Search

We have performed scanning tunneling microscopy (STM) and angle-resolved photoemission spectroscopy (ARPES) in Pb-deposited bilayer graphene (BLG) on the SiC(0001) substrate to investigate the dependence of the electronic structures on the Pb-deposition amount. We have observed that the Pb atoms form islands by STM and the π bands of the BLG shift toward the Fermi level by ARPES. This hole-doping-like energy shift is enhanced as the amount of Pb is increased, and we were able to tune the Dirac gap to the Fermi level by 4 ML deposition. Considering the band dispersion, we suggest that the hole-doping-like effect is related to the difference between the work functions of Pb islands and BLG/SiC; the work function of BLG/SiC is lower than that of Pb. Our results propose an easy way of band tuning for graphene with an appropriate selection of both the substrate and deposited material. [ABSTRACT FROM AUTHOR]

Time-resolved soft X-ray photoelectron spectroscopy (PES) experiments were performed with time scales from picoseconds to nanoseconds to trace relaxation of surface photovoltage on the ZnO(0001) single crystal surface in real time. The band diagram of the surface has been obtained numerically using PES data, showing a depletion layer which extends to 1 im. Temporal evolution of the photovoltage effect is well explained by a recombination process of a thermionic model, giving the photoexcited carrier lifetime of about 1 ps at the surface under the flat band condition. This lifetime agrees with a temporal range reported by the previous time-resolved optical experiments. [ABSTRACT FROM AUTHOR]

We have established a fabrication process for conductive carbon nanotube (CNT) tips for multiprobe scanning tunneling microscope (STM) with high yield. This was achieved, first, by attaching a CNT at the apex of a supporting W tip by a dielectrophoresis method, second, by reinforcing the adhesion between the CNT and the W tip by electron beam deposition of hydrocarbon and subsequent heating, and finally by wholly coating it with a thin metal layer by pulsed laser deposition. More than 90% of the CNT tips survived after long-distance transportation in air, indicating the practical durability of the CNT tips. The shape of the CNT tip did not change even after making contact with another metal tip more than 100 times repeatedly, which evidenced its mechanical robustness. We exploited the CNT tips for the electronic transport measurement by a four-terminal method in a multiprobe STM, in which the PtIr-coated CNT portion of the tip exhibited diffusive transport with a low resistivity of 1.8 kΩ/μm. The contact resistance at the junction between the CNT and the supporting W tip was estimated to be less than 0.7 kΩ. We confirmed that the PtIr thin layer remained at the CNT-W junction portion after excess current passed through, although the PtIr layer was peeled off on the CNT to aggregate into particles, which was likely due to electromigration or a thermally activated diffusion process. These results indicate that the CNT tips fabricated by our recipe possess high reliability and reproducibility sufficient for multiprobe STM measurements. [ABSTRACT FROM AUTHOR]

A one-atom-layer compound made of one monolayer of TI and one-third monolayer of Pb on a Si(III) surface having √3 x √3 periodicity was found to exhibit a giant Rashba-type spin splitting of metallic surface-state bands together with two-dimensional superconducting transport properties. Temperature-dependent angle-resolved photoelectron spectroscopy revealed an enhanced electron-phonon coupling for one of the spin-split bands. In situ micro-four-point-probe conductivity measurements with and without magnetic field demonstrated that the (TI, Pb)/Si(III) system transformed into the superconducting state at 2.25 K, followed by the Berezinskii-Kosterlitz-Thouless mechanism. The 2D TI-Pb compound on Si(III) is believed to be the prototypical object for prospective studies of intriguing properties of the superconducting 2D system with lifted spin degeneracy, bearing in mind that its composition, atomic and electron band structures, and spin texture are already well established. [ABSTRACT FROM AUTHOR]

The M-edge resonant magneto-optical Kerr effect of a transition metal film was measured using rotating analyzer ellipsometry and compared with theoretical calculations based on resonant scattering theory. A large Kerr rotation angle of over 10° was observed at room temperature. [ABSTRACT FROM AUTHOR]

