Search

Treating hazardous landfill leachate poses significant environmental challenges due to its complex nature. In this study, we propose a novel approach for enhancing the anaerobic digestion of landfill leachate using silver nanoparticles (Ag NPs) conjugated with eco-friendly green silica nanoparticles (Si NPs). The synthesized Si NPs and Ag@Si NPs were characterized using various analytical techniques, including transmission electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. The anaerobic digestion performance of Si NPs and Ag@Si NPs was tested by treating landfill leachate samples with 50 mg/L of each NP. The results demonstrated an enhancement in the biogas production rate compared to the control phase without the nanocomposite, as the biogas production increased by 14% and 37% using Si NPs and Ag@Si NPs. Ag@Si NPs effectively promoted the degradation of organic pollutants in the leachate, regarding chemical oxygen demand (COD) and volatile solids (VS) by 58% and 65%. Furthermore, microbial analysis revealed that Ag@Si NPs enhanced the activity of microbial species responsible for the methanogenic process. Overall, incorporating AgNPs conjugated with eco-friendly green Si NPs represents a sustainable and efficient approach for enhancing the anaerobic digestion of landfill leachate., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The increasing depletion of oil resources and the environmental problems caused by using much fossil energy in the rapid development of society. The bio-oil becomes a promising alternative energy source to fossil. However, bio-oil cannot be directly utilized, owing to its high proportion of oxygenated compounds with low calorific value and poor thermal stability. Catalytic hydrodeoxygenation (HDO) is one of the most effective methods for refining oxygenated compounds from bio-oil. HDO catalysts play a crucial role in the HDO reaction. This review emphasizes the description of the main processing of HDO and various catalytic systems for bio-oil, including noble/non-noble metal catalysts, porous organic polymer catalysts, and polar solvents. A discussion based on recent studies and evaluations of different catalytic materials and mechanisms is considered. Finally, the challenges and future opportunities for the development of catalytic hydrodeoxygenation for bio-oil upgradation are looked forward., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Lignocellulose can be converted into biofuel or functional materials to achieve high value-added utilization. Biomass utilization process is complex and multi-dimensional. This paper focuses on the biomass conversion reaction conditions, the preparation of biomass-based functional materials, the combination of biomass conversion and traditional wet chemistry, molecular simulation and process simulation. This paper analyzes the mechanism, advantages and disadvantages of important machine learning (ML) methods. The application examples of ML in different aspects of high value utilization of lignocellulose are summarized in detail. The challenges and future prospects of ML in this field are analyzed., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier Ltd.)

Biodiesel is a typical renewable energy and the previous transesterification processes for biodiesel production mainly focus on thermocatalytic methods. In this paper, the ball-milling process was investigated into the biodiesel production under Kraft lignin activated carbon stabilized K 2 CO 3 . Biodiesel yield increased to 66 % after only 5 min and reached 100 % within 25 min under optimal ball-milling conditions (0.5 g of the catalyst; methanol/oil molar ratio 18:1; 195 g of ball-mill beads; 1400 rpm; 25 °C). The power demand between the thermocatalytic method and the ball-milling method was also compared. Based on the computation, the ball-milling method has lower power demand than the traditional method (38 vs 201 kWh·mol -1 ). Therefore, the ball-milling method is an effective and economical process for biodiesel production., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Agricultural waste residues (agro-waste) are the source of carbohydrates that generally go in vain or remain unused despite their interesting morphological, chemical, and mechanical properties. With rapid urbanization, there is a need to valorize this waste due to limited non-renewable resources. Utilizing agro-waste also prevents the problems like burning and inefficient disposal that otherwise lead to immense pollution worldwide. In addition, conversion of biomass to value-added products like earthen cups, weaving baskets, and bricks is equally beneficial for the rural population as it provides secondary income, creates jobs, and improves rural people's lifestyles. This review paper will discuss an overview of different applications utilizing agro-waste residues. In particular, agro-wastes used as construction material, bio-fertilizers, pulp and paper products, packaging products, tableware, heating applications, biocomposites, nano-cellulosic materials, soil stabilizers, bioplastics, fire-retardant additive, dye removal, and biofuels will be summarized. Finally, several commercially available agro-waste products will also be discussed, emphasizing the circular economy., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

