Search

This document discusses the societal impact of applying artificial intelligence (AI) to traffic and transportation. Sustainable transport is considered crucial for sustainable cities and communities, and AI has the potential to significantly influence daily life in urban areas. The document highlights the interdisciplinary challenges of understanding and coordinating transportation systems, which involve various players with conflicting goals and constraints. It also presents a selection of innovative solutions related to traffic management, including machine learning, reinforcement learning, and optimization approaches. The document concludes by expressing gratitude to the authors, reviewers, and committee members involved in the creation of the special issue. [Extracted from the article]

With the rapid development of new-generation cyber–physical system (CPS) technologies, the smart operation and management of the broad bean harvesting system are enabled. This paper proposed a smart broad bean harvesting system (SBHS) and a self-adaptive control method based on CPS technologies. Firstly, the overall architecture of the SBHS is designed, which consists of four main components, namely optimal intelligent perception environment configuration, digital twin model construction, virtual simulation and real-time optimization, self-adaptive adjustment and control. Then, three key enabling technologies are discussed in detail, namely, intelligent perception environment configuration for the SBHS, digital twin model construction for the SBHS, colored Petri net (CPN)-based self-adaptive analysis and control of the harvesting system. Lastly, a proof-of-concept experiment based on a cooperative company is presented to illustrate the main work logic and advantage of the proposed SBHS. After the edge–cloud cooperative intelligent harvesting environment is configured, the CPN model for the workflow of the SBHS is created to analyze and optimize the harvesting processes. In addition, a management and control platform are developed to further illustrate the implementation of the proposed SBHS and the self-adaptive control method. [ABSTRACT FROM AUTHOR]

Nanoscale integration is difficult on rough surfaces despite their ubiquity and usefulness. Paper is an emerging material system because it is renewable, flexible, and lightweight. However, owing to the rough surface of paper, it is difficult to use conventional nanoscale integration methods. Herein, nanoscale printing of CdSe/ZnS quantum dots on paper using a 3D printing method with surface adaptive control of the femtoliter meniscus is demonstrated. The approach allows the direct integration of light‐emitting materials on the intact surface of paper with nanoscale lateral confinement. The 3D‐printed nanostructures can be treated as a planar pattern of the nanoscale dots when viewed from the top. The individually addressable nature of the 3D printing method enables the equalization of the printed heights, which is essential for practical use in general planar systems. This method can be used in many areas that require paper such as paper electronics, security printing, biomedical engineering, and possibly other material systems with rough surfaces. [ABSTRACT FROM AUTHOR]

Abstract: Advanced neuro-fuzzy modeling, namely an adaptive network-based fuzzy inference system (ANFIS), was employed to develop models for the prediction of suspended solids (SS) and chemical oxygen demand (COD) removal of a full-scale wastewater treatment plant treating process wastewaters from a paper mill. In order to improve the network performance, fuzzy subtractive clustering was used to identify model''s architecture and optimize fuzzy rule, meanwhile principal component analysis (PCA) was applied to reduce the input variable dimensionality. Input variables were reduced from six to four for COD and SS models, by considering PCA results and linear correlation matrices among input and output variables. The results indicate that reasonable forecasting and control performances have been achieved through the developed system. The minimum mean absolute percentage errors of 1.003% and 0.5161% for CODeff and SSeff could be achieved using ANFIS. The maximum correlation coefficient values for CODeff and SSeff were 0.9912 and 0.9882, respectively. The minimum mean square errors of 1.2883 and 0.0342, and the minimum RMSEs of 1.135 and 0.1849 for CODeff and SSeff could also be achieved. [Copyright &y& Elsevier]

Due to the complex internal working process of circulating cooling water systems, most traditional control methods struggle to achieve stable and precise control. Therefore, this paper presents a novel adaptive control structure for the Twin Delayed Deep Deterministic Policy Gradient algorithm, which is based on a reference trajectory model (TD3-RTM). The structure is based on the Markov decision process of the recirculating cooling water system. Initially, the TD3 algorithm is employed to construct a deep reinforcement learning agent. Subsequently, a state space is selected, and a dense reward function is designed, considering the multivariable characteristics of the recirculating cooling water system. The agent updates its network based on different reward values obtained through interactions with the system, thereby gradually aligning the action values with the optimal policy. The TD3-RTM method introduces a reference trajectory model to accelerate the convergence speed of the agent and reduce oscillations and instability in the control system. Subsequently, simulation experiments were conducted in MATLAB/Simulink. The results show that compared to PID, fuzzy PID, DDPG and TD3, the TD3-RTM method improved the transient time in the flow loop by 6.09s, 5.29s, 0.57s, and 0.77s, respectively, and the Integral of Absolute Error(IAE) indexes decreased by 710.54, 335.1, 135.97, and 89.96, respectively, and the transient time in the temperature loop improved by 25.84s, 13.65s, 15.05s, and 0.81s, and the IAE metrics were reduced by 143.9, 59.13, 31.79, and 1.77, respectively. In addition, the overshooting of the TD3-RTM method in the flow loop was reduced by 17.64, 7.79, and 1.29 per cent, respectively, in comparison with the PID, the fuzzy PID, and the TD3. [ABSTRACT FROM AUTHOR]

In this paper, we present several remarks on the paper by Yao et al. (citeyearcite.nine). The results presented in the present paper are interesting improvements on the main results of Yao et al. [ABSTRACT FROM AUTHOR]

Abstract: Using advanced machine learning techniques as an alternative to conventional double-entry volume equations known as classical allometric models, regression models of the inside-bark volume (dependent variable) for standing Eucalyptus globulus trunks (or main stems) have been built as a function of the following three independent variables: age, height and outside-bark diameter at breast height (D). The allometric models of volume, biomass or carbon support the estimation of carbon storage in forests and agroforestry systems. On one hand, this paper presents the construction of allometric models of the inside-bark volume for E. globulus trees. On the other hand, the experimental observed data (age, height, D and inside-bark volume) for 142 trees (E. globulus) were measured and a nonlinear model was built using a data-mining methodology based on multivariate adaptive regression splines (MARS) technique and multilayer perceptron networks (MLP) for regression problems. Coefficients of determination and Furnival’s indices indicate the superiority of the MARS technique over the allometric regression models and the MLP network. The agreement of the MARS model with observed data confirmed the good performance of the same one. Finally, conclusions of this innovative research are exposed. [Copyright &y& Elsevier]

