Search

The demand for the functionalization of additive materials based on bacterial cellulose (BC) is currently high due to their potential applications across various sectors. The preparation of BC-based additive materials typically involves two approaches: in situ and ex situ. In situ modifications entail the incorporation of additive materials, such as soluble and dispersed substances, which are non-toxic and not essential for bacterial cell growth during the production process. However, these materials can impact the yield and self-assembly of BC. In contrast, ex situ modification occurs subsequent to the formation of BC, where the additive materials are not only adsorbed on the surface but also impregnated into the BC pellicle, while the BC slurry was homogenized with other additive materials and gelling agents to create composite films using the casting method. This review will primarily focus on the in situ and ex situ functionalization of BC then sheds light on the pivotal role of functionalized BC in advancing biomedical technologies, wound healing, tissue engineering, drug delivery, bone regeneration, and biosensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Tissue engineering has emerged as the best alternative to replacing damaged tissue/organs. However, the cost of scaffold materials continues to be a significant obstacle; thus, developing inexpensive scaffolds is strongly encouraged. In this study, cellulose microfibers (C), gelatin (G), egg white (EW), and nanohydroxyapatite (nHA) were assembled into a quaternary scaffold using EDC-NHS crosslinking, followed by freeze-drying method. Cellulose microfibers as a scaffold have only received a limited amount of research due to the absence of an intrinsic three-dimensional structure. Gelatin, more likely to interact chemically with collagen, was used to provide a stable structure to the cellulose microfibers. EW was supposed to provide the scaffold with numerous cell attachment sites. nHA was chosen to enhance the scaffold's bone-bonding properties. Physico-chemical, mechanical, and biological characterization of scaffolds were studied. In-vitro using MG-63 cells and in-ovo studies revealed that all scaffolds were biocompatible. The results of the DPPH assay demonstrate the ability of CGEWnHA to reduce free radicals. The CGEWnHA scaffold exhibits the best properties with 56.84 ± 28.45 μm average pore size, 75 ± 1.4 % porosity, 39.23 % weight loss, 109.19 ± 0.98 kPa compressive modulus, and 1.72 Ca/P ratio. As a result, the constructed CGEWnHA scaffold appears to be a viable choice for BTE applications., Competing Interests: Declaration of competing interest The authors have no conflict of interest., (Copyright © 2023. Published by Elsevier B.V.)

This study focuses on developing a microarchitectural bilayer structure for stimulating the two top layers of skin tissue (epidermis and dermis) fabricated using a one-step freeze-drying method. Cellulose nanofibers (CNFs) and poly (vinyl) alcohol (PVA) were used as a biocompatible scaffolding material, and the composition was designed in such a way that it provides physical and biological property attributes. In this work, scaffolding materials with integrated layer structures and well interconnected and open pore structures were obtained. This bilayer structure had porosity with a pore size of 19.72 μm and 90.71 μm for the simulation of the epidermis and dermis, respectively. The production and expression of laminin, collagen IV, and keratin 10 proteins in the bilayer cryogel scaffolds obtained from the immunofluorescence study were 49.7 %, 63.8 %, and 49.3 %, respectively. The extracellular matrix (ECM) was produced in each scaffold layer. The observations confirmed that the porosity and pore size of both N1 and N2 layers were appropriate for the fibroblast and keratinocyte cells, respectively. H&E stained cross-sections of bilayer cryogel scaffolds illustrated epidermal and dermal layers produced by co-culturing keratinocytes and fibroblasts. Based on the results, the bilayer CNF/PVA scaffold can be used in skin tissue engineering applications. However, more experiments and in vivo evaluations are needed to express this conclusion more accurately., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)

