Search

Microemulsions (MEs) were designed by an innovative rational development, characterized, and used to load up to 20mM of Tamoxifen citrate (TMX). They were made with acceptable and well-characterized excipients for all the routes of administration. Some of their properties, such as nanometric mean size and long stability shelf life, make them interesting drug delivery systems. The results obtained after the in vitro inhibition of estradiol-induced proliferation in MCF-7 breast cancer cells demonstrated a significant effect in cell growth. A decreasing of at least 90% in viable cells was shown after the incubation with MEs containing 20mM of TMX. Besides, two compositions which loaded 10mMof drug showed a cytotoxic effect higher than 70%. These results encourage the evaluation of alternative protocols for this drug administration, not only for estrogen receptor (ER) positive tumors, but also for ER negative. [ABSTRACT FROM AUTHOR]

Microspheres of Bacillus subtilis were prepared using sodium alginate. Some typical properties of microencapsulated systems, such as microorganism content, particle size, and germination time, were studied. Calcium alginate microspheres were obtained by the emulsification method, dripping into a solution of calcium salt. The conditions of the preparation steps were very seft to produce calcium alginate microspheres containing cells with no apparent changes in general biological properties. The hydrogel matrix provides protection without preventing communication with the surrounding medium. [ABSTRACT FROM AUTHOR]

Seminal hyperviscosity is generally thought to reveal genitourinary infection. The aim of the present work was to study this hypothesis. A total of 65 semen samples were obtained from males presenting for infertility screening. The samples were evaluated according to WHO criteria and microbiologically investigated, including culturing for Mycoplasma hominis and Ureaplasma urealyticum, and microscopic observation of Chlamydia trachomatis by a direct fluorescence assay. Determination of local antisperm antibodies was performed. Semen was categorized according to consistency: normal (n = 31) and high (n = 34). No difference was recorded either in the number of positive cultures, or in the number of species found in each sample. The number of white blood cells and the percentage of antibody-bound sperm showed no difference in the groups under study. There was no association between seminal hyperviscosity, positivity in semen cultures, number of species isolated in semen cultures, leukospermia, or presence of sperm antibodies. Further studies should be performed considering the evolution of the genital-infected patients to clarify the etiology of the hyperviscosity. [ABSTRACT FROM AUTHOR]

The effectiveness of any cosmetic product containing a functional ingredient is determined by the skin delivery of the active molecule, which is influenced by the type of carrier and the molecule itself. Furthermore, the functional ingredient should be stable in the formulation. The purpose of this paper is to study the stability of lipoic acid in the presence of vitamins A (as palmitate) and E (as acetate) in semisolids for cosmetic use. The systems formulated were studied in regard to their aspect, pH, stability under centrifugation and rheological behavior. The chemical analyses of lipoic acid and vitamins A and E were carried out by HPLC after studying the specificity of the method employed in each case. The quantitation of the active principles was performed by HPLC with C18 (5 μm) columns. The mobile phase was methanol for the vitamins, with spectrophotometric detection at 325 nm for vitamin A and 230 nm for vitamin E. The mobile phase for lipoic acid was methanol : water (80 : 20) and phosphoric acid at pH 3.0, with spectrophotometric detection at 332 nm. All systems were stable to centrifugation, and no significant modification of rheological behavior was observed in relation to the base emulsion used as control. The chemical studies performed indicated that although lipoic acid is not very stable in these formulations, the presence of vitamin A favors its chemical stability. [ABSTRACT FROM AUTHOR]