From energy perspective, with abundant polysaccharides (45-85%), the renewable lignocellulosic is recognized as the 2nd generation feedstock for bioethanol and bio-based products production. Enzymatic hydrolysis is a critical pathway to yield fermentable monosaccharides from pretreated substrates of lignocellulose. Nevertheless, the lignin presence in lignocellulosic substrates leads to the low substrate enzymatic digestibility ascribed to the nonproductive adsorption. It has been reported that the water-soluble lignin (low molecular weight, sulfonated/sulfomethylated and graft polymer) enhance the rate of enzymatic digestibility, however, the catalytic mechanism of lignin-enzyme interaction remains elusive. In this review, optimization strategies for enzymatic hydrolysis based on the lignin structural modification, enzyme engineering, and different additives are critically reviewed. Lignin-enzyme interaction mechanism is also discussed (lignin and various cellulases). In addition, the mathematical models and simulation of lignin, cellulose and enzyme aims for promoting an integrated biomass-conversion process for sustainable production of value-added biofuels., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Members of the genus Populus (i.e., cottonwood, hybrid poplar) represent a promising source of lignocellulosic biomass for biofuels. However, one of the major factors negatively affecting poplar's efficient conversion to biofuel is the inherent recalcitrance to enzymatic saccharification due to cell wall components such as lignin. To this effect, there have been efforts to modify gene expression to reduce biomass recalcitrance by changing cell wall properties. Here, we review recent genetic modifications of poplar that led to change cell wall properties and the resulting effects on subsequent pretreatment efficacy and saccharification. Although genetic engineering's impacts on cell wall properties are not fully predictable, recent studies have shown promising improvement in the biological conversion of transgenic poplar to biofuels., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Waste biomass derived heterogeneous catalyst is an excellent alternative to chemically synthesized catalysts. In this work, calcined Tectona grandis leaves were proposed as an eco-friendly, renewable and low cost heterogeneous base catalyst. The prepared catalyst was examined by FTIR, XRD, XPS, SEM, EDX, TEM, TGA, BET and Hammett indicator test. The catalyst has an appealing nature towards various chemical transformations due to its basic surface sites provided by alkali and alkaline earth metals. The efficiency of the catalyst was successfully investigated by its application in biodiesel production. The products were confirmed by 1 H and 13 C NMR. 100% FAME conversion was attained using a catalyst loading of 2.5 wt% under optimized reaction parameters. The catalyst was further explored for Knoevenagel condensation reaction, in which it showed its effectiveness and recyclability towards the formation of benzylidenemalononitrile derivatives of aryl aldehydes. Thus, it is a potential 'green catalyst' derived from waste biomass without any addition of chemicals that can replace the industrial base catalysts used for biodiesel production and Knoevenagel reaction and makes the protocol environmentally benign., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Despite the enormous potential shown by recent biorefineries, the current bioeconomy still encounters multifaceted challenges. To develop a sustainable biorefinery in the future, multidisciplinary research will be essential to tackle technical difficulties. Herein, we leveraged a known plant genetic engineering approach that results in aldehyde-rich lignin via down-regulation of cinnamyl alcohol dehydrogenase ( CAD ) and disruption of monolignol biosynthesis. We also report on renewable deep eutectic solvents (DESs) synthesized from phenolic aldehydes that can be obtained from CAD mutant biomass. The transgenic Arabidopsis thaliana CAD mutant was pretreated with the DESs and showed a twofold increase in the yield of fermentable sugars compared with wild type (WT) upon enzymatic saccharification. Integrated use of low-recalcitrance engineered biomass, characterized by its aldehyde-type lignin subunits, in combination with a DES-based pretreatment, was found to be an effective approach for producing a high yield of sugars typically used for cellulosic biofuels and biobased chemicals. This study demonstrates that integration of renewable DES with plant genetic engineering is a promising strategy in developing a closed-loop process., Competing Interests: The authors declare no conflict of interest.