A reliable human-robot workcell relies on accurate and nearly real-time updated models, especially in a constrained yet dynamic environment. This paper investigates digital twin-driven human-robot collaborative assembly enabled by function blocks. Leveraging sensor data, digital models are developed to precisely mimic physical human-robot collaborative settings supported by a digital-twin architecture. An advance-execution twin system based on the current status through real-time condition monitoring performs assembly planning and adaptive robot control using a network of function blocks. An augmented reality-based interaction method using HoloLens further facilitates human-centric assembly. An engine-assembly case study is performed to validate the effectiveness of the system. [ABSTRACT FROM AUTHOR]

To achieve frequency stability and economic efficiency in isolated microgrids, grid operators face a trade-off between multiple performance indicators. This paper introduces a data-driven adaptive load frequency control (DD-ALFC) approach, where the load frequency controller is modeled as an agent that can balance different objectives autonomously. The paper also proposes a priority replay soft actor critic (PR-SAC) algorithm to implement the DD-ALFC method. The PR-SAC algorithm enhances the policy randomness by using entropy regularization and maximization, and improves the learning adaptability and generalization by using priority experience replay. The proposed DD-ALFC method based on the PR-SAC algorithm can achieve higher adaptability and robustness in complex microgrid environments with multiple performance indicators, and improve both the frequency control and the economic efficiency. The paper validates the effectiveness of the proposed method in the Zhuzhou Island microgrid. [ABSTRACT FROM AUTHOR]

In modern engineering, the dynamics of many practical problems can be described by hyperbolic distributed parameter systems. This paper is devoted to the adaptive prescribed performance control for a class of typical uncertain hyperbolic distributed parameter systems, since uncertainties are inevitable in practice. The systems in question simultaneously have unknown in-domain spatially varying damping coefficient and unknown boundary constant damping coefficient. Moreover, dynamic boundary condition is considered in the present paper. These characteristics make the control problem in the paper essentially different from those in the related works. To solve the problem, using adaptive technique based projection operator, backstepping method developed for ODEs and Lyapunov stability theories, a powerful adaptive prescribed performance control scheme is proposed to successfully guarantee that all states of the resulting closed-loop system are bounded, furthermore, the original system state converges to an arbitrary prescribed small neighborhood of the origin. Compared with the existing results, the developed control schemes can not only effectively handle the serious uncertainties, but also overcome the technical difficulties in the infinite-dimensional backstepping control design method caused by the dynamic boundary condition and guarantee prescribed performance. [ABSTRACT FROM AUTHOR]

The low carbon park islanded microgrid faces operational challenges due to the high variability and uncertainty of distributed renewable energy sources. These sources cause severe random disturbances that impair the frequency control performance and increase the regulation cost of the islanded microgrid, jeopardizing its safety and stability. This paper presents a data-driven intelligent load frequency control (DDI-LFC) method to address this problem. The method replaces the conventional LFC controller with an intelligent agent based on a deep reinforcement learning algorithm. To adapt to the complex islanded microgrid environment and achieve adaptive multi-objective optimal frequency control, this paper proposes the quantum-inspired maximum entropy actor-critic (QIS-MEAC) algorithm, which incorporates the quantum-inspired principle and the maximum entropy exploration strategy into the actor-critic algorithm. The algorithm transforms the experience into a quantum state and leverages the quantum features to improve the deep reinforcement learning's experience replay mechanism, enhancing the data efficiency and robustness of the algorithm and thus the quality of DDI-LFC. The validation on the Yongxing Island isolated microgrid model of China Southern Grid (CSG) demonstrates that the proposed method utilizes the frequency regulation potential of distributed generation, and reduces the frequency deviation and generation cost. [ABSTRACT FROM AUTHOR]

In this paper, we dealt with the tracking control problem of a class of fractional-order uncertain systems with time delays. In order to handle the effects brought by the uncertainties, external disturbances, time-delay terms, and to overcome the obstacles caused by inputs saturation, the tracking controller, which consisted of linear control law, nonlinear law, and robust control law proposed in this paper, was designed by combining the composite nonlinear feedback control method and the properties of fractional order operators. Furthermore, the validation of this tracking controller was proved. [ABSTRACT FROM AUTHOR]

This paper discusses the congestion control challenges in a network employing multi-bottleneck Transmission Control Protocol/Active Queue Management (TCP/AQM). The study specifically focuses on networks characterized by input nonlinearity and unknown disturbances. We regard the network as a whole, and consider the influence between multiple nodes and unknown disturbance, a dynamic model of multi-bottleneck network is established. And the impact of dead zone and saturation on the system is taken into account for the first time in the model, the builded TCP/AQM model is more practicable. Based on the characteristics of fuzzy logic systems (FLS), combined with backstepping technology and Lyapunov function, an adaptive congestion control algorithm is designed to make full use of the link resources of each node and improve the network utilization. Ultimately, the proposed algorithm's efficacy and superiority are substantiated through simulation. [ABSTRACT FROM AUTHOR]