Microemulsions (MEs) and self-emulsifying drug delivery systems (SEEDS) containing phenobarbital (Phe) were developed to improve its chemical stability, solubilizing capacity and taste-masking in oral liquid dosage forms. Cremophor® RH40 and Labrasol® were used as surfactants for the screening of ME regions, Capmul® MCM L, Captex® 355, Imwitor® 408, Myglyol® 840 and Isopropyl myristate were the oil phases assayed; Transcutol® P, Polyethylene-glycol 400, glycerol, Propylene-glycol and ethanol the cosurfactants. Phe stability assay was carried out (20:4:20:56% and 20:4:35:41% (w/w); surfactant:oily phase:cosurfactant:water) for both surfactants; only one containing ethanol showed significant dismissing in its drug content. Solubility capacity for these selected formulations were also evaluated, an amount between 17 and 58 mg/mL of Phe could be loaded. At last, an optimized ME formulation with Cremophor® RH40 20%, Capmul® MCM L 4%, PEG 400 35% and sucralose 2% (w/w) was chosen in order to optimize taste-masking using an electronic tongue. Strawberry along with banana and tutti-frutti flavors plus mint flavor proved to be the best ones. Labrasol-based pre-concentrates were tested for (micro)emulsifying properties; all of them resulted to behave as SEDDS. In summary, a rationale experimental design conducted to an optimized ME for Phe oral pediatric administration which was able to load 5-fold times the currently used dose (4 mg/mL), with no sign of physical or chemical instability and with improved taste; SEDDS for capsule filling were also obtained. The biopharmaceutical advantages described for these dosage forms encourage furthering in vivo evaluation.

The self-assembly process is a valuable tool for constructing nano and microstructures. Microtubes (MTs) self-assembled from amphiphiles are novel promising nanomaterials as they have easy self-assembly in aqueous solutions, reproducibility and biocompatibility. The incorporation of amphotericin B (AmB) into lipid microtubes formed from 12-hydroxystearic acid (12HSA) when mixed with ethanolamine in aqueous media was investigated. MTs of several concentrations of lipid material and AmB were prepared. The structure was characterized by phase-contrast microscopy, TEM and SEM. The type of interaction was analyzed by FTIR and DSC. Stability studies were carried out at room temperature and at 4 °C. Loading efficiency of the system was found to be much higher than the drug solubility in water. MTs with 1% of 12HSA and 1 mg/ml of AmB showed to be the most stable formulation. In vitro skin penetration assay showed a flux of 18.20±3.35 μg/cm(2). Amb-loaded MTs in vitro antifungal activity was evaluated and formulation showed similar results to that of AmB deoxycholate showing that AmB retained its antifungal activity in the MTs formulation., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The aim of this work was to evaluate water-lecithin-dispersions (WLDs) as carriers for amphotericin B (AmB) and to compare the drug solubility in WLDs and O/W lecithin-based submicron emulsions (SMEs) in order to evaluate the influence of lecithin content on the dosage form solubilization of the active compound. WLDs and different SMEs with either 1.2 or 2.4% of lecithin were prepared. WLD with 2.4% lecithin show a 10-fold increase in solubilization of AmB compared with 1.2% lecithin WLD. SMEs with 1.2% lecithin show an increase of over 400 times in solubilization compared with WLD containing the same concentration of lecithin, whereas SMEs with 2.4% lecithin show an increase of over 40 times compared with the corresponding WLD. Drug solubilization in SMEs with 2.4% lecithin is not significantly greater than in those containing 1.2% lecithin. The content of surfactant Brij 97 ® had a significant influence on drug solubilization in SMEs (P < 0.05). Results indicate that indicate that SMEs are proper systems to solubilize AmB. It can be assumed that solubilization is due to the formulation microstructure and not to the separate components themselves.

Five New World (NW) arenaviruses cause human hemorrhagic fevers. Four of these arenaviruses are known to enter cells by binding human transferrin receptor 1 (hTfR1). Here we show that the fifth arenavirus, Chapare virus, similarly uses hTfR1. We also identify an anti-hTfR1 antibody, ch128.1, which efficiently inhibits entry mediated by the glycoproteins of all five viruses, as well as replication of infectious Junín virus. Our data indicate that all NW hemorrhagic fever arenaviruses utilize a common hTfR1 apical-domain epitope and suggest that therapeutic agents targeting this epitope, including ch128.1 itself, can be broadly effective in treating South American hemorrhagic fevers.

