17 results on '"Liu, Dongyun"'
Search Results
2. Pure and strong red photoluminescence from Na0.5Gd0.5TiO3: Eu ferroelectric thin films under ultraviolet light excitation
- Author
-
Gao, Feng, Sun, Lina, Tan, Jun, Li, Xinsheng, Liu, Dongyun, and Liang, Duoqiang
- Published
- 2017
- Full Text
- View/download PDF
3. Modified calculation model of train-induced aerodynamic pressure on vertical noise barriers considering the train geometry effect.
- Author
-
Liu, Dongyun, Wang, Chao, Gonzalez-Libreros, Jaime, Tu, Yongming, Elfgren, Lennart, and Sas, Gabriel
- Subjects
- *
NOISE barriers , *HIGH speed trains , *GREY relational analysis , *COMPUTATIONAL fluid dynamics , *AERODYNAMIC noise , *AERODYNAMIC load - Abstract
High-speed trains (HSTs) generate air disturbance, leading to significant aerodynamic pressure on the noise barriers. Differences in train geometry result in variations in the aerodynamic pressure on noise barriers, implying that existing European standard calculation models may not necessarily be suitable for all types of HSTs. In this paper, the influence of the width, height, and nose length of the train on the aerodynamic pressure on vertical noise barriers was studied using computational fluid dynamics (CFD) simulations. Results showed that taller and wider trains result in greater aerodynamic loads on noise barriers. Conversely, an increase in the nose length of a train leads to a reduction in such pressure. Using grey relational analysis, correlation of various factors with the train-induced aerodynamic pressure is, from strong to weak: distance to the track center, width, height, and nose length of the train. Building upon the EN 14067-4 calculation model, the shape coefficients of trains with varying geometric characteristics were derived using the simulation data obtained in this study. A modified pressure calculation model was established accounting for the differences in geometric features of HSTs and pressure distribution in the vertical direction of noise barriers and validated using relevant data from the literature. • Evaluated the effect of train geometries on aerodynamic pressure on noise barrier. • Conducted grey relational analysis of various factors with aerodynamic pressure. • Proposed a modified pressure calculation model considering train geometry effect. • Described pressure distribution in the vertical direction of noise barrier. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. Equisetin is an anti-obesity candidate through targeting 11β-HSD1.
- Author
-
Xu, Zhenlu, Liu, Dongyun, Liu, Dong, Ren, Xue, Liu, Haibo, Qi, Guihong, Zhou, Yue, Wu, Chongming, Zhu, Kui, Zou, Zhongmei, Yuan, Jing, Lin, Wenhan, and Guo, Peng
- Subjects
ADIPOSE tissues ,BLOOD pressure ,HEART beat ,SEARCH engines ,FOOD consumption ,LEPTIN - Abstract
Obesity is increasingly prevalent globally, searching for therapeutic agents acting on adipose tissue is of great importance. Equisetin (EQST), a meroterpenoid isolated from a marine sponge-derived fungus, has been reported to display antibacterial and antiviral activities. Here, we revealed that EQST displayed anti-obesity effects acting on adipose tissue through inhibiting adipogenesis in vitro and attenuating HFD-induced obesity in mice, doing so without affecting food intake, blood pressure or heart rate. We demonstrated that EQST inhibited the enzyme activity of 11 β -hydroxysteroid dehydrogenase type 1 (11 β -HSD1), a therapeutic target of obesity in adipose tissue. Anti-obesity properties of EQST were all offset by applying excessive 11 β -HSD1's substrates and 11 β -HSD1 inhibition through knockdown in vitro or 11 β -HSD1 knockout in vivo. In the 11 β -HSD1 bypass model constructed by adding excess 11 β -HSD1 products, EQST's anti-obesity effects disappeared. Furthermore, EQST directly bond to 11 β -HSD1 protein and presented remarkable better intensity on 11 β -HSD1 inhibition and better efficacy on anti-obesity than known 11 β -HSD1 inhibitor. Therefore, EQST can be developed into anti-obesity candidate compound, and this study may provide more clues for developing higher effective 11 β -HSD1 inhibitors. Equisetin suppresses lipid accumulation in adipose tissue to curb diet-induced obesity through inhibiting 11 β -HSD1 activity. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