We have systematically investigated relaxation of the surface photovoltage effect on the atomically controlled In/Si(111) surfaces with distinctive surface states and different amounts of the surface band bending. The temporal variations were traced in real time by time-resolved photoemission spectroscopy using soft x-ray synchrotron radiation. The relaxation is found to be temporally limited by two steps of the carrier transfer from the bulk to the surface: the tunneling process at a delay time ⩽ 100 ns and the thermionic process on the following time scale (⩾ 100 ns). Crossover of the two mechanisms can be understood by breakdown of the quantum tunneling regime by the increase in width of the space-charge layer during the relaxation. [ABSTRACT FROM AUTHOR]

Time-resolved measurement of photoemission spectroscopy was made to trace a change of surface potential after the surface photovoltage effect on a Si(111) 7×7 surface. Two relaxation processes were found with decay times of nanoseconds and hundreds of nanoseconds, which are explained in terms of the tunneling and the thermionic relaxation schemes, respectively. At the high laser power density, the relaxation has become oscillatory with a temporal period of several tens of nanoseconds. [ABSTRACT FROM AUTHOR]

Stacking engineering in van der Waals (vdW) materials is a powerful method to control topological electronic phases for quantum device applications. Atomic intercalation into the vdW material can modulate the stacking structure at the atomic scale without a highly technical protocol. Here we report that lithium intercalation in a topologically structured graphene/buffer system on SiC(0001) drives dynamic topological domain wall (TDW) motions associated with stacking order change by using an in situ aberration-corrected low-energy electron microscope in combination with theoretical modelling. We observe sequential and selective lithium intercalation that starts at topological crossing points (AA stacking) and then selectively extends to AB stacking domains. Lithium intercalation locally changes the domain stacking order to AA and in turn alters the neighbouring TDW stacking orders, and continuous intercalation drives the evolution of the whole topological structure network. Our work reveals moving TDWs protected by the topology of stacking and lays the foundation for controlling the stacking structure via atomic intercalation. These findings open up new avenues to realize intercalation-driven vdW electronic devices., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

Ca-intercalation has enabled superconductivity in graphene on SiC. However, the atomic and electronic structures that are critical for superconductivity are still under discussion. We find an essential role of the interface between monolayer graphene and the SiC substrate for superconductivity. In the Ca-intercalation process, at the interface a carbon layer terminating SiC changes to graphene by Ca-termination of SiC (monolayer graphene becomes a bilayer), inducing more electrons than a free-standing model. Then, Ca is intercalated in between the graphene layers, which shows superconductivity with the updated critical temperature ( T C ) of up to 5.7 K. In addition, the relation between T C and the normal-state conductivity is unusual, "dome-shaped". These findings are beyond the simple C 6 CaC 6 model in which s-wave BCS superconductivity is theoretically predicted. This work proposes a general picture of the intercalation-induced superconductivity in graphene on SiC and indicates the potential for superconductivity induced by other intercalants.

Photocatalytic activity is determined by the transport property of photoexcited carriers from the interior to the surface of photocatalysts. Because the carrier dynamics is influenced by a space charge layer (SCL) in the subsurface region, an understanding of the effect of the potential barrier of the SCL on the carrier behavior is essential. Here we have investigated the relaxation time of the photoexcited carriers on single-crystal anatase and rutile TiO2 surfaces by time-resolved photoelectron spectroscopy and found that carrier recombination, taking a nanosecond time scale at room temperature, is strongly influenced by the barrier height of the SCL. Under the flat-band condition, which is realized in nanometer-sized photocatalysts, the carriers have a longer lifetime on the anatase surface than the rutile one, naturally explaining the higher photocatalytic activity for anatase than rutile.

We have succeeded in detecting metallic transport in a monatomic layer of In on an Si(111) surface, Si(111)-sqrt[7]×sqrt[3]-In surface reconstruction, using the micro-four-point probe method. The In layer exhibited conductivity higher than the minimum metallic conductivity (the Ioffe-Regel criterion) and kept the metallic temperature dependence of resistivity down to 10 K. This is the first example of a monatomic layer, with the exception of graphene, showing metallic transport without carrier localization at cryogenic temperatures. By introducing defects on this surface, a metal-insulator transition occurred due to Anderson localization, showing hopping conduction.

