Search

Introduction. Heat treatment of food provides appropriate shelf life and safety, as well as adequate sensory properties and better digestibility, but excessive thermal processing leads to the loss of nutritive value. In practice, sterilised meat products are usually overheated, which leads to a loss of nutritive value. Therefore, it is necessary to find the optimum between the preservative effect of heat treatment and maintenance of the nutritive value of food. Control of the sterilisation efficiency is based on the Fo value, an indicator of the lethal effect of heat treatment, while the cooking (Co) value indicates a reduction of the nutritive value of heat treated products. Materials and Methods. During pâté sterilisation processes, two working heat treatment regimes were used: the regime used in regular, commercial production and an optimised regime. Heat treatment measurements were carried out using six thermocouple probes placed in the geothermal centres of six chosen cans. For each heat treatment, schematic diagrams were produced. Fo values were determined using Ellab software, and Co values by the graphic method in a semi-logarithmic Thermal Death Time diagram. Results and Conclusions. During pâté sterilisation, where the effective time was 55 minutes (regular regime) at 114°C and 3.2 bar pressure, an average Fo value of 7.90±0.43 was achieved. By reducing the effective sterilisation time to 45 minutes (optimised regime), an average Fo value of 3.81±0.5 was achieved. Both regimes were sufficient to ensure product safety (Fo >3). The average Co value for the regular sterilisation regime was 109.83±1.33 minutes, while for the optimised regime, it was 88.67±4.27 minutes, i.e., an average reduction of 19.26%. This corresponds to a proportionally higher nutritional value of the product treated using the optimised regime. Data on the Fo and Co values achieved during the sterilisation process can make a significant contribution to obtaining products with a better nutritional value through an optimised sterilisation process, without jeopardising product safety. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III46009]

Tokom 2012. godine sprovedena su istraživanja higijene procesa proizvodnje trupova brojlera, na tri klanice u Republici Srbiji. Ispitano je 150 uzoraka kožica vrata brojlera i utvrđeno je 17 izolata salmonela. Izolati su, korišćenjem odgovarajućih monovalentnih i polivalentnih seruma, tipizovani kao Salmonella enterica subspecies enterica serovar infantis (S. Infantis 6, 7, r, 1, 5). U slučajevima oboljenja ljudi, izolovano je 5 uzoraka salmonele identičnog serovarijeteta. Nakon toga, na 22 uzorka, rađeno je ispitivanje antibiotske rezistencije izolata disk difuzionim testom. Izolati su pokazali rezistentnost prema: ampicilinu i nalidiksičnoj kiselini (95,5%), tetraciklinu (91%), cefotaksim/klavulanskoj kiselini (68,2%), ali ne i prema ciprofloksacinu, gentamicinu i trimetoprim/sulfametoksazolu (0%). Stepen genetske sličnosti izolata poreklom od obolelih ljudi i sa trupova brojlera je određen molekularnim metodama. Analiza klastera je pokazala prisustvo 7 profila, dok svi izolati imaju 92% ge netske sličnosti. Iako postoje razlike u antimikrobnoj rezistenciji izolata poreklom od obolelih ljudi i sa kožica vrata brojlera, ne može se isključiti epidemiološka povezanost, jer kod dominantnog genotipa SINFXB0001, utvrđenog kod 8 izolata poreklom od obolelih ljudi (3 izolata) i sa kožica vrata brojlera (5 izolata), postoji genetska sličnost od 100%. Na osnovu dobijenih rezultata, istraživanje je pokazalo da prisustvo S. Infantis na trupovima brojlera predstavlja hazard po zdravlje ljudi.