5. Migration of inorganic chlorine during thermal treatment of mineralized waste.
- Author
-
Li, Wenxiang, Liu, Dongyun, Shen, Dongsheng, Hu, Lifang, Yao, Jun, and Long, Yuyang
- Subjects
- *
WASTE treatment , *CHLORINE , *CHLORINATION , *POLLUTION , *INCINERATION , *WATER chlorination - Abstract
• Migration of inorganic chlorine in MW thermal processing was explored. • Furnace temperature significantly correlated with inorganic chloride deposition. • Greatest deposition of inorganic chlorine inside the furnace occurred during pyrolysis. Chlorine is a common element in the environment where it mostly exists in an inorganic ionic state that is highly mobile and non-degradable. It is important to investigate the potential release of chlorine into the environment from mineralized waste (MW) for stable landfill reclamation. In this study, inorganic chlorine in the MW migration process was explored during thermal treatment for chlorine pollution control. The temperature and chlorine greatly affected the distribution of inorganic chlorine in the thermally treated products. Below 800 °C, more than 60% of the inorganic chlorine remained in the bottom slag. Above 900 °C, volatilization caused the release of chlorine from the MW and more than 75% of the inorganic chlorine was deposited inside the furnace. The mass of inorganic chlorine deposited in the thermal treatment furnace was significantly correlated with the actual temperature. At 1000 °C, the masses of inorganic chlorine deposited under pyrolysis, incineration, and gasification atmospheres were 7.69, 5.81, and 5.68 mg, respectively. The greatest deposition of inorganic chlorine inside the furnace occurred during pyrolysis. The chlorine migration process must gain more sight during MW thermal processing. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
6. A review on aerodynamic load and dynamic behavior of railway noise barriers when high-speed trains pass.
- Author
-
Liu, Dongyun, Wang, Chao, Gonzalez-Libreros, Jaime, Tu, Yongming, Elfgren, Lennart, and Sas, Gabriel
- Subjects
- *
NOISE barriers , *AERODYNAMIC load , *HIGH speed trains , *DYNAMIC loads , *AERODYNAMIC measurements , *NOISE pollution - Abstract
Noise barriers need to be installed along high-speed railway lines to protect nearby inhabitants from the noise pollution caused by the running of high-speed trains (HSTs). The vertical noise barrier is the main structural type. However, when an HST passes through the noise barriers sited along the track, significant and transient aerodynamic pressure will act on the surface of the noise barriers, resulting in strong dynamic responses and even fatigue damage. Therefore, it is important to determine the train-induced aerodynamic load on the barrier surface and analyze the dynamic behaviors of the noise barriers under such a load for its structural design and to guarantee its safety and durability. This paper is a systematic review of the current literature on the aerodynamic load and dynamic behavior of vertical noise barriers; it includes (1) a summary and analysis of characteristics of such aerodynamic pressure and relevant influencing factors, (2) an introduction to measurement methods of aerodynamic load and relevant pressure models on the surface of noise barriers, and (3) a description of the dynamic response and fatigue analysis of noise barriers under such loads. Finally, potential further studies on this topic are discussed, and conclusions are drawn. • Characteristics and influencing factors of aerodynamic pressure of railway noise barrier. • Measurement methods and models of aerodynamic load of noise barriers. • Dynamic response and fatigue analysis of noise barriers under aerodynamic loads. • Potential for experimental and simulation studies on aerodynamic load of railway noise barriers. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
