Search

This paper introduces a novel cross-sectional design for concrete-filled steel tubular (CFST) columns termed "concrete-filled double square steel tube" (CFDSST). The CFDSST columns incorporate an inner square steel tube positioned diagonally at 45° relative to the outer square steel tube, which serves as a stiffener for the outer tube. A three-dimensional finite element simulation model is presented to accurately predict the behavior of axially loaded CFDSST short columns. This model considers the influence of concrete confinement by the steel tubes. Experimental data are employed to validate the accuracy of the finite element model. The validated model is then utilized to assess the performance of the proposed columns, considering various geometric and material properties. The results highlight the substantial enhancement in structural performance achieved by the innovative CFDSST column configuration compared to conventional square CFST columns. The integration of the inner CFST components enhances both buckling resistance and the confinement mechanism of the column. This contributes to the increased load-bearing capacity, ductility, and residual strength of the columns. Notably, the steel tube thickness, the yield strength, and the concrete compressive strength greatly affect the performance of the column. Lastly, a simplified design model is formulated to predict the compressive capacity of the CFDSST stub columns, providing accurate outcomes validated by numerical analysis. • A new configuration of CFST columns is introduced. • Finite-element simulation model for CFDSST stub columns is developed. • The behavior of CFDSST stub columns is parametrically studied. • The proposed finite-element simulation and design models provide accurate predictions. [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratios (LHR-CFDST), as quintessential elements within offshore wind turbine structures, have received significant attention in contemporary times. As the scale of this type of structure continues to expand, an effective strategy to reduce steel consumption involves elevating the diameter-to-thickness (D/t) ratios of the steel tubes. Presently, there is a dearth of studies that explore the performance of LHR-CFDST columns in the case of thin-walled inner steel tubes. Four LHR-CFDST columns with varying D/t ratios of the inner tubes and one double-skin hollow steel tubular column were produced and tested under axial compression. The study encompassed an investigation into failure modes, local buckling behaviors, and ductility characteristics. The local buckling performance index of specimens with varying D/t ratios differed by up to 16.9%. Furthermore, the verified finite element model was subsequently employed for mechanistic analyses pertaining to the sandwiched concrete's stress distributions, and so on. When the peak loads were attained, the maximum variation in the stress values of the concrete of the specimens with different D/t ratios reached 50.4%. Subsequently, a multi-parameter impact analysis was applied to give a reasonable limit on the D/t ratio (225) of the inner steel tube for engineering design. Finally, the prevailing ultimate strength formulas outlined in established specifications were adapted by integrating the characteristics uncovered through this investigation. • Thin-walled inner tubes have a significant effect on CFDST with large hollow ratios • Inner tube's D/t ratio is positively correlated with the local buckling • Stress distribution and contact stresses in concrete are inextricably linked to the inner tube's D/t ratio • Multi-parameter impact analysis gives a reasonable limit of the D/t ratio for design • The equation considering the effect of buckling predict the CFDST columns with thin-walled inner tubes more accurately [ABSTRACT FROM AUTHOR]

• Two large-scale thin-walled CFDST columns with different stud spacing were tested under axial compression. • The stiffened studs delayed the occurrence of local buckling in these specimens significantly. • The arrangement of the studs leads to a obvious effect of section confinement, thus improving the overall compressive performance of the specimen. • The variability of the Poisson's ratio of concrete and steel during loading resulted in different stresses on the studs. • The current design specifications for calculating the peak load of CFDST columns are modified and used for the evaluation of the two large-scale thin-walled CFDST specimens in this study. Wind turbine towers offer good application potential for concrete-filled double-skin steel tubular columns with large hollow ratios (LHR-CFDST). With the increasing size of this engineering structure, the requirement to reduce construction expenses can be met by enhancing the diameter-to-thickness ratio of steel tubes. Few studies have been conducted to report on thin-walled LHR-CFDST columns. Meanwhile, local buckling and size effect shall be considered for this type of structure. Based on this, the first experimental investigation on large-scale stiffened thin-walled LHR-CFDST columns under axial compression is reported in this paper. Two large-scale thin-walled LHR-CFDST columns with different stud spacings are discussed. Failure modes, local buckling behaviours, load-strain responses, and some common mechanical indexes are investigated. According to the test results, adding studs was an effective method to increase the ultimate capacity of LHR-CFDST columns, as evidenced by the 16.6% increase in peak load for the specimen with smaller stud spacing than the other. Besides, the arrangement of studs leads to an obvious effect of section confinement, thus improving the overall compressive performance of the specimens. Then, four existing specifications all give a conservative prediction for the ultimate capacity of the specimen with smaller stud spacing, indicating that the large-scale thin-walled LHR-CFDST can be evaluated utilizing the present specifications with suitable stiffening measures. [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratio (LHR-CFDST) have been commonly used in recent years. With the increasing size of the engineering structures, one efficient way to decrease the consumption of steel is to increase the diameter-to-thickness ratio. Few studies have been conducted to report on thin-walled LHR-CFDST columns. At the same time, local buckling may occur in these structures in the absence of stiffening measures. Based on this, an experimental and numerical analysis was carried out for the stiffened thin-walled LHR-CFDST columns under axial compression in this paper. Five thin-walled LHR-CFDST columns with different stiffening measures (ribs, studs) were tested. The failure modes, load versus shortening curves, local buckling behaviours and ductility were investigated. The test results indicates that the stiffened measures effectively delayed the appearance of local buckling and increased the peak load. Besides, the finite element models validated by the test results were applied to the subsequent mechanical mechanism analysis of the stiffened thin-walled LHR-CFDST. It can be seen that the stiffened measures enhance the confinement of the inner and outer steel tubes on the concrete and greatly improve the ultimate strength of the concrete. Finally, the predicted peak load formulae in the existing design specifications were modified by combining the characteristics of the specimens in this paper. The peak load values obtained by the improved formulae agreed well with the test results. • Five thin-walled CFDST columns with different stiffening forms (ribs, studs) were tested under axial compression. • The effects of stiffeners on the local buckling and peak load of specimens were revealed. • The validated finite element model was developed to further analyze the structural mechanisms. • The interaction between steel tubes and concrete were investigated. • The predicted peak load formulae in the existing design specifications were modified. [ABSTRACT FROM AUTHOR]