A complex dynamical network (CDN) can be considered as the composition system with the nodes subsystem (NS) and the links subsystem (LS), and both subsystems are coupled with each other. In this paper, two vector differential equations (VDE) are used to describe the dynamical behaviours of NS and LS, respectively, in which the dynamical behaviour of NS is considered as the VDE with the second derivative term (SDT). This paper mainly focuses on the dynamics of LS, which is represented as VDE with the intuitive topologic feature of outgoing links, and investigates the design of the tracking controller for NS and the auxiliary tracking objectives (ATO) for LS. Firstly, the dynamical models of NS and LS in CDN are proposed, and the corresponding assumptions are given. Secondly, based on Lyapunov stability theory, the controller of NS and the ATO of LS are designed so that the state of NS can asymptotically track the given reference signal. Finally, the effectiveness of the proposed control strategy in this paper is verified by the numerical simulation example with N two-links robots. Abbreviations: ATO: auxiliary tracking objectives; CDN: complex dynamical network; LS: links subsystem; MDE: matrix differential equation; NS: nodes subsystem; SDT:second derivative term; VDE: vector differential equation; [ABSTRACT FROM AUTHOR]

With the continuous development and progress of wireless self-organizing network communication technology, how to carry out long-distance cooperative control of multiple intelligences under the framework of an air–ground integrated wireless high-mobility self-organizing network has become a hot and difficult topic that needs to be solved urgently. This paper takes the air–ground integrated wireless high-mobility self-organizing network system as the basic framework and focuses on solving the long-distance cooperative fault-tolerant control of multi-intelligent bodies and the topological stability of a wireless mobile self-organizing network. To solve the above problems, a direct neural network with a robust adaptive fault-tolerant controller is designed in this paper. By constructing a symmetric population neural network model and combining it with the Lyapunov stabilization criterion, the system feedback matrix K has the ability of autonomous adaptive learning, and symmetrically distorts, rotates, or scales the training data to instantly adjust the system's fault-tolerant corrections and adaptive adjusting factors to resist the unknown disturbances and faults, to achieve the goals of multi-intelligent body stable control and the stable operation of a wireless high-mobility self-organizing network topology. Simulation results show that with the feedback adjustment of the multi-system under the designed controller, the multi-system as a whole has good fault-tolerant performance and autonomous learning approximation performance, and the tracking error asymptotically converges to zero. The experimental results show that the multi-flight subsystems fly stably, the air–ground integrated wireless high-mobility self-organizing network topology has good stability performance, and the maximum relative improvement of the topology stability performance is 50%. [ABSTRACT FROM AUTHOR]

Lower limb augmentation exoskeletons (LLAE) have been applied in several domains to enforce human walking capability. As humans can adjust their joint moments and generate different amounts of mechanical energy while walking on different terrains, the LLAEs should provide adaptive augmented torques to the wearer in multi-terrain environments, which requires LLAEs to implement accurate terrain parameter recognition. However, the outputs of previous terrain parameter recognition algorithms are more redundant, and the algorithms have higher computational complexity and are susceptible to external interference. Therefore, to resolve the above issues, this paper proposed a neural network regression (NNR)-based algorithm for terrain slope parameter recognition. In particular, this paper defined for the first time a unified representation of terrain parameters: terrain slope (TS), a single parameter that can provide enough information for exoskeleton control. In addition, our proposed NNR model uses only basic human parameters and LLAE joint motion posture measured by an Inertial Measurement Unit (IMU) as inputs to predict the TS, which is computationally simpler and less susceptible to interference. The model was evaluated using K-fold cross-validation and the results showed that the model had an average error of only 2.09 ∘ . To further validate the effectiveness of the proposed algorithm, it was verified on a homemade LLAE and the experimental results showed that the proposed TS parameter recognition algorithm only produces an average error of 3.73 ∘ in multi-terrain environments. The defined terrain parameters can meet the control requirements of LLAE in urban multi-terrain environments. The proposed TS parameter recognition algorithm could facilitate the optimization of the adaptive gait control of the exoskeleton system and improve user experience, energy efficiency, and overall comfort. [ABSTRACT FROM AUTHOR]

The fluctuations in power output from distributed power sources are rapid and dramatic, causing voltage fluctuations in the distribution network that threaten the safety of electricity consumption. Soft open points (SOPs) can replace traditional contact switches and are expected to suppress voltage fluctuations. However, traditional power regulation methods based on the reference values are unable to address rapid and large voltage fluctuations. Therefore, this paper proposes an adaptive power control method for SOPs based on virtual impedance. The SOP is modeled as a series link of adjustable impedance and a voltage source. Then, the voltage difference component is used to calculate the reference for the DQ domain to regulate the power flow in real time automatically. By doing so, the proposed method can smooth the voltage fluctuations in the distribution network. Additionally, the virtual impedance is also optimized to minimize the power loss. Finally, the method is validated through simulation and experiments, demonstrating that this method can automatically regulate power and significantly reduce voltage fluctuations. [ABSTRACT FROM AUTHOR]

Object tracking is one of the major tasks for mobile robots in many real-world applications. Also, artificial intelligence and automatic control techniques play an important role in enhancing the performance of mobile robot navigation. In contrast to previous simulation studies, this paper presents a new intelligent mobile robot for accomplishing multi-tasks by tracking red-green-blue (RGB) colored objects in a real experimental field. Moreover, a practical smart controller is developed based on adaptive fuzzy logic and custom proportional-integral-derivative (PID) schemes to achieve accurate tracking results, considering robot command delay and tolerance errors. The design of developed controllers implies some motion rules to mimic the knowledge of experienced operators. Twelve scenarios of three colored object combinations have been successfully tested and evaluated by using the developed controlled image-based robot tracker. Classical PID control failed to handle some tracking scenarios in this study. The proposed adaptive fuzzy PID control achieved the best accurate results with the minimum average final error of 13.8 cm to reach the colored targets, while our designed custom PID control is efficient in saving both average time and traveling distance of 6.6 s and 14.3 cm, respectively. These promising results demonstrate the feasibility of applying our developed image-based robotic system in a colored object-tracking environment to reduce human workloads. [ABSTRACT FROM AUTHOR]