7. Release behavior of chloride from MSW landfill simulation reactors with different operation modes.
- Author
-
Long, Yuyang, Liu, Dongyun, Xu, Jing, Fang, Yuan, Du, Yao, and Shen, Dongsheng
- Subjects
- *
CHLORIDE ions , *LANDFILLS , *ANAEROBIC digestion , *LEACHATE , *ANAEROBIC reactors - Abstract
The chloride ion (Cl − ), a very common monatomic anion, has high ecological toxicity at high concentrations because of its non-biodegradability, and can easily migrate from landfill site into the surrounding environment. Four lab-scale landfill simulation reactors were established to investigate Cl − release behavior: the anaerobic landfill mode (R1), the semi-aerobic landfill mode (R2), the anaerobic landfill with leachate re-circulation mode (R3), and the semi-aerobic landfill with leachate re-circulation mode (R4). The landfill operation modes had a great influence on the release of Cl − . In 256 days, the cumulative release amounts of Cl − in the four reactors were 64.52, 132.07, 56.10, and 33.1 g for R1–R4, respectively. Once air enters anaerobic landfill, the leachate Cl − concentration may sharply increase. The highest leachate Cl − concentrations were 6.6 g L −1 in anaerobic reactor and 18 g L −1 in semi-aerobic reactor. However, the leachate re-circulation can maintain the release of Cl − at dynamic equilibrium state. Theoretically, the Cl − release behavior from anaerobic landfill with leachate re-circulation (R3) will be continuous. In contrast, under the other conditions, it can be anticipated to occur once the leachate recirculation stops (R1) or when the landfill encounters air incursion (R2 and R4). The semi-aerobic operation modes had significantly lower COD/Cl and NH 4 -N/Cl ratios than the anaerobic modes. This indicates that the Cl − pollution risk from semi-aerobic modes is lower than that from anaerobic modes. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
8. A review of concrete properties under the combined effect of fatigue and corrosion from a material perspective.
- Author
-
Liu, Dongyun, Wang, Chao, Gonzalez-Libreros, Jaime, Guo, Tong, Cao, Jie, Tu, Yongming, Elfgren, Lennart, and Sas, Gabriel
- Subjects
- *
DETERIORATION of concrete , *CORROSION fatigue , *FATIGUE cracks , *MATERIAL fatigue , *FATIGUE life , *FREEZE-thaw cycles , *POROSITY , *CONCRETE durability , *CONCRETE fatigue - Abstract
• There are coupling effects between fatigue and environmental corrosion actions. • Transportation models of harmful substances in the concrete accounting for fatigue damage. • Physical damage of freeze–thaw cycles and sulphate attack decrease fatigue life. • Multiple alternated simulation test is a potential way to study combined effect of fatigue and corrosion. When in use, reinforced concrete bridge structures not only experience high-frequency fatigue loading caused by passing vehicles, but also suffer from the effects of a corrosive environment. In addition to fatigue damage to reinforcement, long-term fatigue loading also causes concrete cracking and deterioration of pore structures, thereby accelerating the ingress of external corrosive substances and reducing concrete durability. Long-term exposure to a corrosive environment also reduces the performance of concrete and causes corrosion of reinforcement materials, affecting the fatigue performance of the structure. Therefore, there is a combined effect between fatigue loads and corrosion on concrete. This paper is a review of the current literature from a material perspective on the performance degradation of concrete under the combined action of fatigue loading and corrosion, that is, carbonation, chloride ion attack, freeze–thaw cycles, and sulphate attack. The paper includes (1) a description of a test method for examining the combined action of fatigue loading and corrosion, (2) a summary of performance degradation of concrete under the combined effect of fatigue loading and corrosion, and (3) an introduction to durability deterioration models considering fatigue damage, and fatigue models that can account for corrosion. Finally, potential future research on concrete under the combined effect of fatigue loading and corrosion is described. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
9. Effect of Enterobacter sp. EG16 on Selenium biofortification and speciation in pak choi (Brassica rapa ssp. chinensis).