We hypothesized that use of a composite three-dimensionally (3D) printed scaffold with electrospun nanofibers in conjunction with recipient-site preconditioning with an external volume expansion (EVE) device would enable successful dermal tissue regeneration of a synthetic polymer scaffold. Cell viability, cell infiltration, extracellular matrix deposition, scaffold contraction, and mRNA expression by dermal fibroblasts cultured on three different scaffolds, namely, 3D-printed scaffold with a collagen coating, 3D-printed scaffold with an electrospun polycaprolactone nanofiber and collagen coating, and 3D-printed scaffold with an electrospun polycaprolactone/collagen nanofiber, were measured. Before scaffold implantation, rats were treated for 2 h with an EVE device to evaluate the effect of this device on the recipient site. Cell proliferation rates were significantly higher on the 3D-printed scaffold with electrospun polycaprolactone nanofiber and collagen coating than on the other scaffolds. In cell invasion studies, the 3D-printed scaffold with electrospun polycaprolactone nanofiber and collagen coating showed better cell integration than the other scaffolds. Under stereomicroscopy, fibroblasts adhered tightly to the electrospun area, and the fibroblasts effectively produced both collagen and elastin. Rat skin treated with an EVE device exhibited increased HIF-1α protein expression and capillary neoformation compared with control skin. Invasion of CD8 + cytotoxic lymphocytes surrounding the scaffold decreased when the recipient site was preconditioned with the EVE device. The composite 3D printed scaffold with electrospun nanofibers provided a favorable environment for proliferation, migration, and extracellular matrix synthesis by fibroblasts. Recipient-site preconditioning with an EVE device allowed for scaffold incorporation with less inflammation due to improved angiogenesis.

Tissue engineering intends to create functionalized tissues/organs for regenerating the injured parts of the body using cells and scaffolds. A scaffold as a supporting substrate affects the cells' fate and behavior, including growth, proliferation, migration, and differentiation. Hydrogel as a biomimetic scaffold plays an important role in cellular behaviors and tissue repair, providing a microenvironment close to the extracellular matrix with adjustable mechanical and chemical features that can provide sufficient nutrients and oxygen. To enhance the hydrogel performance and compatibility with native niche, the cell-laden hydrogel is an attractive choice to mimic the function of the targeted tissue. Injectable hydrogels, due to the injectability, are ideal options for in vivo minimally invasive treatment. Cell-laden injectable hydrogels can be utilized for tissue regeneration in a noninvasive way. This article reviews the recent advances and future opportunities of cell-laden injectable hydrogels and their functions in tissue engineering. It is expected that this strategy allows medical scientists to develop a minimally invasive method for tissue regeneration in clinical settings. Impact statement Cell-laden hydrogels have been vastly utilized in biomedical application, especially tissue engineering. It is expected that this upcoming review article will be a motivation for the community. Although this strategy is still in its early stages, this concept is so alluring that it has attracted all scientists in the community and specialists at academic health centers. Certainly, this approach requires more development, and a bunch of crucial challenges have yet to be solved. In this review, we discuss this various aspects of this approach, the questions that must be answered, the expectations associated with it, and rational restrictions to develop injectable cell-laden hydrogels.

Studying the development of unique materials from sustainable and renewable resources has gained increasing concern due to the depletion of fossil resources. Chitosan and its derivatives have been considered as versatile candidates for preparing attractive materials. The fabrication of chitosan/calcium phosphate composite compounds has received much attention for the development of numerous promising products in different fields. In this short review, recent preparation strategies for chitosan/calcium phosphate composites such as freeze casting, vacuum-assisted filtration, and biomimetic mineralization were discussed. The review presented their advances for diverse applications such as bone tissue engineering implants, drug delivery, wound healing, dental caries, as well adsorption of organic and heavy metals from polluted water. The challenges and future perspectives for the application of chitosan/calcium phosphate materials in biomedical and environmental applications were also involved in this review article., Competing Interests: Declaration of competing interest The author declares that he has no conflict of interests., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This paper reports on the hybrid process we have used for producing hierarchical scaffolds made of poly(lactic-co-glycolic) acid (PLGA) and nanohydroxyapatite (nHA), analyzes their internal structures via scanning electron microscopy, and presents the results of our in vitro proliferation of MC3T3-E1 cells and alkaline phosphatase activity (ALP) for 0 and 21 days. These scaffolds were produced by combining additive manufacturing (AM) and thermally induced phase separation (TIPS) techniques. Slow cooling at a rate of 1.5 °C/min during the TIPS process was used to enable a uniform temperature throughout the scaffolds, and therefore, a relatively uniform pore size range. We produced ten different scaffold compositions and topologies in this study. These scaffolds had macrochannels with diameters of ∼300 µm, ∼380 µm, and ∼460 µm, generated by the extraction of embedded porous 3D-plotted polyethylene glycol (PEG) matrices. The other experimental factors included different TIPS temperatures (-20 °C, -10 °C, and 0 °C), as well as varying PLGA concentrations (8%, 10%, and 12% w/v) and nHA content (0%, 10%, and 20% w/w). Our results indicated that almost all these macro/microporous scaffolds supported cell growth over the period of 21 days. Nevertheless, significant differences were observed among some scaffolds in terms of their support of cell proliferation and differentiation. This paper presents the results of our in vitro cell culture for 0 and 21 days. Our optimal scaffold with a porosity of ∼90%, a modulus of ∼5.2 MPa, and a nHA content of 20% showed a cell adhesion of ∼29% on day 0 and maintained cell proliferation and ALP activity over the 21-day in vitro culture. Hence, the use of additive manufacturing and designed experiments to optimize the scaffold fabrication parameters resulted in superior mechanical properties that most other studies using TIPS.

