Search

In this study, salicylic acid (SA) dopped into poly(3-hydroxybutyrate) (PHB) and prepared nanoparticles (NPs) to increase encapsulation efficiency, anti-cancer activity of caffeic acid (Caff), and folic acid (FA) for breast cancer treatment. NPs were prepared by solvent evaporation method and characterised by FTIR, DSC, SEM, and entrapment-loading efficiencies. The mean diameter, polydispersity index (PDI), and zeta potential (ZP) were evaluated by dynamic light scattering (DLS). In vitro release and stability studies were done via eppendorf method. The cytotoxicity, cell dead and internalisation of NPs were shown by MTT, fluorescein and confocal microscopy. The diameter and ZP of NPs were 172 ± 7 nm and −29 ± 0.38 mV. The entrapment efficiencies of 5 and 10 Caff NPs were 79 ± 0.23% and 70 ± 0.42%. NPs showed good stability within 30 d and sustained release over 25 d. FA-5Caff NPs showed 37 ± 0.3% viability on MCF-7. FA-Caff NPs were identified as promising carrier system for breast cancer therapy. [ABSTRACT FROM AUTHOR]

We did a prospective consecutive study of prophylaxis for heterotopic ossification (HO) comparing indomethacin (100 mg/day) and salmon calcitonin (3 MRC-U/kg/day) for 14 days. Each group consisted of 30 patients. 19 patients in the indomethacin group and 2 in the calcitonin group developed HO. We conclude that use of calcitonin in the prophylaxis of HO after total hip replacement is more effective than indomethacin. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a practical orbital shaker-assisted magnetic solid phase extraction (OSA-MSPE) method for the determination of lead by FAAS. A new magnetic poly linoleic acid-polystyrene-polydimethylsiloxane (PSt-PLina-PDMS) hydrophobic graft copolymer was synthesized and characterized by NMR, FT-IR, SEM-EDX, DSC, TGA, BET and used as adsorbent for the extraction of Pb (II). This adsorbent can be used at least 50 times without any decrease of its adsorption properties for the adsorption and elution of analyte ions. Several analytical parameters including pH, adsorbent amount, sample volume, shaking time, etc. were optimized. Multivariate optimization was used for the investigation of different parameters. The linear range at optimum operating condition was 1.7-84 μg L -1 . The limit of detection (LOD) and limit of quantification (LOQ) were 0.5 μg L -1 , 1.7 μg L -1 , respectively. Intraday and interday relative standard deviation (RSD %), enhancement factor (EF) and adsorbent capacity were found as 1.9%, 3.3%, 166.7, 50 mg g -1 , respectively. OSA-MSPE method was tested with certified reference materials including LGC-6010 (Hard Drinking Water), NCS ZC73032 Celery and CS-M-3 Control Sample Microelements in Mushroom Powder for the accuracy. Experimental results for lead were confirmed with certified values. Present method was successfully applied to various liquid and solid food samples. The OSA-MSPE method has some important features such as selective, sensitive, low LOD, LOQ and RSD, pre-concentration factor (PF) and high enhancement factor (EF). High tolerance limits against matrix ions were achieved., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

N-doped carbon nanospheres and porous carbon were produced by a hydrothermal template and the activation of hexamethylenetetramine (HMTA as a nitrogen source and activator) and ZnCl 2 (only as an activator) from a poly(Ri-S-ε-CL-PDMS) multiblock/graft copolymer produced using a renewable resource and eco-friendly autoxidation. N-doped carbon nanospheres (PPiSiHMTA) exhibited excellent CO 2 adsorption (2.73 mmol/g at 0 °C and 0.15 atm, 1.72 mmol/g at 25 °C and 0.15 atm) and CO 2 /N 2 selectivity (344-512). Despite the higher BET surface area and pore volume, porous carbon (PPiSi) showed low CO 2 adsorption (1.21 and 0.71 mmol/g, 0.15 atm) and CO 2 /N 2 selectivity (57 and 112). PPiSiHMTA and PPiSi have low isosteric heats of adsorption (Qst, 18-33 kJ/mol) and stability in humid environments. In addition, PPiSiHMTA exhibited an excellent CO 2 recycling performance. The experimental data on CO₂ adsorption was evaluated using various isotherm models, including Freundlich, Langmuir, Sips, and Temkin. The results demonstrated a nearly perfect fit between the Freundlich isotherm and the experimental data, indicating the heterogeneous nature of the adsorbent surfaces. Our study is promising for industrial applications, offering excellent CO 2 adsorption, CO 2 /N 2 selectivity, moisture stability, and porous material fabrication strategies., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A wide range of active agents, synthetic and natural agents such as essential oils, chitosan and polyphneols consisting of curcumin, gallic acid, anthocyanins, and catechins have been used in order to develop antimicrobial packaging systems, and among them, natural polyphenolic compounds, specially curcumin (Cur) has great potential due to effective biological activities in developing food packaging material. Quercetin (Quer) is also the mostly studied flavonol as a color-changing indicator in the food industry and has been already developed as a realistic alternative for smart and active food packaging. The reason for choosing these two polyphenolic compounds is that they simultaneously possess many beneficial properties such as antioxidant, antibacterial, antiviral, antitumoral, and anti-inflammatory effects. Additionally, the main objective of the study is to combine polypropylene (PP), which is the most preferred and cost-effective polymer in the packaging industry, with these active ingredients, rather than using more expensive polymer types. In this context, PP-Quer or PP-Cur membranes, which are new experiences based on these literatures were chemically characterized by Fourier transform infrared spectroscopy, and the surface morphology of these composite membranes was characterized by scanning electron microscopy. The antibacterial response against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria species was investigated. Furthermore, the reactive oxygen species generation and anticancer activity of these composite membranes using human colorectal adenocarcinoma (HT-29) were observed. We proposed that PP-Quer or PP-Cur composite membranes can be a potential candidate as active packaging material in the food industry., (© 2024 The Author(s). Journal of Food Science published by Wiley Periodicals LLC on behalf of Institute of Food Technologists.)

