether the intervention effect depended on the wealth of the individual. Results: The pure replication found that other than a few minor discrepancies, the original study was well replicated. However, the randomization and sampling weights could not be verified due to the lack of access to raw data and a detailed sample selection plan. Therefore, we are unable to determine how sampling influenced the results, which could be highly dependent on the sample. In MEA it was found that the intervention effect on HIV prevalence in the baseline schoolgirls cohort was somewhat sensitive to model choice, with a non-significant intervention effect for HIV depending on the statistical model used. The intervention effect on HSV-2 prevalence was more robust in terms of statistical significance, however, the odds ratios and confidence intervals differed from the original result by more than 10%. A theory of change analysis showed no effect of intervention on HIV awareness. In a causal pathway analysis, several variables were partial mediators, or potential mediators, indicating that the intervention could be working through its effect on school enrollment or selected sexual behaviors. Conclusions: The effect of intervention on HIV prevalence in the baseline schoolgirls was sensitive to the model choice; however, HSV-2 prevalence results were confirmed. We recommend that the results from the original published analysis indicating the impact of cash transfers on HIV prevalence be treated with caution. [ABSTRACT FROM AUTHOR]

Analysis of functional magnetic resonance imaging (fMRI) data has revealed that brain regions can be grouped into functional brain networks (fBNs) or communities. A community in fMRI analysis signifies a group of brain regions coupled functionally with one another. In neuroimaging, functional connectivity (FC) measure can be utilized to quantify such functionally connected regions for disease diagnosis and hence, signifies the need of devising novel FC estimation methods. In this paper, we propose a novel method of learning FC by constraining its rank and the sum of non-zero coefficients. The underlying idea is that fBNs are sparse and can be embedded in a relatively lower dimension space. In addition, we propose to extract overlapping networks. In many instances, communities are characterized as combinations of disjoint brain regions, although recent studies indicate that brain regions may participate in more than one community. In this paper, large-scale overlapping fBNs are identified on resting state fMRI data by employing non-negative matrix factorization. Our findings support the existence of overlapping brain networks. [ABSTRACT FROM AUTHOR]

This paper describes and presents a stable and reliable set of stereo-photogrammetric normative data for global and spino-pelvic sagittal alignment, as a proven reference system for evaluating/measuring a fully unconstrained natural upright neutral standing attitude in a young healthy adult population. The methodological features described in this article will enable future studies to replicate and/or directly compare a wide range of different postural tests and/or sagittal alignment assessment procedures including the study of sagittal spine shape variations occurring during gait performance. To date, the quantitative evaluation of adult spinal deformity (ASD) has been mainly confined to the X-ray imaging approach and, more recently, to 3D X-ray reconstruction. Within the existing evaluation framework an opportunity exists for an additional approach: a quantitative evaluation procedure which is easy, accurate, relatively speedy and non-ionising, in order to monitor and track the progress of patients in the areas of both surgical and non-surgical treatment. The resources and methodology described in this paper have been proven to meet all these criteria. They have enabled full 3D posture (including 3D spine shape and sagittal alignment of the skeleton) to be consistently and successfully measured in adult volunteers. All the measurement/evaluation procedures and outcomes carried out were based entirely on the new non-ionising 3D opto-electronic stereo-photogrammetric approach described in this article. The protocol for this methodology was based on a standard set of 27 pre-selected anatomical “landmarks” on the human body, providing standard reference points for observation and measurement. A total of 124 healthy subjects were successfully assessed and, for each subject, 27 individual markers were applied to the corresponding locations on his/her body. Statistical tests to investigate gender differences were also carried out. Descriptive statistics are provided for all 15 of the spino-pelvic parameters under consideration. Results indicated significant differences between genders in five sets of parameters: Kyphosis tilt, Head tilt, Pelvic tilt, Spino-pelvic angle and T1-pelvic angle. The data also demonstrate a high degree of congruity with results obtained using the X-ray method, as evidenced by the existing literature in the field. In summary, the current study presents a new stereo-photogrammetric opto-electronic technology which can be used successfully for ASD evaluation and introduces a comprehensive set of normative data analogous to those proposed in X-ray analysis for sagittal spino-pelvic and total body alignment. [ABSTRACT FROM AUTHOR]