A major limitation in the bio-medical sector is the availability of materials suitable for bone tissue engineering using stem cells and methodology converting the stochastic biological events towards definitive as well as efficient bio-mineralization. We show that osteoblasts and Bone Marrow-derived Mesenchymal Stem Cell Pools (BM-MSCP) express TRPM8, a Ca 2+ -ion channel critical for bone-mineralization. TRPM8 inhibition triggers up-regulation of key osteogenesis factors; and increases mineralization by osteoblasts. We utilized CMT:HEMA, a carbohydrate polymer-based hydrogel that has nanofiber-like structure suitable for optimum delivery of TRPM8-specific activators or inhibitors. This hydrogel is ideal for proper adhesion, growth, and differentiation of osteoblast cell lines, primary osteoblasts, and BM-MSCP. CMT:HEMA coated with AMTB (TRPM8 inhibitor) induces differentiation of BM-MSCP into osteoblasts and subsequent mineralization in a dose-dependent manner. Prolonged and optimum inhibition of TRPM8 by AMTB released from the gels results in upregulation of osteogenic markers. We propose that AMTB-coated CMT:HEMA can be used as a tunable surface for bone tissue engineering. These findings may have broad implications in different bio-medical sectors.

Bone injuries and fractures generally take a long period to heal itself. To address this problem, bone tissue engineering (BTE) has gained significant research impetus. Among the several techniques used for scaffold fabrication, electrospinning ought to be the most promising technique for the development of the nanostructured scaffolds. The present study was carried out to fabricate an electrospun nanocomposite scaffold for BTE by using gelatin, polycaprolactone (PCL), and nanohydroxyapatite (nHAp). To prepare Gelatin-PCL-nHAp nanocomposite scaffold: Gelatin-PCL blend was electrospun and then treated with nHAp (1 wt%) for different time periods. The fabricated nanocomposite scaffold was analysed by field emission scanning electron microscopy (FESEM) to determine the fiber diameter and evaluate the fiber morphology. The Gelatin-PCL-nHAp nanocomposite scaffold-20 min exhibited the average fiber diameter of 615±269 nm and average pore size 4.7±1.04 μm, and also revealed the presence of nHAp particles over the Gelatin-PCL scaffold surface. Further, X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy and thermogravimetric (TG) analysis also indicated the deposition of nHAp over the Gelatin-PCL scaffold surface. MTT assay and DNA quantification showed good viability and significant proliferation of human osteoblasts on Gelatin-PCL-nHAp nanocomposite scaffold. Moreover, cell-scaffold constructs illustrated efficient cellular attachment and adequately spread cells, and it also depicts characteristic polygonal morphology of osteoblasts over the Gelatin-PCL-nHAp nanocomposite scaffold. Thus, the results of in-vitro analysis of electrospun nanocomposite scaffold suggest that the Gelatin-PCL-nHAp scaffold can be a potential candidate for BTE applications., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cellulose, a polysaccharide of β (1-4) linked D-glucose units, is a cheap, eco-friendly and most abundant natural polymer on this planet. Among various cellulosic materials, cotton cellulose is readily available, lignin-free, FDA approved, and widely used in the medical field because of its higher degree of biocompatibility and non-cytotoxic nature. Though cotton cellulose showed essential material properties for scaffold design, the least priority had been given to this material. The present study aimed at exploring the fabrication of scaffold using cotton microfibers for bone tissue engineering application. The study also aimed at improving the mechanical, physio-chemical and osteogenic properties of the microfibrous scaffold by crosslinking with citric acid and further modified with gelatin. FTIR indicated some interactions between cellulose, citric acid and gelatin within the scaffolds, while XRD results demonstrated the crystalline nature of scaffolds. Porosity and swelling studies demonstrated that all scaffolds are hydrophilic and porous. The microporous interconnected network of scaffolds was confirmed by FESEM. FESEM micrographs and MTT assay confirmed that all scaffolds were nontoxic to MG 63. Based on findings, it was concluded that gelatin coated cotton cellulose microfibers crosslinked with citric acid scaffold would be a potential template for bone tissue engineering.