A simple and effective ultrasound-assisted dispersive micro solid-phase extraction (UA-dμSPE) method was developed for the spectrophotometric determination of traces maneb in food and water. In this study, a new hybrid block copolymer poly (vinyl benzyl chloride-b-dimethyl aminoethyl methacrylate) (Pvb-DMA) was synthesized and characterized using techniques such as FTIR, SEM-EDX. The synthesized Pvb-DMA was used as an adsorbent for the extraction of maneb for first time in this study. The effects of different experimental variables such as pH, adsorbent amount, sample volume, eluent type were optimized. The statistical toll factorial design was applied to estimate the individual and combined impact of parameters on the extraction of maneb. The applicability of different solvents such as acetone, methanol, ethanol, tetrahydrofuran, acetonitrile for maneb recovery from adsorbent was tested. The detection and quantification limits were found to be 3.3 ng mL -1 and 10.0 ng mL -1 , respectively. In addition, the preconcentration factor and linear range was obtained 300 and 10-500 ng mL -1 . The extraction recovery and relative standard deviation were found to be 95 % and 2.8 %, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

A new graft copolymer composed of polystyrene and polylinoleic acid (PLinas) with the sodium salt of iminodiacetate (Ida) was synthesized and used as an adsorbent. The vortex-assisted dispersive solid-phase micro-extraction (VA-dSPµE) method was used for the extraction and pre-concentration of chromium. Multivariate methodologies, such as factorial design and 3D surface plots, were applied for screening and optimizing effective extraction parameters. The influence of diverse analytical parameters, such as pH, sample volume, and interfering ions, on the extraction of chromium was studied. The calibration standard curve exhibited a linear range from 0.01 to 0.50 μg L -1 . The relative standard deviation and limit of detection were found to be 1.65 % and 0.003 μg L -1 , respectively. Extraction recoveries were found in the range of 96 to 99 % by using certified reference materials (CRMs). The adsorbent capacity of PLinas-Ida was found to be 112 mg g -1 . The VA-dSPµE method demonstrated its effectiveness in the pre-concentration and determination of chromium within samples of foodstuffs by graphite furnace-atomic absorption spectrometry (GF-AAS)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Competing Interests: The authors declare no conflicts of interest.

A new poly(3-hydroxy butyrate)-b-poly(dimethyl amino ethyl methacrylate) amphiphilic block copolymer containing gadolinium oxide nanoparticles (PHB-PDMAEMA-Gd 2 O 3 -NPs) were synthesized and used as composite adsorbent for extraction of total arsenic. Characterization of the composite adsorbent material PHB-PDMAEMA-Gd 2 O 3 -NP was studied using spectroscopic techniques. Plackett-Burman design and central composite design were employed to screening and optimization of the experimental parameters. This composite adsorbent was utilized in ultrasound assisted-dispersive solid phase microextraction (UA-dSPµE) for the determination of total inorganic arsenic in foodstuffs through hydride generation atomic absorption spectrometry (HG-AAS). It demonstrates a linear relationship across arsenic concentration range of 0.07-1.12 µg/L with a correlation coefficient (0.996). It's showed an enrichment factor of 128 and a limit of detection 0.02 µg/L for total inorganic arsenic determination. Accuracy of the developed method was confirmed through the analysis of certified reference materials with 96.0-98.5% recovery. It proved to be significantly useful UA-dSPµE method for determining total inorganic arsenic in different foodstuffs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

This work refers to the synthesis and characterization of poly (3-hydroxybutyrate)-b-oligo (2-ethyl oxazoline) (oligoEtOx). Cationic ring-opening polymerization of 2-ethyl oxazoline yielded poly (2-ethyl oxazoline) (oligoEtOx) with a hydroxyl end. Carboxylic acid-terminated PHB was reacted with oligoEtOx via dicyclohexylcarbodiimide chemistry to obtain PHB-b-oligoEtOx conjugates. The obtained PHB-b-oligoEtOx conjugates were successfully characterized by 1 H- and 13 C NMR, FTIR, DSC, and size exclusion chromatography. PHB-b-oligoEtOx conjugates can be promising biologic active materials., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Hazer, Altunordu Kalaycı and Koçak.)

A new polyoleic acid-polystyrene (PoleS) block/graft copolymer was synthesized and applied as adsorbent for ultrasound assisted dispersive solid phase microextraction (UA-DSPME) of Sb(III) in different bottled beverages and analysis using hydride generation atomic absorption spectrometry (HGAAS). Adsorption capacity of the PoleS was 150 mg g -1 . Several sample preparation parameters such as sorbent amount, solvent type, pH, sample volume and shaking time were optimized (based on central composite design (CCD) approach) and evaluated in respect to the recovery of Sb(III). The method revealed a high tolerance limit of matrix ions presence. Under optimized conditions, linearity range, the limit of detection, the limit of quantitation, extraction recovery, enhancement factor, preconcentration factor were 5-800 ng L -1 , 1.5 ng L -1 , 5.0 ng L -1 , 96%, 82, 90, respectively. Accuracy of the UA-DSPME method was confirmed based on different certified reference materials and standard addition method. Factorial design was utilized to estimate the influences of variables of recovery of Sb(III)., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: Cadmium (Cd) is a very toxic and carcinogenic heavy metal even at low levels and it is naturally present in water as well as in food. Methods: A new polyvinyl benzyl xanthate (PvbXa) was synthesized and used as a new adsorbent in this work. It contains pendant sulfide groups on the main polystyryl chain. Using this new adsorbent, PvbXa, a vortex-assisted dispersive solid-phase microextraction (VA-dSPµE) procedure was developed for the determination of cadmium from food and water samples via flame atomic absorption spectrophotometry (FAAS). Synthesized PvbXa was characterized by 1 H Nuclear magnetic resonance (NMR) Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS). The different parameters of pH, sample volume, mixing type and time, sorbent amount, and eluent time were optimized using standard analytical methods. Results: The optimized method for assessment of Cd in food and water samples shows good reliability. The optimum conditions were found to be a 0.20-150 µg L -1 linear range, 0.06 µg L -1 LOD, 0.20 µg L -1 LOQ, 4.3 RSD %, and a preconcentration factor of 160. Conclusions: The statistically experimental variables were utilized using a central composite design (CCD). The present method is a low-cost, simple, sensitive, and very effective tool for the recovery of Cd.

