Search

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

Mobile and wireless communications are playing an irreplaceable role in our daily life. 5G is highly expected and can be considered as the convergence of mobile and wireless communications. This topic becomes one of the hottest research topics recently, and papers on this topic have been paid much attention. lists the top ten papers published in the IEEE Transactions on Microwave Theory and Techniques (TMTT) in 2019 with the highest numbers of Full Text View since published. Seven papers are about millimeter-waves (mm-waves), and because mm-waves multiple-input–multiple-output (MIMO) will be adopted globally, the 24.25–27.5-GHz band and 27–29.5-GHz bands are now approved worldwide as the standard 5G communication bands. The most popular paper is published by Asbeck et al. [item 1) in the Appendix] for mm-wave power amplifiers. [ABSTRACT FROM AUTHOR]

This paper studies the secure transmission in a multiuser broadcast channel where only the statistical channel state information of the eavesdropper is available. We propose to apply secret dirty-paper coding (S-DPC) in this scenario to support the secure transmission of one user and the normal (unclassified) transmission of the other users. By adopting the S-DPC and encoding the secret message in the first place, all the information-bearing signals of the normal transmission are treated as noise by potential eavesdroppers and thus provide secrecy for the secure transmission. In this way, the proposed approach exploits the intrinsic secrecy of multiuser broadcasting and can serve as an energy-efficient alternative to the traditional artificial noise (AN) scheme. To evaluate the secrecy performance of this approach and compare it with the AN scheme, we propose two S-DPC-based secure transmission schemes for maximizing the secrecy rate under constraints on the secrecy outage probability (SOP) and the normal transmission rates. The first scheme directly optimizes the covariance matrices of the transmit signals, and a novel approximation of the intractable SOP constraint is derived to facilitate the optimization. The second scheme combines zero-forcing dirty-paper coding and AN, and the optimization involves only power allocation. We establish efficient numerical algorithms to solve the optimization problems for both schemes. Theoretical and simulation results confirm that, in addition to supporting the normal transmission, the achievable secrecy rates of the proposed schemes can be close to that of the traditional AN scheme, which supports only the secure transmission of one user. [ABSTRACT FROM PUBLISHER]

A generalization of the problem of writing on dirty paper is considered in which one transmitter sends a common message to multiple receivers. Each receiver experiences on its link an additive interference (in addition to the additive noise), which is known noncausally to the transmitter but not to any of the receivers. Applications range from wireless multiple-antenna multicasting to robust dirty paper coding. We develop results for memoryless channels in Gaussian and binary special cases. In most cases, we observe that the availability of side information at the transmitter increases capacity relative to systems without such side information, and that the lack of side information at the receivers decreases capacity relative to systems with such side information. For the noiseless binary case, we establish the capacity when there are two receivers. When there are many receivers, we show that the transmitter side information provides a vanishingly small benefit. When the interference is large and independent across the users, we show that time sharing is optimal. For the Gaussian case, we present a coding scheme and establish its optimality in the high signal-to-interference-plus-noise limit when there are two receivers. When the interference power is large and independent across all the receivers, we show that time-sharing is again optimal. Connections to the problem of robust dirty paper coding are also discussed. [ABSTRACT FROM AUTHOR]

Multiple-input-multiple-output (MIMO) systems are of interest for meeting the expected demand for higher data rates and lower delays in future wireless packet data systems. In such systems, it is optimal to simultaneously transmit to multiple users compared with a single user in a single-input-single-output system. In addition, multicarrier systems are of interest to combat frequency-selective fading that is experienced over the larger bandwidth that these future broadband systems will use. The use of dirty paper coding further complicates the matter, because the order in which the users are encoded will affect the rates that they can achieve. A well-designed cross-layer scheduling algorithm must take into account the multiple dimensions of this resource-allocation problem and other quality-of-service (QoS) parameters to fully exploit the communications channel. The scheduling problem is often expressed in terms of optimizing some utility function. Unfortunately, the search space for this optimization problem is extremely large, which prohibits an optimal exhaustive search. To this end, we investigate the use of genetic algorithms to reduce the complexity of the scheduling. This paper builds upon prior work that implements scheduling via genetic algorithms in the context of single-carrier systems using zero-forcing beamforming (ZFB). In this paper, we investigate how the genetic algorithm can be adapted to account for the effect of encoding order on the scheduling and how the scheduling can be extended to a multicarrier system. In particular, we investigate the maximum throughput and proportionally fair scheduling criteria. We demonstrate that the performance of the genetic algorithm is near optimal compared with an exhaustive search at a greatly reduced computational complexity. Furthermore, in the case of a multicarrier orthogonal frequency-division multiplexing (OFDM) system, an increase in capacity is shown relative to the single-carrier case. [ABSTRACT FROM AUTHOR]