This study intended to design novel nanofibrillated cellulose/cyclodextrin-based 3D scaffolds loaded with raloxifene hydrochloride for bone regeneration. The scaffolds were prepared using two different types of cyclodextrins namely; beta-cyclodextrin and methyl-beta-cyclodextrin. The prepared scaffolds were evaluated by characterizing their porosity, compressive strength, in-vitro drug release, FT-IR and XRD as well as their morphological properties using SEM. Results presented that the prepared scaffolds were highly porous, additionally, the scaffold containing drug/beta-cyclodextrin kneaded complex (SC5) showed the most controlled drug release pattern with the least burst effect and reached almost complete release at 480 h. The in-vitro cytocompatibility and regenerative effect of the chosen scaffold (SC5) was assessed using Saos-2 cell line. Results proved that SC5 was biocompatible. Moreover, it enhanced the cell adhesion, alkaline phosphatase enzyme expression and calcium ion deposition which are essential factors for bone mineralization. The obtained observations presented a novel, safe and propitious approach for bone engineering., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cotton is cheap, easily available and widely used as surgical material. Therefore, cotton would be good raw material to design a scaffold for tissue engineering applications. In this work, the gelatin-coated microfibrous paper scaffold was fabricated successfully by a papermaking process. Microfibers-based scaffold could overcome the limitations of nanofibrous material-based scaffold for tissue engineering application. The physicochemical and mechanical properties of the scaffolds were characterized. The results revealed that the gelatin contributed to the enhanced cell attachment and proliferation over the scaffolds, whereas cellulose as a strong backbone in the scaffold to support it for keeping its appearance. Their tensile strength and water absorption capacity were improved, but pore size and porosity were decreased after incorporation of gelatin. Hence, results suggested that fabricated scaffolds have huge prospective as a bioactive, well-designed and economical scaffold stand for tissue engineering application.

Loss of ovarian function (e.g., due to menopause) leads to profound physiological effects in women including changes in sexual function and osteoporosis. Hormone therapies are a known solution, but their use has significantly decreased due to concerns over cardiovascular disease and certain cancers. We recently reported a tissue-engineering strategy for cell hormone therapy (cHT) in which granulosa cells and theca cells are encapsulated to mimic native ovarian follicles. cHT improved physiological outcomes and safety compared to pharmacological hormone therapies in a rat ovariectomy model. However, cHT did not achieve estrogen levels as high as ovary-intact animals. In this report, we examined if hormone secretion from cHT constructs is impacted by incorporation of bone marrow-derived mesenchymal stem cells (BMSC) since these cells contain regulatory factors such as aromatase necessary for estrogen production. Incorporation of BMSCs led to enhanced estrogen secretion in vitro. Moreover, cHT constructs with BMSCs achieved estrogen secretion levels significantly greater than constructs without BMSCs in ovariectomized rats from 70 to 90 days after implantation, while also regulating pituitary hormones. cHT constructs with BMSC ameliorated estrogen deficiency-induced uterine atrophy without hyperplasia. The results indicate that inclusion of BMSC in cHT strategies can improve performance.