Temperature-dependent electron transport in a metallic surface superstructure, Si(111)sqrt[3] x sqrt[3]-Ag, was studied by a micro-four-point probe method and photoemission spectroscopy. The surface-state conductivity exhibits a sharp transition from metallic conduction to strong localization at approximately 150 K. The metallic regime is due to electron-phonon interaction while the localization seemingly originates from coherency of electron waves. Random potential variations, caused by Friedel oscillations of surface electrons around defects, likely induce strong carrier localization.

The authors have developed an ultrahigh vacuum (UHV) variable-temperature four-tip scanning tunneling microscope (STM), operating from room temperature down to 7 K, combined with a scanning electron microscope (SEM). Four STM tips are mechanically and electrically independent and capable of positioning in arbitrary configurations in nanometer precision. An integrated controller system for both of the multitip STM and SEM with a single computer has also been developed, which enables the four tips to operate either for STM imaging independently and for four-point probe (4PP) conductivity measurements cooperatively. Atomic-resolution STM images of graphite were obtained simultaneously by the four tips. Conductivity measurements by 4PP method were also performed at various temperatures with the four tips in square arrangement with direct contact to the sample surface.

We performed four-terminal conductivity measurements on a CoSi2 nanowire (NW) at room temperature by using PtIr-coated carbon nanotube (CNT) tips in a four-tip scanning tunneling microscope. The physical stability and high aspect ratio of the CNT tips made it possible to reduce the probe spacing down to ca. 30 nm. The probe-spacing dependence of resistance showed diffusive transport even at 30 nm and no current leakage to the Si substrate.

Using angle-resolved photoemission spectroscopy, we investigate changes in the band dispersion of a free-electron-like surface state of [FORMULA: SEE TEXT], induced by adsorption of submonolayer Au adatoms. At room temperature, where the adatoms are in a two-dimensional adatom-gas phase, electrons are transferred from the Au adatoms to the substrate, shifting the surface band downwards and causing it to deviate from a parabolic dispersion. At 135 K where the Au adatoms are frozen at specific sites of the substrate, the band splits into two. This band splitting can be explained in terms of hybridization between the unperturbed surface band and the localized virtual bound states induced by the Au adatoms.

We have succeeded in measuring the resistance across a single atomic step through a monatomic-layer metal on a crystal surface, Si(111)(sqrt[3]xsqrt[3])-Ag, using three independent methods, which yielded consistent values of the resistance. Two of the methods were direct measurements with monolithic microscopic four-point probes and four-tip scanning tunneling microscope probes. The third method was the analysis of electron standing waves near step edges, combined with the Landauer formula for 2D conductors. The conductivity across a monatomic step was determined to be about 5 x 10(3) Omega(-1) m(-1). Electron transport across an atomic step is modeled as a tunneling process through an energy-barrier height approximately equal to the work function.

We have devised a "square micro-four-point probe method" using an independently driven ultrahigh-vacuum four-tip scanning tunneling microscope, and succeeded for the first time to directly measure anisotropic electrical conductance of a single-atomic layer on a solid surface. A quasi-one-dimensional metal of a single-domain Si(111)4 x 1-In had a surface-state conductance along the metallic atom chains (sigma(axially)) to be 7.2(+/-0.6) x 10(-4) S/square at room temperature, which was larger than that in the perpendicular direction (sigma(radially)) by approximately 60 times. The sigma(axially) was consistently interpreted by a Boltzmann equation with the anisotropic surface-state band dispersion, while the sigma(radially) was dominated by a surface-space-charge-layer conductance.

