Search

The third generation of the BeiDou navigation satellite system (BDS-3) can transmit five-frequency signals. The real-time satellite clock offset of BDS-3 is typically generated utilizing the B1I/B3I combination with the ambiguity-float solutions. By conducting the ambiguity resolution (AR), the reliability of the satellite clock offset can be improved. However, the performance of BDS-3 ambiguity-fixed real-time satellite clock offset with B1C/B2a signals remains unknown and unrevealed. In this contribution, the performance of the BDS-3 ambiguity-fixed satellite clock offset with the new B1C/B2a signals is investigated. One week of observation data from 85 stations was used to perform ambiguity-fixed satellite clock offset estimation. For B1I/B3I and B1C/B2a signals, the wide-lane (WL) uncalibrated phase delay (UPD) on the satellite end is fairly stable for one day, while the narrow-lane (NL) UPD standard deviation (STD) amounts to 0.122 and 0.081 cycles, respectively. The mean ambiguity fixing rate is 80.7% and 78.0% for these two signal combinations, and the time to first fix (TTFF) for the B1C/B2a signals is remarkably shorter than that of the B1I/B3I signals. The STDs of the ambiguity-float and -fixed satellite clock offsets are 0.033 and 0.026 ns, respectively, for the B1I/B3I combination, and it is reduced to 0.024 and 0.023 ns for B1C/B2a signals, respectively. Using the estimated UPD and clock offset products, the positioning performance of the kinematic Precise Point Positioning (PPP)-AR results amounts to 1.56, 1.23, and 4.46 cm in the east, north, and up directions for B1I/B3I signals, respectively. It is improved to 1.36, 1.16, and 4.25 cm using the products estimated with the B1C/B2a signals, with improvements of 12.8%, 5.7%, and 4.7% in three directions, respectively. The experiments showed that the performances of the ambiguity-fixed satellite clock offsets and the PPP-AR results using B1C/B2a signals are better than those of B1I/B3I. [ABSTRACT FROM AUTHOR]

The most commonly used real-time augmentation services in China are the International GNSS Service's (IGS) real-time service (RTS), PPP-B2b service, and Double-Frequency Multi-Constellation (DFMC) service of the BeiDou Satellite-Based Augmentation System (BDSBAS) service. However, research on the performance evaluation, comparison, and application scope of these three products is still incomplete. This article introduces methods for obtaining real-time augmentation information and real-time orbit and clock offset recovery. Based on real-time orbit and clock offset accuracy, positioning accuracy, and positioning availability, this article systematically evaluates the performance and analyzes the application fields of Centre National d'Études Spatiales (CNES), PPP-B2b, and BDSBAS augmentation information. The results of the evaluation revealed that the radial accuracy of the CNES and PPP-B2b real-time orbit product is consistent, and the Root Mean Square (RMS) is better than 5 cm. The CNES real-time orbit product can achieve centimeter-level accuracy in both along-track and cross-track components, surpassing PPP-B2b's decimeter-level accuracy. Both services demonstrate consistent accuracy in the real-time clock offset, with PPP-B2b showing similar standard deviations (STDs) of 0.16 ns for different satellites. However, for CNES, the STD of the real-time clock offset varies, with values of 0.10 ns, 0.19 ns, and 0.60 ns, respectively, for GPS, BDS-3 Medium Earth Orbit (MEO), and BDS-3 Inclined Geosynchronous Satellite Orbit (IGSO) satellites. Centimeter-level accuracy is achieved after convergence and positioning availability exceeds 99% for CNES and PPP-B2b services. Therefore, the difference between the two services in application areas depends on the acquisition of augmentation information. However, BDSBAS, which concentrates on code observations, demonstrates inferior performance in real-time orbit, clock offset, positioning accuracy, and positioning availability when compared to the other two services. Its primary application is in the aviation and maritime domains, where there is a greater need for service integrity, continuity, and reliability. [ABSTRACT FROM AUTHOR]