The aim of this study was to fabricate a novel bilayer scaffold containing cellulose nanofiber/poly (vinyl) alcohol (CNF/PVA) to evaluate its potential use in skin tissue engineering. Here, the scaffolds were fabricated using a novel one-step freeze-drying technique with two different concentrations of the aforementioned polymers. FE-SEM analysis indicated that the fabricated scaffolds had interconnected pores with two defined pore size in each layer of the bilayer scaffolds that can recapitulate the two layers of the dermis and epidermis of the skin. Lower concentration of polymers causes higher porosity with larger pore size and increased water uptake and decreased mechanical strength. FTIR proved the presence of functional groups and strong hydrogen bonding between the molecules of CNF/PVA and the efficient crosslinking. The MTT assay showed that these nanofibrous scaffolds meet the requirement as a biocompatible material for skin repair. Here, for the first time, we fabricated bilayer scaffold using a novel one-step freeze-drying technique only by controlling the polymer concentration with spending less time and energy., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Here, a spotlight is shown on aqueous microgel particles which exhibit a great potential for various biomedical applications such as drug delivery, cell imaging, and tissue engineering. Herein, different synthetic methods to develop microgels with desirable functionality and properties along with degradable strategies to ensure their renal clearance are briefly presented. A special focus is given on the ability of microgels to respond to various stimuli such as temperature, pH, redox potential, magnetic field, light, etc., which helps not only to adjust their physical and chemical properties, and degradability on demand, but also the release of encapsulated bioactive molecules and thus making them suitable for drug delivery. Furthermore, recent developments in using the functional microgels for cell imaging and tissue regeneration are reviewed. The results reviewed here encourage the development of a new class of microgels which are able to intelligently perform in a complex biological environment. Finally, various challenges and possibilities are discussed in order to achieve their successful clinical use in future., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Encapsulating, or immunoisolating, insulin-secreting cells within implantable, semipermeable membranes is an emerging treatment for type 1 diabetes. This approach can eliminate the need for immunosuppressive drug treatments to prevent transplant rejection and overcome the shortage of donor tissues by utilizing cells derived from allogeneic or xenogeneic sources. Encapsulation device designs are being optimized alongside the development of clinically viable, replenishable, insulin-producing stem cells, for the first time creating the possibility of widespread therapeutic use of this technology. Here, we highlight the status of the most advanced and widely explored implementations of cell encapsulation with an eye toward translating the potential of this technological approach to medical reality., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Tissue engineering using three-dimensional porous scaffolds has shown promise for the restoration of normal function in injured and diseased tissues and organs. Rigorous control over scaffold architecture in melt extrusion additive manufacturing is highly restricted mainly due to pronounced variations in the deposited strand diameter upon any variations in process conditions and polymer viscoelasticity. We have designed an I-optimal, split-plot experiment to study the extrudate swell in melt extrusion additive manufacturing and to control the scaffold architecture. The designed experiment was used to generate data to relate three responses (swell, density, and modulus) to a set of controllable factors (plotting needle diameter, temperature, pressure, and the dispensing speed). The fitted regression relationships were used to optimize the three responses simultaneously. The swell response was constrained to be close to 1 while maximizing the modulus and minimizing the density. Constraining the extrudate swell to 1 generates design-driven scaffolds, with strand diameters equal to the plotting needle diameter, and allows a greater control over scaffold pore size. Hence, the modulus of the scaffolds can be fully controlled by adjusting the in-plane distance between the deposited strands. To the extent of the model's validity, we can eliminate the effect of extrudate swell in designing these scaffolds, while targeting a range of porosity and modulus appropriate for bone tissue engineering. The result of this optimization was a predicted modulus of 14 MPa and a predicted density of 0.29 g/cm 3 (porosity ≈ 75%) using polycaprolactone as scaffold material. These predicted responses corresponded to factor levels of 0.6 μm for the plotting needle diameter, plotting pressure of 2.5 bar, melt temperature of 113.5 °C, and dispensing speed of 2 mm/s. The validation scaffold enabled us to quantify the percentage difference for the predictions, which was 9.5% for the extrudate swell, 19% for the density, and 29% for the modulus.

