Search

Coastal erosion, a worldwide social issue, has garnered substantial attention. Numerous methods have been implemented to control coastal erosion problems; however, the presence of rigid structures limits erosion mitigation, thereby causing various challenges. For instance, in the case of submerged breakwaters, local scour in front of the structure and scour caused by the flow occurring in open inlets affect the subsidence and stability of the structure and can also cause structural failure. To solve these problems, this paper proposes a hybrid method of using a submerged breakwater with an artificial coral reef installation; further, this study evaluates the attenuation of waves and mitigation of sediment transportation through large-scale 3D hydraulic experiments. We found that the hybrid method with an artificial coral reef installed in the open inlet shows excellent wave control and plays a clearly beneficial role in the advancement of the shoreline. The artificial coral reef method reduced the return flow generated by the drag force at the breakwater shoulder and open inlet. In addition, scour at the breakwater shoulder was inhibited by collecting the sand escaping offshore. Simultaneously, scour at the open inlet was also mitigated. The application of the hybrid method compensated for the problems caused by local scour and erosion in the submerged breakwater, thereby leading to the improvement of its function. Therefore, the hybrid method proposed in this paper was determined to be applicable not only for submerged breakwaters, but also for various structures for controlling coastal erosion.

Non-point source (NPS) pollution is one of the primary sources of contamination in aquatic systems, such as rivers and lakes. Various techniques and devices, including low impact development (LID) and best management practice (BMP) devices, can reduce NPS pollution. These devices are installed with pretreatment units to remove NPS pollutants more efficiently and to facilitate maintenance. In this study, suspended solids (SS) and particle size distributions (PSD) were investigated in a pilot-scale facility to determine the effect of various pretreatment unit types and inflows on SS removal. We found that the efficiency of SS concentration and particulate matter removal changed significantly (p < 0.05) based on the aspect ratio of the pretreatment unit. Three flow conditions were also tested (10, 15, and 20 m3/h); SS removal was most efficient at 15 m3/h. These findings can be applied to the design of NPS management facilities, which is expected to help increase the efficiency of new NPS facilities while reducing operating costs.

Performance evaluation of nonpoint source pollution management facilities prior to installation on site can provide consumers with guidelines on the ability of pollution removal and maintenance cost of facilities. Various test methods for demonstrating the performance of nonpoint source pollution management facilities exist, but in the case of standard test water for indoor testing, it is necessary to develop a test water manufacturing method that takes into account the characteristics of the stormwater runoff. In this study, we investigated and analyzed the particulate matter of the stormwater runoff flowing into the nonpoint source pollution management facility. Differences according to land use characteristics were analyzed for particle size, specific gravity, and organic matter content. Based on these findings, standards for manufacturing simulated stormwater were presented. The results showed that it is reasonable to simulate the particle size within a maximum of 190 µm, and specific gravity and organic matter content differed depending on the characteristics of land use. Although the results of this study were applied in Korea, this method can be applied in a variety of countries because it presents a method for selecting the criteria for soils required for manufacturing stormwater when evaluating nonpoint source pollution management facilities. [ABSTRACT FROM AUTHOR]

The increase in impervious areas caused by urbanization causes the amount of surface rainfall-runoff and nonpoint source (NPS) pollutant discharge to also increase. This issue has sparked a growing interest in low impact development (LID) technology and NPS reduction technology. The objective of this study is to analyze the ability of a hybrid system to achieve both rainfall-runoff and NPS pollutant reduction simultaneously. The results indicate that this system is effective in reducing particulate matter with a relatively small particle size (less than 64 µm), which plays an important role in reducing NPS pollution. It is expected that a LID-based urban water cycle recovery policy could be established through further research on various hybrid system configuration methods and socioeconomic effect analysis. [ABSTRACT FROM AUTHOR]

This paper describes the effects of weir construction on water quality in the Yeongsan (YS) River. In general, weirs affect aquatic environments of rivers and streams by interrupting natural water flow. To identify changes in water quality before and after weir construction, analysis of variance and autocorrelation tests were conducted on data from four monitoring stations. Seasonal variations in suspended solids (SS), biochemical oxygen demand (BOD5), chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP), and pH were analyzed using data from six years of monitoring. No significant changes in mean BOD5 or COD followed the construction of weirs. However, mean TN and TP were changed significantly during and after construction. Moreover, SS and pH changed significantly during construction, and TN and TP concentrations were slightly improved after weir construction. However, continuous monitoring and analysis of water quality changes in each weir are required to prevent environmental disasters such as algal blooms. [ABSTRACT FROM AUTHOR]