- Author
-
Yuan, Yongqiang, Liu, Dongyun, Huang, Xiongfei, Wang, Shizhong, Qiu, Rongliang, Zhang, Zezhou, and Ming, Jiajia
- Subjects
- *
BIOFORTIFICATION , *BOK choy , *CHINESE cabbage , *CHEMICAL speciation , *PLANT biomass , *ENTEROBACTER , *EDIBLE plants - Abstract
• Mutual effects of Se and PGPR on Se-enriched biofortification were explored. • The combination of low-dose PGPR and exogenous Se promoted plant growth. • Se content in plant's edible parts significantly increased with rising doses of PGPR and Se. • SeMet, SeMeCys and SeCys2 were the main Se forms in plant's edible parts. • Optimal combinations of PGPR and Se for Se biofortification were obtained by Two-way ANOVA. Using plant growth promoting rhizobacteria (PGPR) to boost Se uptake and accumulation in crops is a promising recent approach to biofortification. Most studies, however, have focused on a certain dose of PGPR or Se, while the synergistic effects of simultaneously changing the concentration of both exogenous Se and PGPR on plant growth and Se bioaccumulation are rarely explored. In this study, the combined treatments of 0-2 mg L−1 Se and (3.83-11.3) ×107 CFU mL−1 PGPR strain Enterobacter sp. EG16 were used for the hydroponic experiments of pak choi (Brassica rapa) to investigate the mutual effects on plant growth and Se absorption. The growth of pak choi, in terms of plant height, number of leaves and root tips, was promoted by combining 7.65×107 CFU mL−1 EG16 and no more than 1 mg L−1 of Se. Growth was significantly inhibited when the concentration of EG16 was raised to 11.3×107 CFU mL−1. Chlorophyll content, superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) activities were also boosted under the same combination of Se and EG16 concentrations. In addition, the Se content of aboveground part and intact plants significantly increased with rising concentrations of EG16 and Se. Selenomethionine (SeMet), methylselenocysteine (SeMeCys) and selenocystine (SeCys2) were the main organo-Se compounds detected in pak choi, accounting for almost 90% when supplied with selenite. Among these compounds, SeMet accounted for a high proportion and SeCys2 for a relatively low percentage in most treatments. The two forms were inversely related, probably because the transformation was driven by EG16. On the other hand, the proportion of SeMeCys was significantly affected by different concentrations of exogenous Se and EG16. Selenate was also detected, indicative of selenite oxidation. In terms of both plant biomass and nutritional quality, the combined formulation of 1 mg L−1 Se and 7.65×107 CFU mL−1 of EG16 is a promising means of producing Se-enriched vegetables. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
10. The dominant factors and influence of urban characteristics on land surface temperature using random forest algorithm.
- Author
-
Wang, Qi, Wang, Xiaona, Zhou, Yong, Liu, Dongyun, and Wang, Haitao
- Subjects
LAND surface temperature ,RANDOM forest algorithms ,URBAN heat islands ,REGRESSION analysis ,URBAN planners - Abstract
• Multicellularity detection and random forest regression in the data analysis. • Partial dependence plots to reveal complex correlation. • BD is the most important factor influencing LST. • Social-economic factors are the least important to LST. • Non-linear relationship between urban characteristics and LST. Land surface temperature (LST) is influenced by a variety of factors. Relative studies have been carried out extensively in recent years. However, the intricate relationship has yet to be fully investigated. To assess the relative importance and interdependent effects of urban characteristics on LST, we chose the central part of Shanghai as the study area and used the random forest (RF) regression model to quantify 19 different variables on 3 different grid scales. Our results suggest that Building density (BD), percentage of water area (P_Water), percentage of vegetation area (P_Veg), building height (BH), distance to the Yangtze River (DIST), and mean patch area of green space (AREA_MN) are the 6 most important influencing factors, whereas socioeconomic factors such as point of interest (POI) and nighttime light data (NTL) are the least correlated to LST changes. Meanwhile, most of these 6 variables showed non-linear correlations with LST. In particular, the Yangtze River has a steady cooling effect up to 20 km, after which it declines rapidly and loses its effect at 25 km, and BH shows a fluctuated correlation with LST. This improved knowledge of the relationship between urban characteristics and LST will serve as a guide for future urban policymakers and planners. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