Background: Several studies have reported that the chimeric monoclonal antibody to tumor necrosis factor (TNF)-alpha (Infliximab) is extremely valuable in the treatment of Crohn's disease. The aim of this study was to clarify the efficacy of this treatment in Japanese patients with Crohn's disease., Methods: A 12-week multicenter, open trial of Infliximab was carried out and involved 25 patients with moderate to severe Crohn's disease who were resistant to conventional treatment. Patients received a single 2-h intravenous infusion of Infliximab at a dose of 1, 3, 5 or 10 mg/kg bodyweight. Clinical evaluation of this treatment response was defined as a reduction in the index of the inflammatory bowel disease (IOIBD) and of the Crohn's disease activity index scores (CDAI), and in serum levels of C-reactive protein (CRP) at 2, 4, 8 and 12 weeks, and as an increase in serum levels of rapid turnover proteins as well as improvement of radiologic and endoscopic findings at 4 weeks., Results: The IOIBD score was reduced after 4 weeks in 66.7% of the group receiving 1 mg/kg Infliximab, 71.4% in the group receiving 3 mg/kg, 80.0% in the group receiving 5 mg/kg, and 85.7% in the group receiving 10 mg/kg. Improvement was better maintained over 12 weeks in the 5 and 10 mg/kg groups compared with the 1 and 3 mg/kg groups. Similar results were obtained for the CDAI scores. Serum levels of rapid turnover proteins significantly increased to within the normal ranges after infusion in all groups. Seven of the 11 (63.6%) patients evaluated showed improvement of radiologic and endoscopic findings., Conclusions: A single infusion of Infliximab was effective for the treatment of Japanese patients with Crohn's disease. Serum rapid turnover proteins reflected the clinical response to antibody for TNF-alpha well.

A thiamine (T) deficient state in rats was produced by feeding the rats a T deficient diet (TDD). At the stage of 13 days (TDD13 group), the number of red blood cells (RBC) and white blood cells (WBC), hematocrit (Ht) and hemoglobin (Hb) values decreased. On the other hand, after 30 days on the TDD (TDD30 group), the number of RBC was 819 x 10(4)/mm3 as against 631 x 10(4)/mm3 in the normal control group (NC group). Ht and Hb values also increased in the TDD30 group. These changes observed in the TDD30 group were significantly different from findings in the equal weight control group (EWC group) or in the pair fed control group (PFC group). The number of reticulocytes increased, the levels of 2,3-diphosphoglycerate (2,3-DPG) of RBC decreased and plasma erythropoietin levels increased in the TDD30 group. T levels of blood in the TDD13 group were 62 (39-79) ng/ml as against 275 (196-412) ng/ml in the NC group. T levels of blood in the TDD30 group were 102 (17-365) ng/ml, and widely varied. Decrease in 2,3-DPG produces an increase in O2 affinity to Hb, and hypoxia is induced in the peripheral tissues. Furthermore these conditions stimulate erythropoietin production and finally the number of RBC increases. T deficiency produces anemia at an early stage and absolute erythrocytosis occurs at the late stage of T deficiency. The increased osmotic resistance of RBC in hypotonic solution was also observed in the TDD30 group. This increase in osmotic resistance correlated with the decrease in cholesterol and phospholipid levels in the membrane of RBC.

The effects of thiamine (T) on diabetes mellitus (DM) and the T levels in the brain, heart, liver, kidneys pancreas, muscle, adipose tissue and blood were measured. For the experimental DM model, alloxan (170 mg/kg, i.v.) was injected into male ddY mice and insulin was also administered for 5 days to prevent death by hyperglycemia (DM group). After 14 days, blood glucose level increased to 455 mg/dl, compared to 166 mg/dl in the normal control group (NC group). In the DM mice, the T level in the liver decreased to 7.71 micrograms/g, compared to 16.29 micrograms/g in the NC group. The T levels in the heart, pancreas, muscle and adipose tissue increased to 18.63 micrograms/g, 3.99 micrograms/g, 2.53 micrograms/g and 5.07 micrograms/g in the DM group, compared to 14.99 micrograms/g, 3.27 micrograms/g, 1.98 micrograms/g and 4.04 micrograms/g in the NC group, respectively. The T levels in the brain and kidney were 2.38 micrograms/g and 14.00 micrograms/g in the DM group, compared to 2.34 micrograms/g and 13.72 micrograms/g in the NC group, respectively. But, in the heart, an active form of a T co-enzyme decreased to 27%, compared to 95% for the NC group. These results indicate a T deficiency or an endogenous T deficiency in the DM group. All DM mice without insulin treatment died within 7 days but about 40% of the mice survived up to 14 days with the administration of T.