To manage and control the nonpoint source (NPS) pollution and to improve the water quality of impaired streams, rivers and lakes, practices including constructed wetlands, permeable pavement, swales and others are being attempted in the world. Before applying these techniques, an analysis of stormwater runoff characteristics should be understood due to the complexity in estimating system design factors for best management practices (BMPs). This study investigates the stormwater discharge from an agricultural area in Korea. Based on this investigation, pollutant and fl ow coeffi cient of variation (PFCoV) values were developed in an attempt to explain the stormwater runoff in the agricultural area. Four fi eld studies categorized by rainfall type were then employed to assess the PFCoV values. The results show that the physical meaning of PFCoV values indicates the variation of NPS pollutants during a storm event. As such, this simple and meaningful result can be applied to a wide range of stormwater management designs or water quality controls in agricultural areas. [ABSTRACT FROM AUTHOR]

As a representative urban stream in Korea, the Gwangju (GJ) stream suffers from chronic fecal contamination. In this study, to characterize levels of fecal pollution in the GJ stream, the monthly monitoring data for seven years (from 2001 to 2007) and the hourly monitoring data from two field experiments were examined with respect to seasonal/daily variations and spatial distribution under wet and dry weather conditions. This research revealed that concentrations of fecal indicator bacteria strongly varied depending on the prevalent meteorological conditions. That is, during the dry daytime, fecal indicator bacteria concentrations decreased due to inactivation from solar irradiation, but rapidly increased in the absence of sunlight, suggesting external source inputs. In addition, bacterial concentrations substantially increased during rainfall events, due probably to a major contribution from combined sewer overflow. The observations in this study can be useful for implementing fecal pollution management strategies and for predicting fecal contamination as a function of meteorological conditions. [ABSTRACT FROM AUTHOR]

Water quality response in a reservoir has often been assessed using relatively restricted datasets that cannot provide sufficient information, thereby giving rise to a dramatic over- or underestimate of actual figures. In this paper we discuss how the levels of metallic elements between the sediment and overlying water in an estuarine reservoir can be influenced by aquatic parameters in response to spatial and seasonal conditions. To better elucidate the interfacial exchange between sediment and water, statistical analyses are employed to intensive data sets collected from the Yeongsan Reservoir (YSR), Korea, which has undergone widespread deterioration in water quality due to the continuous growth of anthropogenic sources. During three seasonal sampling campaigns, we found that oxygen deficiency at the bottom water layer promotes Fe and Ni accumulation in sediment, likely due to the formation of sulfide and oxide complexes under anoxic and suboxic environments, respectively. In addition, salinity levels as high as 11‰ in the bottom water layer during autumn substantially increase the release of Mn, restricting the use of YSR as a primary source of agricultural irrigation water. Although most dissolved metals are at acceptable levels for sustaining aquatic life, it is recommended that for long-term planning the elevated Fe and Mn levels in sediment should be controlled with oxygen deficiency during dry weather to ensure a sustainable water supply or, at a minimum, better coordinated operation of YSR. [ABSTRACT FROM AUTHOR]

This paper describes a management scheme to control river water quality using additional water discharges from upstream dams, which results in an increase environmental flow (EF) followed by an enhancement of water quality in a target river. To suggest a creditable management plan among a suite of ideal scenarios, the monthly averaged water quality monitoring data from 2001 to 2006 at the Yeongsan (YS) River, Korea were investigated with respect to seasonal variation and spatial distribution. From the analysis, it was found that while biochemical oxygen demand (BOD5) level in the YS River was extremely high during the dry/drought season (April, May, and June; AMJ), the level was subsequently decreased during the monsoon season (July, August, and September; JAS) due mainly to the dilution effect of rainfall. To improve the water quality in AMJ, we here suggested a scenario of increasing EF using surplus water discharges from upstream dams, which was examined by one dimensional riverine water quality model, QUAL2E model. Simulation result showed that additional discharge from the upstream dams could lead, on average, to a 36% of water quality improvement in mainstream with respect to BOD5. Model coefficients were validated by comparing the six year monitoring data to minimize a sum of squares error, and showed a good agreement with the observed data. Overall, the methodology developed in this paper appears to be quite clear and straightforward, and thus, can be applied to a wide range of the flow managements or water quality controls in a stream with artificial structures. [ABSTRACT FROM AUTHOR]