This study reports the development of biological/synthetic scaffolds for bone tissue engineering (TE) via 3D bioplotting. These scaffolds were composed of poly(L-lactic-co-glycolic acid) (PLGA), type I collagen, and nano-hydroxyapatite (nHA) in an attempt to mimic the extracellular matrix of bone. The solvent used for processing the scaffolds was 1,1,1,3,3,3-hexafluoro-2-propanol. The produced scaffolds were characterized by scanning electron microscopy, microcomputed tomography, thermogravimetric analysis, and unconfined compression test. This study also sought to validate the use of finite-element optimization in COMSOL Multiphysics for scaffold design. Scaffold topology was simplified to three factors: nHA content, strand diameter, and strand spacing. These factors affect the ability of the scaffold to bear mechanical loads and how porous the structure can be. Twenty four scaffolds were constructed according to an I-optimal, split-plot designed experiment (DE) in order to generate experimental models of the factor-response relationships. Within the design region, the DE and COMSOL models agreed in their recommended optimal nHA (30%) and strand diameter (460 μm). However, the two methods disagreed by more than 30% in strand spacing (908 μm for DE; 601 μm for COMSOL). Seven scaffolds were 3D-bioplotted to validate the predictions of DE and COMSOL models (4.5-9.9 MPa measured moduli). The predictions for these scaffolds showed relative agreement for scaffold porosity (mean absolute percentage error of 4% for DE and 13% for COMSOL), but were substantially poorer for scaffold modulus (51% for DE; 21% for COMSOL), partly due to some simplifying assumptions made by the models. Expanding the design region in future experiments (e.g., higher nHA content and strand diameter), developing an efficient solvent evaporation method, and exerting a greater control over layer overlap could allow developing PLGA-nHA-collagen scaffolds to meet the mechanical requirements for bone TE.

The aim of this study was to evaluate the in vitro osteogenic effects and in vivo new bone formation of three-dimensional (3D) printed alendronate (Aln)-releasing poly(caprolactone) (PCL) (Aln/PCL) scaffolds in rat tibial defect models. 3D printed Aln/PCL scaffolds were fabricated via layer-by-layer deposition. The fabricated Aln/PCL scaffolds had high porosity and an interconnected pore structure and showed sustained Aln release. In vitro studies showed that MG-63 cells seeded on the Aln/PCL scaffolds displayed increased alkaline phosphatase (ALP) activity and calcium content in a dose-dependent manner when compared with cell cultures in PCL scaffolds. In addition, in vivo animal studies and histologic evaluation showed that Aln/PCL scaffolds implanted in a rat tibial defect model markedly increased new bone formation and mineralized bone tissues in a dose-dependent manner compared to PCL-only scaffolds. Our results show that 3D printed Aln/PCL scaffolds are promising templates for bone tissue engineering applications.

Tunable erosion of polymeric materials is an important aspect of tissue engineering for reasons that include cell infiltration, controlled release of therapeutic agents, and ultimately to tissue healing. In general, the biological response to proteinaceous polymeric hydrogels is favorable (e.g., minimal inflammatory response). However, unlike synthetic polymers, achieving tunable erosion with natural materials is a challenge. Keratins are a class of intermediate filament proteins that can be obtained from several sources, including human hair, and have gained increasing levels of use in tissue engineering applications. An important characteristic of keratin proteins is the presence of a large number of cysteine residues. Two classes of keratins with different chemical properties can be obtained by varying the extraction techniques: (1) keratose by oxidative extraction and (2) kerateine by reductive extraction. Cysteine residues of keratose are "capped" by sulfonic acid and are unable to form covalent cross-links upon hydration, whereas cysteine residues of kerateine remain as sulfhydryl groups and spontaneously form covalent disulfide cross-links. Here, we describe a straightforward approach to fabricate keratin hydrogels with tunable rates of erosion by mixing keratose and kerateine. SEM imaging and mechanical testing of freeze-dried materials showed similar pore diameters and compressive moduli, respectively, for each keratose-kerateine mixture formulation (∼1200 kPa for freeze-dried materials and ∼1.5 kPa for hydrogels). However, the elastic modulus (G') determined by rheology varied in proportion with the keratose-kerateine ratios, as did the rate of hydrogel erosion and the release rate of thiol from the hydrogels. The variation in keratose-kerateine ratios also led to tunable control over release rates of recombinant human insulin-like growth factor 1.

