Search

Food safety and authenticity analysis play a pivotal role in guaranteeing food quality, safeguarding public health, and upholding consumer trust. In recent years, significant social progress has presented fresh challenges in the realm of food analysis, underscoring the imperative requirement to devise innovative and expedient approaches for conducting on-site assessments. Consequently, cellulose paper-based devices (PADs) have come into the spotlight due to their characteristics of microchannels and inherent capillary action. This review summarizes the recent advances in cellulose PADs in various food products, comprising various fabrication strategies, detection methods such as mass spectrometry and multi-mode detection, sampling and processing considerations, as well as applications in screening food safety factors and assessing food authenticity developed in the past 3 years. According to the above studies, cellulose PADs face challenges such as limited sample processing, inadequate multiplexing capabilities, and the requirement for workflow integration, while emerging innovations, comprising the use of simplified sample pretreatment techniques, the integration of advanced nanomaterials, and advanced instruments such as portable mass spectrometer and the innovation of multimodal detection methods, offer potential solutions and are highlighted as promising directions. This review underscores the significant potential of cellulose PADs in facilitating decentralized, cost-effective, and simplified testing methodologies to maintain food safety standards. With the progression of interdisciplinary research, cellulose PADs are expected to become essential platforms for on-site food safety and authentication analysis, thereby significantly enhancing global food safety for consumers., (© 2024 Institute of Food Technologists®.)

The success of polymerase chain reaction (PCR) depends on the quality of deoxyribonucleic acid (DNA) templates. This study developed a cost-effective and eco-friendly DNA extraction system utilizing poly(3,4-dihydroxyphenylalanine)-modified cellulose paper (polyDOPA@paper). PolyDOPA@paper was prepared by oxidatively self-polymerizing DOPA under weak alkaline conditions and utilizing the adhesive property of polyDOPA on different materials. Compared to the uncoated cellulose paper, polyDOPA coating significantly enhances DNA adsorption owing to its abundant amino, carboxyl, and hydroxyl moieties. The DNA extraction mechanism using polyDOPA@paper was discussed. The maximum adsorption capacity of polyDOPA@paper for DNA was 20.7 μg cm -2 . Moreover, an automated extraction system was designed and fabricated using 3D printing technology. The device simplifies the operation and ensures the reproducibility and consistency of the results. More importantly, it eliminates the need for specialized training of operators. The feasibility of the polyDOPA@paper-based automated extraction system was evaluated by quantitatively detecting Escherichia coli in spiked milk samples via a real-time PCR. The detection limit was 10 2 cfu mL -1 . The results suggest that the system would have significant potential in detecting pathogens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Due to the common contamination of multiple mycotoxins in food, which results in stronger toxicity, it is particularly important to simultaneously test for various mycotoxins for the protection of human health. In this study, a disposable immunosensor array with low-cost was designed and fabricated using cellulose paper, polydimethylsiloxane (PDMS), and semiconducting single-walled carbon nanotubes (s-SWCNTs), which was modified with specific antibodies for mycotoxins AFB1 and FB1 detection. The strategy for fabricating the immunosensor array with two individual channels involved a two-step protocol starting with the form of two kinds of carbon films by depositing single-wall carbon nanotubes (SWCNTs) and s-SWCNTs on the cellulose paper as the conductive wire and sensing element, followed by the assembly of chemiresistive biosensor with SWCNTs strip as the wire and s-SWCNTs as the sensing element. After immobilizing AFB1-bovine serum albumin (AFB1-BSA) and FB1-bovine serum albumin (FB1-BSA) separately on the different sensing regions, the formation of mycotoxin-BSA-antibody immunocomplexes transfers to electrochemical signal, which would change with the different concentrations of free mycotoxins. Under optimal conditions, the immunosensor array achieved a limit of detection (LOD) of 0.46 pg/mL for AFB1 and 0.34 pg/mL for FB1 within a wide dynamic range from 1 pg/mL to 20 ng/mL. Furthermore, the AFB1 and FB1 spiked in the ground corn and wheat extracts were detected with satisfactory recoveries, demonstrating the excellent practicality of this established method for simultaneous detection of mycotoxins., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Developing plastic/fluorine/silicon-free and degradable water/oil-resistant coatings for paper-based packaging materials to replace disposable plastic products is a very effective way to solve the problem of 'white pollution' or microplastics pollution. A novel water/oil-resistant coating was developed by alkyl ketene dimer (AKD)-based Pickering emulsion and chitosan in this work. Cellulose nanofibrils (CNF) were used as a stabilizing solid for AKD emulsion, with the addition of chitosan as an oil-resistance agent. The coating provides excellent hydrophobicity, water/oil resistance as well as good barrier properties. The water contact angle was as high as 130° and the minimum Cobb60 value was 5.7 g/m 2 , which was attributed to the hydrophobicity of AKD. In addition, the kit rating reached maximum 12/12 at coating weight of 8.26 g/m 2 and the water vapor transmittance rate (WVTR) was reduced to 153.4 g/(m 2 ⋅day) at the coating weight of 10.50 g/m 2 . The tensile strength of the paper was increased from 28.1 to 43.6 MPa after coating. Overall, this coating can effectively improve the performance of paper-based materials, which may play an important role in the process of replacing disposable plastic packaging with paper-based materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The aging of paper seriously threatens the service life of cultural heritage documents. Bacterial cellulose (BC), which has a good fiber aspect ratio and is rich in hydroxyl groups, is suitable for strengthening aged paper. However, a single BC added was not ideal for paper restoration, since only strengthening was not able to resist the persistent acidification of ancient book. In this work, BC was functionalized by 3-aminopropyltriethoxysilane (APTES) to develop the interface bonding with aged paper. Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR) and elemental analysis identified the successful amino-silanization of BC. The modification parameters were optimized as the concentration of APTES of 5 wt%, the reaction time of 4 h, and the reaction temperature of 80 °C based on a considerable improvement in the strength properties without obvious appearance impact on reinforced papers. Moreover, the pH value of the repaired paper was achieved at 8.03, ensuring the stability of the anti-aging effect. The results confirmed that APTES-BC had great potential applications in ancient books conservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. All the authors listed have approved the manuscript enclosed., (Copyright © 2024. Published by Elsevier B.V.)

