Search

This paper presents a novel active power control scheme for SRMs that are used as S/G units at MEAs; the proposed method uses a vector-controlled SAF, facilitating the acceleration of the SRM during starter mode and the efficient power control of the SRG at various operational points during generator mode. Moreover, an energy storage unit is incorporated in the SAF, aiming at enhancing the SRM's starting torque production and taking full advantage of the SRG's energy generation capability, through the appropriate phases’ magnetization regulation that is imposed by the developed adaptive SAF vector control. In addition, the proposed scheme provides enhanced FRTC during both modes of operation. The mathematical analysis is verified through MATLAB/Simulink simulations, while the performance of the S/G concept under study is evaluated via real-time CHIL tests, with the use of the dSPACE 1202 (MicroLabBox) platform and the 16-bit dsPIC30F4011 microcontroller. [ABSTRACT FROM AUTHOR]

This paper presents frequency domain (FD) Norton-type equivalents of single- and three-phase photovoltaic (PV) generators, aimed at transient calculations. The proposed equivalents can be interfaced with a general frequency-dependent network and/or nonlinear loads and include voltage/current sources representing initial conditions aimed at partitioned-time transient simulation. The transient solution is performed via the numerical Laplace transform (NLT) in a sequential scheme by using time sub-windows with corresponding initial conditions and using reduced number of samples. The proposed approach overcomes the issue of computationally heavy simulations as in classical implementations of NLT. Two case studies involving PV generator and nonlinear load are presented to illustrate the performance of the proposed FD PV models. [ABSTRACT FROM AUTHOR]

This paper focuses on the issue of network connectedness (NC) in security-constrained optimal transmission switching problems, which is complicated by branch contingencies and corrective line switching. Two criteria are firstly proposed with the principle of preserving NC as much as possible within reasonable limits. By extending the electrical flow based NC constraints, a proposition is derived to associate different cases of NC with the optimum of a linear program, yielding the mathematical formulation of the NC criteria. By Karush-Kuhn-Tucker conditions, this formulation is further transformed into a tractable version which can be incorporated with existing SCOTS models without affecting the applicability of original solution approaches. Finally, case studies on various networks and SCOTS models demonstrate the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

In this paper, a fault-tolerant control of a symmetrical six-phase induction generator based on a variable structure strategy is experimentally tested and compared with a classical proportional-integral controller. For this, we use a linear feedback sliding mode controller with switched feedback gains in such a way to control the inner current loops of this machine. One main drawback of the classical three-phase induction generator is that it is no longer possible to generate electrical power if only one phase is lost on the stator side. To overcome this issue, we will use a squirrel cage six-phase induction machine that can still operate when at least three phases remain on the stator side. This article proposes to use a variable structure control in order to cope with unbalanced currents and also maintain the generation of power when a loss of the stator's phases occurs. The proposed controller shows its robustness and good regulation performance in healthy and faulty modes. The simulation and experimental tests were carried out with a 24 kW induction machine that represents 1/100 of the electrical power of a real wind turbine. [ABSTRACT FROM AUTHOR]

Renewable energy is an advisable choice to reduce fuel consumption and $\rm CO_{2}$ emission. Therein, wind energy and solar energy are the most promising contributors to reach this goal. Although the hybrid wind/solar system has been widely studied, the real-time current sharing based on their maximum capacities is rarely achieved in terms of seconds. Based on this, this paper proposes an accurate current sharing and voltage regulation approach in hybrid wind/solar systems, which is based on distributed adaptive dynamic programming approach. Firstly, the equivalent wind/solar model is built, which is an indispensable preprocessing to achieve the complementary between wind energy and solar energy. Therein, the wind energy and solar energy can output relative current according to their respective capacity ratio, which ensure the maximum utilization ratio of renewable energy source. Furthermore, current sharing and voltage regulation problem is switched into optimal control problem. Under this effect, each source agent aims to obtain the optimal control variable and achieve accurate current sharing/voltage regulation. Moreover, an adaptive dynamic programming approach based on Bellman principle is proposed. It can achieve accurate current sharing and voltage regulation. Finally, the simulation results are provided to illustrate the performance of the proposed adaptive dynamic programming approach. [ABSTRACT FROM AUTHOR]

