Search

We have demonstrated non-polar GaN power diodes (Schottky barrier diode and p–n junction diode) on foreign substrates featuring the true-lateral p–n and metal–semiconductor junctions. The diodes were fabricated on GaN islands laterally overgrown on the mask-patterned sapphire and Si substrates by metalorganic vapor phase epitaxy. The anode and cathode were formed on the opposed a-plane sidewalls of the island, making the device architecture essentially like the 90° rotation of the desired true-vertical power diodes. The ideality factor of the Schottky barrier diode remained 1.0 (from 1.00 to 1.05) over 7 decades in current. Specifically, a high critical electric field of 3.3 MV/cm was demonstrated on the p–n junction diode with avalanche capability. These performances reveal a strong potential of non-polar GaN with the true-lateral junctions for high power applications.

We demonstrate high, up to 30% In content InGaN sub-micrometer platelets on GaN by metalorganic vapor phase epitaxy. These InGaN platelets were selectively grown on flat GaN seeds formed in sub-micrometer-scale openings in a SiNx mask. The platelets were highly uniform without any dislocations or pits, with an atomically flat (0001) surface. The typical height was ∼120 nm, which significantly exceeded the normal critical layer thickness of a c-plane InGaN film. The strain state was comprehensively characterized by microbeam x-ray diffraction and transmission electron microscopy. Due to a gradual elastic relaxation of strain, the In content increased almost linearly from bottom to top because of the strong strain-dependent In incorporation. These platelets can serve as high-quality strain-relaxed templates for long wavelength micro-light-emitting diodes. [ABSTRACT FROM AUTHOR]

In this work, a deliberate etching-based top-down approach is proposed to fabricate the GaN nanorod (NR) Schottky barrier diode (SBD). As a key step during the fabrication, the impact of the wet-etching process on device performance is systematically studied. By virtue of the reduced surface states at the sidewall, the performance of NR SBD with the wet-etching process is substantially improved, delivering a forward turn-on voltage of 0.65 V, a current density of ∼10 kA/cm2 at 3 V, an ideality factor of 1.03, an ON/OFF current ratio of ∼1010, and no severe current collapse, along with a reverse breakdown voltage of 772 V. [ABSTRACT FROM AUTHOR]

An optimized top-down approach was utilized to fabricate vertical GaN-on-GaN nanowire Schottky barrier diodes (NWSBDs) in this letter. The suppressed reverse leakage current and enhanced breakdown voltage (BV) of the vertical GaN NWSBDs are attributed to the reduced electric field at the interface of the Schottky junction achieved through the dielectric reduced surface field technique. As-fabricated NWSBD delivers a low turn-on voltage of 0.80 V, a near-unity ideality factor of 1.04, along with a soft BV of 480 V. The measured soft BV is comparable with the avalanche BV of the p–n diode with a similar net doping concentration in the drift region. [ABSTRACT FROM AUTHOR]

An approach to simultaneously grow independent core‐shell structures emitting at different wavelengths by selective area epitaxy is presented. By using seeds of different sizes, the monolithic integration of various GaN crystals including elongated nano‐rods (NRs), micro‐platelets (MPs), and a range of pyramid‐like structures are demonstrated. Dominant non‐polar sidewalls cover more than 75% of the surface area of the NRs, while the polar top facet are about 80% of the total surface of the MPs. InGaN/GaN quantum wells (QWs) deposited on these structures exhibit independent and well‐separated emissions in the green–blue and orange–red ranges, respectively. The pyramid‐like structures at intermediate seed sizes are more complex with semi‐polar facets nearly totaling 60% of the total surface area, resulting in yellow luminescence strongly broadened by the nearby facets contributions. These results suggest the total surface area of each facets and the resulting optical properties of the crystals can be tailored by adjusting the size of the seeds. However, further improvements are required to locally enhance the vertical, pyramidal, and lateral growth of the GaN cores and increase the spectral purity of the different QWs. The approach presented is of interest to design multi‐wavelength devices which requires independent subpixels of high color purity. An approach to simultaneously grow independent core‐shell structures emitting at different wavelengths by selective area epitaxy is presented. By using seeds of different sizes, the monolithic integration of various GaN crystals including elongated nano‐rods, micro‐platelets, and pyramid‐like structures are demonstrated. InGaN/GaN quantum wells deposited on these structures exhibit independent and well‐separated emissions in the green–blue and orange–red ranges, respectively. [ABSTRACT FROM AUTHOR]