Search

Purpose: To compare the accuracy of patient‐specific guides (PSCG) to the standard technique in medial open‐wedge high tibial osteotomy (OWHTO). Secondary objectives were to evaluate factors that could influence accuracy and to compare the complication rate and operating time for both procedures. Methods: A retrospective analysis of prospective collected data was performed. Between March 2011 and May 2018, 49 patients with isolated medial knee osteoarthritis who were operated for OWHTO using PSCG and 38 patients using the standard technique were included. Preoperative and postoperative deformities were evaluated on long leg radiographs by measuring the mechanical medial proximal tibial angle, mechanical lateral distal femoral angle, hip knee ankle angle (HKA), and joint line convergence angle. Pre‐ and postoperative posterior tibial slope was also evaluated. Accuracy was evaluated by analysing the difference between the preoperative planned and the actual postoperative HKA. Operating time and complication rate were also recorded in both groups. Results: The mean preoperative HKA was 173.4° (±3.1°) in the PSCG group and 173.3° (±2.4°) in the standard group (p = 0.8416). Mean planned HKA were 182.8° (±1.1°) and 184.0° (±0°) respectively for the PSCG and the standard group. Mean postoperative HKA were 181.9° (±1.9°) and 182.6° (±3.1°) respectively for the PSCG and the standard group. An accuracy of ±2° in the HKA was achieved in 44 (90%) in the PSCG group and 24 (65%) in the standard group (p = 0.006). The probability of achieving a HKA accuracy was four times higher for patients in the PSCG group (odds ratio [OR] = 4.06, [1.1; 15.3], p = 0.038). Also, higher preoperative Ahlback grade was associated with precision, all other parameters being equal (OR = 4.2, [0.13; 0.97], p = 0.04). Conclusion: In this study, the PSCG technique was significantly more accurate for achieving the planned HKA in OWHTO. Complication rates and operating times were comparable between groups. Level of Evidence: Level IV, case‐control study. [ABSTRACT FROM AUTHOR]

Abstract Purpose To compare the accuracy of patient‐specific guides (PSCG) to the standard technique in medial open‐wedge high tibial osteotomy (OWHTO). Secondary objectives were to evaluate factors that could influence accuracy and to compare the complication rate and operating time for both procedures. Methods A retrospective analysis of prospective collected data was performed. Between March 2011 and May 2018, 49 patients with isolated medial knee osteoarthritis who were operated for OWHTO using PSCG and 38 patients using the standard technique were included. Preoperative and postoperative deformities were evaluated on long leg radiographs by measuring the mechanical medial proximal tibial angle, mechanical lateral distal femoral angle, hip knee ankle angle (HKA), and joint line convergence angle. Pre‐ and postoperative posterior tibial slope was also evaluated. Accuracy was evaluated by analysing the difference between the preoperative planned and the actual postoperative HKA. Operating time and complication rate were also recorded in both groups. Results The mean preoperative HKA was 173.4° (±3.1°) in the PSCG group and 173.3° (±2.4°) in the standard group (p = 0.8416). Mean planned HKA were 182.8° (±1.1°) and 184.0° (±0°) respectively for the PSCG and the standard group. Mean postoperative HKA were 181.9° (±1.9°) and 182.6° (±3.1°) respectively for the PSCG and the standard group. An accuracy of ±2° in the HKA was achieved in 44 (90%) in the PSCG group and 24 (65%) in the standard group (p = 0.006). The probability of achieving a HKA accuracy was four times higher for patients in the PSCG group (odds ratio [OR] = 4.06, [1.1; 15.3], p = 0.038). Also, higher preoperative Ahlback grade was associated with precision, all other parameters being equal (OR = 4.2, [0.13; 0.97], p = 0.04). Conclusion In this study, the PSCG technique was significantly more accurate for achieving the planned HKA in OWHTO. Complication rates and operating times were comparable between groups. Level of Evidence Level IV, case‐control study.