This paper proposes a new passive Islanding detection approach for the Inverter Interfaced Distributed Generators (IIDGs) operating under different control modes. First, a novel index is formulated using Root Mean Square (RMS) value of the voltage and the frequency information, acquired at the Point of Common Coupling (PCC) of the target DG. The index is then post-processed by estimating the number of peaks and valleys $(N_{p_{k}-v})$ in a cycle using the sliding window concept, which indicates the occurrence of an event. Finally, the nature of the event, i.e., Islanding or non-Islanding, is decided by exploiting the two statistical features viz., Square of RMS $(S_{RMS})$ of $N_{p_{k}-v}$ and Average Crest Factor $(ACF^{m})$ of the proposed index. The performance of the proposed method (P-IDM) is demonstrated through comprehensive studies in PSCAD/EMTDC for the single-bus and IEEE 34-bus Active Distribution System (ADS). Also, the real-time validation is performed for the IEEE 34-bus using Controller Hardware-in-the-Loop (CHIL) setup comprising of Real-Time Digital Simulator (RTDS) and dSPACE1104. The simulation and hardware results for different test systems indicate that the proposed scheme, being generic in nature, sustains its efficacy under various interface controls of IIDGs. Finally, a comparative assessment with the other existing Signal Processing (SP) based passive methodologies shows the supremacy of the proposed method in terms of accuracy and faster detection. [ABSTRACT FROM AUTHOR]

In this paper, a circulating-current-excited switched reluctance generator system with the diode rectifier is comparatively studied with a field-current-separated switched reluctance generator. By using a DC power source connected in series with the winding to provide the circulating current, a controllable excitation field is established in the proposed generator. To highlight the influence of this DC voltage source, the injected field current of the field-current-separated generator is kept the same as the circulating current of the circulating-current-excited generator. Then, both advantages and disadvantages of the generators are summarized. The circulating-current-excited switched reluctance generator system inherits both the advantages of good reliability of the separated-winding generator by using the diode rectifier and low copper loss of the integrated-winding machine by combining the AC and DC current in one set of windings. Furthermore, two more practically conventional field-current-separated generators are also compared with the proposed generator in terms of the external characteristics. These two conventional generators have different winding configurations. At last, the analysis is verified by experiments. [ABSTRACT FROM AUTHOR]

In the face of increasing natural disasters and an aging grid, utilities need to optimally choose investments to the existing infrastructure to promote resiliency. This paper presents a new investment decision optimization model to minimize unserved load over the recovery time and improve grid resilience to extreme weather event scenarios. Our optimization model includes a network power flow model which decides generator status and generator dispatch, optimal transmission switching (OTS) during the multi-time period recovery process, and an investment decision model subject to a given budget. Investment decisions include the hardening of transmission lines, generators, and substations. Our model uses a second order cone programming (SOCP) relaxation of the AC power flow model and is compared to the classic DC power flow approximation. A case study is provided on the 73-bus RTS-GMLC test system for various investment budgets and multiple hurricane scenarios to highlight the difference in optimal investment decisions between the SOCP model and the DC model, and demonstrate the advantages of OTS in resiliency settings. Results indicate that the network models yield different optimal investments, unit commitment, and OTS decisions, and an AC feasibility study indicates our SOCP resiliency model is more accurate than the DC model. [ABSTRACT FROM AUTHOR]