Introducing precise atmosphere information into precise point positioning enables rapid ambiguity resolution and introduces a significant accuracy improvement. However, it can only be implemented in regions with dense networks and stable communication links. For larger areas, e.g., an intercontinental level, there is a conflict between the accuracy of corrections and the amount of atmosphere information to be disseminated. We develop a hierarchical augmentation mode to combine the advantages of the fitting model and region interpolation model to relieve the communication burden. Relying on the fitting model with fewer coefficients applied over large areas as the essential information, the unmodeled errors are calculated at each reference station, and further correction information is optional compensation depending on the magnitude of the unmodeled residuals. We perform the proposed models on 103 EUREF Permanent Network stations with 200-km station spacing and 84 stations as the external validation. The ionosphere and troposphere fitting models have an average accuracy of about 4.2 and 1.3 cm, respectively, under meteorologically calm conditions. The unmodeled error transmission determined by the magnitude of residuals can be reduced by 61% and 96% for the ionospheric and tropospheric delays, respectively, with respect to the legacy interpolation mode. Further compensation implemented, i.e., unmodeled residuals, can achieve instantaneous convergence for 83.6% of all solutions, and the overall initialization time is within 1.0 min. Thus, the proposed hierarchical positioning mode satisfies real-time positioning convergence requirements and significantly reduces massive corrections in communication. [ABSTRACT FROM AUTHOR]

Real-time satellite clock offset is a crucial element for real-time precise point positioning (RT-PPP). However, the elapsed time for undifferenced (UD) multi-global navigation satellite system (GNSS) real-time satellite clock offset estimation at each epoch is increased with the growth of stations, which may fall short of real-time application requirements. Therefore, a rapid estimation method for UD multi-GNSS real-time satellite clock offset is proposed to improve the computation efficiency, in which both the dimension of the normal equation (NEQ) and the number of redundant observations are calculated before adjustment; if these two values are larger than the predefined thresholds, the elevation mask is gradually increased until they are less than the predefined thresholds. Then, the clock offset estimation is conducted; this method is called clock offset estimation using partial observations. Totals of 50, 60, 70 and 80 stations are applied to perform experiments. Compared to clock offset estimation using all observations, the elapsed times of clock offset estimation using partial observations can be reduced from 6.80 to 3.10 s, 7.93 to 2.97 s, 12.04 to 3.14 s for 60, 70 and 80 stations, respectively. By using the proposed method, the elapsed time of the clock offset estimation at each epoch is less than 5 s. The estimated clock offset accuracy for GPS, BDS-3, Galileo and GLONASS satellites are better than 0.04, 0.05, 0.03 and 0.16 ns when using the partial observations to estimate clock offset with 50, 60, 70 and 80 stations, respectively. For the multi-GNSS kinematic PPP using the estimated clock offset from 50, 60, 70 and 80 stations with partial observations, the positioning accuracy at 95% confidence level in the east, north and up direction are better than 2.70, 2.20 and 5.60 cm, respectively. [ABSTRACT FROM AUTHOR]

The satellite clocks used in the BeiDou-2 satellite navigation System (BDS) are Chinese self-developed Rb atomic clocks, and their performances and stabilities are worse than GPS and Galileo satellite clocks. Due to special periodic noises and nonlinear system errors existing in the BDS clock offset series, the GPS ultra-rapid clock model, which uses a simple quadratic polynomial plus one periodic is not suitable for BDS. Therefore, an improved prediction model for BDS satellite clocks is proposed in order to enhance the precision of ultra-rapid predicted clock offsets. First, a basic quadratic polynomial model which is fit for the rubidium (Rb) clock is constructed for BDS. Second, the main cyclic terms are detected and identified by the Fast Fourier Transform (FFT) method according to every satellite clock offset series. The detected results show that most BDS clocks have special cyclic terms which are different from the orbit periods. Therefore, two main cyclic terms are added to absorb the periodic effects. Third, after the quadratic polynomial plus two periodic fitting, some evident nonlinear system errors also exist in the model residual, and the Back Propagation (BP) neural network model is chosen to compensate for these nonlinear system errors. The simulation results show that the performance and precision using the improved model are better than that of China iGMAS ultra-rapid prediction (ISU-P) products and the Deutsches GeoForschungsZentrum GFZ BDS ultra-rapid prediction (GBU-P) products. Comparing to ISU-P products, the average improvements using the proposed model in 3 h, 6 h, 12 h and 24 h are 23.1%, 21.3%, 20.2%, and 19.8%, respectively. Meanwhile the accuracy improvements of the proposed model are 9.9%, 13.9%, 17.3%, and 21.2% compared to GBU-P products. In addition, the kinematic Precise Point Positioning (PPP) example using 8 Multi-GNSS Experiment MGEX stations shows that the precision based on the proposed clock model has improved about 16%, 14%, and 38% in the North (N), East (E) and Height (H) components. [ABSTRACT FROM AUTHOR]

