Search

This paper studies a location-allocation problem to determine the selection of emergency shelters, medical centers, and distribution centers after the disaster. The evacuation of refugees and allocation of relief resources are also considered. A mixed-integer nonlinear multiobjective programming model is proposed to characterize the problem. The hierarchical demand of different refugees and the limitations of relief resources are considered in the model. We employ a combination of the simulated annealing (SA) algorithm and the particle swarm optimization (PSO) algorithm method to solve the complex model. To optimize the result of our proposed algorithm, we absorb the group search, crossover, and mutation operator of GA into SA. We conduct a case study in a district of Beijing in China to validate the proposed methodology. Some computational experiments are conducted to analyze the impact of different factors, such as the target weight setting, selection of candidate shelters, and quantity of relief resources. [ABSTRACT FROM AUTHOR]

While facing the needs for Vehicle Infrastructure Integration (VII) applications in traffic management, the paper deals with the problem of locating Road Side Units (RSU) for VII deployment. After analyzing the difference between traditional problems of locating traffic information detector and the problem of RSU location, a significance ranking model for RSU localization and three kinds of Significance Degree (SD) computing strategies are put forward. A VII simulation environment for the purpose of RSU localization optimization within VISSIM microscopic traffic simulation software is established developing add-on functions using VISSIM's Component Object Model (COM). A VII test bed of the Olympic Park network in Beijing is taken as an example to evaluate the performance of RSU localization model. The results of simulation experiments indicate that the mixed SD strategy considering both speed and route monitoring is superior to the other two SD strategies. Then, the impact of RSU number and OBE market penetration rate on the evaluation measures of traffic monitoring are studied with reference to the proposed mixed SD strategy. In this case, the evaluation measures of optimized RSU configurations generated by the ranking algorithm are always better than those of random RSU configurations. In addition, the benefits of optimized RSU configurations increase along with RSU number and market penetration rate while the benefits of random RSU configurations are more fluctuant. [ABSTRACT FROM PUBLISHER]

A new harmonic power standard has been developed at the National Institute of Metrology (NIM), Beijing, China, for the calibration of harmonic power analyzers under nonsinusoidal conditions at fundamental frequencies of 50 and 60 Hz. The standard is based on digital sampling techniques that do not require synchronization. A compensation algorithm is presented in this paper. A new definition of the uncertainty for harmonic measurement is proposed that is referred to the fundamental. A characterization signal and its application are introduced. Results have shown that over its operating range of up to 50 A, 500 V, and the sixtieth-order harmonic, the harmonic power standard has uncertainties (k = 2) of less than 30 μV/V, 36 μA/A, and 42 μW/VA for voltage, current, and power measurements, respectively. [ABSTRACT FROM AUTHOR]

The values of ratio a of the linear relationship between specific attenuation and specific differential phase vary significantly in convective storms as a result of resonance scattering. The best-linear-fit ratio a at X band is determined using the modified attenuation correction algorithm based on differential phase and attenuation, as well as the premise that reflectivity is unattenuated in S band radar detection. Meanwhile, the systemic reflectivity bias between the X band radar and S band radar and water layer attenuation (ZW) on the wet antenna cover of the X band radar are also considered. The good performance of the modified correction algorithm is demonstrated in a moderate rainfall event. The data were collected by four X band dual-polarization (X-POL) radar sites, namely, BJXCP, BJXFS, BJXSY, and BJXTZ, and a China's New Generation Weather Radar (CINRAD/SA radar) site, BJSDX, in Beijing on 20 July 2016. Ratio a is calculated for each volume scan of the X band radar, with a mean value of 0.26 dB deg−1 varying from 0.20 to 0.31 dB deg−1. The average values of systemic reflectivity bias between the X band radar (at BJXCP, BJXFS, BJXSY, and BJXTZ) and S band radar (at BJSDX) are 0, −3, 2, and 0 dB, respectively. The experimentally determined ZW is in substantial agreement with the theoretically calculated ones, and their values are an order of magnitude smaller than rain attenuation. The comparison of the modified attenuation correction algorithm and the empirical-fixed-ratio correction algorithm is further evaluated at the X-POL radar. It is shown that the modified attenuation correction algorithm in the present paper provides higher correction accuracy for rain attenuation than the empirical-fixed-ratio correction algorithm. [ABSTRACT FROM AUTHOR]

Abstract: Nuclear technology applications have been very important research fields in Tsinghua University (THU) for more than 50 years. This paper describes two major directions and related projects running in THU concerning nuclear technology applications for radiation imaging and nuclear technology applications for astrophysics. Radiation imaging is a significant application of nuclear technology for all kinds of real world needs including security inspections, anti-smuggling operations, and medicine. The current improved imaging systems give much higher quality radiation images. THU has produced accelerating tubes for both industrial and medical accelerators with energy levels ranging from . Detectors have been produced for medical and industrial imaging as well as for high energy physics experiments such as the MRPC with fast time and position resolutions. DR and CT systems for radiation imaging systems have been continuously improved with new system designs and improved algorithms for image reconstruction and processing. Two important new key initiatives are the dual-energy radiography and dual-energy CT systems. Dual-energy CT imaging improves material discrimination by providing both the electron density and the atomic number distribution of scanned objects. Finally, this paper also introduces recent developments related to the hard X-ray modulation telescope (HXMT) provided by THU. [Copyright &y& Elsevier]