We consider transmission over the ergodic fading multiple-antenna broadcast (MIMO-BC) channel with partial channel state information at the transmitter and full information at the receiver. Over the equivalent non-fading channel, capacity has recently been shown to be achievable using transmission schemes that were designed for the "dirty paper" channel. We focus on a similar "fading paper" model. The evaluation of the fading paper capacity is difficult to obtain. We confine ourselves to the linear-assignment capacity, which we define, and use convex analysis methods to prove that its maximizing distribution is Gaussian. We compare our fading-paper transmission to an application of dirty paper coding that ignores the partial state information and assumes the channel is fixed at the average fade. We show that a gain is easily achieved by appropriately exploiting the information. We also consider a cooperative upper bound on the sum-rate capacity as suggested by Sato. We present a numeric example that indicates that our scheme is capable of realizing much of this upper bound. [ABSTRACT FROM AUTHOR]

The article discusses the telecommunication industry has evolved to provide services for new types of Internet of Things (IoT) devices in addition to basic mobile phone or internet services. Topics include the extended reality devices, sensors, and ground and aerial robots, to name a few. With the deployment of these new services, it is difficult for the wireless network to support ubiquitous connections with diverse quality-of-service (QoS) requirements.

This letter presents two results for multiuser wireless systems employing dirty-paper coding strategies along with greedy scheduling over the broadcast multiple-input multiple-output channel. Specifically, an efficient and suboptimal downlink scheduler is proposed to approximate the maximum sum rate using equal power allocation, and it is shown to approach the maximum sum rate of optimal power allocation for a large number of users under optimal scheduling. The second result demonstrates that the average maximum sum rate can be tightly upper bounded when spatial multiplexing is maximized. [ABSTRACT FROM AUTHOR]

The article reports that looking to 2030 and beyond, revolutionary enhancement of data transmission rates in sixth generation (6G) and beyond systems are required to meet the challenge of increasing communication traffic due to the massive exchange of information. Development of technologies and systems enabling Terabit-per-second (Tbps) wireless communications need to support long term exponential capacity increase of mobile communication networks.

This paper investigates an optimization of the conventional relay selection for multirelay environments. In contrast with previously reported selection schemes, where a selected relay accesses the channel in a dedicated cooperative slot, the proposed scheme recovers the bandwidth loss of the half-duplex constraint by allowing two relays to simultaneously access the channels. Based on an appropriate dirty-paper coding (DPC) technique among relays, the proposed scheme enables a relay to establish communication with the destination at the same time that another relay forwards the data from the source. It is proven that the interplay between relay selection and the superposition DPC weight factor provides a tradeoff between relaying and new data performance. Hence, an appropriate codesign of the superposition DPC parameter and opportunistic relay selection can achieve efficient communication for the new data without affecting the relaying performance. The proposed scheme is compared with conventional relaying approaches, and its enhancements are provided through theoretical studies and numerical results. [ABSTRACT FROM AUTHOR]

With the ratification of the IEEE 802.11ad amendment to the 802.11 standard in December 2012, a major step has been taken to bring consumer wireless communication to the millimeter wave band. However, multi-gigabit-per-second throughput and small interference footprint come at the price of adverse signal propagation characteristics, and require a fundamental rethinking of Wi-Fi communication principles. This article describes the design assumptions taken into consideration for the IEEE 802.11ad standard and the novel techniques defined to overcome the challenges of mm-Wave communication. In particular, we study the transition from omnidirectional to highly directional communication and its impact on the design of IEEE 802.11ad. [ABSTRACT FROM PUBLISHER]

In this paper, the feasibility of inkjet printing of circuit and microwave structures on paper-based substrates is investigated for the first time in the implementation of a complete low-cost wireless platform for sensors. First, the system-level design of the module including the amplifier characterization were carried out to ensure optimum performance of the sensor modules in the UHF bands used in RF identification communication. These results were then used to design two different antenna structures, which are printed on paper along with their respective circuit layouts using inket-printing technology. Different techniques were investigated for the assembly of circuit components on the silver printed layouts. Finally, wireless link measurements on the assembled prototypes verified the good performance on the wireless and sensing sides. [ABSTRACT FROM AUTHOR]

This paper demonstrates the design of an 800-MHz solar-powered active wireless beacon composed of an antenna and an integrated oscillator on a low-cost paper substrate. Inkjet printing is used to fabricate the conductive circuit traces and the folded slot antenna, while the oscillator circuit is designed using off-the-shelf components mounted on the paper substrate. Flexible, low-cost, amorphous silicon (a-Si) solar cells are placed on top of the slot ground and provide autonomous operation of the active circuit eliminating the use of a battery. A prototype is built and characterized in terms of phase noise, radiation patterns, and the effect of solar irradiance. Such low-cost flexible circuits can find significant applications as beacon generator circuits for real-time identification and position purposes, wearable biomonitoring as well as solar-to-wireless power transfer topologies. The measured phase noise is -\116 dBc/\Hz at 1-MHz offset, while drain current is 4 mA and supply voltage is 1.8 V. [ABSTRACT FROM AUTHOR]

In this correspondence, we compare the achievable throughput for the optimal strategy of dirty paper coding (DPC) to that achieved with suboptimal and lower complexity linear precoding techniques (zero-forcing and block diagonalization). Both strategies utilize all available spatial dimensions and therefore have the same multiplexing gain, but an absolute difference in terms of throughput does exist. The sum rate difference between the two strategies is analytically computed at asymptotically high SNR. Furthermore, the difference is not affected by asymmetric channel behavior when each user has a different average SNR. Weighted sum rate maximization is also considered. In the process, it is shown that allocating user powers in direct proportion to user weights asymptotically maximizes weighted sum rate. [ABSTRACT FROM AUTHOR]