The ensemble method random forests has become a popular classification tool in bioinformatics and related fields. The out-of-bag error is an error estimation technique often used to evaluate the accuracy of a random forest and to select appropriate values for tuning parameters, such as the number of candidate predictors that are randomly drawn for a split, referred to as mtry. However, for binary classification problems with metric predictors it has been shown that the out-of-bag error can overestimate the true prediction error depending on the choices of random forests parameters. Based on simulated and real data this paper aims to identify settings for which this overestimation is likely. It is, moreover, questionable whether the out-of-bag error can be used in classification tasks for selecting tuning parameters like mtry, because the overestimation is seen to depend on the parameter mtry. The simulation-based and real-data based studies with metric predictor variables performed in this paper show that the overestimation is largest in balanced settings and in settings with few observations, a large number of predictor variables, small correlations between predictors and weak effects. There was hardly any impact of the overestimation on tuning parameter selection. However, although the prediction performance of random forests was not substantially affected when using the out-of-bag error for tuning parameter selection in the present studies, one cannot be sure that this applies to all future data. For settings with metric predictor variables it is therefore strongly recommended to use stratified subsampling with sampling fractions that are proportional to the class sizes for both tuning parameter selection and error estimation in random forests. This yielded less biased estimates of the true prediction error. In unbalanced settings, in which there is a strong interest in predicting observations from the smaller classes well, sampling the same number of observations from each class is a promising alternative. [ABSTRACT FROM AUTHOR]

Background: Clubfeet are commonly treated using the Ponseti method. This method involves weekly manipulation and casting which gradually corrects the position of the foot. However, the reasons for following a weekly interval are not clear. Question / Purpose: The aim is to investigate the influence of the cast change interval on treatment outcomes in the Ponseti method. Methods: We performed a systematic review of comparative studies in which the cast change interval was varied. Scientific databases were searched for relevant publications, screened for eligibility and assessed for a risk of bias. A 'best evidence' synthesis tool was used to synthesize the results of the included studies and draw conclusions from relevant clinical outcomes. Results: Nine papers matched the inclusion criteria, which provided data of 587 subjects who had a total of 870 clubfeet. There is strong evidence for a positive relation between cast change interval and treatment duration. However, there is no evidence for any relation between the cast change interval and the required number of casts, tenotomy rate, required surgery or failure rate. Conclusions: Accelerated versions are as effective and safe as the traditional Ponseti method. However, more research is needed to assess the long-term results and to identify an optimal cast change interval. [ABSTRACT FROM AUTHOR]

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. [ABSTRACT FROM AUTHOR]

Miniaturization of computer hardware and the demand for network capable devices has resulted in the emergence of a new class of technology called wearable computing. Wearable devices have many purposes like lifestyle support, health monitoring, fitness monitoring, entertainment, industrial uses, and gaming. Wearable devices are hurriedly being marketed in an attempt to capture an emerging market. Owing to this, some devices do not adequately address the need for security. To enable virtualization and connectivity wearable devices sense and transmit data, therefore it is essential that the device, its data and the user are protected. In this paper the use of novel Integrated Circuit Metric (ICMetric) technology for the provision of security in wearable devices has been suggested. ICMetric technology uses the features of a device to generate an identification which is then used for the provision of cryptographic services. This paper explores how a device ICMetric can be generated by using the accelerometer and gyroscope sensor. Since wearable devices often operate in a group setting the work also focuses on generating a group identification which is then used to deliver services like authentication, confidentiality, secure admission and symmetric key generation. Experiment and simulation results prove that the scheme offers high levels of security without compromising on resource demands. [ABSTRACT FROM AUTHOR]

In this paper, we will investigate the effect of diffusion, which is ubiquitous in nature, on the immune system using a reaction-diffusion model in order to understand the dynamical behavior of complex patterns and control the dynamics of different patterns. Through control theory and linear stability analysis of local equilibrium, we obtain the optimal condition under which the system loses stability and a Turing pattern occurs. By combining mathematical analysis and numerical simulation, we show the possible patterns and how these patterns evolve. In addition, we establish a bridge between the complex patterns and the biological mechanism using the results from a previous study in Nature Cell Biology. The results in this paper can help us better understand the biological significance of the immune system. [ABSTRACT FROM AUTHOR]

This paper extends the observations presented in the previously published work on the afterhyperpolarization (AHP) duration changes in motoneurones (MNs) on the paretic (more affected) side of 11 post-stroke patients by the same analysis on the non-paretic (less-affected) side. The estimated AHP duration for patients’ MNs supplying more-affected muscles was significantly longer than control values and the elongation decreased with patient age and disorder duration. For MNs supplying less-affected muscles, dependency of AHP duration on age was closer to the control data, but the scatter was substantially bigger. However, the AHP duration estimate of less-affected MNs tended to be longer than that of controls in the short time elapsed since the stroke, and shorter than controls in the long time. Our results thus suggest that the spinal MNs on both sides respond to the cerebral stroke rapidly with prolongation of AHP duration, which tends to normalize with time, in line with functional recovery. This suggestion is in concert with the published research on post-stroke changes in brain hemispheres. To our knowledge, these dependencies have never been investigated before. Since the number of our data was limited, the observed trends should be verified in a larger sample of patients and such a verification could take into account the suggestions for data analysis that we provide in this paper. Our data are in line with the earlier published research on MN firing characteristics post-stroke and support the conclusion that the MUs of the muscles at the non-paretic side are also affected and cannot be considered a suitable control for the MUs on the paretic side. [ABSTRACT FROM AUTHOR]