As a novel adsorbent, an opioid silver-morphine-functionalized polypropylene was synthesized through a one-pot reaction at room temperature and successfully used for the simple one-pot photocatalytic degradation catalyst of methyl orange removal from wastewater. UV spectral analysis reveals a special reference to the excitation of surface plasmon resonance as the main characteristic of the polymer-Ag nanocomposite in toluene solution peak at 420 nm in AgPP-mrp catalyst. The 1 H NMR spectrum showed no sign of Ag NP peaks revealing small size distribution in the channels of morphine-functionalized polypropylene polymer. The morphology of silver nanoparticle-doped polymer through scanning electron microscopy (SEM-EDX) reveals PP-mrp with continuous matrix and Ag NPs (0.87 wt%). Furthermore, photocatalytic degradation of methyl orange was investigated on AgPP-mrp catalyst spectrophotometrically under solar irradiation in waste effluent, demonstrating high degradation efficiency. According to experimental findings, silver nanoparticles (AgPP-mrp) achieved high degradation capacities of 139 mg/g equivalent to 97.4% of photodegradation in a little period of time (35 min), as associated with previously stated materials and follow pseudo-second-order kinetic degradation tail of a high regression coefficient (R 2  = 0.992). The suggested techniques offer a linear reaction for MO over the pH range of 1.5 to 5 and a degradation temperature of 25 to 60 °C. Central composite design and response surface methodology statistics recommend pH of the reaction medium and time as important variables for methyl orange degradation on AgPP-mrp photocatalytic. AgPP-mrp on the photocatalytic phenomenon based on heterojunction catalytic design producing electron holes (e-), as well as superoxides for the successful degradation of methyl orange., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Current artificial ligaments based on polyethylene terephthalate (PET) are associated with some disadvantages due to their hydrophobicity and low biocompatibility. In this study, we aimed to modify the surface of PET using polyethylene glycol (PEG)-terminated polystyrene (PS)-linoleic nanoparticles (PLinaS-g-PEG-NPs). We accomplished that BMP-2 in two different concentrations encapsulated in nanoparticles with an efficiency of 99.71 ± 1.5 and 99.95 ± 2.8%. While the dynamic contact angle of plain PET surface reduced from 116° to 115° after a measurement periods of 10 s, that of PLinaS-g-PEG-NPs modified PET from 80° to 17.5° within 0.35 s. According to in vitro BMP2 release study, BMP-2 was released 13.12 ± 1.76% and 45.47 ± 1.78% from 0.05 and 0.1BMP2-PLinaS-g-PEG-NPs modified PET at the end of 20 days, respectively. Findings from this study revealed that BMP2-PLinaS-g-PEG-NPs has a great potential to improve the artificial PET ligaments, and could be effectively applied for ACL reconstruction.

Objective: To compare the accuracy of glomerular filtration rate (GFR) estimation by 24-hour urinary creatinine clearance with GFR estimation by the Modification of Diet in Renal Disease (MDRD) equation, the Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI) equation, the Mayo Clinic Quadratic equation (MCQE), and the modified Cockcroft-Gault formula in patients with spinal cord injury (SCI)., Design: Cross-sectional study., Participants: Fifty-nine consecutive subjects, who were admitted to our hospital SCI rehabilitation and no additional acute medical disorders, were enrolled in this study. A 24-hour urine sample was collected for the determination of 24-hour urinary creatinine clearance, which was assumed as the standard technique for estimation of the GFR. The accuracy of several estimation formulas includes the 4-variable MDRD equation, the 6-variable MDRD equation, the Cockcroft and Gault equation, the CKD-EPI equation, and the MCQE., Results: GFRs calculated by the Cockcroft-Gault equation and 4-variable MDRD were significantly different from the 24-hour urinary creatinine clearance, whereas there were no significant differences in GFRs calculated by CKD-EPI (P = 1.000), Mayo Clinic Quadratic formula (P = 0.794), and 6-variable MDRD equations (P = 0.435) and 24-hour urinary creatinine clearance. Both the 6-variable MDRD equation and CKD-EPI were accurate within ±20 of the reference methods in 52.54% of the subjects., Conclusions: Among the methods used for estimation of the GFR including the 4- and 6-variable MDRD, the CKD-EPI, the modified Cockcroft-Gault equation, and the MCQE, the 6-variable MDRD equation and the CKD-EPI demonstrated best performance to estimate the GFR. However, none of the formulas were sufficient to estimate the GFR in SCI patients accurately.

A novel one step route for the synthesis of tannic acid, lipoic acid and menthol functionalized polyvinyl chloride, PVC, (PVC-Tann, PVC-Lip, PVC-Mnt) and chlorinated polypropylene, PP-Cl, (PP-Mnt, PP-Lip) was applied imparting antioxidative properties to the newly-formed materials. The resulting modified polymers were characterized by stress-strain mechanical measurement, 1 H NMR, gel permeation chromatography (GPC) and thermogravimetric (TGA) analysis. Linseed oil, owing to its high linolenic acid content, was used to track the autoxidation process. The chloride functional groups were reacted with the hydroxyl/carboxylic acid of the natural compounds in the presence of a base. Linseed oil was poured into the natural compound functionalized PVC covered Petri dish to undergo autoxidation under white light. Each of the PVC- and PP-Cl-based polymers was active in delaying autoxidation. The PP-Mnt series and PP-Lip polymers all delayed autoxidation by 8 days over the PP-Cl precursor material. The autoxidation process was further confirmed by monitoring peroxide formation in the exposed linseed oil samples through differential scanning calorimeter (DSC) analysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

A new and novel poly(vinyl benzyl dithiocarbonate-dimethyl amino ethyl methacrylate) block copolymer (Pvb-DMA-Xa) as adsorbent was synthesized for the vortex-assisted dispersive solid phase microextraction (VA-DSPME) of patulin from apple products and dried fruits using Uv-visible spectrophotometer. The characterization of synthesized Pvb-DMA-Xa block copolymer was performed with Fourier Transform Infrared spectroscopy (FTIR-ATR) technique. Analytical characteristics such as pH, sorbent amount, adsorption time, eluent type and its volume, desorption time and adsorption capacity were optimized. Limit of detection (3Sb/m) and limit of quantitation (10Sb/m) were found 0.3 and 1.0 ng mL -1 . Linear dynamic range (LDR), relative standard deviation (RSD) and recovery values were found in the range of 1-30 ng mL -1 , 2.1-2.7 % and 93.5-97.3 %, respectively. Enhancement factor (EF) was found 193. The accuracy of the method was confirmed with standard addition method and analyzing of samples by reference method., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