The aim of the present work was to take advantage of lecithin's biocompatibility along with its physicochemical properties for the preparation of lecithin-based nanocarriers for small interfering RNA (siRNA) delivery. Water lecithin dispersions were prepared in different conditions, loaded with siRNA at different N/P ratios, and evaluated for loading capacity. The most appropriate ones were then assayed for cytotoxicity and characterized in terms of particle size distribution, zeta potential, and morphology. Results demonstrated that formulations prepared at pH 5.0 and 7.0 were able to load siRNA at broad N/P ratios, and cellular uptake assays showed an efficient delivery of oligos in MCF-7 human breast cancer cells; fluorescent-labeled dsRNA mainly located next to its target, near the nucleus of the cells. No signs of toxicity were observed for broad compositions of lecithin. The physicochemical characterization of the siRNA-loaded dispersions exhibited particles of nanometric sizes and pH-dependant shapes, which make them suitable for ex vivo and in vivo further evaluation.

The aim of this work was to study the iron uptake of Caco-2 cells incubated with five different formulations of liposomes containing iron. The vesicles were also characterized before, during, and after in vitro digestion. Caco-2 cells were incubated with digested and nondigested liposomes, and soluble iron uptake was determined. Nondigested liposomes made with chitosan (CHI) or the cationic lipid, DC-Cholesterol (DC-CHOL), generated the highest iron uptake. However, these two formulations were highly unstable under in vitro digestion, resulting in nonmeasurable iron uptake. Digested conventional liposomes composed of soybean phosphatidylcholine (SPC), hydrogentated phosphatidylcholine (HSPC), or HSPC and cholesterol (CHOL) presented the highest iron-uptake values. These liposomal formulations protected iron from oxidation and improved iron uptake from intestinal cells, compared to an aqueous solution of ferrous sulphate.

Conventional approaches for the detection of antibody dependent cell-mediated cytotoxicity (ADCC) activity rely on quantification of the release of traceable compounds from target cells or flow cytometry analysis of population-wide phenomena. We report a new method for the direct imaging and quantification of ADCC of cancer cells. The proposed method using imaging flow cytometry combines the statistical power of flow cytometry with the analytical advantages of cell imaging, providing a novel and more comprehensive perspective of effector/target cell interactions during ADCC events. With this method we can quantify and show in detail the morphological changes in target and effector cells, their apoptotic index, the physical interaction between effector and target cells, and a directional transfer of cytosolic contents from effector to target cells. As a model system we used the therapeutic anti-CD20 antibody rituximab to target CFSE labeled Ramos human Burkitt's lymphoma cells, to CMTPX-labeled human monocytic U-937 effector cells. We expect that similar studies using different effector and target cell populations may contribute to the pre-clinical evaluation of therapeutic antibodies and help to identify mechanisms that could be beneficial in the immunotherapy of cancer., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The present study aimed to evaluate different dosage forms, emulsions, emulgels, lipogels, and thickened microemulsion-based hydrogel, as fluconazole topical delivery systems with the purpose of determining a formulation with the capacity to deliver the whole active compound and maintain it within the skin so as to be considered a useful formulation either for topical mycosis treatment or as adjuvant in a combined therapy for Cutaneous Leishmaniasis. Propylene glycol and diethyleneglycol monoethyl ether were used for each dosage form as solvent for the drug and also as penetration enhancers. In vitro drug release after application of a clinically relevant dose of each formulation was evaluated and then microemulsions and lipogels were selected for the in vitro penetration and permeation study. Membranes of mixed cellulose esters and full-thickness pig ear skin were used for the in vitro studies. Candida albicans was used to test antifungal activity. A microemulsion containing diethyleneglycol monoethyl ether was found to be the optimum formulation as it was able to deliver the whole contained dose and enhance its skin penetration. Also this microemulsion showed the best performance in the antifungal activity test compared with the one containing propylene glycol. These results are according to previous reports of the advantages of microemulsions for topical administration and they are very promising for further clinical evaluation.