Electromagnetic hydrogels have attracted significant attention due to their vast potential in soft robotics, biomedical engineering, and energy harvesting. To facilitate future commercialization via large-scale industrial processes, we present a facile concept that utilizes the specialized knowledge of papermaking to fabricate hydrogels with multifunctional electromagnetic properties. The principles of papermaking wet end chemistry, which involves the handling of interactions among cellulosic fibers, fines, polymeric additives, and other components in aqueous systems, serves as a key foundation for this concept. Notably, based on these principles, the versatile use of chemical additives in combination with cellulosic materials enables the tailored design of various products. Our methodology exploits the unique hierarchically pitted and hollow tube-like structures of papermaking grade cellulosic fibers with discernible pits, enabling the incorporation of magnetite nanoparticles through lumen loading. By combining microscale softwood-derived cellulosic fibers with additives, we achieve dynamic covalent interactions that transform the cellulosic fiber slurry into an impressive hydrogel. The cellulosic fibers act as a skeleton, providing structural support within the hydrogel framework and facilitating the dispersion of nanoparticles. In accordance with our concept, the typical hydrogel exhibits combined attributes, including electrical conductivity, self-healing properties, pH responsiveness, and dynamic rheologic behavior. Our approach not only yields hydrogels with interesting properties but also aligns with the forefront of advanced cellulosic material applications. These materials hold the promise in remote strain sensing devices, electromagnetic navigation systems, contactless toys, and flexible electronic devices. The concept and findings of the current work may shed light on materials innovation based on traditional pulp and paper processes. Furthermore, the facile processes involved in hydrogel formation can serve as valuable tools for chemistry and materials education, providing easy demonstrations of principles for university students at different levels., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Cellulose nanopaper is a material structure that possesses high mechanical performance and is widely regarded as a promising 2D reinforcement for polymer matrix composites. This work explores the use of low grammage bacterial cellulose (BC) nanopaper as reinforcement for poly(acrylated urethane) interlayer adhesive to increase the impact performance of multilayer acrylic composites. The BC nanopaper is impregnated with an acrylated urethane resin and laminated between acrylic sheets to create BC/acrylic composites consisting of one, three, and five layers of BC nanopaper-reinforced poly(acrylated urethane) interlayer adhesive(s). Both the poly(acrylated urethane)-filled BC nanopaper interlayer adhesive and the resulting laminated acrylic composites are optically transparent. The incorporation of BC nanopaper into the poly(acrylated urethane) interlayer adhesive improves the tensile modulus by eightfold and the single-edge notched fracture toughness by 60% compared to neat poly(acrylated urethane). It is also found that using poly(acrylated urethane)-filled BC nanopaper interlayer adhesive proves beneficial to the impact properties of the resulting laminated acrylic composites. In Charpy impact testing, the impact strength of the multilayer acrylic composites increases by up to 130% compared to the "gold-standard" impact-modified monolithic acrylic, with a BC loading of only 1.6 wt%., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Counterfeiting has caused great concern all over the world. What's more, the fluorescent materials play an important role in technological research and development for high-security. In this work, lead-metal-organic framework (Pb-MOF) and perovskite (MAPbBr 3 ) were used in papers to achieving fluorescence counterfeiting. Pb-MOF, as the template or precursor of MAPbBr 3 , were in-situ generated on the surface of cellulose fibers (CFs) to preparing into hand sheets (Pb-MOF@CFs). Through the analysis of experimental results, it was found that ligands, reaction systems, addition sequences of drugs, time, etc. would affect the deposition of Pb-MOF on the surface of CFs. Using CH 3 NH 3 Br (MABr) as the anti-counterfeiting ink to write on Pb-MOF@CFs, the orange writing leaped across the paper, which caused by Pb in Pb-MOF chemically reacting with MABr forming MAPbBr 3 . The orange writing displayed green fluorescence under 365 nm ultraviolet lamp excitation. The orange writing with green fluorescence could be extinguished and reconstructed, which had promise for reuse. In addition, fluorescent security papers (MAPbBr 3 @Pb-MOFs@CFs) were prepared by immersing Pb-MOF@CFs in MABr solution. The fluorescence of MAPbBr 3 @Pb-MOFs@CFs opened when the surface of it was scraped under 365 nm ultraviolet lamp. This unique fluorescence property was very important in improving the security of products. Consequently, the ongoing research on perovskite and MOFs materials is of great significance., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Sustainable strategies to improve the water resistance of cellulose paper are actively sought. In this work, polymeric microspheres (PMs), prepared through emulsion polymerization of cellulose nanofibers stabilized rubber seed oil-derived monomer, were investigated as coatings on corrugated medium paper (CMP). After infiltrating porous paper with PMs, the water-resistant corrugated papers (WRCP n ) with enhanced mechanical properties were obtained. When 30 wt% PMs were introduced, WRCP 30 turned out to be highly compacted with an increased water contact angle of 106.3° and a low water vapor transmission rate of 81 g/(m 2 d) at 23 °C. Meanwhile, the tensile strength of WRCP 30 increased to 22.2 MPa, a 4-fold increase from CMP. When tested in a well-hydrated state, 71% of its mechanical strength in the dry state was maintained. Even with a low content of 10 wt% PMs, WRCP 10 also exhibited stable tensile strength and water wettability during the cyclic soaking-drying process. Thus, the plant oil based sustainable emulsion polymers provide a convenient route for enhancing the overall performance of cellulose paper., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The demand for paper-based packaging materials as an alternative to incumbent disposable petroleum-derived polymers for food packaging applications is ever-growing. However, typical paper-based formats are not suitable for use in unconventional applications due to inherent limitations (e.g., excessive hydrophilicity, lack antimicrobial ability), and accordingly, enabling new capabilities is necessity. Herein, a simple and environmentally friendly strategy was proposed to introduce antimicrobial and hydrophobic functions to cellulose paper through successive chemical grafting of 3-aminopropyltriethoxysilane (APS) and cinnamaldehyde (CA). The results revealed that cellulose paper not only showed long-term antibacterial effect on different bacteria, but also inhibited a wide range of fungi. Encouragingly, the modified paper, which is fluorine-free, displays a high contact angle of 119.7°. Thus, even in the wet state, the modified paper can still maintain good mechanical strength. Meanwhile, the multifunctional composite papers have excellent biocompatibility and biodegradability. Compared with ordinary cellulose paper, multifunctional composite paper can effectively prolong the shelf life of strawberries. Therefore, the multifunctional composite paper represents good application potential as a fruit packaging material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Oyster Farming is one of important fisheries and aquaculture industries in Taiwan. Each year, approximately 4000-5000 tons of discarded bamboo scaffolding (BS) used in oyster farming, are generated, so the treatment and utilization of BS should be taken seriously. This study evaluates the suitability of BS for pulp and papermaking by assessing the chemical compositions, microstructural, and fiber morphology. The pulping properties is investigated by soda pulping. The chemical composition of BS shows the potential for application in pulping. The BS microstructure shows that can enhance pulping reactions, while the fiber morphology indicates the possibility of producing high-strength paper. Through the pulping experiment, it demonstrated that BS is suitable for pulping with lower NaOH dosage and longer digestion time. The condition at 170 °C with 14% NaOH dosage for 90 min digestion has the highest yield. After refining the highest pulping yield BS pulp, it can improve the handsheet strength and bulk of the OCC-BS mixed pulp, which can achieve the strength property required for industrial paper. In summary, BS exhibits the potential for pulping application and produces a better paper strength than OCC pulp, exhibiting the feasibility of enhancing the circular utilization value of BS in Taiwan., (© 2023. The Author(s).)