A newly synthesized xanthate functionalized chlorinated polypropylene (PP-Xa) was used as adsorbent for the orbital shaker based on dispersive solid phase microextraction (OS-DSPME) of caffein from several tea, coffee, energy drink, coca-cola and chocolate samples using UV-vis. spectrophotometer. Synthesized PP-Xa was characterized using Fourier Transform Infrared spectroscopy (FTIR-ATR) and nuclear magnetic resonance spectroscopy ( 1 H NMR). Various parameters like pH, PP-Xa amount, extraction time, type of eluent and its volume were optimized. Linear range, detection limit (LOD), limit of quantification (LOQ), relative standard deviation (RSD), recovery values, and enrichment factor (EF) were found 90-1000 μgL -1 , 27.3 µg L -1 , 90 µg L -1 , 1.9-2.6%, 98 ± 2%, and 167, respectively. Adsorption capacity of PP-Xa was found 271.9 mg g -1 . Standard addition and reference method were used for confirm the accuracy of present method., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Breast cancer is a malignant tumor, which has derived from cells of the breast. Further, a relatively rapid metastasis, and resistance development against all the conventional drug combinations are major clinical issues in breast cancer patients as well as limitations like toxicity, genetic mutation, and metastasis make difficult the use of conventional therapy methods such as chemotherapy, radiotherapy, and local surgery. Therefore, considering the urgent needs, and high death rate in breast cancer cases, the development of new diagnosis and treatment regimens which diagnosed at the early stage and protected normal tissues required for clinical applications. Recently, the combination of tumor diagnosis and treatment within a single platform is a novel perspective, and magnetic nanoparticles are potential candidate owing to their low toxic effect, biocompatibility, biological degradability, superior magnetic properties, and targeting ability to overcome the problems of conventional diagnosis and therapy techniques. Considering these restrictions and requirements, the goal of this research was to investigate the potential of an innovative theranostic agent, which is soybean oil-based polystyrene (PS)-g-soybean oil graft copolymer containing AgNPs (PS-Agsbox) for treatment and MRI-based diagnosis of cancer. Herein, we designed targeted magnetic PS-Agsbox nanoparticles carrying thymoquinone (TQ) that is known for its anticancer potential against breast cancer, and herceptin (HER), which is to bind to the HER2 receptor protein on the surface of HER2-positive tumor cells, and acts by blocking the effects of it. We have successfully demonstrated selective binding, effective uptake of HER-conjugated magnetic PS-Agsbox nanoparticles into MDA-MB-231 (human breast carcinoma cells, a HER2-underexpressing cell line) and SKBR-3 (human breast cancer cells, a HER2-overexpressing breast cancer cell line) cell lines while no effect against L929 (mouse fibroblast cell line). Moreover, the magnetic resonance (MRI) properties of HER-conjugated magnetic PS-Agsbox nanoparticles were also confirmed.

Polystyrene-polyricinoleic acid copolymer containing silver nano particles (AgPSrici) was synthesized and used in separation of molybdenum from different aqueous and foodstuff samples during a dispersive-µ-solid phase extraction approach. The synthesized nano particles were verified using Fourier transform infraredspectroscopy. An electrothermal atomic absorption spectrometry has been used for measurement of the studied ions. AgPSrici amount pH, sample volume, elution solvent kind, and the time of extraction were the effective parameters that were optimized by one-variable-at-one-time method. Analytical data of the method was calculated and limit of detection, relative standard deviation, limit of quantification were 0.022 µg L -1 , 2.9%, 150, and 0.066 µg L -1 , respectively. The synthesized adsorption capacity was obtained 170 mg g -1 .Accuracy of the method was studied by performing the method on certified reference materials and the presence of different interfering ions was studied. Molybdenum content of different water and foodstuffs was determined by the introduced method., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A green and efficient analytical approach was reported for simultaneous preconcentration, and separation of Pb(II) and Cd(II) in water, vegetables, and barbecue samples by dispersive solid-phase microextraction prior to their determination using flame atomic absorption spectrometry. A new poly-3-hydroxy butyrate-polyvinyl triethyl ammonium chloride comb-type amphiphilic cationic block copolymer (PHBvbNCl) was synthesized and characterized. Main variables such as pH, sorbent amount, adsorption time, eluent type, desorption time, and sample volume were optimized. Detection limits and working ranges for Pb(II) and Cd(II) were 0.03 μg L -1 , 0.15 μg L -1 , 0.1-250 μg L -1 and 0.5-375 μg L -1 , respectively. Enhancement factor for Pb (II) and Cd (II) were 114 and 98. The adsorption capacity of PHBvbNCl for Pb(II) and Cd(II) was 175.2 mg g -1 and 152.9 mg g -1 . After the accuracy of the method was confirmed by the analysis of certified reference materials, it was successfully applied to real samples. Finally, the analytical performance of the present method was compared with other methods., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Nosocominal infections associated with biofilm formation on urinary catheters cause serious complications. The aim of this study was to investigate the feasibility of the polyurethane (PU) catheter modified with tetracycline hydrochloride (TCH) attached Ag nanoparticles embedded PolyRicinoleic acid-Polystyrene Nanoparticles (PU-TCH-AgNPs-PRici-PS NPs) and the influence on antimicrobial and antibiofilm activity of urinary catheters infected by Escherichia coli and Staphylococcus aureus . For this purpose, AgNPs embedded PRici graft PS graft copolymers (AgNPs-PRici-g-PS) were synthesized via free radical polymerization and characterized by FTIR, HNMR and DSC. AgNPs-PRici-PS NPs were prepared and optimized by the different parameters and the optimized size of nanoparticle was found as about 150 ± 1 nm. The characterization of the nanoparticles and the morphological evaluation were carried out by FTIR and SEM. Short term stability of nanoparticles was realised at 4°C for 30 days. In vitro release profiles of TCH and Ag NPs were also investigated. The formation of biofilm on PU modified TCH-Ag NPs-PRici-PS NPs, was evaluated and the biocompatibility test of the nanoparticles was realized via the mouse fibroblast (L929) and mouse urinary bladder cells (G/G An1). This is the first time that TCH-AgNPs-PRici-PS NPs used in the modification of PU catheter demonstrated high antimicrobial and antibiofilm activities against the urinary tract infection.

Reconstruction of nerve defects is a clinical challenge. Autologous nerve grafts as the gold standard treatment may result in an incomplete restoration of extremity function. Biosynthetic nerve conduits are studied widely, but still have limitations. Here, we reconstructed a 10 mm sciatic nerve defect in healthy rats and analyzed nerve regeneration in poly (ε-caprolactone) (PCL) conduits longitudinally divided by gold (Au) and gold-cobalt oxide (AuCoO) nanoparticles embedded in poly-propylene poly-ethylene glycol (PPEG) membranes (AuPPEG or AuCoOPPEG) and compared it with unmodified PPEG-membrane and hollow PCL conduits. After 21 days, we detected significantly better axonal outgrowth, together with higher numbers of activated Schwann cells (ATF3-labelled) and higher HSP27 expression, in reconstructed sciatic nerve and in corresponding dorsal root ganglia (DRG) in the AuPPEG and AuCoOPPEG groups; whereas the number of apoptotic Schwann cells (cleaved caspase 3-labelled) was significantly lower. Furthermore, numbers of activated and apoptotic Schwann cells in the regenerative matrix correlated with axonal outgrowth, whereas HSP27 expression in the regenerative matrix and in DRGs did not show any correlation with axonal outgrowth. We conclude that gold and cobalt-oxide nanoparticle modified membranes in conduits improve axonal outgrowth and increase the regenerative performance of conduits after nerve reconstruction.