A ‘meta-analysis’ was performed to determine effects of post-hatch food and water deprivation (PHFWD) on chicken development, performance and welfare (including health). Two types of meta-analysis were performed on peer-reviewed scientific publications: a quantitative ‘meta-analysis’ (MA) and a qualitative analysis (QA). Previously reported effects of PHFWD were quantified in the MA, for variables related to performance, mortality and relative yolk sac weight. The QA counted the number of studies reporting (non-)significant effects when five or more records were available in the data set (i.e. relative heart, liver and pancreas weight; plasma T3, T4 and glucose concentrations; relative duodenum, jejunum and ileum weight; duodenum, jejunum and ileum length; and villus height and crypt depth in duodenum, jejunum and ileum). MA results indicated that 24 hours of PHFWD (i.e. ≥12–36 hours) or more resulted in significantly lower body weights compared to early-fed chickens up to six weeks of age. Body weights and food intake were more reduced as durations of PHFWD (24, 48, 72, ≥84 hours) increased. Feed conversion rate increased in chickens up to 21 and 42 days of age after ≥84 hours PHFWD in comparison with chickens fed earlier. Total mortality at day 42 was higher in chickens after 48 hours PHFWD compared to early fed chickens or chickens after 24 hours PHFWD. First week mortality was higher in chickens after ≥84 hours PHFWD than in early fed chickens. The MA for relative yolk sac weight was inconclusive for PHFWD. The QA for plasma T3, T4 and glucose concentrations indicated mainly short-term decreases in T3 and glucose in PHFWD chickens compared to early fed chickens, and no effects of PHFWD on T4 concentrations. Relative weights of liver, pancreas and heart were lower after PHFWD, but only in the first week of life. A retarded development of gut segments (duodenum, jejunum and ileum) was found in the first week of life, measured as shorter, lower relative weight, and lower villus height and crypt depth. It is concluded that 48 hours (≥36–60 hours) PHFWD leads to lower body weights and higher total mortality in chickens up to six weeks of age, the latter suggesting compromised chicken welfare, but effects of PHFWD on organ development and physiological status appear to be mainly short-term. [ABSTRACT FROM AUTHOR]

Publication metadata help deliver rich analyses of scholarly communication. However, research concepts and ideas are more effectively expressed through unstructured fields such as full texts. Thus, the goals of this paper are to employ a full-text enabled method to extract terms relevant to disciplinary vocabularies, and through them, to understand the relationships between disciplines. This paper uses an efficient, domain-independent term extraction method to extract disciplinary vocabularies from a large multidisciplinary corpus of PLoS ONE publications. It finds a power-law pattern in the frequency distributions of terms present in each discipline, indicating a semantic richness potentially sufficient for further study and advanced analysis. The salient relationships amongst these vocabularies become apparent in application of a principal component analysis. For example, Mathematics and Computer and Information Sciences were found to have similar vocabulary use patterns along with Engineering and Physics; while Chemistry and the Social Sciences were found to exhibit contrasting vocabulary use patterns along with the Earth Sciences and Chemistry. These results have implications to studies of scholarly communication as scholars attempt to identify the epistemological cultures of disciplines, and as a full text-based methodology could lead to machine learning applications in the automated classification of scholarly work according to disciplinary vocabularies. [ABSTRACT FROM AUTHOR]

Budding yeast, which undergoes polarized growth during budding and mating, has been a useful model system to study cell polarization. Bud sites are selected differently in haploid and diploid yeast cells: haploid cells bud in an axial manner, while diploid cells bud in a bipolar manner. While previous studies have been focused on the molecular details of the bud site selection and polarity establishment, not much is known about how different budding patterns give rise to different functions at the population level. In this paper, we develop a two-dimensional agent-based model to study budding yeast colonies with cell-type specific biological processes, such as budding, mating, mating type switch, consumption of nutrients, and cell death. The model demonstrates that the axial budding pattern enhances mating probability at an early stage and the bipolar budding pattern improves colony development under nutrient limitation. Our results suggest that the frequency of mating type switch might control the trade-off between diploidization and inbreeding. The effect of cellular aging is also studied through our model. Based on the simulations, colonies initiated by an aged haploid cell show declined mating probability at an early stage and recover as the rejuvenated offsprings become the majority. Colonies initiated with aged diploid cells do not show disadvantage in colony expansion possibly due to the fact that young cells contribute the most to colony expansion. [ABSTRACT FROM AUTHOR]