Paper spray ionization mass spectrometry (PSI MS) has emerged as a notable method for the rapid analysis of biological samples. However, the typical cellulose-based paper tip is incompatible with protein detection due to the strong interaction between cellulose hydroxyl groups and proteins. In this study, we utilized a commercially available polyolefin-based synthetic paper, Teslin ® , as an alternative PSI substrate for simple protein analysis. We have named this method "droplet PSI" MS, as the aqueous protein solution droplet retains its shape on the Teslin ® paper tip. For droplet PSI, no further chemical pretreatment was necessary for the Teslin ® substrate; the only required preparation was shaping the Teslin ® paper into a triangular tip. In droplet PSI MS, protein ion signals were instantly detected from a protein solution droplet upon applying a spray solvent in situ along with high voltage (HV). When compared with conventional PSI MS, our method demonstrated superior sensitivity. The droplet PSI MS utilizing Teslin ® also showcased flexibility in real-time observation of protein alterations induced by an acid additive. Additionally, the effects of spray solvent composition and the application method were discussed.

Bacterial nanocellulose (BNC), due to its inherent nanometric scale and strength properties, can be considered as a good candidate to be used in papermaking. This work explored the possibility of using it in the production of fine paper as a wet-end component and for the paper coating. Filler-containing handsheet production was performed with and without the presence of common additives typically used in the furnish of office papers. It was found that, under optimized conditions, BNC mechanically treated by high-pressure homogenization could improve all the evaluated paper properties (mechanical, optical and structural) without impairing the filler retention. However, paper strength was improved only to a small extent (increase in the tensile index of 8 % for a filler content of ca. 27.5 %). On the other hand, when used at the paper surface, remarkable improvements in the gamut area of >25 % in comparison to the base paper and of >40 % in comparison to starch-only coated papers were achieved for a formulation having 50 % BNC and 50 % of carboxymethylcellulose. Overall, the present results highlight the possibility of using BNC as a paper component, particularly when applied at the paper substrate as a coating agent aiming at improving printing quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Over the centuries, various types of paper have been produced, each characterized by a different ratio of natural macromolecules, mainly lignin and cellulose. Handmade paper has a higher content of cellulose with respect to the early machine-made paper, where lignin is the other important component. Microorganisms are able to colonize and deteriorate both types. They can release on their surfaces pigments and colorants which produced anesthetic stains. To better understand the microbiota colonizing these stains, 17 samples were analyzed, from both handmade and machine-made paper surfaces, as well as library and archive environments. Combination of microbiological and high-throughput sequencing (HTS) approaches were applied. The culture-dependent methodology comprised: isolation, DNA identification, hydrolytic and paper staining assays. The HTS was performed by MinION platform and for the mycobiome a more suitable bioinformatics analysis pipeline, MetONTIIME based on QIIME2 framework, was applied. The paper model staining assay permitted the direct recognition of colorizing isolates which in combination with sequencing data evidenced a complex microbial community able to stain the two types of paper. Staining abilities were confirmed by frequently isolated and detected fungi as well as newly discovered ones Roussoella euonymi and Achaetomium. We have also evidenced the staining ability of several bacteria., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Microfluidic paper-based analytical devices (μPADs) are emerging as powerful analytical platforms in clinical diagnostics, food safety, and environmental protection because of their low cost and favorable substrate properties for biosensing. However, the existing top-down fabrication methods of paper-based chips suffer from low resolution (>200 μm). Additionally, papers have limitations in their physical properties (e.g., thickness, transmittance, and mechanical flexibility). Here, we demonstrate a bottom-up approach for the rapid fabrication of heterogeneously controlled paper-based chip arrays. We simply print a wax-patterned microchip with wettability contrasts, enabling automatic and selective assembly of cellulose microfibers to construct predefined paper-based microchip arrays with controllable thickness. This paper-based microchip printing technology is feasible for various substrate materials ranging from inorganic glass to organic polymers, providing a versatile platform for the full range of applications including transparent devices and flexible health monitoring. Our bottom-up printing technology using cellulose microfibers as the starting material provides a lateral resolution down to 42 ± 3 μm and achieves the narrowest channel barrier down to 33 ± 2 μm. As a proof-of-concept demonstration, a flexible paper-based glucose monitor is built for human health care, requiring only 0.3 μL of sample for testing.