11. Freeze-thaw damage evaluation and model creation for concrete exposed to freeze–thaw cycles at early-age.
- Author
-
Liu, Dongyun, Tu, Yongming, Sas, Gabriel, and Elfgren, Lennart
- Subjects
- *
DAMAGE models , *FREEZE-thaw cycles , *CONCRETE , *HYDROTHERAPY , *PREDICTION models - Abstract
• Frost resistance of concrete exposed to E-FTCs worsen with the decrease in pre-curing time. • Subsequent curing conditions after E-FTCs significantly affects the later-age frost resistance of the damaged concrete. • There are good correlations between the parameters of the damage model and the pre-curing strengths of damaged concrete. • Prediction models of freeze–thaw damage suitable for damaged concrete exposed to E-FTCs are created. • For concrete expected to experience E-FTCs, adequate pre-curing strength and re-curing conditions are essential. Concrete subjected to freeze–thaw cycles action at early-age will suffer serious physical damage, resulting in degradation of the concrete's performance. The subsequent curing conditions after early-age freeze–thaw cycles (E-FTCs) are critical to the development of the properties of frost-damaged concrete. Four test environments were set up for this study, based on different numbers of E-FTCs and subsequent curing conditions. The later-age resistance to freeze–thaw of concrete exposed to E-FTCs was evaluated by analysing the influence of pre-curing times and curing conditions. Results show that the earlier the FTCs occur, the worse the later-age freeze–thaw resistance is. In particular, for the frost-damaged concrete with a pre-curing time of 18 h, its freeze–thaw resistance is significantly worse than that of other concretes that have a longer pre-curing time. The increase in the number of E-FTCs exacerbates the damage to early-age concrete, which causes the reduced later-age freeze–thaw resistance. Subsequent water curing can significantly improve the freeze–thaw resistance of damaged concrete, while air curing is the least effective. Based on previous freeze–thaw damage models, prediction models for concrete exposed to E-FTCs were created by using the test data obtained in this study. The critical pre-curing strengths which can ensure that the damaged concrete has satisfactory frost resistance at later-age were thus obtained. For concrete structures expected to experience E-FTCs, adequate pre-curing strength and good re-curing conditions are essential. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
12. Evaluation on later-age performance of concrete subjected to early-age freeze–thaw damage.
- Author
-
Tu, Yongming, Liu, Dongyun, Wang, Tongfang, and Yuan, Lei
- Subjects
- *
CONCRETE durability , *CONCRETE , *COMPRESSIVE strength , *HYDROTHERAPY , *CURING , *FREEZE-thaw cycles - Abstract
This research studies the influences of pre-curing time, the number and environment of early-age freeze–thaw damage (E-FTD) and later-age curing methods on later-age performance of concrete subjected to E-FTD. The concrete specimens with pre-curing time of 18 h, 24 h, 48 h and 72 h were subjected to four different E-FTD systems. Subsequently, three later-age curing methods were performed to the time of 28 days respectively and finally the later-age compressive strength, resistance to chloride penetration and freeze–thaw of concrete were evaluated. The results show that all three later-age performance indexes improve gradually as the pre-curing time prolongs. The damage of the salt freeze–thaw environment to early-age concrete is severer than that of the water freeze–thaw environment, resulting in the unsatisfactory later-age performance even with restorative curing. Among all later-age curing methods, the restoration effect of water curing on later-age performance is the best. Compared to the standard curing, the restoration effect of natural air curing on later-age compressive strength and resistance to chloride penetration of concrete is better, but that on resistance to freeze–thaw is worse. For the concrete with shorter pre-curing time, the recovery percentage of durability indexes, especially the resistance to freeze–thaw, is always lower than that of compressive strength. The pre-curing time should be prolonged appropriately for the early-age freeze–thaw damaged concrete with the requirement of durability. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
13. Dietary ethylenediamine dihydroiodide improves intestinal health in Cherry Valley ducks.
- Author
-
Xie, Yueqin, Li, Jing, Liu, Dongyun, Wu, Bing, Zhao, Hua, Liu, Guangmang, Tian, Gang, Cai, Jingyi, Wu, Caimei, Tang, Jiayong, and Jia, Gang
- Subjects
- *
ETHYLENEDIAMINE , *BUTYRIC acid , *SHORT-chain fatty acids , *INTESTINES , *THYROTROPIN receptors , *ANIMAL weaning , *DUCKS , *PROPIONIC acid - Abstract
This study investigated the effect of ethylenediamine dihydroiodide (EDDI) on the growth performance, thyroid function, immune function, intestinal development, intestinal permeability, intestinal barrier functions and microbial characteristics of Cherry Valley ducks. The results showed that the addition of EDDI significantly increased body weight, average daily gain, serum level of lymphocytes, basophils, triiodothyronine, thyroxine and thyrotropin, villus height, and villus height-to-crypt depth ratio, and significantly decreased crypt depth, diamine oxidase, serum D-Lactic acid of ducks (P < 0.05). EDDI also significantly up-regulated the mRNA expression of zonula occludens-1, zonula occludens-2, zonula occludens-3, mucin 2, secretory immunoglobulin A, interleukin-10 and avian β-defensin 2 in the jejunum and ileum (P < 0.05), and down-regulated the mRNA expression of occludin and interleukin-6 in the jejunum and ileum. Additionally, the addition of EDDI significantly increased cecal level of acetic acid, propionic acid, butyric acid (P < 0.05). Cecal microbiome analysis indicated that the addition of EDDI significantly increased the relative abundance of these microorganisms that can produce short-chain fatty acids, mainly including Actinobacteria, Verrucomicrobia, Clostridiales and Lactobacillales , and decreased the relative abundance of pathogenic bacteria Deferribactere. Interestingly, triiodothyronine and thyroxine levels were highly positively correlated with the relative abundance of Actinobacteria. These results revealed that the addition of EDDI could promote the growth and development of meat ducks by improving their thyroid function, immune function, intestinal development and intestinal barrier functions of ducks. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