Abstract Background Total knee arthroplasty (TKA) is most frequently planned using conventional two-dimensional weight-bearing lower limb radiographs and is performed with conventional femoral and tibial cutting guides. Questions have been raised about the accuracy of conventional TKA instrumentation and planning for an anatomically standard or complex joint. Use of computed tomography (CT)-based three-dimensional (3D) templating and patient-specific cutting guides printed in 3D has shown improved postoperative lower limb alignment parameters. This case-control study compared costs and operative times of using CT-based, patient-specific, single-use instruments versus conventional metal instruments for TKA. Methods In this case-control, retrospective chart review, all TKAs were performed by one senior surgeon, using the F.I.R.S.T. posterior-stabilised knee prosthesis (Symbios, CH), with a similar protocol and identical operating room setup. Group A included 51 TKAs performed with patient-specific cutting guides and conventional metal instruments. Group B included 49 TKAs performed with patient-specific cutting guides and patient-specific, single-use instrumentation. Operation duration, number of instrumentation trays and sterilisation costs were evaluated. Results The groups were similar for age, body mass index, hip-knee-ankle angle and operation duration. The mean number of instrumentation trays was 8.0 ± 0.8 for group A (controls) and 5.1 ± 0.9 for group B (p

Purpose: Double level osteotomy (DLO) (femoral and tibial) is a technically demanding procedure for which pre-operative planning accuracy and intraoperative correction are key factors. The aim of this study was to assess the accuracy of the achieved correction using patient-specific cutting guides (PSCGs) compared to the planned correction, its ability to maintain joint line obliquity (JLO), and to evaluate clinical outcomes and level of patient satisfaction at a follow-up of two years. Methods: A single-centre, prospective observational study including 22 patients who underwent DLO by PSCGs between 2014 and 2018 was performed. Post-operative alignment was evaluated and compared with the target angular values to define the accuracy of the correction for the hip-knee-ankle angle (ΔHKA), medial proximal tibial angle (ΔMPTA), lateral distal femoral angle (ΔLDFA), and posterior proximal tibial angle (ΔPPTA). Pre- and post-operative JLO was also evaluated. At two year follow-up, changes in the KOOS sub-scores and patient satisfaction were recorded. The Mann–Whitney U test with 95% confidence interval (95% CI) was used to evaluate the differences between two variables; the paired Student's t test was used to estimate evolution of functional outcomes. Results: The mean ΔHKA was 1.3 ± 0.5°; the mean ΔMPTA was 0.98 ± 0.3°; the mean ΔLDFA was 0.94 ± 0.2°; ΔPPTA was 0.45 ± 0.4°. The orientation of the joint line was preserved with a mean difference in the JLO of 0.4 ± 0.2. At last follow-up, it was recorded a significant improvement in all KOOS scores, and 19 patients were enthusiastic, two satisfied, and one moderately satisfied. Conclusion: Performing a DLO using PSCGs produces an accurate correction, without modification of the joint line orientation and with good functional outcomes at two year follow-up [ABSTRACT FROM AUTHOR]

Background: Total knee arthroplasty (TKA) is most frequently planned using conventional two-dimensional weight-bearing lower limb radiographs and is performed with conventional femoral and tibial cutting guides. Questions have been raised about the accuracy of conventional TKA instrumentation and planning for an anatomically standard or complex joint. Use of computed tomography (CT)-based three-dimensional (3D) templating and patient-specific cutting guides printed in 3D has shown improved postoperative lower limb alignment parameters. This case-control study compared costs and operative times of using CT-based, patient-specific, single-use instruments versus conventional metal instruments for TKA. Methods: In this case-control, retrospective chart review, all TKAs were performed by one senior surgeon, using the F.I.R.S.T. posterior-stabilised knee prosthesis (Symbios, CH), with a similar protocol and identical operating room setup. Group A included 51 TKAs performed with patient-specific cutting guides and conventional metal instruments. Group B included 49 TKAs performed with patient-specific cutting guides and patient-specific, single-use instrumentation. Operation duration, number of instrumentation trays and sterilisation costs were evaluated. Results: The groups were similar for age, body mass index, hip-knee-ankle angle and operation duration. The mean number of instrumentation trays was 8.0 ± 0.8 for group A (controls) and 5.1 ± 0.9 for group B (p<0.001). The mean sterilisation costs were 380 ± 47 Swiss Francs (CHF) for group A and 243 ± 55 CHF for group B (p<0.001), for a mean cost reduction of 130.50 CHF per intervention in group B. The time interval between two consecutive surgeries was 24 min for group A and 18 min for group B. There were no adverse events or complications, instrument-related or otherwise. Conclusion: Compared to conventional instrumentation, use of patient-specific, single-use instruments for TKA reduced the number of instrumentation trays by more than one-third and saved 36% in sterilisation costs. If fabrication costs of single-use instruments are included by the company, the total cost is significantly diminished. There was no operative time advantage for single-use instrumentation. [ABSTRACT FROM AUTHOR]