Wireless data broadcast allows a large number of users to retrieve data simultaneously in mobile databases, resulting in an efficient way of using the scarce wireless bandwidth. However, the efficiency of data access methods is limited by an inherent property that data can only be accessed strictly sequentially by users. To properly cope with the inherent property, this paper presents three predaclaration-based transaction processing methods that yield a significant performance improvement in wireless data broadcast. [ABSTRACT FROM AUTHOR]

For multi-user multiple-input-multiple-output (MU-MIMO) system, transmitter utilizes a pre-equalizer based precoding to cancel inter-stream interference for parallel transmission with the aid of accurate feedback of channel state information (CSI) from all receivers. The correct power scaling factor, which normalizes the symbols power of precoding to be a constant one, is required at each receiver. Due to CSI error and limitation of feed-forward link, the received inaccurate power scaling factor will shrink or expand the received constellation points which severely degrades the performance of MIMO system. In this paper, using nonlinear vector perturbation (VP) and linear zero-forcing (ZF) precoding, we analyze the impact of inaccurate power scaling factor on the performance of a MIMO precoding system. The analyzed results show that the mismatched modulo size from inaccurate power scaling factor severely degrades the performance of the VP system, especially for high order M-QAM modulation. In addition, the performance degradation is strongly related with the distribution of representation points for each M-QAM symbol. For linear ZF precoding, the performance loss from the shrinked or expanded constellation points is severe for system using high order M-QAM. In addition, to alleviate the performance degradation, we propose a VP system using partial perturbation points (PPP). By limiting the region of redundant points with vector perturbation for partial M-QAM symbols, the performance degradation due to the inaccurate power scaling factor can be alleviated. [ABSTRACT FROM AUTHOR]

Consider several source nodes communicating across a wireless network to a destination node with the help of several layers of relay nodes. Recent work by Avestimehr has approximated the capacity of this network up to an additive gap. The communication scheme achieving this capacity approximation is based on compress-and-forward, resulting in noise accumulation as the messages traverse the network. As a consequence, the approximation gap increases linearly with the network depth. This paper develops a computation alignment strategy that can approach the capacity of a class of layered, time-varying wireless relay networks up to an approximation gap that is independent of the network depth. This strategy is based on the compute-and-forward framework, which enables relays to decode deterministic functions of the transmitted messages. Alone, compute-and-forward is insufficient to approach the capacity as it incurs a penalty for approximating the wireless channel with complex-valued coefficients by a channel with integer coefficients. Here, this penalty is circumvented by carefully matching channel realizations across time slots to create integer-valued effective channels that are well suited to compute-and-forward. Unlike prior constant gap results, the approximation gap obtained in this paper also depends closely on the fading statistics, which are assumed to be i.i.d. Rayleigh. [ABSTRACT FROM PUBLISHER]

In wireless networks, the link connectivity may be intermittent due to shadowing, burstiness of data arrival, or uncoordinated resource allocation. In this paper, we model the intermittence of links as Bernoulli distributed random channel states, termed intermittence channel states, and study the impact of the corresponding channel state information at the transmitter (CSIT) in a two-user Gaussian broadcast channel (BC). Moreover, due to the heterogeneous timeliness of intermittence channel states, the CSIT considered in this paper is hybrid. More specifically, the CSIT of each link can be perfectly (causally or non-causally) available, delayed, or not available. When the links are connected, we adopt a general setting that the received signal-to-noise ratios can be different. Our contribution is the characterization of the capacity regions of intermittent Gaussian BC to within bounded gaps for all combinations of hybrid CSIT, except for scenario DN (delayed CSIT of receiver 1, no CSIT of receiver 2). For scenario DN, we propose an opportunistic physical layer network coding scheme that achieves a strictly larger degree-of-freedom (DoF) region than the no-CSIT DoF region. As a corollary, single-user CSIT is able to increase the sum DoF for intermittent Gaussian BC (also the capacity region for the erasure BC, as a by-product). This result is in sharp contrast to the recent negative result by Davoodi and Jafar, where it is shown that for fast-fading multiple-input single-output BC with continuous channel states, single-user CSIT does not help at all in terms of sum DoF. [ABSTRACT FROM AUTHOR]

Vehicle-to-vehicle (V2V) wireless communication systems are fundamental in many intelligent transportation applications, e.g., traffic load control, driverless vehicle, and collision avoidance. Hence, developing appropriate V2V communication systems and standardization require realistic V2V propagation channel models. However, most existing V2V channel modeling studies focus on car-to-car channels; only a few investigate truck-to-car (T2C) or truck-to-truck (T2T) channels. In this paper, a hybrid geometry-based stochastic model (GBSM) is proposed for T2X (T2C or T2T) channels in freeway environments. Next, we parameterize this GBSM from the extensive channel measurements. We extract the multipath components (MPCs) by using a joint maximum likelihood estimation (RiMAX) and then determine the cluster types based on their evolution patterns. We classify the determined clusters into line-of-sight, single-bounce reflections from static interaction objects (IOs), single-bounce reflections from mobile IOs, multiple-bounce reflections, and density multipath components (DMCs). Particularly, we model multiple-bounce reflections as double clusters following the COST 273/COST2100 method. This paper presents the complete parameterization of the channel model. We validate this model by comparing the delay spread and the angular spreads of arrival/departure obtained from the proposed model with the measurement data. [ABSTRACT FROM AUTHOR]