In the traditional iterative learning control (ILC) method, the operational time interval is conventionally fixed to facilitate a seamless learning process along the iteration axis. However, this condition may frequently be contravened in real-time applications owing to unknown uncertainties and unpredictable factors. In essence, replicating a control system at a consistent time interval proves challenging in practical scenarios. This paper proposes an adaptive iterative learning control (AILC) method for the multi-input–multi-output (MIMO) nonlinear system with nonuniform trial lengths and an invertible control gain matrix. Compared to the existing AILC research that features nonuniform trial lengths, the control gain matrix of the system in this paper is assumed to be invertible. Hence, the general requirement in the conventional AILC method that the control gain matrix of the system is positive-definite (or negative-definite) or even known is relaxed. Moreover, the tracking reference allows it to be iteration-varying. Finally, to prove the convergence of the system, the composite energy function is introduced and to verify the validity of the AILC method, a robot movement imitation with an uncalibrated camera system is used. The simulation results show that the actual output can track the desired reference trajectory well, and the tracking error converges to zero after 30 iterations. [ABSTRACT FROM AUTHOR]

In this paper, for strict-feedback nonlinear systems with positive odd rational powers, the problem of adaptive fixed-time tracking control (FTTC) is considered. With the support of fixed-time theorem and adaptive backstepping method, this paper proposes a new globally adaptive FTTC strategy, which can overcome the singular problems caused by the derivation of virtual control signal. In addition, the proposed control scheme is a universal approach that can be applied to other types of nonlinear systems. Furthermore, the designed adaptive fixed-time tracking controller ensures the boundedness of all signals in the controlled system, and it guarantees the tracking error converges to a small neighbourhood near equilibrium in fixed-time. Finally, the simulation result further verifies the feasibility of the presented control scheme. [ABSTRACT FROM AUTHOR]

Fretting wear in the contact area between the aero-engine blade tenon and turbine disk mortise has an important influence on the performance of the aero-engine. In this paper, the tenon joint structure of the DZ125/FGH99 superalloy material is taken as the research object, and the finite element model of the fir-tree tenon joint structure is established. Through subroutine invocation and mesh adaptive control technology, the fretting wear problem of dissimilar material contact pairs under composite load is numerically studied. The results show that for the specific tenon joint structure and load and boundary conditions studied in this paper, the maximum wear occurs on the contact surface of the first tooth, and the surface will show different partial slip states in different load cycles. The slip region always extends from the two contact edges to the interior, and the upper side has a larger range. Wear has a significant effect on the stress distribution and stick–slip state of the contact surface. The second and third teeth have a small amount of wear and are basically in a stick state during the entire wear process. Therefore, wear has little effect on the stress distribution and the stick–slip state of the contact surface. This study reveals the coupling relationship between the fretting wear and contact state of the tenon joint structure. [ABSTRACT FROM AUTHOR]

This paper investigates the problem of spacing control between adjacent trains in train formation and proposes a distributed train-formation speed-convergence cooperative-control algorithm based on barrier Lyapunov function. Considering practical limitations such as communication distance and bandwidth constraints during operation, not all trains can directly communicate with the leader and obtain the expected trajectory it sends, making it difficult to maintain formation consistency as per the predetermined ideal state. Furthermore, to address the challenge of unknown external disturbances encountered by trains during operation, this paper designs a distributed observer deployed on each train in the formation. This observer can estimate and dynamically compensate for unknown reference trajectories and disturbances solely based on the states of adjacent trains. Additionally, to ensure that the spacing between adjacent trains remains within a predefined range, a safety hard constraint, this paper encodes the spacing hard constraint using barrier Lyapunov function. By integrating nonlinear adaptive control theory to handle model parameter uncertainties, a barrier Lyapunov function-based adaptive control method is proposed, which enables all trains to track the reference trajectory while ensuring that the spacing between them remains within the preset interval, therefore guaranteeing the asymptotic stability of the closed-loop system. Finally, a practical example using data from the Guangzhou Metro Line 22, specifically the route from Shiguang Road Station to Chentougang Station over three stations and two sections, is utilized to validate the effectiveness and robustness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

In this paper, an adaptive switching anti-disturbance attitude control scheme based on improved snake optimizer (SO) is proposed for quadrotor attitude control when a quadrotor unmanned aerial vehicle is affected by measurement noise. The adaptive switching disturbance rejection controller (AWDRC) is composed of linear active disturbance rejection control and adaptive switching extended state observer which is used to achieve accurate signals reconstruction performance under measurement noise. Then, the improved SO (ISO) algorithm is developed with quadratic interpolation and comprehensive learning strategies to obtain the optimal parameters of the quadrotor attitude controller. The performance validity of ISO is demonstrated here by experiments on the CEC-2017 and the CEC-2020 benchmark functions with several state-of-the-art meta-heuristic algorithms. Secondly, the proposed ISO-based AWDRC algorithm is used in quadrotor attitude tracking control and compared with three other excellent active disturbance rejection controllers in a comparative experiment, and the experimental results show the effectiveness of the proposal. Finally, the robustness of the proposed method to parameters perturbation of the quadrotor attitude system is analyzed by Monte Carlo experiments. [ABSTRACT FROM AUTHOR]

Assigning repetitive and physically demanding construction tasks to robots can alleviate human workers' exposure to occupational injuries, which often result in significant downtime or premature retirement. However, the successful delegation of construction tasks and the achievement of high-quality robot-constructed work requires transferring necessary dexterous and adaptive construction craft skills from workers to robots. Predefined motion planning scripts tend to generate rigid and collision-prone robotic behaviors in unstructured construction site environments. In contrast, imitation learning (IL) offers a more robust and flexible skill transfer scheme. However, the majority of IL algorithms rely on human workers repeatedly demonstrating task performance at full scale, which can be counterproductive and infeasible in the case of construction work. To address this concern, in this paper, we propose an immersive and Cloud Robotics-based virtual demonstration framework that serves two primary purposes. First, it digitalizes the demonstration process, eliminating the need for repetitive physical manipulation of heavy construction objects. Second, it employs a federated collection of reusable demonstrations that are transferable for similar tasks in the future and can, consequently, reduce the requirement for repetitive illustration of tasks by human agents. In addition, to enhance the trustworthiness, explainability, and ethical soundness of the robot training, this framework utilizes a hierarchical imitation learning (HIL) model to decompose human manipulation skills into sequential and reactive subskills. These two layers of skills are represented by deep generative models; these models enable adaptive control of robot action. The proposed framework has the potential to mitigate technical adoption barriers and facilitate the practical deployment of full-scale construction robots to perform a variety of tasks with human supervision. By delegating the physical strains of construction work to human-trained robots, this framework promotes the inclusion of workers with diverse physical capabilities and educational backgrounds within the construction industry. [ABSTRACT FROM AUTHOR]