Polymeric biomaterials that provide a matrix for cell attachment and proliferation while achieving delivery of therapeutic agents are an important component of tissue engineering and regenerative medicine strategies. Keratins are a class of proteins that have received attention for numerous tissue engineering applications because, like other natural polymers, they promote favorable cell interactions and have non-toxic degradation products. Keratins can be extracted from various sources including human hair, and they are characterized by a high percentage of cysteine residues. Thiol groups on reductively extracted keratin (kerateine) form disulfide bonds, providing a more stable cross-linked hydrogel network than oxidatively extracted keratin (keratose) that cannot form disulfide crosslinks. We hypothesized that an iodoacetamide alkylation (or "capping") of cysteine thiol groups on the kerateine form of keratin could be used as a simple method to modulate the levels of disulfide crosslinking in keratin hydrogels, providing tunable rates of gel erosion and therapeutic agent release. After alkylation, the alkylated kerateines still formed hydrogels and the alkylation led to changes in the mechanical and visco-elastic properties of the materials consistent with loss of disulfide crosslinking. The alkylated kerateines did not lead to toxicity in MC3T3-E1 pre-osteoblasts. These cells adhered to keratin at levels comparable to fibronectin and greater than collagen. Alkylated kerateine gels eroded more rapidly than non-alkylated kerateine and this control over erosion led to tunable rates of delivery of rhBMP-2, rhIGF-1, and ciprofloxacin. These results demonstrate that alkylation of kerateine cysteine residues provides a cell-compatible approach to tune rates of hydrogel erosion and therapeutic agent release within the context of a naturally-derived polymeric system., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The repair of osteochondral defects requires a tissue engineering approach that aims at mimicking the physiological properties and structure of two different tissues (cartilage and bone) using specifically designed scaffold-cell constructs. Biphasic and triphasic approaches utilize two or three different architectures, materials, or composites to produce a multilayered construct. This article gives an overview of some of the current strategies in multiphasic/gradient-based scaffold architectures and compositions for tissue engineering of osteochondral defects. In addition, the application of finite element analysis (FEA) in scaffold design and simulation of in vitro and in vivo cell growth outcomes has been briefly covered. FEA-based approaches can potentially be coupled with computer-assisted fabrication systems for controlled deposition and additive manufacturing of the simulated patterns. Finally, a summary of the existing challenges associated with the repair of osteochondral defects as well as some recommendations for future directions have been brought up in the concluding section of this article., (© 2014 Wiley Periodicals, Inc.)

Three-dimensional (3D) hepatocyte cultures have attracted much attention to obtain high biological functions of hepatocyte for pharmaceutical drug assessment. However, maintaining the high functions for over one month is still a key challenge although many approaches have been reported. In this study, we demonstrate for the first time simple and rapid construction of 3D-hepatocyte constructs by our cell accumulation technique and their high biological functions for one month, without any medium change. The human hepatocyte carcinoma (HepG2) cells were coated with ∼ 7 nm-sized extracellular matrix (ECM) films consisting of fibronectin (FN) and gelatin (G), and then incubated in cell culture insert to construct 3D-tissue constructs for 24 h. The thickness of obtained 3D-HepG2 constructs was easily controlled by altering seeding cell number and the maximum is over 100 μm. When a large volume of culture media was employed, the 3D-constructs showed higher mRNA expression of albumin and some cytochrome P450 (CYP) enzymes as compared to general two-dimensional (2D) culture. Surprisingly, their high cell viabilities (over 80%) and high mRNA expressions were successfully maintained without medium change for at least 27 days. These results demonstrate novel easy and rapid technique to construct 3D-human liver tissue models which can maintain their high functions and viability for 1 month without medium change., (© 2014 Wiley Periodicals, Inc.)