The Piergiorgio L. E. Uslenghi Letters Prize Paper Award was established in 2009 to recognize the best contribution published in the IEEE Antennas and Wireless Propagation Letters during the previous year. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted wireless communication system and present two joint channel estimation and signal recovery schemes based on message passing algorithms in this paper. Specifically, the proposed bidirectional scheme applies the Taylor series expansion and Gaussian approximation to simplify the sum-product procedure in the formulated problem. In addition, the inner iteration that adopts two variants of approximate message passing algorithms is incorporated to ensure robustness and convergence. Two ambiguities removal methods are also discussed in this paper. Our simulation results show that the proposed schemes show the superiority over the state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed schemes. [ABSTRACT FROM AUTHOR]

The explosive growth of Internet-of-Things (IoT) applications such as smart cities and Industry 4.0 have led to drastic increase in demand for wireless bandwidth, hence motivating the rapid development of new techniques for enhancing spectrum utilization needed by new generation wireless communication technologies. Among others, dynamic spectrum access (DSA) is one of the most widely accepted approaches. In this paper, as an enhancement of existing works, we take into consideration of inter-node collaborations in a dynamic spectrum environment. Typically, in such distributed circumstances, intelligent dynamic spectrum access almost invariably relies on self-learning to achieve dynamic spectrum access improvement. Whereas, this paper proposes a DSA scheme based on deep reinforcement learning to enhance spectrum and access efficiency. Unlike traditional Q-learning-based DSA, we introduce the following to enhance the spectrum efficiency in dynamic IoT spectrum environments. First, deep double Q-learning is adopted to perform local self-spectrum-learning for IoT terminals in order to achieve better dynamic access accuracy. Second, to accelerate learning convergence, federated learning (FL) in edge nodes is used to improve the self-learning. Third, multiple secondary users, who do not interfere with each other and have similar operation condition, are clustered for federated learning to enhance the efficiency of deep reinforcement learning. Comparing with the traditional distributed DSA with deep learning, the proposed scheme has faster access convergence speed due to the characteristic of global optimization for federated learning. Based on this, a framework of federated deep reinforcement learning (FDRL) for DSA is proposed. Furthermore, this scheme preserves privacy of IoT users in that FDRL only requires model parameters to be uploaded to edge servers. Simulations are performed to show the effectiveness of theproposed FDRL-based DSA framework. [ABSTRACT FROM AUTHOR]

In this paper, the design of a multiple-input multiple-output (MIMO) optical wireless communication (OWC) link based on vertical cavity surface emitting laser (VCSEL) arrays is systematically carried out with the aim to support data rates in excess of 1 Tb/s for the backhaul of sixth generation (6G) indoor wireless networks. The proposed design combines direct current optical orthogonal frequency division multiplexing (DCO-OFDM) and a spatial multiplexing MIMO architecture. For such an ultra-high-speed line-of-sight (LOS) OWC link with low divergence laser beams, maintaining alignment is of high importance. In this paper, two types of misalignment error between the transmitter and receiver are distinguished, namely, radial displacement error and orientation angle error, and they are thoroughly modeled in a unified analytical framework assuming Gaussian laser beams, resulting in a generalized misalignment model (GMM). The derived GMM is then extended to MIMO arrays and the performance of the MIMO-OFDM OWC system is analyzed in terms of the aggregate data rate. Novel insights are provided into the system performance based on computer simulations by studying various influential factors such as beam waist, array configuration and different misalignment errors, which can be used as guidelines for designing short range Tb/s MIMO OWC systems. [ABSTRACT FROM AUTHOR]

In concurrent spectrum sharing scenarios between radars and wireless communication systems, one strict approach to protect the radar from undesired interference is locating the base stations outside a guard (or exclusion) zone of the radar. As a result, users inside that zone experience bad communication coverage. This paper uses Reconfigurable Intelligent Surfaces (RISs) to improve the base station coverage of users in the radar exclusion zone. The paper shows, through analysis and simulation, that joint optimization of base station and RIS locations improves the probability of coverage in the exclusion zone over the shared spectrum without disturbing the radar operation. [ABSTRACT FROM AUTHOR]