Low power brushless direct current (BLDC) motors are used in many consumer appliances. These motors have a relatively high winding resistance and therefore current control loop can be avoided in some cases, but fast and accurate speed regulation can be still needed. To minimize harmonics and generated sound noise, improved sinusoidal pulse width modulation (PWM) has been tested in the paper. As the most suitable commutation type, the sine wave with the third harmonic component has been selected. This type of communication reduced the torque ripple of the motor. This paper analyses the possibility to improve traditional proportional-integral-derivative (PID) speed regulator with Fuzzy logic block. A simulation model of BLDC motor, inverter, speed detection circuit and controller have been created. Simulation results showed that by applying the Fuzzy-based PID controller, the transient time can be reduced from 0.2 s to 0.05 s and overshoot can be avoided in comparison with traditional PID controller. Experimental results show a significant improvement in the motor dynamics—the overshoot and transient time were reduced twice. The difference with simulation results and experimental ones can be explained by delays introduced by the microcontroller. [ABSTRACT FROM AUTHOR]

In order to effectively prevent and combat online public opinion crises triggered by major emergencies, this paper explores the dissemination mechanism of uncertain information on online social platforms. According to the decisionmaking behavior of netizens after receiving uncertain information, they are divided into eight categories. Considering that there will be a portion of netizens who clarify uncertain information after receiving it, this paper proposes a SEFTFbTbMR model of uncertain information clarification behavior. The propagation dynamics equations of the model are given based on the theory of differential equations, the basic regeneration number R0 of the model is calculated, and the existence and stability of the equilibrium point of the model are analyzed. The theoretical analysis of the model is validated using numerical simulation software, and sensitivity analysis is performed on the parameters related to R0. In order to reduce the influence caused by uncertain information, the optimal control strategy of the model is proposed using the Hamiltonian function. It is found that the dissemination of uncertain information among netizens can be suppressed by strengthening the regulation of social platforms, improving netizens' awareness of identifying the authenticity of information, and encouraging netizens to participate in the clarification of uncertain information. The results of this work can provide a theoretical basis for future research on the uncertain information dissemination mechanism triggered by major emergencies. In addition, the results can also provide methodological support for the relevant government departments to reduce the adverse effects caused by uncertain information in the future. [ABSTRACT FROM AUTHOR]

Introduction: Shape memory alloy (SMA) actuators are attractive options for robotic applications due to their salient features. So far, achieving precise control of SMA actuators and applying them to human-robot interaction scenarios remains a challenge. Methods: This paper proposes a novel approach to deal with the control problem of a SMA actuator. Departing from conventional mechanism models, we attempt to describe this nonlinear plant using a gray-box model, in which only the input current and the output displacement are measured. The control scheme consists of the model parameters updating and the control law calculation. The adaptation algorithm is founded on the multi-innovation concept and incorporates a dead-zone weighted factor, aiming to concurrently reduce computational complexities and enhance robustness properties. The control law is based on a PI controller, the gains of which are designed by the pole assignment technique. Theoretical analysis proves that the closed-loop performance can be ensured under mild conditions. Results: The experiments are first conducted through the Beckhoff controller. The comparative results suggest that the proposed adaptive PI control strategy exhibits broad applicability, particularly under load variations. Subsequently, the SMA actuator is designed and incorporated into the hand rehabilitation robot. System position tracking experiments and passive rehabilitation training experiments for various gestures are then conducted. The experimental outcomes demonstrate that the hand rehabilitation robot, utilizing the SMA actuator, achieves higher position tracking accuracy and a more stable system under the adaptive control strategy proposed in this paper. Simultaneously, it successfully accommodates hand rehabilitation movements for multiple gestures. Discussion: The adaptive controller proposed in this paper takes into account both the computational complexity of the model and the accuracy of the control results, Experimental results not only demonstrate the practicality and reliability of the controller but also attest to its potential application in humanmachine interaction within the field of neural rehabilitation. [ABSTRACT FROM AUTHOR]

Connected and automated vehicle platoons (CAVPs) are considered an effective way to alleviate traffic congestion, reduce the incidence of traffic accidents, and improve vehicle economy in the intelligent transportation system (ITS). Vehicles in the CAVPs can communicate with each other through V2X technology, which could optimize the economy of the platoon. Cooperative adaptive cruise control (CACC) can make effective use of the characteristics of CAVPs and contribute to resource conservation, ecological driving, and traffic system development. In this paper, a two-stage CACC method is proposed for CAVPs to reduce fuel consumption in the multislope road section. In the first stage, the optimal velocity profiles for the leader based on dynamic programming (DP) are planned according to the road information and the fuel consumption model. In the second stage, a vehicle longitudinal third-order differential dynamics model is utilized to build the platoon time-delay system considering communication delay and actuator delay. A feedback controller is developed for each vehicle considering the internal stability and the string stability of the CAVPs. Results show that the proposed method can save 5.33% of fuel consumption compared to the constant speed cooperative adaptive cruise control (CS-CACC) method and has a better tracking performance compared to the model predictive control (MPC) method. The CACC method proposed in this paper can provide a theoretical basis and data support for building an ecological CACC strategy for CAVPs. [ABSTRACT FROM AUTHOR]