The aim of this work is to ensure the safety of finely chopped cooked sausages stuffed in a cellulose casing, diameter 21 mm. Safety is ensured by thermal treatment of the level of pasteurization in a chamber under a defined thermal treatment program. By monitoring the temperature in the product's thermal center at different control positions in the chamber, temperatures of 75.26℃-77.11℃ were determined with a thermocouple. In doing so, the products spent 8-9 minutes at a temperature higher than 70℃, and 18-20 minutes at a temperature higher than 55℃. Considering that it is a small diameter product, the heat intensively penetrates to the thermal center and thus ensures the safety of the product. However, due to the relatively short time of the heat treatment, the pasteurization values (pv) at the control points were in the range of 18.3-26 minutes. Therefore, we conclude that ensuring the safety of products with a narrower diameter is achieved only by controlling the temperature in the thermal center of the product, and not with pv values. Considering that this sausage is a perishable product, it is necessary to provide a proper cold chain (0-4℃) after manufacture so that the product remains suitable for consumption within the period defined in a shelf-life study. [ABSTRACT FROM AUTHOR]

Consumption of Toxoplasma gondii contaminated pork is a major risk factor for human infection. We thus conducted a cross-sectional survey on the seroprevalence of T. gondii infection in a representative sample of slaughter pigs from throughout Serbia and examined the influence of farm biosecurity-related risk factors on infection. In addition, direct detection of the parasite (by mouse bioassay) or its DNA was performed in the hearts of a subset of seropositive sows. The overall seroprevalence in the sample of 825 pigs as determined by the modified agglutination test (MAT) was 16.5%. Older age and inadequate rodent control were independent infection risk factors for pigs. In a subset of 581 pigs with complete biosecurity-related data, in addition to older age, smallholders' finishing type farms (as opposed to farrow-to-finish), multispecies farming, and origin from Western and Central and South-Eastern Serbia (vs. the Northern region), all increased the risk of infection, while the absence of disinfection boot-dips in front of each barn and Belgrade district origin (vs. the Northern region) were associated with a 62% and 75% lower risk of infection, respectively. Evidence of viable parasites was obtained in 13 (41.9%) of the 31 bioassayed sow hearts, of which by isolation of brain cysts in seven, by detection of T. gondii DNA in an additional four, and by serology in another two. Recovery of brain cysts mostly (5/7) from sows with a MAT titre of ≥1:100 indicates the risk for consumers. These results highlight the public health risk from pork consumption and point to mandatory use of professional rodent control services, abstaining from multispecies farming, keeping disinfection boot-dips clean and freshly refilled, as well as strict implementation of zoo-hygienic measures on smallholders' farms as specific farm biosecurity measures needed for its reduction. [ABSTRACT FROM AUTHOR]

Introduction. Heat treatment of food provides appropriate shelf life and safety, as well as adequate sensory properties and better digestibility, but excessive thermal processing leads to the loss of nutritive value. In practice, sterilised meat products are usually overheated, which leads to a loss of nutritive value. Therefore, it is necessary to find the optimum between the preservative effect of heat treatment and maintenance of the nutritive value of food. Control of the sterilisation efficiency is based on the Fo value, an indicator of the lethal effect of heat treatment, while the cooking (Co) value indicates a reduction of the nutritive value of heat treated products. Materials and Methods. During pâté sterilisation processes, two working heat treatment regimes were used: the regime used in regular, commercial production and an optimised regime. Heat treatment measurements were carried out using six thermocouple probes placed in the geothermal centres of six chosen cans. For each heat treatment, schematic diagrams were produced. Fo values were determined using Ellab software, and Co values by the graphic method in a semi-logarithmic Thermal Death Time diagram. Results and Conclusions. During pâté sterilisation, where the effective time was 55 minutes (regular regime) at 114 °C and 3.2 bar pressure, an average Fo value of 7.90±0.43 was achieved. By reducing the effective sterilisation time to 45 minutes (optimised regime), an average Fo value of 3.81±0.5 was achieved. Both regimes were sufficient to ensure product safety (Fo >3). The average Co value for the regular sterilisation regime was 109.83±1.33 minutes, while for the optimised regime, it was 88.67±4.27 minutes, i.e., an average reduction of 19.26%. This corresponds to a proportionally higher nutritional value of the product treated using the optimised regime. Data on the Fo and Co values achieved during the sterilisation process can make a significant contribution to obtaining products with a better nutritional value through an optimised sterilisation process, without jeopardising product safety. [ABSTRACT FROM AUTHOR]