Fixed Satellite Services (FSS) used to be alone at the C-Band spectrum in most countries. Since the deployment of 5G in many countries (i.e., 3.3–3.6 GHz), FSS is not the exclusive system in the C-Band anymore. In order to minimize the detrimental interference for the FSS to allowable levels, regional exclusion zones of maximum radiated power in 5G base stations (BS) are proposed and evaluated. In this paper, a measurement campaign has been carried out, and an analysis of the interference has been studied. A filtering model, namely Filter to Remove Broadband Interference 5G (FIREBRING), is proposed and analyzed concerning the carrier-to-noise ratio (C/N). Moreover, this paper focuses on the evaluation of the 5G interference into the FSS. The proposed solution deployed an Low-Noise Block (LNB) with a band frequency of 3.7 to 4.2 GHz to test the satellite down-conversion signal at the receiver. The paper offered a complete analysis of the 5G signal, taking into account the implications of out-of-band emissions, potentially LNB saturation into FSS receiver, and the repercussions of the deployment of the 5G BS active antenna systems. With the LNB and down-converter in place, it can be found that the signal interference between 1.450 GHz and 1.550 GHz, is nearly 18 dB. [ABSTRACT FROM AUTHOR]

The article presents the winners in the Harold A. Wheeler Applications Prize Paper Award for 2017. It highlight the significance of the award which recognizes authors of the best applications paper published in the Institute of Electrical and Electronics Engineers (IEEE) Transactions on Antennas and Propagation. The winners include Dia'aaldin J. Bisharat, Shaowei Liao and Quan Xue.

Reconfigurable intelligent surface (RIS) technology is promising to enhance wireless communications services by providing smart radio environment. In this paper, we investigate the RIS aided cellular networks with device-to-device (D2D) users, and maximize the sum of the transmission rate of the D2D communications and the cellular networks from a new perspective. In addition to solving the typical resource allocation problems for D2D communications, this paper further optimize the wireless environment by adjusting the position and phase shift of the RIS. To solve this non-convex problem, we propose a novel decentralized double deep Q-network (D3QN) framework for the resource allocation at users and a centralized DDQN for RIS optimization at the base station (BS), which are verified to achieve the near-optimal performance with lower complexity and enhanced robustness. Simulation results illustrate that the proposed framework can achieve higher transmission rates compared to benchmarks, meanwhile meeting the quality of service (QoS) requirements at the BS and D2D users. [ABSTRACT FROM AUTHOR]

The reconfigurable intelligent surface (RIS), which consists of many low-cost reflecting elements, can enhance the reception of the desired signal and suppress the interference. Considering the above advantages, this paper investigates the RIS-assisted wireless communication in the presence of an interferer, where a receiver receives the desired signal and interference from a transmitter and an interferer, respectively, and the RIS is deployed to assist this system. First, an interference-limited channel capacity maximization problem is formulated, and a numerical algorithm based on the fraction programming and optimality conditions is proposed to obtain the optimal solution. Then, this paper shows the upper boundary of the maximal capacity with interference and discusses what kind of channel conditions can achieve the upper boundary and the corresponding optimal phase shifts. Next, this paper analyzes the asymptotic behaviors of the maximal capacity in the scenarios that some or all of the number of reflecting elements, antennas at the transmitter, and interferer go to infinity. Finally, this paper generalizes the above results to the multiple interferers scenario. [ABSTRACT FROM AUTHOR]

Indoor optical wireless communication (IOWC) is a key technology complementing radio communication in 6G. Typically, the downlink of IOWC is implemented using visible light and uplink is implemented using infrared. Though the downlink of IOWC has been studied well, the uplink of multiple-access IOWC requires further research. In this paper, power allocation strategies in the uplink of IOWC with multiple non-cooperative users is studied. Optimizing power allocation in IOWC that maximize sum-rate with power constraints becomes a non-convex problem. First, this paper proposes an alternating maximization algorithm to compute near optimal power allocation policies for small number of users. Next, a phenomenon of invariance is observed when the number of users in the system is large. Under invariance, the optimal power allocation policy of a user becomes independent of other users, thereby facilitating fast and decentralized computation of power allocation strategies. From simulations, it was observed that the invariance can occur even with five to ten users. For the first time, a rigorous analysis of the invariance phenomenon is provided. An algorithm to compute the optimal power allocation at invariance is proposed; this algorithm is proven to achieve the global maxima in sum-rate without the channel knowledge of other users. [ABSTRACT FROM AUTHOR]

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM AUTHOR]

This paper studies a multiple-input–single-output (MISO) broadcast channel (BC) featuring simultaneous wireless information and power transfer, where a multiantenna access point (AP) delivers both information and energy via radio signals to multiple single-antenna receivers simultaneously, and each receiver implements either information decoding (ID) or energy harvesting (EH). In particular, pseudorandom sequences that are a priori known and therefore can be cancelled at each ID receiver are used as the energy signals, and the information-theoretically optimal dirty paper coding is employed for the information transmission. We characterize the capacity region for ID receivers by solving a sequence of weighted sum-rate (WSR) maximization (WSRMax) problems subject to a maximum sum-power constraint for the AP, and a set of minimum harvested power constraints for individual EH receivers. The problem corresponds to a new form of WSRMax problem in MISO-BC with combined maximum and minimum linear transmit covariance constraints (MaxLTCCs and MinLTCCs), which differs from the celebrated capacity region characterization problem for MISO-BC under a set of MaxLTCCs only and is challenging to solve. By extending the general BC–multiple-access-channel duality, which is only applicable to WSRMax problems with MaxLTCCs, and applying the ellipsoid method, we propose an efficient iterative algorithm to solve this problem globally optimally. Furthermore, we also propose two suboptimal algorithms with lower complexity by assuming that the information and energy signals are designed separately. Finally, numerical results are provided to validate our proposed algorithms. [ABSTRACT FROM PUBLISHER]