IEEE SASO (Self-Adapting and Self-Organizing Systems) is the premier international conference for computer systems and networks that autonomously change some aspect of themselves: code, form, function, shape, structure, components, and so on. Over the past 10 years, it has emerged as a key multidisciplinary event for sharing theoretical insights and technical innovations across the numerous scientific fields and application domains impacted by this research. In 2013, the conference was hosted by Drexel University in Philadelphia, Pennsylvania, and offered an extensive program of high-quality papers. This special issue of ACM TAAS presents selected, revised, and extended best articles, which showcase the rich variety and depth of the SASO scientific community. [ABSTRACT FROM AUTHOR]

Grey balance plays an important role in determining the device values needed to reproduce colours which appear achromatic throughout the tonal range. However, complete observer adaptation to the media white rarely occurs, and these designated device values can still appear non-neutral. This poses a problem for cross-media reproductions, where a mismatch in neutral colours is often the most noticeable difference between them. This paper presents two related experiments which investigate a means of gaining better visual agreement between reproductions which have different background colours or media whites. The first quantifies the degree of adjustment (the degree of media relative transform) needed to make an appearance match between grey patches on a white background and on background colours of various hues and colourfulness. It was found that the degree of adjustment was near-linearly related to the luminance of the patch itself, with lighter patches requiring greater adjustment towards the background colour. Neither the hue nor the chroma of the patch's background had any significant effect on the underlying function. In the second experiment, this concept is applied to pictorial images on paper-coloured backgrounds. Three pixelwise rendering strategies were compared. In side-by-side viewing, the adaptive control of neutrals outperformed the media relative transform in all cases. Even for modest differences in paper colour (1Eab of 3), images with significant neutral content benefited from the adaptive approach. [ABSTRACT FROM AUTHOR]

It is very challenging for robots to perform grinding and polishing tasks on surfaces with unknown geometry. Most existing methods solve this problem by modeling the relationship between the force sensing information and surface normal vectors by analyzing the forces on special end tools such as spherical tools and cylindrical tools and simplified friction model. In this paper, we propose a normal vectors learning method to simultaneously control end-effector force and direction on unknown surfaces. First, the relation that mapping the force sensing information to the surface normal vectors is learned from the demonstrated data on the known plane using locally weighted regression. Next, the learned relation is used to estimate surface normal vectors on the unknown surface. To improve the force control precision on the unknown geometry surface, the adaptive force control is developed. To improve the direction control precision due to friction, the iterative learning control is developed. The proposed method is verified by comparative simulations and experiments using the Franka robot. Results show that the end-effector can be controlled perpendicular to the surface with a certain force. [ABSTRACT FROM AUTHOR]

In the model (m:n), to improve the autonomous collaborative interception capability for air vehicle, a new autonomous cross-collaborative interception algorithm based on GTSMC (Global Terminal Sliding Mode Control) and real-time virtual geometry is proposed in this paper. Firstly, the conception of an autonomous cross-collaboration is defined and the multi-air vehicle for the multi- object interception problem is formulated. Then, this paper presents the dynamic situation assessment function, which considers the real-time flight status and cooperative status of the air vehicle during the interception of the object. At the same time, this paper states the condition of whether the air vehicle is in a cooperative state and proves it. After completing the dynamic situation assessment, and considering the dynamic of the air vehicles, a new controller is designed by using GTSMC and the idea of backstepping method. Simultaneously, this paper gives a stability analysis of the closed-loop system by using Lyapunov theory. Finally, to demonstrate the effectiveness of the proposed algorithm, several simulation cases which consider different interception scenarios are given. The simulation results show that the new collaborative interception algorithm can provide better autonomous cross-collaborative interception capability and higher accuracy. [ABSTRACT FROM AUTHOR]

The IEEE International Conference on Self-Adapting and Self-Organizing Systems (SASO) is the main forum for studying and discussing the foundations of a principled approach to engineering systems, networks, and services based on self-adaptation and self-organization. Over the past decade, it has consolidated as the primary scientific conference for sharing ideas on algorithms, technologies, tools and applications across a wide range of scientific fields. In 2016, the conference was hosted by the University of Augsburg, in Augsburg, Germany; its scientific program comprised full papers, short papers, poster and demo presentations, workshops, doctoral symposium and tutorials. This special issue of ACM TAAS champions some of the most solid research results of SASO 2016, presenting selected, revised and extended best articles. [ABSTRACT FROM AUTHOR]

Photovoltaic inverters are widely utilized in microgrid systems working as the key equipment for converting solar energy into usable electricity. This paper presents a fuzzy sliding mode control (FSMC) method for the photovoltaic inverter in a microgrid. The inverter module uses voltage control to achieve stable AC output voltage. Moreover, to deal with system uncertainty and non-linearity in the photovoltaic inverter, a fuzzy controller was designed to realize real-time adaptation of the gains of the constant term and the reaching term in the sliding mode control law, which serves as a compensating controller for traditional sliding mode control. The gains of the exponential reaching law can be adjusted according to the system state instead of fixed gains, which can effectively reduce the chattering phenomenon and improve the robustness of the photovoltaic microgrid. Finally, the Lyapunov stability theory was used to ensure the stability of the entire control system, achieving a high-performance independent power supply for loads in a microgrid. Simulation results show that the designed control system is more robust to load disturbances and has superior dynamic performance. [ABSTRACT FROM AUTHOR]

In this paper, a Multi-Index Nonlinear Robust Adaptive Control (MINRAC) method was proposed for ultra-complex multi-input multi-output power systems with uncertain parameter factors and external disturbances. The controller designed by this method has excellent static and dynamic characteristics. Under the condition of the uncertainty of system parameters and external disturbance at the same time, the MINRAC method can ensure that the multiple indexes concerned by ultra-complex power systems can be controlled at their expected values. The simulation results showed that the control mechanism of MINRAC method was consistent in both single-machine infinite bus system and multi-machine interconnected coupling system. The output function chooses power angle, angular frequency and terminal voltage as constraints. When the system has parameter uncertainty and external interference, the uncertain parameter values are adjusted by adaptive control to force these indicators to tend to the given expected value. For three-phase short circuit, which is the most serious fault in power system, the use of multi index nonlinear robust controller can ensure that the system is stable in a wide range and has better dynamic performance. [ABSTRACT FROM AUTHOR]