The aim of this work was to develop indinavir pediatric anti-HIV/AIDS formulations enabling convenient dose adjustment, ease of oral administration, and improved organoleptic properties by means of the generation of drug-loaded microparticles made of a polymer that is insoluble under intake conditions and dissolves fast in the stomach in order to completely release the active agent. Indinavir-loaded microparticles made of a pH-dependent polymeric excipient soluble at pH < 5, Eudragit E100, were prepared using a double emulsion solvent diffusion technique and the in vitro release profiles characterized. Finally, taste masking properties were evaluated in blind randomized sensory experiments by ten healthy human volunteers. The use of a w/o/o emulsion system resulted in indinavir loads around 90%. Thermal analysis of the microparticles by differential scanning calorimetry revealed that indinavir appeared mainly dispersed at the molecular level. Concentrations of residual organic solvents as determined by gas chromatography were below the upper limits specified by the European Pharmacopeia for pharmaceutical oral formulations. Then, the behavior of drug-containing microparticles in aqueous media at different pH values was assessed. While they selectively dissolved in gastric-like medium, in tap water (intake conditions), the matrix remained almost unchanged and efficiently prevented drug dissolution. Finally, sensoring taste tests performed by volunteers indicated that systems with indinavir loads approximately 15% displayed acceptable taste. This work explored the production of indinavir-containing microparticles based on a common pharmaceutical excipient as a means for the improvement of medicines of drugs involved in the treatment of HIV/AIDS. For systems containing about 15% drug, taste studies confirmed the acceptability of the formulation. In pediatric regimes, this composition would require an acceptable amount of formulation (0.7-1.5 g).

Specific immunotherapy (SIT) is the only potentially curative treatment for those allergic processes mediated by IgE. We compared the effects of different SITs in mice sensitised with ovalbumin (OVA) Al (OH)(3) : 1) OVA entrapped in particles of poly (D,L-lactic-co-glycolic acid) (PLGA-OVA), 2) Soluble OVA (OVA-sol) and 3) Polymerised OVA (OVA-pol). Serum levels of specific IgE, IgG1, IgG2a and asymmetric IgG, the cutaneous anaphylaxis test (PCA), and the IL-10, IFNgamma and IL-4 levels in culture supernatants of splenocytes challenged with OVA were assessed. Mice treated with PLGA-OVA had higher levels of asymmetric antibodies than non-desensitised mice; a low IgG1 and high IgG2a level was observed together with inhibitory effect in the PCA reaction that reversed in the absence of asymmetric IgG. IL-10 and IFNgamma levels were higher in supernatants from mice treated with PLGA-OVA and OVA-sol than those obtained from non-desensitised controls. Our results suggest that among the different SITs evaluated, PLGA-OVA is the one that best showed an increase in the asymmetric IgG molecules and an effective deviation of the immune response. Furthermore, the increase in the proportion of asymmetric antibodies would be of importance when designing new vaccination strategies for allergy.

Our research group is interested in the study of different technological approaches to treat hospital biofilm as a means to constrain nosocomial-acquired infections. The present work investigated the effect of the incorporation of the antibacterial agent triclosan (TS) into polymeric micelles of poloxamine T1107 (MW=15 kDa, 70 wt% PEO). The aggregation phenomenon was primarily investigated by means of Critical Micellar Concentration in a broad range of pH. Then, the effect of the polymer concentration on the micellar size was evaluated by Dynamic Light Scattering. Solubility levels increased up to 4 orders of magnitude. The drug inclusion affected the micellization, resulting in size increase and micellar fusion. This phenomenon was only apparent in TS-saturated systems. TS-loaded aggregates proved to be active in vitro against a broad spectrum of bacteria but more importantly, also against two representative clinical pathogens: methicilin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecalis (VREF). While the former was sensitive to even very low TS levels attainable in poloxamine-free aqueous media, the later was inhibited only when exposed to higher drug levels affordable exclusively using an inclusion system. These findings indicated the release of the drug from the reservoir. Finally, the activity of a TS-containing 5% poloxamine combination of pH 7.4 was assessed on biofilms of Staphylococcus epidermidis. Results showed a significant decrease (p<0.001) in the number of Colony-Formation Units when the biofilm was exposed to the TS/poloxamine as compared to the limited activity of the polymer-free TS control.