Culture contamination, end-product toxicity, and energy efficient product recovery are long-standing bioprocess challenges. To solve these problems, we propose a high-pressure fermentation strategy, coupled with in situ extraction using the abundant and renewable solvent supercritical carbon dioxide (scCO 2 ), which is also known for its broad microbial lethality. Towards this goal, we report the domestication and engineering of a scCO 2 -tolerant strain of Bacillus megaterium, previously isolated from formation waters from the McElmo Dome CO 2 field, to produce branched alcohols that have potential use as biofuels. After establishing induced-expression under scCO 2 , isobutanol production from 2-ketoisovalerate is observed with greater than 40% yield with co-produced isopentanol. Finally, we present a process model to compare the energy required for our process to other in situ extraction methods, such as gas stripping, finding scCO 2 extraction to be potentially competitive, if not superior.

Consolidated bioprocessing (CBP) by micro-organisms is desired for efficient conversion of lignocellulosic biomass to bioethanol fuels. Potential candidates have been discovered, including cellulolytic bacteria and filamentous fungi. Genetic and metabolic manipulation of these organisms further promotes their fermentation capacities and the ethanol tolerance. In addition, Saccharomyces cerevisiae and several other yeasts were genetically modified to express recombinant cellulases in media or display them on the cell surface for CBP of cellulose. To compensate the insufficient capacity of a single strain, various microbial consortia have also been developed. In this article, we reviewed the recent advances in CBP microbes and focused on the efforts in strain improvement employing genetic engineering.

To overcome the bottlenecks of high cost and low production yields that restrict the commercial production of microalgae biodiesel, the use of xylose was evaluate by Scenedesmus quadricauda FACHB-1297, which was shown to be capable of mixotrophic and heterotrophic growth and lipid production on xylose, rich in the waste streams from pulp and paper industry, with increases in lipid productivities of 35.8-fold (mixotrophic) and 9.2-fold (heterotrophic) in comparison to photoautotrophic lipid yields. Five doses of xylose were tested to determine the effects and mechanisms of the carbon source on microalgae in mixotrophic mode. At the optimal xylose dosage of 4 g/L, the highest lipid content (38.61%) and productivity (139.55 mg/L/d) were achieved besides maximum biomass productivity (361.4 mg/L/d), nutrient removal efficiency of 68.4% (nitrogen), 97.2% (phosphorus) and 35.2% (xylose). Those indicated that S. quadricauda FACHB-1297 was suitable for further development of using xylose from certain waste streams for biofuel production., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The thermal degradation behaviour and kinetic parameter of non-catalytic and catalytic pyrolysis of rice husk (RH) using rice hull ash (RHA) as catalyst were investigated using thermogravimetric analysis at four different heating rates of 10, 20, 50 and 100 K/min. Four different iso conversional kinetic models such as Kissinger, Friedman, Kissinger-Akahira-Sunose (KAS) and Ozawa-Flynn-Wall (OFW) were applied in this study to calculate the activation energy (E A ) and pre-exponential value (A) of the system. The E A of non-catalytic and catalytic pyrolysis was found to be in the range of 152-190 kJ/mol and 146-153 kJ/mol, respectively. The results showed that the catalytic pyrolysis of RH had resulted in a lower E A as compared to non-catalytic pyrolysis of RH and other biomass in literature. Furthermore, the high Gibb's free energy obtained in RH implied that it has the potential to serve as a source of bioenergy production., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The pyrolysis behaviors of the three major organic components of eucalyptus alkaline peroxide mechanical pulping (APMP) spent liquor including alkali lignin (AL), lignin-carbohydrate complexes (LCC), and polysaccharide (PLS) were studied with emphasis on the effect and contributions of components on the overall pyrolysates of APMP spent liquor solid (ASLS). Profound differences on product properties from each component pyrolysis were illustrated. The results indicated that the bio-oil during ASLS pyrolysis was mainly attributed to AL, while the bio-gas and char were mostly affected by PLS. Small molecule hydrocarbons released during ASLS pyrolysis mainly came from AL and LCC, and CO and CO 2 mainly produced from PLS. As for bio-oils, AL generated the largest proportion of monomeric phenols and aromatic hydrocarbons (AHs), while PLS and LCC mainly contributed to the production of ketones, furans and acids. The correlation shown here is of interest for further studies on pulping spent liquor grading utilization., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A methane production system with continuous stirred-tank reactor, rumen liquid as inoculate microorganisms, and paper mill excess sludge (PES) as feedstock was studied. The work mainly focused on revealing the effect of feedstock concentration on the biogas production, which was seldom reported previously for the current system. The optimal fermentation conditions were found as follows: pH = 7, T = 39 ± 1 °C, sludge retention time is 20 days, sludge with total solids (TS) are 1, 2, 3.5, 5, 10, and 13% in weight. Daily gas yields were measured, and biogas compositions were analyzed by gas chromatograph. Under such conditions, the optimum input TS was 10 wt%, and the biogas yield and volume gas productivity were 280.2 mL/g·TS and 1188.4 mL L -1 ·d -1 , respectively. The proportions of CH 4 and CO 2 in the biogas were 65.1 and 34.2%. The CH 4 yield reached 182.7 mL/g VS (volatile suspended solid), which was higher than previously reported values. The findings of this work have a significant effect on promoting the application of digesting PES by rumen microorganisms and further identified the technical parameter.