The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototyping of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 controllable elements working at 5.8 GHz band. We propose an efficient algorithm for configuring the RIS over the air by exploiting the geometrical array properties and a practical receiver-RIS feedback link. In our indoor test, where the transmitter and receiver are separated by a 30 cm thick concrete wall, our RIS prototype provides a 26 dB power gain compared to the baseline case where the RIS is replaced by a copper plate. A 27 dB power gain was observed in the short-distance outdoor measurement. We also carried out long-distance measurements and successfully transmitted a 32 Mbps data stream over 500 m. A 1080p video was live-streamed and it only played smoothly when the RIS was utilized. The power consumption of the RIS is around 1 W. Our paper is vivid proof that the RIS is a very promising technology for future wireless communications. [ABSTRACT FROM AUTHOR]

The matroidal connectivity and conditional matroidal connectivity are novel indicators to measure the real faulty tolerability. In this paper, for the $n$ n -dimensional alternating group graph $AG_{n}$ A G n , the structure properties and (conditional) matroidal connectivity are studied based on the dimensional partition of $E(AG_{n})$ E (A G n) . We prove that for $S\subseteq E(AG_{n})$ S ⊆ E (A G n) under some limitation on the number of faulty edges in each dimensional edge set, if $|S|\leq (n-1)!-1$ | S | ≤ (n - 1) ! - 1 , then $AG_{n}-S$ A G n - S is connected. We study the value of matroidal connectivity and conditional matroidal connectivity of $AG_{n}$ A G n . Furthermore, simulations have been carried out to compare the matroidal connectivity with other types of conditional connectivity in $AG_{n}$ A G n . The simulation result shows that the matroidal connectivity significantly improves these known fault-tolerant capability of alternating group graphs. [ABSTRACT FROM AUTHOR]

This paper considers a caching system of a single server and multiple users. We aim to characterize the memory-rate tradeoff for caching with uncoded cache placement, under nonuniform file popularity. Focusing on the modified coded caching scheme (MCCS) recently proposed by Yu, etal., we formulate the cache placement optimization problem for the MCCS to minimize the average delivery rate under nonuniform file popularity, restricting to a class of popularity-first placements. We then present two information-theoretic lower bounds on the average rate for caching with uncoded placement, one for general cache placements and the other restricted to the popularity-first placements. By comparing the average rate of the optimized MCCS with the lower bounds, we prove that the optimized MCCS attains the general lower bound for the two-user case, providing the exact memory-rate tradeoff. Furthermore, it attains the popularity-first-based lower bound for the case of general $K$ users with distinct file requests. In these two cases, our results also reveal that the popularity-first placement is optimal for the MCCS, and zero-padding used in coded delivery incurs no loss of optimality. For the case of $K$ users with redundant file requests, our analysis shows that there may exist a gap between the optimized MCCS and the lower bounds due to zero-padding. We next fully characterize the optimal popularity-first cache placement for the MCCS, which is shown to possess a simple file-grouping structure and can be computed via an efficient algorithm using closed-form expressions. Finally, we extend our study to accommodate nonuniformity in both file popularity and size, where we show that the optimized MCCS attains the lower bound for the two-user case, providing the exact memory-rate tradeoff. Numerical results show that, for general settings, the gap between the optimized MCCS and the lower bound only exists in limited cases and is very small. [ABSTRACT FROM AUTHOR]

Human Body Communication (HBC) is an alternative to radio wave-based Wireless Body Area Network (WBAN) because of its wide bandwidth leading to enhanced energy efficiency. Designing Modern HBC devices need the accurate electrical equivalent of the HBC channel for energy efficient communication. The objective of this paper is to present an improved lumped element-based detailed model of Galvanic HBC channel which can be used to explain the dependency of the channel behaviour on the internal body dependent parameters such as electrical properties of skin and muscle tissue layers along with the external parameters such as electrode size, electrode separation, geometrical position of the electrodes and return-path or parasitic capacitances. The model considers the frequency-dependent impedance of skin and muscle tissue layers and the effect of various coupling capacitances between the body and Tx/Rx electrodes to the Earth-Ground. A 2D planar structure of skin and muscle tissue layers is simulated using a Finite Element Method (FEM) tool to prove the validity of the proposed model. The effect of symmetry and asymmetry at the transmitter and receiver ends is also explained using the model. The model become very useful for fast calculation of Galvanic channel response without using any FEM tool. Experimental results show that the galvanic response is not only a function of channel length but also depends on the mismatch at the transmitter and receiver end. In case of a very high mismatch scenario, the channel behavior is dominated by the capacitive HBC, even for a galvanic excitation and termination. [ABSTRACT FROM AUTHOR]