This paper focuses on the study of the tracking performance of a novel two-degrees-of-freedom (two-DOF) voice coil motor (VCM). Intelligent control algorithms estimate the motor control model by the relationship between the input and output values, and it is hard to achieve excellent tracking performance due to the wider variational range of motor electromagnetic parameters (MEPs). This paper proposes estimated methods for MEPs and an adaptive feedforward control algorithm based on estimated MEPs (ACBE). ACBE can alter its control parameters from inside out in time with the change in MEPs. Experiments are carried out to verify that the proposed ACBE realized excellent tracking performance upon the novel two-DOF VCM. This study indicates that an adaptive control algorithm with high-precision control parameters has better tracking performance upon a motor control model with large variation. [ABSTRACT FROM AUTHOR]

Copyright of Przeglad Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper addresses the challenge of adaptive control for nonstrict-feedback nonlinear systems that involve input delay, actuator faults, and external disturbance. To deal with the complexities arising from input delay and unknown functions, we have incorporated Pade approximation and radial basis function neural networks, respectively. An adaptive controller has been developed by utilizing the Lyapunov stability theorem and the backstepping approach. The suggested method guarantees that the tracking error converges to a compact neighborhood that contains the origin and that every signal in the closed-loop system is semi-globally uniformly ultimately bounded. To demonstrate the efficacy of the proposed method, an electromechanical system application example, and a numerical example are provided. Additionally, comparative analysis was conducted between the Pade approximation proposed in this paper and the auxiliary systems in the existing method. Furthermore, error assessment criteria have been employed to substantiate the effectiveness of the proposed method by comparing it with existing results. [ABSTRACT FROM AUTHOR]

This paper presents a new direct adaptive control (DAC) technique using Caputo's definition of the fractional-order derivative. This is the first time a fractional-order adaptive law is introduced to work together with an integer-order stable manifold for approximating the uncertainty of a class of nonlinear systems. The DAC approach uses universal function approximators such as multi-layer perceptrons with one hidden layer or fuzzy systems to approximate the controller. This paper presents a new lemma, which elucidates and clarifies the link between the Caputo and the Riemann–Liouville definitions. The introduced lemma is useful in developing a Lyapunov candidate to prove the stability of using the proposed fractional-order adaptive law. This is further explained by a numerical example, which is provided to elucidate the practicality of using the fractional-order derivative for updating the approximator parameters. The main novelty of the results in this paper is a rigorous stability proof of the fractional DAC approach for a class of nonlinear systems that is subjected to unstructured uncertainty and deals with the adaptation mechanism using a traditional integer-order stable manifold. This makes the control scheme easier to implement in practice. The fractional-order adaptation law provides greater degrees of freedom and a potentially larger functional control structure than the conventional adaptive control. Finally, the paper demonstrates that traditional integer-order DAC is a special case of the more general fractional-order DAC scheme introduced here. [ABSTRACT FROM AUTHOR]

This paper addresses the control task of a wireless power transfer (WPT) charger designed for electric vehicles (EVs). The challenge is to maintain a constant battery charging current when the WPT is controlled on the ground side. Indeed, the intermittent latency involved in the wireless data communication between the ground and vehicle sides leads to system instability. To overcome this issue, a new control approach has been proposed in this paper. The proposed technique ensures indirect control of the battery charging current through control of the current on the ground side. The control technique relies on an adaptive hill-climbing algorithm in conjunction with a PI-based controller. The adaptive parameter is adjusted online, during the operation of the charger, only when a new measure of the battery charging current is received on the primary side. This makes it possible to avoid the need for real-time wireless data communication. It should be noted that this aspect is crucial in ensuring the controller's robustness and stability of the system regardless of potential delays in wireless communication and large misalignments between the coils. The validity of the proposed control technique has been confirmed through simulation. In addition, experimental validation, using a laboratory test bed, demonstrated satisfactory results. [ABSTRACT FROM AUTHOR]

With the rapid progress of big data and artificial intelligence, machine learning technologies such as learning and adaptive control have emerged as a research focus in petroleum engineering. They have various applications in oilfield development, such as parameter prediction, optimization scheme deployment, and performance evaluation. This paper provides a comprehensive review of these applications in three key scenarios of petroleum engineering, namely hydraulic fracturing and acidizing, chemical flooding and gas flooding, and water injection. This article first introduces the steps and methods of machine learning processing in these scenarios, then discusses the advantages, disadvantages, existing challenges, and future prospects of these machine learning methods. Furthermore, this article compares and contrasts the strengths and weaknesses of these machine learning methods, aiming to help researchers select and improve their methods. Finally, this paper identifies some potential development trends and research directions of machine learning in petroleum engineering based on the current issues. [ABSTRACT FROM AUTHOR]

This paper explores the fault-tolerant cooperative control of multiagent systems, which are modeled via an uncertain leader system and multiple uncertain Euler–Lagrange systems with actuator faults. A self-adjusting observer is initially proposed to estimate the signal of the uncertain leader for different followers and compute the observer gain in real time. An adaptive fault-tolerant controller is designed based on the above observer and nonsingular fast terminal sliding mode surface. This controller estimates lumped uncertainty and ensures that tracking errors are ultimately bounded. The controller designed in this paper has the following three advantages. Firstly, the observer can estimate and transmit the leader's state to each follower even without precise knowledge of the leader's system matrix. Secondly, the controller is robust to actuator faults, uncertain parameters and external disturbances, the upper bounds of which can be arbitrarily large and unidentified. Thirdly, the controller has a simple structure and is also suitable for situations where the actuator is healthy. Lastly, simulations are provided to demonstrate the effectiveness of both the observer and the controller with or without actuator fault. [ABSTRACT FROM AUTHOR]