The Cladophora glomerata (C. glomerata) is a kind of widely distributed macroalgae in the freshwater ecosystems. It primarily consists of carbohydrates that can be converted into biofuel by pyrolysis. In this study, thermogravimetric analysis (TGA) was used to investigate the thermal behavior and kinetics of C. glomerata during the pyrolysis process. The results showed that heating rates slightly affect the decomposition properties of C. glomerata; with the heating rates increasing, the maximum peak of weight loss rate shifted to higher temperatures. The activation energies of C. glomerata pyrolysis reaction were 244.25 and 238.07kJ/mol, respectively, as calculated by Friedman and Kissinger-Akahira-Sunose (KAS) methods. The pre-exponential factor and reaction order were determined by Coats-Redfern model, and applied to simulate the pyrolysis process of C. glomerata. The model calculated data and experimental data were consistent. This study could provide theoretical supports for designing C. glomerata conversion processes., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

This paper critically reviews the impacts of supplementing trace elements on the anaerobic digestion performance. The in-depth knowledge of trace elements as micronutrients and metalloenzyme components justifies trace element supplementation into the anaerobic digestion system. Most of the earlier studies reported that trace elements addition at (sub)optimum dosages had positive impacts mainly longer term on digester stability with greater organic matter degradation, low volatile fatty acids (VFA) concentration and higher biogas production. However, these positive impacts and element requirements are not fully understood, they are explained on a case to case basis because of the great variance of the anaerobic digestion operation. Iron (Fe), nickel (Ni) and cobalt (Co) are the most studied and desirable elements. The right combination of multi-elements supplementation can have greater positive impact. This measure is highly recommended, especially for the mono-digestion of micronutrient-deficient substrates. The future research should consider the aspect of trace element bioavailability., (Copyright © 2016. Published by Elsevier Ltd.)