14. Novel variants in ZP1, ZP2 and ZP3 associated with empty follicle syndrome and abnormal zona pellucida.
- Author
-
Sun, Liwei, Tong, Keya, Liu, Weiwei, Tian, Yin, Liu, Dongyun, Huang, Guoning, and Li, Jingyu
- Subjects
- *
ZONA pellucida , *MALE infertility , *INTRACYTOPLASMIC sperm injection , *FERTILIZATION in vitro , *FEMALE infertility , *GENETIC variation , *WESTERN immunoblotting , *IMMUNOFLUORESCENCE - Abstract
• Novel variants of ZP1, ZP2 and ZP3 are associated with female infertility. • In-vitro functional studies of ZP protein variants indicate pathogenesis. • The ZP3 variant was overcome with ICSI treatment. • Targeted genetic diagnosis of ZP genes may guide fertilization methods. Which genetic variants might explain the causes of empty follicle syndrome (EFS) and abnormal zona pellucida (ZP) and affect the success of treatment with assisted reproductive technologies (ART)? Whole-exome sequencing was performed in probands with EFS and abnormal ZP. Sanger sequencing was used for variant validation. Using HEK-293T cells, the effects of ZP1 and ZP2 variants on protein expression were explored by western blotting, and the effect of the ZP1 variant on protein location was investigated via immunofluorescence. The protein structure was also analysed to investigate the pathogenicity of variants. A homozygous nonsense variant in ZP1 (c.874C>T, p.Gln292*) was detected in a patient with EFS. A novel homozygous frameshift variant in ZP2 (c.836_837delAG, p.Glu279Valfs*6) and a novel heterozygous missense variant in ZP3 (c.1159G>A, p.Val387Met) were identified in two patients with ZP morphological abnormalities, respectively. Western blotting and immunofluorescence analysis showed that the ZP1 variant results in a premature stop codon, leading to the truncated ZP1 protein. The ZP2 variant, which is situated in the N-terminus, triggers the degradation of a premature termination protein. Additionally, the patient with the ZP3 variant achieved clinical pregnancy following intracytoplasmic sperm injection treatment. These findings expand the mutational spectrum of ZP1, ZP2 and ZP3 , and provide new evidence for genetic diagnosis of female infertility. The targeted genetic diagnosis of ZP genes is recommended to choose appropriate fertilization methods and improve success rates of treatment with ART. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