This work focuses on the synthesis of novel tannin-functionalized polypropylene copolymers that are designed to inhibit the oxidation of vegetable oils for potential use as packaging materials. An empty glass Petri dish (control), a chlorinated polypropylene-coated glass Petri dish (control) and a series of the tannin-functionalized polypropylene coated glass Petri dishes overlaid with linseed oil were exposed to air and additional white light. Oligomerization of the oxidized linseed oil was assessed by measuring the flow properties of the exposed oil using a viscometer. The antioxidant effect of the tannic acid grafted polypropylene copolymers (PP-Tann) retarded oligomerization of the linseed oil. The molar mass of the linoleic acid overlaid onto the PP-Tann films was the lowest among the tested samples after each time period indicating that tannin-grafted polypropylene may be a promising packaging material for vegetable oils., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

We synthesized the poly(methyl methacrylate-co-2-aminoethyl methacrylate (PMaema) amphiphilic copolymer in a form of solid phase adsorbent. Then it was used for separation, preconcentration and determination of trace amount of As(III) ions from foods and waters with hydride generation atomic absorption spectrometry. The PMaema was characterized by fourier transform infrared spectrometer and nuclear magnetic resonance spectrometer. The adsorption of As(III) to the PMaema was also supported using computational chemistry studies. The experimental parameters (pH, PMaema amount, adsorption time and ethanol volume) were optimized using a three-level Box-Behnken design with four experimental factors. We observed linear calibration curve for the PMaema amount in the 10-500 ng L -1 range (R 2  = 0.9956). Limit of detection, preconcentration factor and sorbent capacity of PMaema were equal to 3.3 ng L -1 , 100 and 75.8 mg g -1 , respectively. The average recoveries (spiked at 50 ng L -1 ) changes in the range of 91.5-98.6% with acceptable relative standard deviation less than 4.3%. After validation studies, the method was successfully applied for separation, preconcentration and determination of trace amount of As(III) from foods and waters.

The aim of this study is to extract zinc and manganese from foods and vegetables using an amphiphilic copolymer adsorbent, poly(styrene)-co-2-vinylpyridine which was synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization from styrene and 2-vinyl pyridine in the presence of a trithiocarbonate and 2,2'-azo-bis isobutyro nitrile (AIBN) in toluene solution under argon at 80 °C. Fourier Transform Infrared (FTIR) and proton nuclear magnetic resonance ( 1 H NMR) spectroscopy were used in the characterization of the obtained copolymer. Under the optimum conditions, several validation variables such as uncertainty measurement, selectivity, robustness, precisions, matrix effects and accuracy were investigated. Taking an adsorption time of 15 min, detection limits of 0.04 μg L -1 and 0.2 μg L -1 and 7.9 μg L -1 and enrichment factors of 145 and 110 were obtained for Mn(II) and Zn(II), respectively.The method was successfully applied to the analysis of Mn(II) and Zn(II) in foods and vegetables., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The current research article was reported the synthesis of a novel poly(3-hydroxy butyrate)-b-poly(vinyl benzyl xanthate) block copolymer (PHB-Xa) for vortex-assisted solid-phase microextraction of cobalt(II) and nickel(II) from canned foodstuffs prior to their determinations by flame atomic absorption spectrometry. The block copolymer was synthesized and characterized by nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. Experimental variables affecting the extraction efficiency of the copolymer were optimized. Since the PHB-Xa block copolymers have a high π conjugate structure and hydrophobicity, the use of this adsorbent yielded quantitative results for the extraction of Ni(II) and Co(II). After optimization, the linearities for Ni(II) and Co(II) were 0.05-80 ng mL -1 and 0.2-100 ng mL -1 , respectively. The limits of detection and the limits of quantification were in the range of 0.015-0.06 ng mL -1 and 0.05-0.2 ng mL -1 , respectively. The method was successfully applied to determination of Ni(II) and Co(II) in canned foodstuffs prepared by microwave digestion., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Among many different types of fabricated nanoparticles, magnetic iron oxide nanoparticles (MNPs) have unique physical and chemical properties and have been widely used due to theirs enhanced permeability and retention effect for biomedical applications. The incorporated theranostic MNPs into biopolymer coatings are currently particular interest to investigators in the fields of nanobiomedicine because of efficiently delivering of various drugs, genes and providing imaging properties. Hepatocellular carcinoma (HCC) is the most prevalent reason of cancer-related deaths, makes it one of the worst malignant tumors in the world. Because, there is a lack of effective treatment methods for HCC, aforementioned magnetic carrier technology with recent innovations could be a promising tool in HCC diagnosis and treatment. Therefore, this study proposes a novel fatty-acid-based polymeric magnetic nanoprobe for diagnosis of hepatocellular tumors using polyethylene glycol (PEG)-terminated polystyrene (PS)-linoleic copolymer coated magnetic iron oxide nanoparticles. MNPs were synthesized by a co-precipitation method and were subsequently coated with a copolymer containing PEG group as termini. Fifty-nanometer-sized MNPs were incorporated into the core of PLinaS-g-PEG nanoparticles. The morphology and size distribution of the bare and magnetic PLinaS-g-PEG were determined by transmission electron microscopy (TEM), and dynamic light scattering (DLS), respectively. MTT and flow cytometry assays showed that PLinaS-g-PEG MNPs demonstrated ultrasentive apoptotic behavior against cancerous cell line, i.e. HepG2 in the culture plate when the fatty acid-containing polymer coated MNPs showed no adverse effect on L929 cell growth. The localization, and accumulation in hepatocytes of PLinaS-g-PEG MNPs without specific targeting ligand was confirmed by fluorescence and confocal microscopy. Therefore, PLinaS-g-PEG MNPs may be potentially used as a unique candidate for diagnosis of hepatocellular carcinomas.

In this study, the anticancer activities of two siRNA carriers were compared using a human lung adenocarcinoma epithelial cell line (A549). Firstly, poly(styrene)-graft-poly(linoleic acid) (PS- g -PLina) and poly(styrene)-graft-poly(linoleic acid)-graft-poly(ethylene glycol) (PS- g -PLina- g -PEG) graft copolymers were synthesized by free-radical polymerization. PS-PLina and PS-PLina-PEG nanoparticles (NPs) were prepared by solvent evaporation method and were then characterized. The size was found as 150 ± 10 nm for PS-PLina and 184 ± 6 nm for PS-PLina-PEG NPs. The NPs were functionalized with poly(l-lysine) (PLL) for c-myc siRNA conjugation. siRNA entrapment efficiencies were found in the range of 4-63% for PS-PLina-PLL and 6-42% for PS-PLina-PEG-PLL NPs. The short-term stability test was realised for 1 month. siRNA release profiles were also investigated. In vitro anticancer activity of siRNA-NPs was determined by MTT, flow cytometry, and fluorescence microscopy analyses. Obtained findings showed that both NPs systems were promising as siRNA delivery tool for lung cancer therapy.