The search for alternative methods for the production of new materials or fuel from renewable and sustainable biomass feedstocks has gained increasing attention. In this study, Nypa fruticans (nipa palm) fronds from agricultural residues were evaluated to produce pure cellulose by combining prehydrolysis for 1-3 h at 150 °C, sulfur-free soda cooking for 1-1.5 h at 160 °C with 13-25% active alkali (AA), 0.1% soluble anthraquinone (SAQ) catalyst, and three-stage totally chlorine-free (TCF) bleaching, namely oxygen, peroxymonosulfuric acid, and alkaline hydrogen peroxide stages. The optimal conditions were 3 h prehydrolysis and 1.5 h cooking with 20% AA. Soda cooking with SAQ was better than the kraft and soda process without SAQ. The method decreased the kappa number as a residual lignin content index of pulp from 13.4 to 9.9-10.2 and improved the yields by approximately 6%. The TCF bleaching application produced pure cellulose with a brightness of 92.2% ISO, 94.8% α-cellulose, viscosity of 7.9 cP, and 0.2% ash content. These findings show that nipa palm fronds can be used to produce pure cellulose, serving as a dissolving pulp grade for viscose rayon and cellulose derivatives.

This article describes how crystalline or fibrous nanocellulose influences the mechanical properties of paper substrate. In this context, we used commercially available cellulose nanocrystals, mechanically prepared cellulose nanofibers dispersed in water or ethanol, and carboxy cellulose nanofibers. Selective reinforcement of the paper treated with the nanocellulose samples mentioned above was observed. The change in the fibre structure was assessed using scanning electron microscopy, roentgenography, and spectroscopy techniques. In addition, the effect of nanocellulose coating on physical properties was evaluated, specifically tensile index, elongation coefficient, Elmendorf tear resistance, Bendtsen surface roughness, Bendtsen air permeability, and bending strength. It can be concluded that the observed decrease in the strength properties of the paper after applying some NC compositions is due to the loss of potential disturbances in hydrogen bonds between the nanocellulose dispersed in ethanol and the paper substrate. On the other hand, significantly increased strength was observed in the case of paper reinforced with nanocellulose functionalized with carboxyl groups.

Herein, a facile strategy was proposed for preparing a high-strength and super-hydrophobic packaging paper with improved moisture and air barrier properties, which was derived from cellulosic pulps, micro-fibrillated cellulose (MFC), and nano-silica (n-SiO 2 ). Owning to the laminated process followed by spraying approach, MFC and n-SiO 2 were assembled onto two surfaces of the cellulose paper base, respectively, endowing the mechanical behaviors and superhydrophobic performance of this biodegradable composite papers as packaging material. The as-obtained multilayered papers demonstrated impressive dry tensile strength and remarkable wet tensile strength of 6542.5 N/m and 5875 N/m, which were increased by 56% and 2277%, respectively. In addition, the multilayered paper with rational mechanical properties possessed low permeabilities of air (3.17 × 10 -3  μm·Pa -1 ·s -1 ), oxygen (9.687 cm 3 ·m -2 ·day -1 ·atm), and water vapor (378.24 g·m -2 ·day -1 ), respectively, as well as a superhydrophobic performance with the contact angle of ~151.2°. Overall, the feasibility of large-scale production of biodegradable packaging materials in the paper-making industry is demonstrated by the fact that the micro/nanostructures and hydrophobic surfaces could be directly constructed on cellulosic paperboard., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Gaseous acetic acid is formed under conditions of storage of historic paper objects. Its presence not only promotes hydrolytic cleavage of cellulose, but also causes acetylation of the cellulosic material to very small degree. The acetylation reaction proceeds under ambient conditions and without catalyst. Different analytical methods were used to prove the presence of organic acetates on cellulosic paper matrices. DESI-MS in combination with 2 H-isotopic labeling showed the presence of sugar fragments with different acetylation patterns. A method based on Zemplen saponification was applied and worked also in the presence of a large excess of acetic acid and/or inorganic acetates. The acetylation effect was quantified for model papers and original, naturally aged paper samples. While cellulose acetylation was clearly proven to be another general pathway of paper aging, further studies of this acetylation phenomenon are needed with regard to conservational aspects and suitable paper storage conditions., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