This paper proposes a multifunctional control strategy and associated control algorithms for distributed wind-turbine (WT) based nano-grids connected to a distorted utility-grid. The contribution is on a new strategy with innovative control algorithms to coordinate multiple converters for a multitasking operation of the nano-grids. The novelty is on a unique control design with feasibilities: maximizing the generated power from WT, maintaining power quality in both ac- and dc-sides under critical conditions of the power grid, and improving power quality against distortion from local nonlinear loads under a reduced switching frequency. A robust fast-dynamic predictive control method is developed for current controllers to fulfil the multifunction. Unconstrained deadbeat control inputs are derived in twofold targets: ensuring fast dynamic response and significantly reducing both the computation and switching frequency for finite predictive control. The control system is applied on a permanent-magnet synchronous generator (PMSG) WT-based nano-grid connected to a distorted utility-grid. An OPAL-RT-based real-time platform is used for comparative studies among the proportional integration (PI) control, finite predictive control (FS-MPC), and proposed control method. The performance verification exhibits the power quality improvement in both the nano- and utility-grids under critical conditions via high-performed regulation of currents, voltages, reactive power, and rotor-speed of the PMSG-WT. [ABSTRACT FROM AUTHOR]

X-ray computed tomography (CT) uses different filter kernels to highlight different structures. Since the raw sinogram data is usually removed after the reconstruction, in case there is additional need for other types of kernel images that were not previously generated, the patient may need to be scanned again. Accordingly, there exists increasing demand for post-hoc image domain conversion from one kernel to another without sacrificing the image quality. In this paper, we propose a novel unsupervised continuous kernel conversion method using cycle-consistent generative adversarial network (cycleGAN) with adaptive instance normalization (AdaIN). Even without paired training data, not only can our network translate the images between two different kernels, but it can also convert images along the interpolation path between the two kernel domains. We also show that the quality of generated images can be further improved if intermediate kernel domain images are available. Experimental results confirm that our method not only enables accurate kernel conversion that is comparable to supervised learning methods, but also generates intermediate kernel images in the unseen domain that are useful for hypopharyngeal cancer diagnosis. [ABSTRACT FROM AUTHOR]

The belt-driven starter/generator (BSG), as a cost-effective solution, has been widely employed in hybrid electric vehicles (HEVs) to improve the stability and reduce the fuel consumption of the vehicles. It can provide more than 10% reduction in CO2. Electrical machine is the heart of the BSG system, which is functioned both as motor and generator. In order to optimize both aspects of motor and generator simultaneously, this paper presents a new multimode optimization method for the switched reluctance machines. First, the general multimode concept and optimization method are presented. The switched reluctance motor and the switched reluctance generator are the two operation modes. The optimization models are established based on motor and generator functions. Sensitivity analysis, surrogate models and genetic algorithms are employed to improve the efficiency of the multimode optimization. Then, a design example of a segmented-rotor switched reluctance machine (SSRM) is investigated. Seven design variables and four driving modes are considered in the multiobjective optimization model. The Kriging model is employed to approximate the finite element model (FEM) in the optimization. Finally, the optimization results are depicted, and an optimal solution is selected. The comparison between the initial and optimal designs shows that the proposed method can improve the foremost performance of the SSRM under all driving modes. [ABSTRACT FROM AUTHOR]

Natural calamities always have been a serious threat to energy systems. In this regard, this paper constitutes a stochastic mixed integer linear programming (SMILP) model to enhance the resilience of power distribution systems to deal with disastrous events. In particular, the proposed model is developed to enhance both survivability and restoration capability of distribution systems. In this regard, to increase the preparedness of the power distribution system, the system operator reconfigures the network by utilizing remote-control switches (RCSs), manual switches (MSs), and distributed generations (DGs) before the natural calamity hits. The proposed model contemplates the traveling time of crew teams to the MS sites in the transportation system in order to achieve the best switching sequence. In addition, it pre-positions the crews and mobile emergency generators (MEGs) in staging locations to hasten the likely post-disturbance operations. To do so, likely post-event operations are included in the model using the scenario generation technique. To validate the performance of the developed model a distribution system is employed. The results of simulations confirm the effectiveness of the proposed approach in declining the interruption of electric energy for customers. [ABSTRACT FROM AUTHOR]