Search

Interfacial engineering of perovskite films has been the main strategies in improving the efficiency and stability of perovskite solar cells (PSCs). In this study, three new donor‐acceptor (D–A)‐type interfacial dipole (DAID) molecules with hole‐transporting and different anchoring units are designed and employed in PSCs. The formation of interface dipoles by the DAID molecules on the perovskite film can efficiently modulate the energy level alignment, improve charge extraction, and reduce non‐radiative recombination. Among the three DAID molecules, TPA‐BAM with amide group exhibits the best chemical and optoelectrical properties, achieving a champion PCE of 25.29 % with the enhanced open‐circuit voltage of 1.174 V and fill factor of 84.34 %, due to the reduced defect density and improved interfacial hole extraction. Meanwhile, the operational stability of the unencapsulated device has been significantly improved. Our study provides a prospect for rationalized screening of interfacial dipole materials for efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

In the pursuit of highly efficient perovskite solar cells, spiro‐OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self‐polymerized spiro‐type interfacial molecule, termed v‐spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro‐OMeTAD. Importantly, the vinyl groups in v‐spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly‐v‐spiro‐based device achieves an outstanding efficiency of 24.54 %, with an enhanced open‐circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long‐term stability in PSCs through innovative interfacial design. [ABSTRACT FROM AUTHOR]

In the closed-loop supply chain, many suppliers opt for self-recycling or entrust retailers to recycle. Under both recycling channels, the member responsible for recycling can undertake or outsource logistics services. This paper investigates how consumers' environmental awareness and recycling cost-saving affect the optimal combination of recycling channel and logistics-service strategy. To this end, we mathematically formulate the supplier-led Stackelberg game theoretical-framework, and apply the Karush–Kuhn–Tucker conditions for constrained optimization. We examine the optimal combination under the impact of consumers' environmental awareness and recycling cost-saving on profits, environmental impact and social welfare, using numerical analysis. Results demonstrate that as consumers' environmental awareness and recycling cost-saving remain at a higher level, the supplier and retailer will both achieve maximum profits when the supplier entrusts the retailer to recycle and the retailer undertakes the logistics services. Meanwhile, the third party will choose to be entrusted with services by the supplier, rather than the retailer. To improve supply-chain performance, the retailer should assume social responsibility to recycle and build the logistics-service system. [ABSTRACT FROM AUTHOR]

Objective: Little is known about the relationship of telomere length among leukocyte subsets and cells up the hematopoietic hierarchy. This information is relevant because telomere dynamics in granulocytes were postulated to mirror those of hematopoietic stem cells (HSCs). Materials and Methods: In newborn umbilical cord blood (UCB), we examined the relationships of telomere length in hematopoietic progenitor cells (HPCs) (CD34+CD45−) with those in T lymphocytes and granulocytes. In addition, we correlated telomere length in granulocytes with those in whole leukocyte samples of individuals ranging in age from birth to 100 years. Results: In the UCB, we found strong correlations of telomere length in HPCs with telomere length in T lymphocytes (r ranging from 0.882 to 0.935; p ranging from 0.0038 to 0.0007) and in granulocytes (r = 0.930; p = 0.0072). At birth, strong correlations were also observed between telomere length in granulocytes and those in all leukocytes (r = 0.979; p = 0.0003). Throughout the human lifespan, the relationship between telomere length in granulocytes and that in all leukocytes was r > 0.980 and p < 0.0001. Conclusions: Robust synchrony exists among leukocyte subsets throughout the human lifespan; individuals with relatively long (or short) telomeres in one leukocyte subset have long (or short) telomeres in other leukocyte subsets. Moreover, telomere length in leukocytes reflects its length in cells up the hematopoietic hierarchy, i.e., HPCs and, by inference, HSCs. Strong links have been found by many studies between leukocyte telomere length and a host of aging-related diseases. Our findings suggest, therefore, that these links might be traced to telomere dynamics in HSCs. [Copyright &y& Elsevier]

Interfacial engineering of perovskite films has been the main strategies in improving the efficiency and stability of perovskite solar cells (PSCs). In this study, three new donor-acceptor (D-A)-type interfacial dipole (DAID) molecules with hole-transporting and different anchoring units are designed and employed in PSCs. The formation of interface dipoles by the DAID molecules on the perovskite film can efficiently modulate the energy level alignment, improve charge extraction, and reduce non-radiative recombination. Among the three DAID molecules, TPA-BAM with amide group exhibits the best chemical and optoelectrical properties, achieving a champion PCE of 25.29 % with the enhanced open-circuit voltage of 1.174 V and fill factor of 84.34 %, due to the reduced defect density and improved interfacial hole extraction. Meanwhile, the operational stability of the unencapsulated device has been significantly improved. Our study provides a prospect for rationalized screening of interfacial dipole materials for efficient and stable PSCs., (© 2024 Wiley-VCH GmbH.)

In the pursuit of highly efficient perovskite solar cells, spiro-OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self-polymerized spiro-type interfacial molecule, termed v-spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro-OMeTAD. Importantly, the vinyl groups in v-spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly-v-spiro-based device achieves an outstanding efficiency of 24.54 %, with an enhanced open-circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long-term stability in PSCs through innovative interfacial design., (© 2024 Wiley-VCH GmbH.)

Transition metal borides (MBenes) have recently drawn great attention due to their excellent electrochemical performance as anode materials for lithium-ion batteries (LIBs). Using the structural search code and first-principles calculations, we identify a group of the MB 3 monolayers (M = V, Nb and Ta) consisting of multiple MB 4 units interpenetrating with each other. The MB 3 monolayers with non-chemically active surfaces are stable and have metal-like conduction. As the anode materials for Li-ion storage, the low diffusion barrier, high theoretical capacity, and suitable average open circuit voltage indicate that the MB 3 monolayers have excellent electrochemical performance, due to the B 3 chain exposed on the surface improving the Li atoms' direct adsorption. In addition, the adsorbed Li-ions are in an ordered hierarchical arrangement and the substrate structure remains intact at room temperature, which ensures excellent cycling performance. This work provides a novel idea for designing high-performance anode materials for LIBs., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)