The methods and results obtained by Griffin et al. in the determination of the hydrophilic-lipophilic balance (HLB) values of non-ionic surfactants and of required HLB values of oil mixtures are reviewed in the present work. HLB values published by Griffin were compared with those obtained by calculations from theoretic chemical formulas. Griffin HLB values of polyoxyethylene alkyl ethers, polyoxyethylene monoesters and propylene glycol monoesters coincide with those obtained from such theoretical chemical formulations. These results demonstrate that, for these surfactants, Griffin did not experimentally obtain their HLB values, but instead calculated them from theoretic formulae. For the calculation of the HLB values of glycerol monostearate, sorbitan fatty acid esters and polyoxyethylene sorbitan fatty acid esters, Griffin's assumptions were possibly based upon the mean saponification values of the ester and the acid of the fatty acid. It is concluded that the HLB values of non-ionic surfactants were not rigorously defined. Moreover, Griffin could not demonstrate the validity of the assumption that individual required HLB values can be added up to obtain the overall required HLB value of an oil mixture. The HLB and required HLB values published by Griffin should only be taken as approximate guidelines.

Carbopol gels were prepared using a traditional polymer with mucoadhesive properties (974P). A new Carbomer derivative Ultrez 21 was also evaluated. Mineral oil, as occlusive ingredient, glycerol as humectant and ethanol were included in all the compositions. The feasibility of preparing these formulations with or without a bioadhesive polymer (Polycarbophil AA-1) and a second oil phase with enhancer activity (Miglyol 840) was evaluated. Further characterization including physical stability during a year was carried out. In vitro release behaviour of diclofenac sodium in Franz diffusion cell was evaluated with some selected formulations using an ethanol-water (50% w/w) solution as receptor medium. Addition of Polycarbophil AA-1 increased formulation viscosity and decreased drug release. These types of topical dosage forms could give sustained delivery of drug onto the skin, could tolerate the incorporation of an enhancer, a humectant and an occlusive phase, so they are interesting promises to improve skin absorption of nonsteroidal anti-inflammatory drugs and to prevent side effects associated.

The effectiveness of any cosmetic product containing a functional ingredient is determined by the skin delivery of the active molecule, which is influenced by the type of carrier and the molecule itself. Furthermore, the functional ingredient should be stable in the formulation. The purpose of this paper is to study the stability of lipoic acid in the presence of vitamins A (as palmitate) and E (as acetate) in semisolids for cosmetic use. The systems formulated were studied in regard to their aspect, pH, stability under centrifugation, and rheological behavior. The chemical analyses of lipoic acid and vitamins A and E were carried out by HPLC after studying the specificity of the method employed in each case. The quantitation of the active principles was performed by HPLC with C18 (5 microm) columns. The mobile phase was methanol for the vitamins, with spectrophotometric detection at 325 nm for vitamin A and 230 nm for vitamin E. The mobile phase for lipoic acid was methanol:water (80:20) and phosphoric acid at pH 3.0, with spectrophotometric detection at 332 nm. All systems were stable to centrifugation, and no significant modification of rheological behavior was observed in relation to the base emulsion used as control. The chemical studies performed indicated that although lipoic acid is not very stable in these formulations, the presence of vitamin A favors its chemical stability.