To date, flexible pressure sensors built on silver nanowires (AgNWs) have attracted tremendous attention, owing to their versatile applications in wearable, human-interactive, health-monitoring devices. Cellulose and its derivatives, which show great promise in serving flexible pressure sensors as the desired substrate due to their natural abundance, biocompatibility, easy processibility, and low costs. Herein, we reported a rational strategy to design a silver nanowires-dual-cellulose conductive paper. Its morphology, chemical and crystal structures, thermal stability, mechanical performances, and electrical properties were carefully studied. The results suggested that good tensile properties (tensile strength ≤8.10 MPa), high electrical conductivity (≤ 1.74 × 10 4  S·m -1 ) with long-term stability, and good adhesion stability (bending cycles over 500) were obtained. Furthermore, the use of such conductive paper as substrate for versatile flexible pressure sensors was demonstrated, which exhibited fast response (~ 0.48 s) and high sensitivity, in response to finger motion, voice recognition, and human pulse, etc., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Cellulose nanofibril (CNF) paper has various applications due to its unique advantages. Herein, we present the intrinsic mechanical properties of CNF papers, along with the preparation and properties of nanoparticle-reinforced CNF composite papers. The literature on CNF papers reveals a strong correlation between the intrafibrillar network structure and the resulting mechanical properties. This correlation is found to hold for all primary factors affecting mechanical properties, indicating that the performance of CNF materials depends directly on and can be tailored by controlling the intrafibrillar network of the system. The parameters that influence the mechanical properties of CNF papers were critically reviewed. Moreover, the effect on the mechanical properties by adding nanofillers to CNF papers to produce multifunctional composite products was discussed. We concluded this article with future perspectives and possible developments in CNFs and their bionanocomposite papers., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Bio-based additives received significant attention in pulp and paper properties improvement. For this, the most cited biochemical Cellulose Nano Fibrils (CNFs) and Cationic Starch (CS) were experimentally compared with the most declared synthetic chemical, Cationic Polyacrylamide (CPAM). SEM images showed better paper surface filling by the utilization of the chemicals. The three studied polymers, in solely or combination mechanism, improved mainly bagasse pulp and paper properties compared to the blank sample, except for pulp drainage, which decreased by CNFs to lower volumes presumably due to its intrinsic characteristics. Cationic polymers (CP) compared to CP/CNFs approaches increased pulp retention and drainage but decreased paper density and strengths. The best pulp retention and drainage achieved by CS followed by CPAM, while paper air persistency, density, and strength properties evaluated highest by CP/CNFs followed by CNFs. Generally, CS revealed a more significant improvement in pulp and paper properties than CPAM either with or without CNFs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This work demonstrated a facile and sustainable approach to functionalize cellulose nanopaper (CNP) by impregnation of chitosan (CS) and the followed halogenation. It was found that the tensile strength of the functionalized CNP (CNP/CS-Cl) was enhanced by 38.3% and 512.6% at dry and wet conditions, respectively. Meanwhile, the total transmittance (at 550 nm) of CNP/CS-Cl was increased from 75% of pure CNP to 85%, with 35% decrease in optical haze. Moreover, the CNP/CS-Cl exhibited significant enhancement in barrier properties. Importantly, part of the amino groups on CS were transformed into N-halamines during the halogenation process, which endowed the CNP/CS-Cl with excellent antibacterial performance against both S. aureus and E. coli with 100% bacterial reduction after 10 min of contact. Thus, this work provides a simple and efficient approach to functionalize CNP with water resistance, high transparency, excellent antibacterial and barrier properties, which will expand the potential applications of CNP., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Radiometric assays have widely been used for measuring protein kinase activity for decades. In addition, several non-radiometric kinase assay formats have been developed over the years, including luciferase-based and fluorescence-based assays. However, radiometric assays are still considered as the "gold standard" for protein kinase assays, because of their direct readout, high sensitivity, reproducibility, reliability, and very low background signals. These radiometric assays rely on P81 phosphocellulose paper to capture the phosphorylated substrate and wash out unreacted [γ- 32 P] ATP. However, recently the production of P81 was discontinued by the manufacturer, causing major concern within the protein kinase research community. The advantages of radiometric assays over other kinase assay methods call for an urgent alternative to the discontinued P81 paper. In this report, we demonstrate that the LSA-50 paper is a worthy alternative for radiometric protein kinase assays originally using P81 phosphocellulose paper., (Copyright © 2021. Published by Elsevier Inc.)

In this study, we developed an in-package colorimetric paper to monitor the ripeness of kiwifruit by detecting the release of aldehydes. Strongly hydrophobic composite films were prepared using chitosan as the matrix and beeswax as an additive. A piece of cellulose paper containing methyl red and bromocresol violet as color indicators was heat-sealed between two hydrophobic films to protect the indicators from the effects of fruit respiration and transpiration. The nucleophilic addition reaction between aldehydes and OH - (Cannizzaro reaction) changes the pH in the paper and triggers a color change in the indicators. As the kiwifruit ripens, the colorimetric paper changes from bluish-purple to dark red and then gradually to red. A mobile phone application was further used to measure the RGB values and link them to kiwifruit ripeness. This intelligent paper can be used for the accurate and convenient monitoring of produce in real time., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Developing green and simple methods for the preparation of cellulose nanofibrils (CNFs) is of great significance. Herein, a green deep eutectic solvent (DES) system based on choline chloride (ChCl) and citric acid (CA) is employed to pretreat cellulose fibers for the preparation of CNFs. The effect of the pretreatment temperature on the chemo-physical properties of the CNFs is comprehensively investigated. A high CNFs yield of up to 84.19% can be achieved under optimized conditions. The optimal CNFs show a narrow diameter distribution and length up to several microns, high crystallinity and thermal stability, as well as excellent dispersibility in water. Furthermore, semi-transparent and flexible cellulose nanopaper (CNP) was fabricated through a facile vacuum filtration process. The optimal CNP shows high tensile strength (175.15 MPa) and toughness (7.51 MJ/m 3 ). Therefore, this work provides a sustainable and facile approach to fabricate CNFs and CNP, which can be potentially used for various high-tech applications., (Copyright © 2021. Published by Elsevier Ltd.)