Background: Our systematic review summarizes the evidence concerning the accuracy of serum diagnostic and prognostic tests for colorectal cancer (CRC). Methods: The databases MEDLINE and EMBASE were searched iteratively to identify the relevant literature for serum markers of CRC published from 1950 to August 2012. The articles that provided adequate information to meet the requirements of the meta-analysis of diagnostic and prognostic markers were included. A 2-by-2 table of each diagnostic marker and its hazard ratio (HR) and the confidence interval (CI) of each prognostic marker was directly or indirectly extracted from the included papers, and the pooled sensitivity and specificity of the diagnostic marker and the pooled HR and the CI of the prognostic marker were subsequently calculated using the extracted data. Results: In total, 104 papers related to the diagnostic markers and 49 papers related to the prognostic serum markers of CRC were collected, and only 19 of 92 diagnostic markers were investigated in more than two studies, whereas 21 out of 44 prognostic markers were included in two or more studies. All of the pooled sensitivities of the diagnostic markers with > = 3 repetitions were less than 50%, and the meta-analyses of the prognostic markers with more than 3 studies were performed, VEGF with highest (2.245, CI: 1.347–3.744) and MMP-7 with lowest (1.099, CI: 1.018–1.187)) pooled HRs are presented. Conclusions: The quality of studies addressing the diagnostic and prognostic accuracy of the tests was poor, and the results were highly heterogeneous. The poor characteristics indicate that these tests are of little value for clinical practice. [ABSTRACT FROM AUTHOR]

Methods have been developed for Mendelian randomization that can obtain consistent causal estimates under weaker assumptions than the standard instrumental variable assumptions. The median-based estimator and MR-Egger are examples of such methods. However, these methods can be sensitive to genetic variants with heterogeneous causal estimates. Such heterogeneity may arise from over-dispersion in the causal estimates, or specific variants with outlying causal estimates. In this paper, we develop three extensions to robust methods for Mendelian randomization with summarized data: 1) robust regression (MM-estimation); 2) penalized weights; and 3) Lasso penalization. Methods using these approaches are considered in two applied examples: one where there is evidence of over-dispersion in the causal estimates (the causal effect of body mass index on schizophrenia risk), and the other containing outliers (the causal effect of low-density lipoprotein cholesterol on Alzheimer’s disease risk). Through an extensive simulation study, we demonstrate that robust regression applied to the inverse-variance weighted method with penalized weights is a worthwhile additional sensitivity analysis for Mendelian randomization to provide robustness to variants with outlying causal estimates. The results from the applied examples and simulation study highlight the importance of using methods that make different assumptions to assess the robustness of findings from Mendelian randomization investigations with multiple genetic variants. [ABSTRACT FROM AUTHOR]

Objective: Studies suggest that parenteral MTX may be more efficacious than the oral form at equivalent doses for the treatment of rheumatoid arthritis. We carried out a meta-analysis to compare the efficacy of oral versus parenteral MTX in RA. Methods: PubMed, Web of Science and Embase were systematically searched from inception to June 8th 2017 and reviewed following PRISMA 2009 guidelines, by two independent reviewers. To be included, trials had to study adults with RA randomized to the same dose of either oral or parenteral MTX. The primary endpoint was ACR20 at 6 months. Intention-to-treat analysis results were used when possible. Data from direct comparisons between oral and parenteral methotrexate quantitatively analyzed using maximum likelihood random effects meta-analysis. Relative treatment effects were generated as an odds ratio [OR] (OR>1 indicated a benefit for parenteral therapy). Results: The search yielded 357 papers or abstracts. After review of titles or abstracts and full text papers, we found 4 that met inclusion criteria with 703 patients randomized. Dose of MTX started at 15mg/week and increased up to 25mg/week. The summary OR for achieving ACR20 using parenteral vs. oral MTX was 3.02 (95% CI 1.41, 6.46), with no significant difference in the risk for all adverse events. Conclusion: Parenteral MTX therapy had significantly higher odds than oral MTX of achieving reduction in disease activity. We propose that parenteral MTX is more effective than weekly oral MTX; its widespread use may lead to better control of disease and a decrease in demand for biologic agents. [ABSTRACT FROM AUTHOR]

