Search

In this work, we manifest that the epitaxial structure for p-GaN gate high-electron-mobility transistor is a versatile platform to develop electronics for operating in an extremely wide temperature range (X-WTR) from 2 to 675 K, with comprehensive X-WTR studies on device operation and circuit behaviors. The key enabler for the high-temperature operation is the wide bandgap that substantially suppresses the thermal excitation of the intrinsic carrier. However, for the low-temperature side, the two-dimensional electron and hole gas (2DEG and 2DHG) channels at the heterojunctions are formed by the temperature-insensitive polarization fields, which free the carriers from freezing out. The monolithically integrated GaN n-FET, p-FET, and the resultant complementary circuits are, therefore, shown to operate in X-WTR. [ABSTRACT FROM AUTHOR]

The p-GaN/AlGaN/GaN heterostructure, predominantly epitaxially grown on large-scale silicon wafers, has been widely used for producing consumer power switching devices and recently manifested favorable for developing GaN-based complementary devices and circuits. This work investigates the hole distribution and transport in this structure based on wide-temperature-range (20–600 K) Hall measurements and TCAD simulations. It is revealed that the p-channel thereof is composed of the bulk holes in the p-GaN and the two-dimensional hole gas (2DHG) at the p-GaN/AlGaN interface, and both substantially contribute to the lateral p-type conduction at room temperature. Their complementary temperature responses lead to conductivity enhancement at both high- and low-temperature regimes. The high-density (1.2 × 1013 cm−2) 2DHG is formed owing to the polarization-induced potential well and the ionization of the Mg acceptors that thermally diffused into the barrier during the epi-growth. Such ionized Mg acceptors would partially deplete the two-dimensional electron gas (2DEG) at the access region in the n-channel side where the p-GaN is removed and result in a trade-off between the carrier density of 2DHG and 2DEG. [ABSTRACT FROM AUTHOR]

Hot electrons with high kinetic energy could be generated in the channel of GaN high-electron-mobility transistors (HEMTs) during hard switching operation. Those “lucky” hot electrons scattered to the vulnerable interface between the passivation and barrier layers could bombard the interface region and create new defects that would lead to degradation of the dynamic on-resistance (${R}_{ON}$) after long-term operations. In this work, we propose a solution to the hot-electron induced device degradation through channel engineering, i.e., deploying a double-channel structure in place of the conventional single-channel structure in ${p}$ -GaN gate HEMTs. It is revealed that hot electrons are mostly generated in the lower channel and thus the additional scattering interface can effectively deter the hot electrons from reaching the vulnerable surface. Dynamic ${R}_{ON}$ degradation induced by long-term stresses at “semi-on” states is shown to be substantially suppressed in the ${p}$ -GaN gate HEMT with the double-channel structure. [ABSTRACT FROM AUTHOR]

GaN ${p}$ -channel field-effect transistors (${p}$ -FETs) are essential components for implementing the energy-efficient complementary logic circuitry for monolithic GaN power integration. This letter reports the threshold voltage (${V}_{\mathrm {TH}}$) instability of ${p}$ -channel GaN MOSFETs with Al2O3 as the gate dielectric. When the gate-to-source bias sweeps toward the negative direction, the ${V}_{\mathrm {TH}}$ exhibits a shift toward more negative values. The impacts of such ${V}_{\mathrm {TH}}$ instability on GaN complementary logic circuits are characterized using logic inverters and ring oscillators. It is shown that impacts on circuit functions are limited with an operating voltage swing below 5 V. However, the propagation delay could be gradually prolonged, as a result of the drifting ${V}_{\mathrm {TH}}$. [ABSTRACT FROM AUTHOR]

In this work, the impact ionization-induced OFF-state breakdown is revealed and systematically investigated in 100 V Schottky-type p-GaN gate high-electron-mobility transistors. Impact ionization is found to occur in the peak electric-field region at the source-terminated field-plate edge and is initiated by electrons injected from the source-side two-dimensional electron gas channel through the buffer layer. Hot electrons generated from impact ionization, when being captured by surface traps, could lead to redistribution and peak value reduction of electric-field. Consequently, the sudden rise in the OFF-state leakage current by impact ionization could be self-clamped temporally to avoid catastrophic rupture of the device. The impact ionization is further verified by the increase in dynamic OFF-state leakage current and a negative shift in threshold voltage, both of which result from positively charged holes (generated from impact ionization) drifting toward the gated channel. [ABSTRACT FROM AUTHOR]