Search

This study aimed to explore the effect of induced electric field (IEF) treatment on acid hydrolysis of corn starch by altering the connection modes of sample coils of a 4-reactor IEF system. Results suggested that IEF treatment could enhance the hydrolysis of corn starch and series connection (1. RRRR, η = 16 E Si 2 P in 4 Z Si + Z load ) exhibited higher energy efficiency than parallel (9. (RRRR), η = 4 E Si 2 P in Z Si + 4 Z load ), thus contributing to more extensive hydrolysis. Although no new functional group was formed, the starch granules were partially cracked into pieces and the crystallinity was slightly increased after IEF-assisted hydrolysis. Differential scanning calorimetry results indicated that IEF-assisted hydrolysis increased the gelatinization temperatures but decreased the enthalpy of starch, with a greatest variation was observed by series connection. Rapid visco-analysis showed that IEF-assisted hydrolysis greatly decreased the pasting viscosity of corn starch and also series connection showed the strongest reduction. The obtained results could provide a theoretical guide for the applications of IEF technology in biomaterial processing. [Display omitted] • Induced electric field (IEF) could enhance the acid hydrolysis of corn starch. • IEF-assisted hydrolysis highly depends on the energy efficiency of IEF system. • Series connection of IEF reactors showed the highest energy efficiency. • IEF-assisted hydrolysis largely decreased the pasting viscosity of corn starch. • IEF-assisted hydrolysis increased gelatinization temperatures but decreased enthalpy. [ABSTRACT FROM AUTHOR]

Compared to traditional heating methods by static immersion or stirring, induced electric field (IEF) treatment can significantly increase hydrolysis rate of potato starch. The aim of this study was to examine the characterization of acid hydrolysis of granular potato starch under IEF. Potato starch was hydrolyzed using 0.15 mol/L HCl combined with IEF (IEF-HCl) at an excitation voltage of 75 V from 4 h to 120 h. The changes in granular, crystal, and molecular structure of starch granules during IEF-HCl hydrolysis were investigated. Scanning electron microscope analysis showed the outer surface of potato starch was firstly attacked by free ions and then the inner structures was completely disrupted and broken into pieces. X-ray diffraction studies indicated that the crystallinity decreased from 38.92% to 34.9% after 4-h hydrolysis, and then gradually increased to 41.88% as hydrolysis time increased to 96 h, but decreased thereafter. The weight-average molecular weight dramatically decreased from 104.7 × 10 6 Da to 9.291 × 10 6 Da in the first 24 h and then decreased gradually. These results suggested that there were three steps in the catalytic process of IEF-HCl hydrolysis. Initially, hydrogen ions destroyed the external crystalline shell of granules. Next, hydrogen ions attacked the loose amorphous region and dense crystalline part within starch granules simultaneously. Finally, the remaining crystalline region was hydrolyzed slowly. [ABSTRACT FROM AUTHOR]

The induced electric field assisted hydrochloric acid (IEF-HCl) hydrolysis of potato starch was investigated in a fluidic system. The impact of various reaction parameters on the hydrolysis rate, including reactor number (1–4), salt type (KCl, MgCl 2 , FeCl 3 ), salt concentration (3–12%), temperature (40–55 °C), and hydrolysis time (0–60 h), were comprehensively assessed. Under optimal conditions, the maximum reducing sugar content in the hydrolysates was 10.59 g/L. X-ray diffraction suggested that the crystallinity of IEF-HCl-modified starches increased with the intensification of hydrolysis but was lower than that of native starch. Scanning electron microscopy indicated that the surface and interior regions of starch granules were disrupted by the hydrolysis. The solubility of IEF-HCl-modified starches increased compared to native starch while their swelling power decreased, contributing to a decline in paste viscosity. These results suggest that IEF is a notable potential electrotechnology to conventional hydrolysis under mild conditions without any electrode touching the subject. [ABSTRACT FROM AUTHOR]

Creating a fluidic system with an induced electrical field is regarded as an innovative, eco-friendly practice for the hydrolysis of lignocellulosic biomass at mild conditions. A multi-series, reconfigurable fluidic reactor was developed based on the transformer concept for the efficient hydrolysis of sugarcane bagasse via the interconversion of magnetic and electrical energy. A secondary coil comprised of a mixture of sulfuric acid (or other metal electrolyte) and the sample in continuous flow was exposed to an induced electric field at 400–700 Hz to accelerate the hydrolysis. The results showed that using an induced electric field to assist hydrolysis is indeed beneficial in the production of reducing sugar (RS). The total reducing sugar (TRS) yield is positively impacted by the excitation voltage but is negatively impacted by voltage frequency and the sample solution impedance. The hydrolysis efficiency improves as the number of reactors increases in both series and parallel modes of the system. The mode of connection of the reactors has varying effect on the TRS yield owing to differences in the equivalent impedance, output power, and load power factor. Increased number of secondary coil turns also improves hydrolysis efficiency under the same input power and primary coil turns and thus increasing the TRS yield. Induced-electric-field-assisted hydrolysis (IEFAH) substantially enhances the yield (by 756% approximately, at 300 V, 400 Hz in a 4-series reactors for 24 h) compared to continuous flow heating hydrolysis (CFHH) at mild conditions (50 °C and 1% H 2 SO 4 ). The proposed fluidic system combined with an induced electric field shows remarkable potential as a green technology for the efficient hydrolysis of lignocellulosic biomasses without the use of metal electrodes. [ABSTRACT FROM AUTHOR]