This paper derives the asymptotic distribution of the normalized $k$ -th maximum order statistics of a sequence of non-central chi-square random variables with non-identical non-centrality parameters. We demonstrate the utility of these results in characterizing the signal-to-noise ratio in three different applications in wireless communication systems where the statistics of the $k$ -th maximum channel power over Rician fading links are of interest. Furthermore, we derive simple expressions for the asymptotic outage probability, average throughput, achievable throughput, and average bit error probability. The proposed results are validated via extensive Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

In this paper, we consider deploying an intelligent reflecting surface (IRS) to enhance the downlink (DL) energy transfer and uplink (UL) information transmission efficiency for secure multiple-input multiple-output (MIMO) wireless powered communication networks (WPCNs). We aim to maximize the secrecy throughput of all users by jointly optimizing the DL/UL time allocation, the energy transmit covariance matrix of hybrid access point (AP), the information transmit beamforming matrix of users and the phase shifts of IRS in DL/UL, subject to constraints of energy/information transmit power at the hybrid AP/users and that of unit-modulus IRS phase shifts for DL/UL. To tackle the non-convex problem, we first transform the original problem into an equivalent form based on the mean-square error (MSE) method given time allocation, and then apply the alternating algorithm to update the optimization variables iteratively. Specifically, the energy covariance matrix and the information beamforming matrix are obtained based on the dual subgradient method. For the IRS phase shifts, we investigate two IRS beamforming reflection setups, namely different DL/UL IRS beamforming and identical DL/UL IRS beamforming. For the former case, the second-order cone programming technique and the Majorization-Minimization algorithm/element by element iterative algorithm are applied to obtain the DL and UL IRS phase shifts, respectively. For the latter case, the IRS phase shifts are obtained by the successive convex approximation technique. To further reduce the computational complexity of the single-user system, we derive the closed-form solutions of IRS phase shifts in each iteration for the two different reflection setups. Simulation results show that all the proposed algorithms can greatly improve the secrecy throughput compared to the conventional system without IRS. [ABSTRACT FROM AUTHOR]

The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) waves. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In this paper, we propose a complete and detailed circuit-based reflection-refraction model for the IOS, which is formulated in terms of the physical structure and equivalent circuits of the IOS elements, as well as we validate it with the aid of full-wave EM simulations. Based on the proposed circuit-based model for the IOS, we analyze the asymmetry between the reflection and transmission coefficients. Moreover, the proposed circuit-based model is utilized for optimizing the hybrid beamforming of IOS-assisted networks and hence improving the system performance. To verify the circuit-based model, the theoretical findings, and to evaluate the performance of full-dimensional beamforming, we implement a prototype of IOS and deploy an IOS-assisted wireless communication testbed to experimentally measure the beam patterns and to quantify the achievable rate. The obtained experimental results validate the theoretical findings and the accuracy of the proposed circuit-based reflection-refraction model for IOSs. [ABSTRACT FROM AUTHOR]

Spectral-compatible radar emission has a paramount importance in realizing the coexistence of radar with wireless communications. In this paper, we deal with the design of spectral-compatible transmit beampattern with minimum peak sidelobe level for a narrowband multiple-input multiple-output(MIMO) radar. We also consider constraints that are imposed due to the practical high power amplifier(HPA) used in modern radars. The constraints are used to control the dynamic range on the magnitude of each signal, to control variations in the transmit power from the individual antennas and the total energy of the signals. The considered problem is challenging as it is non-convex. To this end, we propose an iterative solution that incorporates the majoriztion-minimization(MM) and alternating direction method of multipliers(ADMM) frameworks. Our solution avoids the computationally expensive operations such as matrix inverse and eigenvalue decomposition. We provide numerical results to validate the proposed solution. The results show that the method provides the intended spectral-compatible beampattern while maintaining a beampattern synthesize performance that is comparable to the state-of-the-art work. [ABSTRACT FROM AUTHOR]

Massive MIMO is a promising air interface technology for 5G wireless communications. Such antenna systems offer capabilities to utilize channel correlations to create beams suitable for user specific transmissions. Most of the prior research is devoted to user-specific transmission in such systems, where a narrow beam is formed towards a user to improve its reception. Meanwhile, public-channel transmission to multiple users at once by means of broad beams has been understudied. In this paper, we introduce the concept of array-size invariant (ASI) beamforming, enabling generation of broad beams from very large antenna arrays where all elements are transmitting at maximum power. The ASI technique offers the possibility to achieve a perfectly flat array factor by exploiting the additional degree of freedom coming from the dual-polarization beamforming. The proposed technique is applicable to both uniform linear and rectangular arrays. The benefits of the method are shown by means of several numerical examples. In particular, the practical usefulness of the ASI beamforming, in terms of coverage and energy efficiency, is illustrated on an example of designing a cell-specific broad beam for public-channel transmission in a realistic network deployment. [ABSTRACT FROM AUTHOR]