This survey paper explores advanced nonlinear control strategies for Unmanned Aerial Vehicles (UAVs), including systems such as the Twin Rotor MIMO system (TRMS) and quadrotors. UAVs, with their high nonlinearity and significant coupling effects, serve as crucial benchmarks for testing control algorithms. Integration of sophisticated sensors enhances UAV versatility, making traditional linear control techniques less effective. Advanced nonlinear strategies, including sensor-based adaptive controls and AI, are increasingly essential. Recent years have seen the development of diverse sliding surface-based, sensor-driven, and hybrid control strategies for UAVs, offering superior performance over linear methods. This paper reviews the significance of these strategies, emphasizing their role in addressing UAV complexities and outlining future research directions. [ABSTRACT FROM AUTHOR]

As a specific task for unmanned tracked vehicles, leader-following imposes high-precision requirements on the vehicle's motion control, especially the steering control. However, due to characteristics such as the frequent changes in off-road terrain and steering resistance coefficients, controlling tracked vehicles poses significant challenges, making it difficult to achieve stable and precise leader-following. This paper decouples the leader-following control into speed and curvature control to address such issues. It utilizes model reference adaptive control to establish reference models for the speed and curvature subsystems and designs corresponding parameter adaptive control laws. This control method enables the actual vehicle speed and curvature to effectively track the response of the reference model, thereby addressing the impact of frequent changes in the steering resistance coefficient. Furthermore, this paper demonstrates significant improvements in leader-following performance through a series of simulations and experiments. Compared with the traditional PID control method, the results shows that the maximum following distance has been reduced by at least approximately 12% (ensuring the ability to keep up with the leader), the braking distance has effectively decreased by 22% (ensuring a safe distance in an emergency braking scenario and improving energy recovery), the curvature tracking accuracy has improved by at least 11% (improving steering performance), and the speed tracking accuracy has increased by at least 3.5% (improving following performance). [ABSTRACT FROM AUTHOR]

The structural performance of critical infrastructure during extreme events requires testing to understand the complex dynamics. Shake table testing of buildings to evaluate structural integrity is expensive and requires special facilities that can allow for the construction of large-scale test specimens. An attractive alternative is a cyber-physical testing technique known as Real-Time Hybrid Simulation (RTHS), where a large-scale structure is decomposed into physical and numerical substructures. A transfer system creates the interface between physical and numerical substructures. The challenge occurs when using multiple actuators connected with a coupler (i.e., transfer system) to create translation and rotation at the interface. Tracking control strategies aim to reduce time delay errors to create the desired displacements that account for the complex dynamics. This paper proposes two adaptive control methodologies for multi- axial real-time hybrid simulations that improve capabilities for a higher degree of coupling, boundary, complexity, and noise reduction. One control method integrates the feedback proportional derivative integrator (PID) control with a conditional adaptive time series (CATS) compensation and inverse decoupler. The second proposed control method is based on a coupled Model Predictive Control (MPC) with the CATS compensation. The performance of the proposed methods is evaluated using the virtual multi-axial benchmark control problem consisting of a steel frame as the experimental substructure. The transfer system consists of a coupler that connects two hydraulic actuators generating the translation and rotation acting at the joint. Through sensitivity analysis, parameters were tuned for the decoupler components, CATS compensation, and the control design for PID, LQG, and MPC. Comparative results among different control methods are evaluated based on performance criteria, including critical factors such as reduction in the time delay of bothactuators. The research findings in this paper improve the tracking control systems for the multi-axial RTHS of building structures subjected to earthquake loading. It provides insight into the robustness of the proposed tracking control methods in addressing uncertainty and improves the understanding of multiple output controllers that could be used in future cyber-physical testing of civil infrastructure subjected to natural hazards. [ABSTRACT FROM AUTHOR]

This paper is concerned with the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. In contrast to existing synchronization network models, the current study considers both internal time‐varying delays and coupling time‐varying delays. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a new inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. To demonstrate the effectiveness of the present approach, simulation results are illustrated. In this paper, we consider the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. Different from the existing synchronization of the networks model, we take the internal time‐varying delays and the coupling time‐varying delays into account. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a novel inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. [ABSTRACT FROM AUTHOR]

Cooperative adaptive cruise control (CACC) is one of the main features of connected and autonomous vehicles (CAVs), which uses connectivity to improve the efficiency of adaptive cruise control (ACC). The addition of reliable communication systems to ACC reduces fuel consumption, maximizes road capacity, and ensures traffic safety. However, the performance, stability, and safety of CACC could be affected by the transmission of outdated data caused by communication delays. This paper proposes a Lyapunov-based nonlinear controller to mitigate the impact of time-varying delays in the communication channel of CACC. This paper uses Lyapunov–Krasovskii functionals in the stability analysis to ensure semi-global uniformly ultimately bounded tracking. The efficaciousness of the proposed CACC algorithm is demonstrated in simulation and through experimental implementation. [ABSTRACT FROM AUTHOR]

The DC distribution network is a low-inertia system, which is very sensitive to load disturbance, system failure, and other factors. By adding virtual capacitance to the converter connected to the power supply, the virtual inertia of the DC power grid can be improved. Firstly, this paper proposes a strategy for adjusting virtual capacitance based on the voltage change rate to achieve adaptive control of virtual inertia, which enables the converter to quickly absorb or release energy during power fluctuations. Secondly, the adaptivity of the strategy is improved and the main control parameters in the proposed control method are qualitatively analyzed. Finally, the four-terminal photovoltaic storage DC distribution network system is constructed. Through Simulink, the adaptive virtual inertia control is incorporated on the battery side to simulate and validate the effectiveness of the strategy and the rationality of parameter analysis. The results show that this method can provide flexible and adjustable inertia support for DC grids and improve the voltage stability of DC grids. [ABSTRACT FROM AUTHOR]