Quaternary microemulsion compositions for oral administration using isopropyl myristate, polysorbate 80 and ethanol 96 degrees were developed and three ratio of polysorbate to ethanol were selected. Isotropic single-phase compositions were considered as microemulsions and were registered on a Pseudo-Ternary Phase Diagram. The objective was to formulate a therapeutic dose for lorazepam and loperamide in a drop liquid form. Another aim was to obtain a liquid oral formula for nifedipine taking advantage of its insured fast absorption to be used in hypertensive crises. The physical stability of the compositions was evaluated by normal aging, centrifugal resistance time and by cycling as well. The selected formulation characterization included density, pH and conductivity measurements. The particle size distribution was determined by a light scattering method and, finally the carried drugs concentration was valued. The versatility showed by this type of systems allows both to carry drugs of different physico-chemical properties and to deal with a number of pharmacotherapeutic objectives.

Five electrokinetic chromatography systems were compared concerning retention behavior and lipophilicity. Comparison was based on capacity (retention) factors of some steroidal drugs, and on log P(OW) values derived by the aid of reference substances. In all systems the aqueous buffer consisted of phosphate (20 mM, pH 7.5). Two systems had micelles, three systems microdroplets as negatively charged pseudostationary phases. The micelles were formed by sodium dodecyl sulfate (SDS) and sodium cholate, respectively. One microemulsion consisted (as usual) from octane as oil, butanol as cosurfactant and SDS as charged tenside. Two microemulsions were made from biosurfactants (phosphatidylcholine, isopropylmyristate) to better simulate biopartitioning of the drugs. Even for noncharged analytes a change in migration sequence and thus in log P(OW) was observed for the systems consisting of the biosurfactants, compared to the others. For the former systems, log P(OW) derived from the capacity factors agree for all analytes with those obtained from calculation by computer software based on the structure of the drugs, and with experimental data directly obtained from octanol/water partitioning.

In this article a detailed revision of the therapeutic applications of the calcium salts of most frequent use, is made. The metabolism, the bioavailability and the clinical use of the different calcium formulations vary significantly according to the salt used. The physiologic order factors, the physicochemical, the technological and the formulation ones influence in the bioavailability and, they alter the therapeutic answer. The salts of most frequent use, carbonate, citrate, pidolate, dobesilate, gluconate, phosphate and lactate, contribute in different quantities of elementary calcium. Recent studies show significant data that can be of importance in the clinical practice. The most habitual uses in the calcium salts are: for the osteoporosis treatment and prevention; in osteopenia; in hypocalcemia states; for low contribution or had absorption; as dietary supplement, according to the recommended daily ingesta and also, in vascular illnesses, like in internal hemorrhoids, phlebopathy and in diabetic retinopathy. It is concluded that it is fundamental to contribute the appropriate quantity of calcium according to the individual requirements and, on that base, to select the appropriate formula keeping in mind the variability that takes place in the absorption in connection with the salt used.

Semen rheology was studied to elucidate the biochemical basis of seminal plasma hyperviscosity. Semen proved to fit in with a power law model, by presenting a pseudoplastic behavior. Apparent viscosity at 230 s(-1) and 25 degrees C (eta(a)) was 4.3 /- 0.2 cp and 5.4 +/- 0.4 cp in normal and high-consistency semen, respectively. The effect of enzymes and mucolytic agents on human seminal plasma viscosity were evaluated by incubating normal and hyperviscous semen pool aliquots with trypsin, dithiothreitol, EDTA, alpha-amylase and deoxyribonuclease I. After incubation, trypsin treatment reduced eta(a) by 36% in normal semen and by 44% in hyperviscous semen. There was a decrease in eta(a) following incubation of hyperviscous samples with dithiothreitol (33%) and alpha-amylase (44%) that was not observed in the normal consistency samples. No decrease was observed in eta(a) after EDTA or DNAse treatment of both groups. Comparison of normal and hyperviscous seminal plasmas revealed no difference in the concentration of total proteins, DNA, or in the percentage of water content. These findings indicate that the primary substances responsible for basic normal semen rheologic behavior are proteins. A comparison of rheological properties between normal and hyperviscous semen samples indicates the existence of a highly organized network in the latter group, in which disulfide bonds and oligosaccharide chains complexed to the peptide core may play a key role.