In the Global Navigation Satellite System (GNSS) community, the Quasi-Zenith Satellite System (QZSS) is an augmentation system for users in the Asia-Pacific region. However, the characteristics and performance of four QZSS satellite clocks in a long-term scale are unknown at present. However, it is crucial to the positioning, navigation and timing (PNT) services of users, especially in Asia-Pacific region. In this study, the characteristics and performance variation of four QZSS satellite clocks, which including the phase, frequency, frequency drift, fitting residuals, frequency accuracy, periodic terms, frequency stability and short-term clock prediction, are revealed in detail for the first time based on the precise satellite clock offset products of nearly 1000 days. The important contributions are as follows: (1) It is detected that the times of phase and frequency jump are 2.25 and 1.5 for every QZSS satellite clock in one year. The magnitude of the frequency drift is about 10−18. The periodic oscillation of frequency drift of J01 and J02 satellite clocks is found. The clock offset model precision of QZSS is 0.33 ns. (2) The two main periods of QZSS satellite clock are 24 and 12 hours, which is the influence of the satellite orbit; (3) The frequency stability of 100, 1000 and 10,000 s are 1.98 × 10−13, 6.59 × 10−14 and 5.39 × 10−14 for QZSS satellite clock, respectively. The visible "bump" is found at about 400 s for J02 and J03 satellite clocks. The short-term clock prediction accuracy of is 0.12 ns. This study provides a reference for the state monitoring and performance variation of the QZSS satellite clock. [ABSTRACT FROM AUTHOR]

The emergence of multiple global navigation satellite systems (multi-GNSS), including global positioning system (GPS), global navigation satellite system (GLONASS), Beidou navigation satellite system (BDS), and Galileo, brings not only great opportunities for real-time precise point positioning (PPP), but also challenges in quality control because of inevitable data anomalies. This research aims at achieving the real-time quality control of the multi-GNSS combined PPP using additional observations with opposite weight. A robust multiple-system combined PPP estimation is developed to simultaneously process observations from all the four GNSS systems as well as single, dual, or triple systems. The experiment indicates that the proposed quality control can effectively eliminate the influence of outliers on the single GPS and the multiple-system combined PPP. The analysis on the positioning accuracy and the convergence time of the proposed robust PPP is conducted based on one week's data from 32 globally distributed stations. The positioning root mean square (RMS) error of the quad-system combined PPP is 1.2 cm, 1.0 cm, and 3.0 cm in the east, north, and upward components, respectively, with the improvements of 62.5%, 63.0%, and 55.2% compared to those of single GPS. The average convergence time of the quad-system combined PPP in the horizontal and vertical components is 12.8 min and 12.2 min, respectively, while it is 26.5 min and 23.7 min when only using single-GPS PPP. The positioning performance of the GPS, GLONASS, and BDS (GRC) combination and the GPS, GLONASS, and Galileo (GRE) combination is comparable to the GPS, GLONASS, BDS and Galileo (GRCE) combination and it is better than that of the GPS, BDS, and Galileo (GCE) combination. Compared to GPS, the improvements of the positioning accuracy of the GPS and GLONASS (GR) combination, the GPS and Galileo (GE) combination, the GPS and BDS (GC) combination in the east component are 53.1%, 43.8%, and 40.6%, respectively, while they are 55.6%, 48.1%, and 40.7% in the north component, and 47.8%, 40.3%, and 34.3% in the upward component. [ABSTRACT FROM AUTHOR]