This paper examines whether tobacco expenditure leads to the crowding out or crowding in of different expenditure items in South Africa. We apply genetic matching to expenditure quartiles of the 2010/2011 South African Income and Expenditure Survey. Genetic matching is a more appealing approach for dealing with the endogeneity of tobacco expenditure that often plagues studies using systems of demand equations. Further, genetic matching provides transparent measures of covariate balance giving the analyst objective means of assessing match success. We find that the poorest tobacco consuming households in South Africa consistently allocate smaller budget shares towards food items than non-smoking households. Specifically, we find that dairy, fruits, nuts and oils are displaced in favour of tobacco expenditure in the two poorest quartiles. Unsurprisingly, food items are never displaced for households in the top two quartiles, given these households’ greater access to resources. Like other studies in the literature, we find that tobacco expenditure consistently crowds-in alcohol across all quartiles confirming the strong complementarities between the two. [ABSTRACT FROM AUTHOR]

Data from clinical trials investigating on-demand medication often consist of an intentionally varying number of measurements per patient. These measurements are often observations of discrete events of when the medication was taken, including for example data on symptom severity. In addition to the varying number of observations between patients, the data have another important feature: they are characterized by a hierarchical structure in which the events are nested within patients. Traditionally, the observed events of patients are aggregated into means and subsequently analyzed using, for example, a repeated measures ANOVA. This procedure has drawbacks. One drawback is that these patient means have different standard errors, first, because the variance of the underlying events differs between patients and second, because the number of events per patient differs. In this paper, we argue that such data should be analyzed by applying a multilevel analysis using the individual observed events as separate nested observations. Such a multilevel approach handles this drawback and it also enables the examination of varying drug effects across patients by estimating random effects. We show how multilevel analyses can be applied to on-demand medication data from a clinical trial investigating the efficacy of a drug for women with low sexual desire. We also explore linear and quadratic time effects that can only be performed when the individual events are considered as separate observations and we discuss several important statistical topics relevant for multilevel modeling. Taken together, the use of a multilevel approach considering events as nested observations in these types of data is advocated as it is more valid and provides more information than other (traditional) methods. [ABSTRACT FROM AUTHOR]

Heart rate variability (HRV) analysis has quantified the functioning of the autonomic regulation of the heart and heart's ability to respond. However, majority of studies on HRV report several differences between patients with congestive heart failure (CHF) and healthy subjects, such as time-domain, frequency domain and nonlinear HRV measures. In the paper, we mainly presented a new approach to detect congestive heart failure (CHF) based on combination support vector machine (SVM) and three nonstandard heart rate variability (HRV) measures (e.g. SUM_TD, SUM_FD and SUM_IE). The CHF classification model was presented by using SVM classifier with the combination SUM_TD and SUM_FD. In the analysis performed, we found that the CHF classification algorithm could obtain the best performance with the CHF classification accuracy, sensitivity and specificity of 100%, 100%, 100%, respectively. [ABSTRACT FROM AUTHOR]

Type 2 diabetes leads to premature death and reduced quality of life for 8% of Americans. Nutrition management is critical to maintaining glycemic control, yet it is difficult to achieve due to the high individual differences in glycemic response to nutrition. Anticipating glycemic impact of different meals can be challenging not only for individuals with diabetes, but also for expert diabetes educators. Personalized computational models that can accurately forecast an impact of a given meal on an individual’s blood glucose levels can serve as the engine for a new generation of decision support tools for individuals with diabetes. However, to be useful in practice, these computational engines need to generate accurate forecasts based on limited datasets consistent with typical self-monitoring practices of individuals with type 2 diabetes. This paper uses three forecasting machines: (i) data assimilation, a technique borrowed from atmospheric physics and engineering that uses Bayesian modeling to infuse data with human knowledge represented in a mechanistic model, to generate real-time, personalized, adaptable glucose forecasts; (ii) model averaging of data assimilation output; and (iii) dynamical Gaussian process model regression. The proposed data assimilation machine, the primary focus of the paper, uses a modified dual unscented Kalman filter to estimate states and parameters, personalizing the mechanistic models. Model selection is used to make a personalized model selection for the individual and their measurement characteristics. The data assimilation forecasts are empirically evaluated against actual postprandial glucose measurements captured by individuals with type 2 diabetes, and against predictions generated by experienced diabetes educators after reviewing a set of historical nutritional records and glucose measurements for the same individual. The evaluation suggests that the data assimilation forecasts compare well with specific glucose measurements and match or exceed in accuracy expert forecasts. We conclude by examining ways to present predictions as forecast-derived range quantities and evaluate the comparative advantages of these ranges. [ABSTRACT FROM AUTHOR]

B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications. [ABSTRACT FROM AUTHOR]