A newly synthesized polystyrene-g-polyoleic acid-g-polyethylene glycol graft copolymer (PoleS-PEG) was used as adsorbent in the solid phase microextraction of selenium ions by using electrothermal atomic absorption spectrometry (ETAAS). Neodymium magnet was used for separation of analyte ions. Various analytical parameters such as pH, adsorbent amount, mixing time, eluent solution, sample volume, etc. were optimized. The matrix effects of some cations and anions were also studied. The capacity of the adsorbent was found 11.5 mg g -1 . The preconcentration factor was found to be 50. The detection limit (LOD) and quantification limit (LOQ) were found 6.06 ng L -1 and 20 ng L -1 , respectively. The calibration curve was linear in the range of 0.02-4.0 μg L -1 . Relative standard deviation was found 3.2%. The accuracy of the method was provided by using standard reference materials. The optimized method was successfully applied to natural water and food samples., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A simple, rapid and sensitive solid phase microextraction method was used for the speciation of inorganic antimony (Sb) by using a novel synthesized polymeric material in micropipette tip of syringe system. In present methodology, the specie of Sb (III) made hydrophobic complex with diethyl dithiocarbamate (DDTC) at pH 5.5 and subsequently adsorbed on polystyrene oleic acid imidazole polymer (POIP), whereas Sb(V) did not made complex and adsorbed on the polymer, remained in aqueous solutions. The strategy of multivariate was carried out to screen out the different variables and assessed the optimum values of their experimental values for the extraction efficiency of analyte. Then the analyte was sorbed on the polymer in micropipette tip of syringe system was quantitatively eluted by different types of acids at different levels for 2-6 aspirating/dispensing cycles. The extracted Sb(III) ions with modifiers were directed into the graphite furnace atomic absorption spectrometry for analysis. The limit of detection (LOD), limit of quantification (LOQ) and preconcentration factor (PF) for Sb(III) was found to be 6 ng L -1 , 20 ng L -1 and 100. The RSD value was found to be 4.2%. The standard addition method and certified reference materials were checked for accuracy and validity of method. The developed method was effectively applied for the determination of total and inorganic species of Sb(III) and Sb(V) in different types of water samples, whereas only total Sb was determined in acid digested soil, Tuna fish, rice, spinach, black tea, mixed fruit juice and ice tea samples., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Objective: In the treatment of pilonidal sinus disease different approaches are used such as conservative treatment and fasciocutaneous rotation flap. The aim of this study was to evaluate the efficacy of "de-epithelialization technique" as a new approach in pilonidal sinus disease treatment., Material and Methods: Forty pilonidal sinus disease patients treated with de-epithelialization method were evaluated retrospectively. Patient age, gender, body mass index, wound healing time, visual analog scale scores, operation times, hospital stay duration, drain removal time, cosmetic satisfaction rates, complications, and recurrence rates were evaluated., Results: The numbers of male and female patients in this study were 39 and 1, respectively. The median age of the patients was 25 years and the mean BMI was 26.6. The mean operating time was 43 min, and all patients were discharged 5 h after the operation. Wound healing time varied from 10 to 20 days. Median follow-up period was 9 months (4-17 months). One patient with high body mass index suffered from partial wound separation. No other complications such as infections and fluid collections (hematoma and seromas) were observed. Maximum cosmetic satisfaction rate was 90% (n=36), and no patient had a recurrence during the follow-up period., Conclusion: "De-epithelialization" may be considered as a complementary and/or alternative approach to other surgical techniques such as primary closure, rhomboid excision, and Limberg flap in the treatment of pilonidal sinus disease, with acceptable cosmesis and recurrence rates., Competing Interests: Conflict of Interest: No conflict of interest was declared by the authors.

Antisense oligonucleotide (ASO)-conjugated-α-tocopherol succinate (TCS)-loaded-poly(lactic acid)-g-poly(ethylene glycol) nanoparticles (ASO-TCS-PLA-PEG NPs), with the ratio of polymer/TCS of 10:2.5, 10:5, 10:7 (w/w) were prepared for targeting cancer therapy. The amphiphilic PLA, amino terminated PEG graft copolymers were synthesized by ring opening polymerization reaction. Nanoparticles were produced by using double emulsion (w/o/w) solvent evaporation method. ASO-TCS-PLA-PEG NPs demonstrated satisfactory encapsulation and loading efficiency and size distribution. The short-term stability studies were carried out at 4 and 25 °C for 30 days to assess their mean particle size, polydispersity index and zeta potential. The cellular uptake and extended cytoplasmic retention of the NPs in A549 human lung carcinoma and L929 mouse fibroblast cells were examined by fluorescence and confocal microscopy. In human lung cancer cells, ASO-TCS-PLA-PEG NPs exhibited better cellular internalization, cytotoxicity and apoptotic and necrotic effects compared to healthy cell line, L929. These findings showed that ASO-modified nanoparticles could serve as a promising nanocarrier for targeted tumor cells.