Greater efforts to provide alternative scenarios are key to successful urban stream restoration planning. In this study, we discuss two different aspects of water quality management schemes, biodegradation and human health, which are incorporated in the restoration project of original, pristine condition of urban stream at the Gwangju (GJ) Stream, Korea. For this study, monthly monitoring of biochemical oxygen demand (BOD5) and fecal indicator bacteria (FIB) data were obtained from 2003 to 2008 and for 2008, respectively, and these were evaluated to explore pollutant magnitude and variation with respect to space and time window. Ideal scenarios to reduce target pollutants were determined based on their seasonal characteristics and correlations between the concentrations at a water intake and discharge point, where we suggested an increase of environmental flow and wetland as pollutants reduction drawing for BOD5 and FIB, respectively. The scenarios were separately examined by the Qual2E model and hypothetically (but planned) constructed wetland, respectively. The results revealed that while controlling of the water quality at the intake point guaranteed the lower pollution level of BOD5 in the GJ Stream, a wetland constructed at the discharge point may be a promising strategy to mitigate mass loads of FIB. Overall, this study suggests that a combination of the two can be plausible scenarios not only to support sustainable urban water resources management, but to enhance a quality of urban stream restoration assignment. [ABSTRACT FROM AUTHOR]

The present study proposes a methodology for determining the effective dispersion coefficient based on the field measurements performed in Gwangju (GJ) Creek in South Korea which is environmentally degraded by the artificial interferences such as weirs and culverts. Many previous works determining the dispersion coefficient were limited in application due to the complexity and artificial interferences in natural stream. Therefore, the sequential combination of N-Tank-In-Series (NTIS) model and Advection-Dispersion-Reaction (ADR) model was proposed for evaluating dispersion process in complex stream channel in this study. The series of water quality data were intensively monitored in the field to determine the effective dispersion coefficient of E. coli in rainy day. As a result, the suggested methodology reasonably estimates the dispersion coefficient for GJ Creek with 1.25m2/s. Also, the sequential combined method provided Number of tank-Velocity-Dispersion coefficient (NVD) curves for convenient evaluation of dispersion coefficient of other rivers or streams. Comparing the previous studies, the present methodology is quite general and simple for determining the effective dispersion coefficients which are applicable for other rivers and streams. [ABSTRACT FROM AUTHOR]

Nonpoint source (NPS) pollution is widely recognized as a major source affecting the water quality deterioration in rivers, lakes, and marine environments. Many studies about the relations between NPS pollutants and solid matters from drainage area have been carried out in the area of stormwater management. This study collected stormwater and soil samples from a drainage area in Korea; the particle size distributions (PSDs) were then analyzed during four storm events. The results indicate that the PSDs of fine and medium silt in the stormwater are related to the soil component of the drainage area. In addition, solid matter was strongly related to NPS pollutant discharges such as total nitrogen and total phosphorus during stormwater runoff. Therefore, to design an NPS management facility, the PSD from the drainage area should be considered. It is expected that this study can be applied to the designs of settling ponds used to remove particles from stormwater runoff. [ABSTRACT FROM AUTHOR]

Advanced total phosphorus (TP) removal is required to regulate the TP concentrations to less than 0.2 mg/L, as specified by the South Korean policies for the prevention of aquatic eutrophication. In order to meet the standards from 2012, the treatment efficiency of conventional treatment plants should be improved. This study addresses this need by developing a novel TP removal methodology that uses a static mixer for coagulation and a redesigned sedimentation tank incorporated with a guiding baffle. Experiments were carried out during summer, autumn, and winter. Results show that: (1) the phosphorus removal efficiency was relatively higher in summer than in autumn and winter, (2) the inline static mixer increased the efficiency of soluble phosphorus removal to above 95%, and (3) optimal angle determination for the guiding baffle was essential to achieve a stable hydraulic behavior and a low shear rate at the bottom of the sedimentation tank and thus to improve the sedimentation rate. In addition, the application of combined sewer overflows sludge led to stable and high phosphorus removal efficiency (> 90%). These results indicate that the newly designed TP removal plant could serve as a prototype for an advanced treatment of phosphorus in wastewaters. [ABSTRACT FROM AUTHOR]