Cellulose is a naturally occurring organic polymer extracted mainly from lignocellulosic biomass of terrestrial origin. However, the increasing production of seaweeds for growing global market demands has developed the opportunity to use it as an additional cellulose source. This review aims to prepare comprehensive information to understand seaweed cellulose and its possible applications better. This is the first review that summarizes and discusses the cellulose from all three types (green, red, and brown) of seaweeds in various aspects such as contents, extraction strategies, and cellulose-based products. The seaweed cellulose applications and future perspectives are also discussed. Several seaweed species were found to have significant cellulose content (9-34% dry weight). The review highlights that the properties of seaweed cellulose-based products were comparable to products prepared from plant-based cellulose. Overall, this work demonstrates that cellulose could be economically extracted from phycocolloids industrial waste and selected cellulose-rich seaweed species for various commercial applications., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The progress of bio-based fluorescent smart materials and their multifunctional applications have attained increasing interest in the recent decades. Cellulose is among the cheapest and widespread raw material on earth which can be modified into diverse useful materials. This review summarizes the chemical modification of cellulose into smart fluorescent materials. This further highlights on the fabrication of the prepared fluorescent materials into films, fibers, paper strips, carbon dots, hydrogels and solutions which are applied for the sensing of toxic metals and anions, pH, bioimaging, common organic solvents, aliphatic and aromatic amines, nitroaromatics, fluorescent printing, coating, and anti-counterfeiting applications. Finally, the discussion about the upcoming investigations, challenges, and options open for the cellulose-based luminescence sensors are communicated. We believe that this review will appeal more and more attention and curiosity for the chemists, biochemists, and chemical engineers working with the synthesis of cellulose-based fluorescent materials for widespread applications., (Copyright © 2021. Published by Elsevier Ltd.)

While current trends in Green Analytical Chemistry aim at reducing or simplifying sample treatment, food usually comprises complex matrices where direct analysis is not possible in most cases. In this context, sample treatment plays a pivotal role. Biogenic amines are naturally formed in many foodstuffs due to the action of microorganisms, while their presence has been associated with adverse health effects. In this work, the extraction of seven biogenic amines (cadaverine, histamine, phenylethylamine, putrescine, spermidine, spermine, and tyramine) from beer samples has been simplified using laboratory filter paper as sorbent without any further modification. The analysis of the eluates by direct infusion mass spectrometry reduces the time of analysis, increasing the sample throughput. This simple but effective method enabled the determination of the analytes with limits of detection as low as 0.06 mg L -1 and relative standard deviations better than 11.9%. The suitability of the method has been assessed by analyzing eight different types of beers by the standard addition method., Competing Interests: Declaration of Competing Interest The authors declare that they have no competing interests or personal relationships that could have influenced in any way the work developed in this article., (Copyright © 2021. Published by Elsevier B.V.)

Electron beam irradiation (EBI) is an alternative treatment for intrinsic viscosity (IV) control in cellulose pulps, but has never been integrated in full bleaching sequences for comparison to conventional methods. Both eucalyptus kraft (EK) paper pulp and beech sulfite (BS) dissolving pulp were subjected to totally chlorine free (TCF) bleaching sequences comprising either EBI, ozone, or both for IV control. Additionally, effects of EBI on hexenuronic acid (HexA) and xylan were investigated. IV was adjusted to 450-500 mL g -1 and properties including carbonyl content, kappa, brightness, alkali-resistance and sugar composition were compared. Pulps produced with EBI had a higher alkali-resistance, uniformity and less cellulose oxidation. However, the degree of bleaching (DoB) was low without the use of ozone. HexA content in a birch pulp was halved by EBI. Isolated xylans were more resistant to irradiation than cellulose with little decrease of molar masses and moderate oxidation., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Molecularly imprinted polymers are efficient and selective adsorbents which act as artificial receptors for desired compounds with the ability to recognize the size, shape, and functional groups of the compounds simultaneously. A molecularly imprinted polymer is prepared by the polymerization of functional monomers around a template (analyte) molecule. Afterward, the removal of the template from the polymer matrix leaves a selective cavity behind. The fabrication and development of molecularly imprinted polymers grew rapidly, due to their low cost, simple preparation, selectivity, sensitivity, and stable physicochemical properties. Traditionally, molecularly imprinted polymers can be synthesized using two main methods, namely bulk and surface imprinting. For more efficient use of the latter method, researchers have developed molecularly imprinted polymers grafted on the solid-phase matrix (substrate). This grafting technique would be particularly useful for surface imprinting of macromolecules, such as proteins. Cellulose fibers of papers with unique properties such as being abundant, retaining a porous structure, having good adsorption properties, and possessing hydroxyl groups naturally have gained much attention as substrate. The goal of this review is to introduce molecularly imprinted polymer-grafted or molecularly imprinted polymer-coated paper, as an interesting, simple, and efficient method in the detection and separation of small and large molecules. Therefore, in the present paper, several recent preparation techniques and applications of molecularly imprinted polymer-grafted paper are reviewed and discussed in detail. Green, cost-effective, selective, and sensitive paper-based sensor prepared via grafting molecularly imprinted polymer on paper surface with the potential use for online detection trace of analytes in the point-of-care testing., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features ( e.g. , electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm -1 , which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli , with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