Tissue engineering makes use of the principles of biology and engineering to sustain 3D cell growth and promote tissue repair and/or regeneration. In this study, macro/microporous scaffold architectures have been developed using a hybrid solid freeform fabrication/thermally induced phase separation (TIPS) technique. Poly(lactic-co-glycolic acid) (PLGA) dissolved in 1,4-dioxane was used to generate a microporous matrix by the TIPS method. The 3D-bioplotting technique was used to fabricate 3D macroporous constructs made of polyethylene glycol (PEG). Embedding the PEG constructs inside the PLGA solution prior to the TIPS process and subsequent extraction of PEG following solvent removal (1,4-dioaxane) resulted in a macro/microporous structure. These hierarchical scaffolds with a bimodal pore size distribution (<50 and >300 μm) contained orthogonally interconnected macro-channels generated by the extracted PEG. The diameter of the macro-channels was varied by tuning the dispensing parameters of the 3D bioplotter. The in vitro cell culture using murine MC3T3-E1 cell line for 21 days demonstrated that these scaffolds could provide a favorable environment to support cell adhesion and growth.

Tissue engineering makes use of 3D scaffolds to sustain three-dimensional growth of cells and guide new tissue formation. To meet the multiple requirements for regeneration of biological tissues and organs, a wide range of scaffold fabrication techniques have been developed, aiming to produce porous constructs with the desired pore size range and pore morphology. Among different scaffold fabrication techniques, thermally induced phase separation (TIPS) method has been widely used in recent years because of its potential to produce highly porous scaffolds with interconnected pore morphology. The scaffold architecture can be closely controlled by adjusting the process parameters, including polymer type and concentration, solvent composition, quenching temperature and time, coarsening process, and incorporation of inorganic particles. The objective of this review is to provide information pertaining to the effect of these parameters on the architecture and properties of the scaffolds fabricated by the TIPS technique., (© 2014 Wiley Periodicals, Inc.)

Interest in xylan-rich hemicelluloses (XH) film is growing, and efforts have been made to prepare XH films with improved mechanical properties. This work described an effective approach to produce nanocomposite films with enhanced mechanical properties by incorporation of cellulose nanofibers (CNFs) into XH. Aqueous dispersions of XH (64-75 wt %), sorbitol (16-25 wt %), and CNF (0-20 wt %) were cast at a temperature of 23 °C and 50% relative humidity. The surface morphology of the films was revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The thermal properties and crystal structure of the films were evaluated by thermal analysis (TG) and X-ray diffraction (XRD). The surface of XH films with and without CNF was composed primarily of nanonodules, and CNFs were embedded in the XH matrix. Freeze-dried XH powder was amorphous, whereas the films with and without CNF showed a distinct peak at around 2θ = 18°, which suggested that XH molecules aggregated or reordered in the casting solution or during water evaporation. Furthermore, the nanocomposite films had improved thermal stability. XH film with 25 wt % plasticizer (sorbitol, based on dry XH weight) showed poor mechanical properties, whereas incorporation of CNF (5-20 wt %, based on the total dry mixture) into the film resulted in enhanced mechanical properties due to the high aspect ratio and mechanical strength of CNF and strong interactions between CNF and XH matrix. This effective method makes it possible to produce hemicellulose-based biomaterials of high quality.

The feasibility of thermal ink jet printing as a robust process for biosurface engineering was demonstrated. The strategy investigated was to reconstruct a commercial printer and take advantage of its colour management interface. High printing resolution was achieved by formulating bio-inks of viscosity and surface tension similar to those of commercial inks. Protein and enzyme denaturation during thermal ink jet printing was shown to be insignificant. This is because the time spent by the biomolecules in the heating zone of the printer is negligible; in addition, the air and substrate of high heat capacity absorb any residual heat from the droplet. Gradients of trophic/tropic factors can serve as driving force for cell growth or migration for tissue regeneration. Concentration gradients of proteins were printed on scaffolds to show the capability of ink jet printing. The printed proteins did not desorb upon prolonged immersion in aqueous solutions, thus allowing printed scaffold to be used under in vitro and in vivo conditions. Our group portrait was ink jet printed with a protein on paper, illustrating that complex biopatterns can be printed on large area. Finally, patterns of enzymes were ink jet printed within the detection and reaction zones of a paper diagnostic.