Purpose: Patient-specific cutting guides are increasingly used in the field of osteotomies around the knee and can improve the accuracy of planned correction and more specifically in the case of double-level osteotomy (DLO). The purpose of this study was to analyse the accuracy of postoperative coronal alignment after DLO using patient-specific cutting guides techniques (PSI) compared to conventional techniques. The secondary objective was to compare the functional results between the two groups at short-term follow-up., Hypothesis: The accuracy of global correction (HKA angle) is better with patient-specific cutting guides compared to conventional techniques for double-level osteotomy METHODS: This multicentric comparative retrospective study included 53 patients (mean age: 53.8 ± 5.2 years, male/female: 44/9) who underwent a DLO for knee varus malalignment. The coronal correction accuracy (as expressed by the difference between postoperative angular values and preoperative targeted correction) was compared between techniques using patient-specific cutting guides (PSI group, n = 27) or conventional techniques (n = 26) for the medial proximal tibial angle (MPTA) and the lateral distal femoral angle (LDFA). Postoperatively, the global alignment expressed by the hip-knee-ankle angle and the joint line obliquity were compared between groups. The postoperative functional results for KOOS and UCLA activity scale score were also compared at a mean follow-up of 1.7 years (1.0-3.1 years)., Results: No difference was observed for the postoperative global alignment between the PSI and the conventional groups (Δ = 0.6 °, p = 0.11) neither for the postoperative posterior proximal tibial angle (Δ = 1.6°, p = 0,99) or the joint line obliquity (Δ = 0.3°, p = 0,17). In the coronal plane, the postoperative MPTA was lower in the PSI group (Δ = 2.3°, p < 0.001) as well as the postoperative LDFA (Δ = 0.9°, p = 0.01). Concerning correction accuracy in the coronal plane, the results showed a significant higher accuracy of the planned correction in the PSI group compared to the conventional group for MPTA (2.2 ± 0.2 versus 0.8 ± 0.7, Δ = 1.5 °, p < 0.001) and LDFA (1.3 ± 1.0 versus 0.6 ± 0.9, Δ = 0.7°, p < 0.001). No improvement difference was observed between the conventional group and the PSI group respectively for the KOOS symptoms (p = 0.12), the KOOS Pain (p = 0,57), the KOOS activities of daily living (p = 0.61), the KOOS sport/rec (p = 0.65), or for the KOOS Quality of Life (p = 0.99) neither for the UCLA (p = 0.97)., Conclusions: This study suggests that the use of custom-made cutting guides improves the accuracy of planned correction in double-level osteotomy compared with conventional techniques, which may have implications particularly in centers not performing a large volume of osteotomies. This improved accuracy is not associated with any difference in joint line obliquity or functional results but these results need to be confirmed by a randomized prospective study., Level of Evidence: III; Retrospective comparative study., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Background: Rotational malalignment deformities of the lower limb in adults mostly arise from excessive femoral anteversion and/or excessive external tibial torsion. The aim of this study was to assess the correction accuracy of a patient specific cutting guides (PSCG) used in tibial and femoral correction for lower-limb torsional deformities., Methods: Forty knees (32 patients) were included prospectively. All patients had patellofemoral pain or instability with torsional malalignment for which a proximal tibial (HTO) or distal femoral (DFO) or a double-level osteotomy (DLO) had been performed. Accuracy of the correction between the planned and the postoperative angular values including femoral anteversion, tibial torsion, coronal and sagittal alignment were assessed after tibial and/or femoral osteotomy., Results: Forty knees were included in this study. In cases of HTO, the correction accuracy obtained with PSCG was 1.3 ± 1.1° for tibial torsion (axial plane), 0.8 ± 0.7° for MPTA (coronal plane) and 0.8 ± 0.6° for PPTA (sagittal plane). In cases of DFO, the correction accuracy obtained with PSCG was 1.5 ± 1.4° for femoral anteversion (axial plane), 0.9 ± 0.9° for LDFA (coronal plane) and 0.9 ± 0.9° for PDFA (sagittal plane). The IKSG was improved from 58.0 ± 13.2° to 71.4 ± 10.9 (p = 0.04) and the IKSF from 50.2 ± 14.3 to 87.0 ± 6.9 (p < 0.001)., Conclusions: Using the PSCG for derotational osteotomy allows excellent correction accuracy in all the three planes for femoral and tibial torsional deformities associated with patellofemoral instability. Level of clinical evidence II, prospective cohort study., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: GM, BC, JNA, RK, CJ and PM have nothing to disclose. MO is educational consultant for Newclip., (Copyright © 2022 Elsevier B.V. All rights reserved.)