This study describes construction of an enzymatic fuel cell comprised of poly(caprolactone-g-ethylene glycol) coated novel glucose oxidase anode and laccase cathode. Rationally designed poly(caprolactone-g-ethylene glycol) containing various poly(ethylene glycol) percentages ranging between 2.67 and 15.04% were synthesized chemically and tested separately for operation of the fuel cell system to achieve the best energy generation. The maximum power density was found to be 80.55μWcm -2 at 0.91V (vs. Ag/AgCl) in pH5, 100mM citrate buffer (20°C) by the addition of 30mM of glucose from the electrodes coated with 11.34% poly(ethylene glycol) containing polymer with a quantity of 600μg. High poly(ethylene glycol) percentages with more numbers of long poly(ethylene glycol) brushes lead to the creation of a complexity in the polymer morphology and steric hindrance effect for electron transport. The graft copolymer was easily used for the fuel cell system owing to its biocompatible and microporous film morphology. The grafted polymer was able to facilitate enzymatic glucose oxidation and oxygen reduction while simultaneously producing high catalytic electrical currents., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Autoxidation of poly unsaturated fatty acids makes negative effect on foods. In this work, this negative effect was turned to a great advantage using autoxidized soybean oil as a macroperoxide nanocomposite initiator containing silver nano particles in free radical polymerization of vinyl monomers. The synthesis of soybean oil macro peroxide was carried out by exposing soybean oil to air oxygen with the presence of silver nanoparticles (Ag NPs) at room temperature. Autoxidized soybean oil macroperoxide containing silver nanoparticles (Agsbox) successfully initiated the free radical polymerization of styrene in order to obtain Polystyrene (PS)-g-soybean oil graft copolymer containing Ag NPs. Both autoxidized soybean oil and PS-g-sbox with Ag NPs showed a surface plasmon resonance and high fluorescence emission. Overall rate constant (K) of styrene polymerization initiated by autoxidized soybean oil macroperoxide with Ag NPs was found to be K=1.95.10 -4 Lmol -1 s -1 at 95°C. Antibacterial efficiency was observed in the PS-g-soybean oil graft copolymer film samples containing Ag NPs. 1 H NMR and GPC techniques were used for the structural analysis of the fractionated polymeric oils., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Infection is a serious complication after nasal packing that otolaryngologists seek to avoid. The aim of this study is to investigate the use of silver (Ag) nanoparticle, which serves as antimicrobial agents, with nasal tampons. The study design is an experimental animal model and the setting is tertiary referral center. Twenty-four rats were randomized into the following four groups: (1) control group (n = 6); (2) silicone nasal splint (SNS) group (n  =  6); (3) polypropylene-grafted polyethylene glycol (PP-g-PEG) amphiphilic graft copolymer-coated SNS group (n  =  6); and (4) Ag nanoparticle-embedded PP-g-PEG (Ag-PP-g-PEG) amphiphilic graft copolymer-coated SNS group (n  =  6). These tampons were applied to rats for 48 h, after which they were removed in a sterile manner, and the rats were sacrificed. The nasal septa of the rats were excised, and assessments of tissue changes in the nasal mucosa were compared among the groups. The removed tampons were microbiologically examined, and quantitative analyses were made. When the groups were compared microbiologically, there were no significant differences in bacterial colonization rates of coagulase-negative Staphylococcus spp. among the three groups (p = 0.519), but there was a statistically significant difference among bacterial colonization rates of Heamophilus parainfluenzae and Corynebacterium spp. (p = 0.018, p = 0.004). We found that H. parainfluenzae grew less robustly in the Ag-PP-g-PEG than the PP-g-PEG group (p = 0.017). However, we found no significant difference between the Ag-PP-g-PEG and SNS groups, or between the SNS and PP-g-PEG groups. The growth of Corynebacterium spp. did not differ significantly between the Ag-PP-g-PEG and SNS groups (p = 1.000). When Group 4 was compared with Group 2, the former showed less inflammation. Compared with other tampons, Ag-PP-g-PEG amphiphilic graft copolymer-coated silicone nasal tampons caused less microbiological colonization and inflammation. Therefore, the use of these tampons may prevent secondary infections and reduce the risk of developing complications by minimizing tissue damage.

Amphiphilic poly(3-hydroxylalkanoate) (PHA) copolymers find interesting applications in drug delivery. The aim of this study was to prepare nucleic acid adsorbed on (PHB-b-PEG-NH 2 ) nanoparticle platform for gene delivery. For this purpose, PHB-b-PEG-NH 2 block copolymers were synthesized via transesterification reactions. The copolymers obtained were characterized by Proton Nuclear Magnetic Resonance ( 1 H-NMR), Fourier Transform Infrared Spectrometer (FTIR), Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) techniques. The cytotoxic, apoptotic and necrotic effects of these nanoparticles in the MDA 231 human breast cancer cell, the A549 human lung cancer cell and the L929 fibroblast cell lines were also investigated.

The polymer, polystyrene polydimethyl siloxane was loaded into the micropipette tip of the syringe system as an adsorbent to developed miniaturized solid phase microextraction. Standard solutions of arsenate and arsenite were passed through the adsorbent loaded in micropipette tip to check the adsorption behaviors. It was observed that arsenate adsorbed on the polystyrene polydimethyl siloxane in the pH rang of 6-8, while arsenite was directly passed through the micropipette tip of syringe system. The adsorbed arsenate in micropipette tip of syringe system were eluted by 1.0M hydrochloric acid. The total inorganic arsenic contents were obtained by the addition of oxidizing agent potassium permanganate into the studied samples before passing to the micropipette tip of syringe system. Arsenite concentration in water samples were measured by subtracting arsenate from total inorganic arsenic concentration. Different characteristics which effect the determination of arsenate specie like amount of adsorbent, adsorption capacity, pH, pulled and pushed cycles for adsorption and desorption, volume of sample, eluent type and it volume were also studied in detail. Enrichment factor and detection limit of arsenate by desired method were 218 and 6.9ngL -1 respectively. The relative standard deviation was 4.1% (n=10, C=0.12µgL -1 ). Accuracy of the desired technique was confirmed by analysis of the CRMs (Lake Ontario Water TM-28.3 and Riverine Water NRCC-SLRS-4). Desired technique was significantly useful for determination of the total arsenic, arsenate, and arsenite contents in different natural water samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Objective: The aim of the present study was to evaluate the mechanical and thermal characteristics of two denture base acrylic resins containing silver nanoparticles (AgNPs)., Material and Methods: Two different acrylic denture base resins (heat-polymerized and microwave polymerized) containing 0.3, 0.8 and 1.6 wt% AgNPs were evaluated for flexural strength, elastic modulus and impact strength. The glass transition temperature (Tg) and relative heat capacity (Cp) of the samples were determined from the Differential Scanning Calorimetry (DSC) results. For statistical analysis, two-way ANOVA and Tukey-HSD tests were performed., Results: Addition of 0.8% and 1.6% AgNPs in microwave-polymerized resin significantly decreased the transverse strength and elastic modulus. In terms of impact strength, the addition of AgNPs has no effect on both resin groups. Glass transition temperature (Tg) was decreased with the addition of AgNPs for both denture base resins., Conclusions: The incorporation of AgNPs, generally used for antimicrobial efficiency, affected the transverse strength of the denture base acrylic resins depending on the concentration of nanoparticles. Tg was decreased with the addition of AgNPs for both denture base resins.