Paper-TiO 2 -Ag 2 O floating photocatalysts were produced under mild condition and their photocatalytic activity for the degradation of aromatic amine under sunlight stimulant was investigated. Characterizations by Raman, XRD, XPS, DRS and PL confirmed the presence of TiO 2 and Ag 2 O, and the morphology of the appended TiO 2 /Ag 2 O layer was probed by FE-SEM. The photocatalytic activity of the prepared samples was investigated by the degradation of aniline (AN) in water under simulated sun-light illumination and constrained conditions, i.e. non-stirring and non-oxygenation. The presence of Ag 2 O combined with TiO 2 was shown to improve the resistance of paper to bacteria attack, thus increasing the durability of the photocatalyst. Thanks to its hydrophobic character, the paper-TiO 2 -Ag 2 O NPs can be employed as useful floating photocatalyst and can be reused in continuous cycles., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Packaging is as important as the product itself because it is a crucial marketing and communication tool for business. Oxidized nanocellulose (ONC), extracted from agriculture residues of bagasse raw material using ecofriendly ammonium persulfate hydrolysis method, is used as support/reducing agent for the generation of silver nanoparticles (AgNPs) via photochemical procedure and reinforcing element in paper functionalization. The natural polymer, sodium alginate (SA) is exploited to enhance the binding of the ONC-AgNPs over cellulose fibers. The SA/ONC-AgNPs bio-nanocomposite is incorporated on paper matrix, which represents a more suitable choice respect to other substrates for its renewable, biocompatible, biodegradable, and cost-effective properties. Structural and antimicrobial evaluations show that the papers embedded with the SA/ONC-AgNPs possess good mechanical, thermal, barrier and antibacterial properties., Competing Interests: Declaration of competing interest There is no conflict of interest in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Flexible electronics products have attracted wide attention because of their excellent flexibility, conductivity and stability. In this study, the liquid phase reduction method was used to in situ reduce fractal-structured silver particles (FSSPs) on cellulose surface to prepare conductive paper with excellent conductivity, and good stability and flexibility. The experimental results show that when the mass ratio of silver to cellulose was 1.5:1, the sheet resistance of conductive paper is as low as 0.02 Ω·sq -1 , and the conductivity reaches 1041.33 S cm -1 , which shows excellent conductivity. In order to expand the application of conductive paper in the field of flexible wearable electronic products, the mechanical stability and oxidation resistance of conductive paper were tested. The results show that the conductive paper has good stability and is expected to replace the flexible electronics products made of plastic., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Luminescent quantum dot (QD) ink is currently a powerful tool for generating hidden information on paper substrates. Herein, we fabricated a nanohybrid ink of bacterial cellulose nanocrystal (BCNC) and UV-responsive ZnO QD via electrostatic self-assembly for improving solvent resistance and message encryption process. Under investigations on the printed areas, the nanohybrid can slightly infiltrate into the paper fibers and form a thin layer on the top of paper substrates, conferring an enhanced print permanence against wetting conditions while maintaining the daylight unobservability and its luminescent stability. The water resistance of the proposed nanohybrid ink enables developing a higher security level that the prints can be submerged in CuCl 2 aqueous solutions to quench the luminescent message. The concealed message can eventually be revealed under UV light again after submerging in EDTA solution. Our ZnO QD/BCNC nanohybrid with eco-friendly nature therefore exhibits great potential as security marking ink for counterfeit protection with sustainable uses., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac 2 O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Cell-free expression systems have drawn increasing attention as a tool to achieve complex biological functions outside of the cell. Several applications of the technology involve the delivery of functionality to challenging environments, such as field-forward diagnostics or point-of-need manufacturing of pharmaceuticals. To achieve these goals, cell-free reaction components are preserved using encapsulation or lyophilization methods, both of which often involve an embedding of components in porous matrices like paper or hydrogels. Previous work has shown a range of impacts of porous materials on cell-free expression reactions. Here, we explored a panel of 32 paperlike materials and 5 hydrogel materials for the impact on reaction performance. The screen included a tolerance to lyophilization for reaction systems based on both cell lysates and purified expression components. For paperlike materials, we found that (1) materials based on synthetic polymers were mostly incompatible with cell-free expression, (2) lysate-based reactions were largely insensitive to the matrix for cellulosic and microfiber materials, and (3) purified systems had an improved performance when lyophilized in cellulosic but not microfiber matrices. The impact of hydrogel materials ranged from completely inhibitory to a slight enhancement. The exploration of modulating the rehydration volume of lyophilized reactions yielded reaction speed increases using an enzymatic colorimetric reporter of up to twofold with an optimal ratio of 2:1 lyophilized reaction to rehydration volume for the lysate system and 1.5:1 for the purified system. The effect was independent of the matrices assessed. Testing with a fluorescent nonenzymatic reporter and no matrix showed similar improvements in both yields and reaction speeds for the lysate system and yields but not reaction speeds for the purified system. We finally used these observations to show an improved performance of two sensors that span reaction types, matrix, and reporters. In total, these results should enhance efforts to develop field-forward applications of cell-free expression systems.