To understand the structural changes of lignin after soda-AQ and kraft pretreatment, milled straw lignin, black liquor lignin and residual lignin extracted from wheat straw were characterized by FT-IR, UV, GPC and NMR. The results showed that the main lignin linkages were β-aryl ether substructures (β-O-4'), followed by phenylcoumaran (β-5') and resinol (β-β') substructures, while minor content of spirodienone (β-1'), dibenzodioxocin (5-5') and α,β-diaryl ether linkages were detected as well. After pretreatment, most lignin inter-units and lignin-carbohydrate complex (LCC) linkages were degraded and dissolved in black liquor, with minor amount left in residual pretreated biomass. In addition, through quantitative (13)C and 2D-HSQC NMR spectral analysis, lignin and LCC were found to be more degraded after kraft pretreatment than soda-AQ pretreatment. Furthermore, the subsequent enzymatic hydrolysis results showed that more cellulose in wheat straw was converted to glucose after kraft pretreatment, indicating that LCC linkages were important in the enzymatic hydrolysis process., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Fines concentration harms paper machine runability and output quality in recovered paper processing, hence, their extraction would be fundamentally beneficial. In this study, separated fines from an industrial recycled fiber pulp (RFP) were characterized and evaluated for their potential biogas yields with a focus on understanding the role of varying lignin and ash contents. Further, these results were compared with biogas yields from conventional chemical and mechanical pulps. Overall, methane yields of fines from mechanical pulps (21-28mL/gVS) and RFP (127mL/gVS) are relatively low compared to the high methane yields of 375mL/gVS from the chemical pulp fines. However, it was shown that the high ash content in RFP fines (up to 50%) did not negatively influence overall yield, rather, it was the presence of slowly biodegrading lignin-rich fiber fines., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Sulfite pretreatment to overcome the recalcitrance of lignocelluloses (SPORL) was applied to poplar NE222 chips in a range of chemical loadings, temperatures, and times. The combined hydrolysis factor (CHF) as a pretreatment severity accurately predicted xylan dissolution by SPORL. Good correlations between CHF and pretreated solids enzymatic digestibility, sugar yield, and the formations of furfural and acetic acid were obtained. Therefore, CHF was used to balance sugar yield with the formation of fermentation inhibitors for high titer ethanol production without detoxification. The results indicated that optimal sugar yield can be achieved at CHF=3.1, however, fermentation using un-detoxified whole slurries of NE222 pretreated at different severities by SPORL indicated CHF≈2 produced best results. An ethanol titer of 41 g/L was achieved at total solids of approximately 20 wt% without detoxification with a low cellulase loading of 15 FPU/g glucan (27 mL/kg untreated wood)., (Published by Elsevier Ltd.)

This study investigated the thermal decomposition characteristics and pyrolytic products of anaerobic digested rice straw (ADRS) by thermogravimetric (TG) and pyrolysis-gas chromatograph/mass spectrometry (Py-GC/MS) analysis. Compared with the raw rice straw (RS), the thermal decomposition temperature of ADRS was shifted to higher temperature zone and the second decomposition zone of cellulose (Toffset(c)-Tpeak) became narrower (14 °C less), which indicated that the composition of rice straw were changed significantly by the anaerobic digestion pretreatment. Py-GC/MS analysis showed that the quality of the bio-oil and the selectivity of pyrolytic products could be obviously improved by anaerobic digestion. The total yields of alcohols, acids, aldehydes, furans, anhydrosugars, and ketones pyrolysis substances decreased, while the yield of phenols increased. The yield of 4-Vinylphenol (4-VP) increased from 29.33%, 8.21% and 5.76% to 34.93%, 12.46% and 7.68% at 330, 450 and 650 °C, respectively, after anaerobic digestion., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

This study demonstrated at the pilot-scale (50 kg) use of Douglas-fir forest harvest residue, an underutilized forest biomass, for the production of high titer and high yield bioethanol using sulfite chemistry without solid-liquor separation and detoxification. Sulfite Pretreatment to Overcome the Recalcitrance of Lignocelluloses (SPORL) was directly applied to the ground forest harvest residue with no further mechanical size reduction, at a low temperature of 145°C and calcium bisulfite or total SO2 loadings of only 6.5 or 6.6 wt% on oven dry forest residue, respectively. The low temperature pretreatment facilitated high solids fermentation of the un-detoxified pretreated whole slurry. An ethanol yield of 282 L/tonne, equivalent to 70% theoretical, with a titer of 42 g/L was achieved. SPORL solubilized approximately 45% of the wood lignin as directly marketable lignosulfonate with properties equivalent to or better than a commercial lignosulfonate, important to improve the economics of biofuel production., (Published by Elsevier Ltd.)