A new biodegradable polyhydroxybutyrate diethanol amine (PHB-DEA) polymer was used as adsorbent for the sensitive and selective separation, preconcentration and determination of Pb(II), Cd(II) and Zn(II) by using atomic absorption spectrometry. Diethyl dithiocarbamate was used as chelating reagent. Analytical parameters such as pH, eluent type and its volume, flow rates of sample solution, ligand amount, sample volume were optimized. Effects of some cations, anions and transition metal ions were also investigated. Enrichment factor and relative standard deviation were found to be 100 and 3%, respectively. The limits of detection based on three times standard deviation of blanks (N=21) were found 1.05μgL(-1) for Pb(II), 0.42μgL(-1) for Cd(II) and 0.13μgL(-1) for Zn(II). Limits of quantification (10s, N=21) were found 3.47μgL(-1) for Pb(II), 1.39μgL(-1) for Cd(II) and 0.43μgL(-1) for Zn(II). Accuracy evaluation of the method was confirmed with analyses of certified reference materials (NIST SRM 1515 Apple leaves, IAEA 336 Lichen, GBW 07605 Tea). Optimized method was applied to tap water and food samples after microwave digestion method. Cadmium and lead values in some samples were found higher than legal limits., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The aim of this study was to evaluate therapeutic potential of curcumin-loaded poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) PHBHHx nanoparticles (CUR-NPs) and concanavaline A conjugated curcumin-loaded NPs (ConA-CUR-NPs) for breast cancer treatment. The size and zeta potential of prepared NPs were about 228 ± 5 nm and -23.3 mV, respectively. The entrapment efficiencies of polymer/drug weight ratios, 1.25CUR-NPs, 2.5CUR-NPs, 5CUR-NPs, ConA-1.25CUR-NPs, ConA-2.5CUR-NPs and ConA-5CUR-NPs were found to be ≈68, 55, 45, 70, 60 and 51%, respectively. Optimized NPs formulations in the freeze-dried form were assessed with their short-term stability for 30 days of storage at 4 °C and 25 °C. Anticancer activity of ConA-CUR-NPs was proved by MTT assay and reconfirmed by double staining and flow cytometry results. The anticancer activity of ConA-CUR-NPs was measured in human breast cancer cells (MDA-MB 231) in vitro, and the results revealed that the ConA-CUR-NPs had better tumor cells decline activity.

Study Design: Antimicrobial effect of a novel silver-impregnated pedicle screw in rabbits., Objective: A novel spine implant model was designed to study the antimicrobial effect of a modified Titanium (Ti) pedicle screws with methicillin-resistant Staphylococcus aureus (MRSA) in multiple surgical sites in the lumbar spine of a rabbit., Summary of Background Data: Infection in spinal implant is of great concern. Anti-infection strategies must be tested in relevant animal models that will lead to appropriate clinical studies., Methods: Fourteen New Zealand white rabbits were divided into 2 groups: group 1: infected unmodified Ti screw group (n =  6), and group 2: infected polyethylene glycol grafted, polypropylene-based silver nanoparticle (PP-g-PEG-Ag) covered Ti screw group (n = 6), and 2 rabbits as sterile (sham-operated and control) group. In all groups, left L4-right L6 vertebra levels were exposed and screws were drilled to transverse processes after contamination of burr holes and surrounding tissue with 0.1 mL of 10 colony forming units (CFU) MRSA solutions in groups 1 and 2. After 21 days, samples were collected and infection was analyzed via light and scanning electron microscopy and culturing. Silver nanoparticles (Ag-NP) on the screws and tissues were assayed pre and postoperatively., Results: The bacterial colony count for modified-Ti screw group was lower than for unmodified Ti screw (17.2 versus 200 x 10(3) CFU/mL, P = 0.029) with less biofilm formation. There was no difference in duration of surgery among groups and within the surgical sites. Ag-NPs were detected on the screw surface postoperatively., Conclusion: This novel experimental design of implantation in rabbits is easy to apply and resembles human stabilization technique. Modified Ti screws were shown to have antimicrobial effect especially inhibiting the biofilm formation. This anchored Ag NPs that remained after 21st day of implantation shows that it is resistant to tapping forces of the screw.

Purpose: Tumors of central nervous system (CNS) are accounted as the second most common tumors in childhood (21% of all cancers) following hematologic malignancies. The patients can suffer more than one cancer in their lifetime, and radiotherapy is claimed for de novo formation of a new tumor in years after treatment of an initial tumor., Methods: We have retrospectively analyzed our database for defining radiotherapy-related de novo brain tumors operated in between January, 2000 and August, 2012. New tumors in the field of radiotherapy were included into the study., Results: The retrospective analysis revealed six patients (two girls and four boys) eligible for further evaluation. The children were irradiated at an age in the range of 5 and 12 years (mean, 7.8). The primary diagnoses were hematological malignancies in two (acute lymphocytic leukemia and non-Hodgkin lymphoma (NHL)) and solid tumors in other four (two pilocytic astrocytoma, one craniopharyngioma, and one grade 3 astrocytoma). All patients received cranial radiotherapy. The mean latency period for the "second tumor" was 9.5 years. The pathological diagnoses for de novo new tumors were as follows: glial tumor (two cases), medulloblastoma (two cases), mesenchymal tumor (one case), and meningeal sarcoma (one case). All de novo tumors were high graded. Mean survival was 14.6 months., Conclusions: de novo brain tumors after irradiation has poor prognosis in neurosurgical practice. Vigilance and awareness for possibility of de novo new tumor are warranted for both families and physicians at follow-ups even years after the treatment of initial tumors.

This study describes the construction of an enzymatic fuel cell comprised of novel gold nanoparticles embedded poly(propylene-co-imidazole) coated anode and cathode. Working electrode fabrication steps and operational conditions for the fuel cell have been optimized to get enhanced power output. Electrical generation capacity of the optimized cell was tested by using the municipal wastewater sample. The enzymatic fuel cell system reached to maximum power density with 1 μg and 8 μg of polymer quantity and bilirubin oxidase on electrode surface, respectively. The maximum power output was calculated to be 5 μW cm(-2) at +0.56 V (vs. Ag/AgCl) in phosphate buffer (pH7.4, 100mM, 20°C) by the addition of 15 mM of glucose as a fuel source. The optimized enzymatic fuel cell generated a power density of 0.46 μW cm(-2) for the municipal wastewater sample. Poly(propylene-co-imidazole) was easily used for a fuel cell system owing to its metallic nanoparticle content. The developed fuel cell will play a significant role for energy conversion by using glucose readily found in wastewater and in vivo mediums., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Newly synthesized gold and cobalt oxide nanoparticle embedded Polypropylene-g-Polyethylene glycol was used for a compartment-less enzymatic fuel cell. Glucose oxidase and bilirubin oxidase were selected as anodic and cathodic enzymes, respectively. Electrode fabrication and EFC operation parameters were optimized to achieve high power output. Maximum power density of 23.5 µW cm(-2) was generated at a cell voltage of +560 mV vs Ag/AgCl, in 100mM PBS pH 7.4 with the addition of 20mM of synthetic glucose solution. 20 µg of polymer amount with 185 µg of glucose oxidase and 356 µg of bilirubin oxidase was sufficient to get maximum performance. The working electrodes could harvest glucose, produced during photosynthesis reaction of Carpobrotus Acinaciformis plant, and readily found in real domestic wastewater of Zonguldak City in Turkey., (Copyright © 2014 Elsevier B.V. All rights reserved.)