A multi-series fluidic system based on the transformer concept was designed and built for the induced-electric-field-assisted extraction (IEFAE) of mulberry leaves polysaccharides (MLPs). Extraction was accelerated by exposing a secondary coil, made from a flowing mixture of sample grains and extractant, to a 20–80 kHz induced alternating electric field. The results indicate that this method benefits the release of polysaccharides without significantly affecting the quality of the products as evidenced by carbohydrate, protein, uronic acid, sulfuric radical and total polyphenol contents as well as average molecular weights and FT-IR . The polysaccharide yield improved as the excitation voltage increased, but the voltage frequency had a negative impact on the yield. At a solid-liquid ratio of 1:20 (g/mL), pH of 2.5, 60 °C temperature, 1000 V excitation voltage, and 20 kHz frequency, the 16-series system is performed optimally with a yield increased by 225.95% compared to the control (0 V). The relatively low environmental pH is conducive to extraction under the electric field, making the proposed system efficient for the extraction of valuable compounds without using metal electrode. [ABSTRACT FROM AUTHOR]

The effects of induced electric field (IEF) on the crystal structure and physicochemical properties of potato starch were investigated by subjecting identically treated control and electrically-modified samples to the same temperature history. Additionally, a method of combining IEF with heating for efficient modification of native polymer was also proposed. Results showed that the application of IEF at an electric voltage of 75 V has a statistically significant effect on starch gelatinization and pasting properties, especially when combined with heating at 50 °C. After treatment by the combination method for 96 h, the gelatinization temperatures increased, which can be explained by the slight increase in the ratio of 1044/1015 cm −1 and relative crystallinity. Furthermore, IEF reduced granular swelling and therefore contributed to decreasing the peak, breakdown, and setback viscosity of potato starch. This study explores the potential of IEF as innovative technology for starch modification. [ABSTRACT FROM AUTHOR]

The novel, previous unreported induction heating technique developed here uses the inverse process of the existing induction heating techniques. The theoretical basis for developing this technique is to determine whether the induced current passing through a winding food coil would induce a magnetic flux or cause an increase in primary current. Therefore, to develop this technique and implement it in the food industry, it is necessary to understand its technical details and engineering characteristics. This study presents the design and development process of the technique, as well as the calculation formulas, including load voltage, induced electric field, induced current density, heating power and energy utilization rate during the heating process. The results reveal that although the application of this innovative inner heating technique has been achieved, the energy efficiency of the current system is low. The thermal effect and non-thermal effect of the induced electric field decreased the total bacterial counts in the samples of grapefruit juice and raw milk. Image 10083 • Innovative induction heating is a sister technology to ohmic heating in the food industry. • Liquid food can act as the secondary winding of a transformer for inner heating. • A thermal effect on liquid foods by an alternating magnetic field was observed. • The development and design process of this novel technique are presented. • Continuous-flow pasteurization of liquid food was achieved by an induced electric field. [ABSTRACT FROM AUTHOR]

Non-conventional heating technology based on electric fields can be utilized to process liquid foods. In this study, the induced electric field (IEF) was investigated to clarify its inactivation mechanism on E.coli. Staining results show that inactivation of E.coli by IEF can be attributed to the reversible destruction of the cell membrane, followed by the denaturation of intracellular enzymes, and finally the irreversible rupture of the cell membrane. The increased levels of extracellular proteins and nucleic acids were also observed. IEF treatment at 400 Hz and 800 V (or 53 V/cm) results in a reduction of 4.5 log CFU·mL−1 in the number of E.coli. Storage life analysis shows that IEF treatment can improve the stability of apple juice and the content of bioactive components. Thus, IEF is a potential technique for liquid food processing. • The inactivation mechanism of induced electric field on E.coli was investigated. • A reduction of 4.5 log CFU·mL−1 of E.coli was realized by applying the IEF. • IEF treatment retains bio-active components in fresh apple juice. • The storage stability of apple juice was improved through IEF treatment. [ABSTRACT FROM AUTHOR]

• IEF-assisted hydrolysis enhanced with increasing DD of chitosan. • Electrical properties of chitosan showed no significant effect on the hydrolysis. • Structural compactness determined the hydrolysis behavior of different-DD chitosan. This study explored the impact of re-acetylation on induced electric field (IEF)-assisted hydrolysis of chitosan. Chitosan with different degree of deacetylation (DD) exhibited different charge content but similar electrical conductivity and output voltage of the electrolyte system, thus theoretically resulting in equivalent electro-processing efficiency. However, molecular and rheological measurements suggested that the hydrolysis rate decreased with an increase of DD. Re-acetylation had no significant effect on the molecular weight and viscosity of chitosan but damaged its granular and crystal structure, making chitosan chains more susceptible to the acid. The IEF-assisted hydrolysis of dissolved chitosan confirmed that the structural compactness of chitosan played a more important role on the hydrolysis than the charge content. This study extended current knowledge regarding the effect of charge content and structural compactness on IEF-assisted hydrolysis process, which contributed to the applications of IEF in biopolymer modification. [ABSTRACT FROM AUTHOR]