15. Genetic screening and analysis of TUBB8 variants in females seeking ART.
- Author
-
Lin, Tingting, Liu, Weiwei, Han, Wei, Tong, Keya, Xiang, Yezhou, Liao, Haiyuan, Chen, Ke, He, Yao, Liu, Dongyun, and Huang, Guoning
- Subjects
- *
GENETIC testing , *INFERTILITY , *EMBRYOLOGY , *FEMALE infertility , *MALE infertility , *GENETIC correlations , *CHROMOSOME analysis , *GENETIC variation - Abstract
Research question: More than 100 variants have been identified in the TUBB8 gene, which account for approximately 30% of infertile women with oocyte maturation defects. But what is the correlation between the highly phenotypic diversity and genetic variability? Are there other variants in TUBB8 related to female infertility? Design: TUBB8 resequencing was performed in 80 female subjects who were experiencing infertility and were seeking treatment with assisted reproductive technologies (ART), or had ever experienced ART failure due to oocyte maturation defects. All variants were evaluated with pedigree analysis, population frequency, in-silico analysis and molecular modelling. The effects of the variants on oocytes/arrested embryos were assessed by morphological observations, immunostaining, embryo biopsies and chromosome euploidy analysis. Results: Nine missense variants and two frameshift variants from an additional 15 families were identified, including four novel variants and seven previously reported recurrent variants. These TUBB8 variants were related to highly variable phenotypes, including abnormalities in oocyte maturation or morphology, fertilization failure, embryonic development abnormalities and implantation failure. Also further clarified were the incomplete penetrance of heterozygous p.E108K, the likely benign significance of heterozygous p.A313V and the clinical effect of a novel variant of p.R380C. Conclusions: This study significantly expands the variant spectrum of the TUBB8 gene and, together with the available findings on TUBB8 variants and female infertility, will potentially facilitate the genetic counselling of infertile women in future. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
16. Hydrochar derived from green waste by microwave hydrothermal carbonization.
- Author
-
Shao, Yuchao, Long, Yuyang, Wang, Hengyi, Liu, Dongyun, Shen, Dongsheng, and Chen, Ting
- Subjects
- *
HYDROTHERMAL carbonization , *BIOMASS conversion , *FUEL , *RENEWABLE energy standards , *BIOCHAR - Abstract
Abstract Green waste (GW), rich in cellulose and hemicellulose, is a valuable resource. Developing alternative sustainable technologies to utilize GW is attracting increasing attention. In this study, microwave hydrothermal carbonization (MHTC) process parameters including holding temperature, holding time, and liquid-to-solid ratio were optimized by a response surface design to tailor the properties of hydrochar. The hydrochar characteristic was mainly evaluated by the calorific value. The results showed that the highest hydrochar calorific value (∼23.01 MJ kg−1) could be observed at a holding temperature of 190 °C, a holding time of 1 h and liquid-to-solid ratio of 8:1. Correspondingly, the hydrochar yield ranged from 50.40% to 76.80%. The economic evaluation of hydrochar was also done in this work. These results show that the GW-derived hydrochar warrants further investigations as a fuel source and as an adsorbent material. Graphical abstract Image 1 Highlights • Green waste was mainly transformed to hydrochar by microwave hydrothermal technology. • Hydrochar is a good fuel with high calorific value and considerable yield. • Microwave hydrothermal carbonization conditions were optimized. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
17. Topology reconstruction from FAU to MWW structure.
- Author
-
Shi, Yanchun, Xing, Enhui, Gao, Xiuzhi, Liu, Dongyun, Xie, Wenhua, Zhang, Fengmei, Mu, Xuhong, and Shu, Xingtian
- Subjects
- *
CRYSTAL structure , *TOPOLOGY , *AZEPINES , *INTERMEDIATES (Chemistry) , *SODIUM hydroxide , *SILICA , *NUCLEAR magnetic resonance spectroscopy - Abstract
Topology reconstruction from FAU to MWW structure has been explored in the presence of hexamethyleneimine, NaOH and SiO 2 . The samples prepared at different crystallization stages were characterized by XRD, SEM, TEM, and 29 Si/ 27 Al/ 13 C MAS NMR to investigate the intermediates in the topology reconstruction from FAU to MWW structure. It has been demonstrated for the first time that topology reconstruction from FAU to MWW structure was caused by the “synergism” of hexamethyleneimine, NaOH, and SiO 2 , which was supported by transformation from FAU to SOD structure without SiO 2 and the preservation of FAU structure without NaOH. It is also clearly proved that FAU structure was directly reconstructed into MWW structure by the combination of all above mentioned characterizations, especially XRD and 29 Si/ 27 Al MAS NMR. MWW structure zeolite was generated at the consumption of FAU structure zeolite, which is worthy to be noticed that solid silica gel was completely consumed at the end of topology reconstruction. As shown in SEM and TEM images, MWW structure zeolite was reconstructed gradually from exterior to interior of FAU structure zeolite, which was clearly observed by the FAU–MWW co-existing zeolites as intermediate states. The reconstructed MWW structure zeolite has high relative crystallinity. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.