With the explosive growth of mobile data, the demand of high-speed railway (HSR) passengers for broadband wireless access services urgently needs the support of ultra-high-speed scenario broadband wireless communication. Millimeter-wave (mmWave) can achieve high data transmission rates, but it is accompanied by high propagation loss and vulnerability to blockage. To address this issue, developments of directional antennas and unmanned aerial vehicles (UAVs) enhance the robustness of the mmWave train-ground communication system. In this paper, we propose a UAV and MRs relay assistance (UMRA) algorithm to effectively overcome link blockage, which can maximize the number of transmission flows on the premise of meeting QoS requirements and channel qualities. First, we formulate a mixed integer nonlinear programming (MINLP) problem for UAV trajectory design and transmission scheduling in the full-duplex (FD) mode. Then, in UMRA, the relay decision algorithm and transmission scheduling algorithm based on graph theory are proposed, which make a good tradeoff between computation complexity and system performance. Extensive simulation results show that a suitable UAV position will greatly improve the performance of the UMRA algorithm and make it close to the optimal solution. Compared with the other two existing benchmark schemes, with the high channel quality requirements and large-area blockage, UMRA can greatly improve the number of completed flows and system throughput. [ABSTRACT FROM AUTHOR]

In this paper, we derive an upper bound on load-threshold of coded slotted ALOHA (CSA) for slot erasure channel (SEC) and that for packet erasure channel (PEC), respectively. In SEC, by exploiting the analogy between Gaussian elimination of solving linear equations and the iterative successive interference-cancellation (SIC) decoding procedure of CSA, we derive the upper performance bound for SEC. Subsequently, in PEC, utilizing density evolution to track the average probability of packet-decoded failure within the SIC decoding process, we obtain the upper bound for PEC. Moreover, we propose a numerical search algorithm of these bounds under a given calculating precision. The numerical results indicate that the asymptotic upper limit on load-threshold of CSA over SEC is always less than that over PEC with any given erasure probability and average transmission rate. [ABSTRACT FROM AUTHOR]

Control- and user-plane separation (CUPS) and network slicing are two key technologies to support increasing network traffic and diverse wireless services. However, the benefit of CUPS in decoupling the network coverage and data service functions has not been fully utilized to facilitate network slicing. In this paper, we present a novel CUPS-based end-to-end (CUPS-E2E) network slicing scheme. First, the base stations (BS) are classified into control BSs (CBS) that provide control plane (CP) coverage and traffic BSs (TBS) that deliver user plane (UP) traffic. Next, upon CBSs and TBSs being virtualized, we define four typical end-to-end (E2E) network slices: one for CP coverage, one for high-throughput services, one for computation-intensive services, and the other for delay-sensitive services. The utilities of the four E2E network slices are defined based on their coverage, throughput, computing capability and delay requirements, respectively. Then, a deep deterministic policy gradient (DDPG)-based algorithm is employed to maximize the long-term sum-utility of the four E2E network slices by jointly optimizing the allocation of communication and computing resources to the four network slices and the activation of virtual TBSs, while meeting the service requirements of all users. Simulation results show that our proposed CUPS-E2E network slicing scheme in conjunction with a DDPG-based sum-utility maximization algorithm can support the CP wide-coverage and massive access requirements as well as the UP high-throughput, computation-intensive and delay-sensitive services simultaneously, and outperforms the existing E2E network slicing schemes in terms of the sum-utility, coverage percentage, throughput and delay. [ABSTRACT FROM AUTHOR]

The new Fifth generation (5G) of wireless communications and beyond 5G (B5G) networks are required to provide connectivity for massive number of devices at high speed and low latency. Within this context, non-orthogonal multiple access (NOMA) has been involved and emerged in recent research since it is considered as an enabling technology for 5G and B5G networks. NOMA allows several users to share the same resources of time and frequency, making it an excellent candidate to provide impressively large connectivity with high spectral efficiency. In this paper, we study the performance of NOMA systems assuming independent but not necessarily to be identical $N$ -Nakagami-m multipath fading channels. This channel model subsumes the double Nakagami-m, which was investigated in the context of intervehicular communications and keyhole multiple input multiple output systems, as special cases. To this end, we derive exact analytical and asymptotic expressions for the probability density function of the overall signal to noise ratio, system capacity, and the pairwise error probability (PEP) for each user. Numerical results are also provided herein to show the effects of fading parameters and number of users on the capacity and the PEP of each user. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) can be deployed as flying base stations (BSs) to leverage the strength of line-of-sight connections and effectively support the coverage and throughput of wireless communication. This paper considers a multiuser communication system, in which a single-antenna UAV-BS serves a large number of ground users by employing non-orthogonal multiple access (NOMA). The max-min rate optimization problem is formulated under total power, total bandwidth, UAV altitude, and antenna beamwidth constraints. The objective of max-min rate optimization is non-convex in all optimization variables, i.e., UAV altitude, transmit antenna beamwidth, power allocation, and bandwidth allocation for multiple users. A path-following algorithm is proposed to solve the formulated problem. Next, orthogonal multiple access (OMA) and dirty paper coding (DPC)-based max-min rate optimization problems are formulated and respective path-following algorithms are developed to solve them. The numerical results show that NOMA outperforms OMA and achieves rates similar to those attained by DPC. In addition, a clear rate gain is observed by jointly optimizing all the parameters rather than optimizing a subset of parameters, which confirms the desirability of their joint optimization. [ABSTRACT FROM AUTHOR]