In this work, cellulose filter paper (CFP), which is inexpensive and commercially available, was used as the carrier, and the immobilized α-glucosidase was obtained by two steps: firstly, the surface of CFP was modified by polydopamine/polyethyleneimine (PDA/PEI) co-deposition method to obtain CFP-PDA/PEI with a uniform coating of rich positive charge; subsequently, α-glucosidase was immobilized on the CFP-PDA/PEI by electrostatic adsorption. The free enzyme and immobilized enzyme have the same optimal temperature (70℃) and pH (8.0), and their K m is similar, which is 2.2 and 2.8, respectively. These results show that the immobilization process does not change the properties of the enzyme greatly. The immobilized enzyme still maintains 75.6% of its initial activity after 10 repeated uses, showing good reusability. The excellent repeatability (RSD = 2.2%, n = 5) and the verification of competitive inhibitor (acarbose) illustrates the reliability of the immobilized enzymes for enzyme inhibitor screening. Finally, combined with CE, a screening method based immobilized α-glucosidase was proposed and applied to screen the α-glucosidase inhibitory from 10 kinds of Traditional Chinese medicines (TCMs) in vitro. The results indicated that the method was a very effective tool for screening potential α-glucosidase inhibitors from TCMs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cellulose and lignocellulose nanofibrils were extracted from pistachio shells utilizing environmentally friendly pulping and totally chlorine-free bleaching. The extracted nanofibers were used to elaborate nanopaper, a continuous film made by gravimetric entanglement of the nanofibers and hot-pressed to enhance intramolecular bonding. The elaborated nanopapers were analyzed through their mechanical, optical, and surface properties to evaluate the influence of non-cellulosic macromolecules on the final properties of the nanopaper. Results have shown that the presence of lignin augmented the viscoelastic properties of the nanopapers by ≈25% compared with fully bleached nanopaper; moreover, the hydrophobicity of the lignocellulose nanopaper was achieved, as the surface free energy was diminished from 62.65 to 32.45 mNm -1 with an almost non-polar component and a water contact angle of 93.52°. On the other hand, the presence of lignin had an apparent visual effect on the color of the nanopapers, with a ΔE of 51.33 and a ΔL of -44.91, meaning a substantial darkening of the film. However, in terms of ultraviolet transmittance, the presence of lignin resulted in a practically nonexistent transmission in the UV spectra, with low transmittance in the visible wavelengths. In general, the presence of lignin resulted in the enhancement of selected properties which are desirable for packaging materials, which makes pistachio shell nano-lignocellulose an attractive option for this field.

This short communication describes the climate change impacts of using cellulose, and more precisely cellulosic fiber-based materials, in food packaging, representing current and emerging industrial state of the art technology, without specific reference to current scientific advances. First, the different types of cellulosic fiber-based packaging materials, which can be used to replace fossil-based packaging materials, are presented for flexible and rigid applications. The focus is on technological solutions with packaging properties that enable the protection of commonly sold food products. The manufacturing processes associated with these cellulosic fiber-based materials is described and the environmental impact assessment of 4 selected case studies presented: stand-up pouches, flexible flow wraps, frozen or chilled food trays, and molded pulp lids. A simplified eco-design Life Cycle Assessment (LCA) was then performed to compare each solution with its fossil-based counterpart. Differences and similarities between the various cellulosic solutions have been identified. Furthermore, the assessment confirms that cellulosic fiber-based materials have reduced environmental impacts as compared to fossil-based counterparts, if a similar packaging weight is obtained. Indeed, all impacts of plastics are between 3 and 5 kg CO 2 eq/kg, while all impacts of cellulosic fiber-based materials are below 1.5 kg CO 2 eq/kg., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This study aims to understand the effect of micro- and nanofibrillated cellulose (MNFC) on the tensile index, softness, and water absorbency of tissue paper. MNFC was produced from four different fiber sources. The results show that MNFC acts as an effective strength enhancer at the expense of a reduced water absorbency and softness. The impact of the fiber source on MNFC manufacturing cost and the trade-off with performance was also investigated. MNFCs produced from southern bleached hardwood kraft, northern bleached softwood kraft, and deinked pulp exhibited similar performance trends with the MNFC from the deinked pulp having a significantly lower cost. This suggests that MNFCs with similar degrees of fibrillation may be used interchangeably regardless of the fiber source, revealing the possibility to minimize MNFC manufacturing costs based on fiber selection. MNFC produced from bleached Eucalyptus kraft showed the lowest degree of fibrillation and the lowest strength improvements among the MNFCs evaluated., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cellulosic nanomaterials are in the focus of academia and industry to realize light-weight biobased materials with remarkable strength. While the effect is well known, the distribution of these nanomaterials are less explored, particularly for paper sheets. Here, we explore the 3D distribution of micro and nanosized cellulosic particles in paper sheets and correlate their extent of fibrillation to the distribution inside the sheets and subsequently to paper properties. To overcome challenges with contrast between the particles and the matrix, we attached probes on the cellulose nano/microparticles, either by covalent attachment of fluorescent dyes or by physical deposition of cobalt ferrite nanoparticles. The increased contrast enabled visualization of the micro and nanosized particles inside the paper matrix using multiphoton microscopy, X-ray microtomography and SEM-EDX. The results indicate that fibrillary fines enrich at pores and fiber-fiber junctions, thereby increasing the relative bonded area between fibers to enhance paper strength while CNF seems to additionally form an inner 3D network., (Copyright © 2020 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The pulp and paper industry is a major source of lignocellulose-containing streams. The components of lignocellulose material are lignin, hemicellulose, and cellulose that may be hydrolyzed into their smaller components and used as feedstocks for valorization efforts. Much of this material is contained in underutilized streams and waste products, such as black liquor, pulp and paper sludge, and wastewater. Bacterial fermentation strategies have suitable potential to upgrade lignocellulosic biomass contained in these streams to value-added chemicals. Bacterial conversion allows for a sustainable and economically feasible approach to valorizing these streams, which can bolster and expand applications of the pulp and paper industry. This review discusses the composition of pulp and paper streams, bacterial isolates from process streams that can be used for lignocellulose biotransformations, and technological approaches for improving valorization efforts. KEY POINTS: • Reviews the conversion of pulp and paper industry waste by bacterial isolates. • Metabolic pathways for the breakdown of lignocellulose components. • Methods for isolating bacteria, determining value-added products, and increasing product yields.

Here, we aimed to boost antibacterial performance of cellulose fibers for paper sheet application. Therefore, TiO 2 nanoparticles have been used with controlled loading onto the surface of the fibers. A simple and facile composite preparation route based on ultrasound and mechanical assisted stirring has been developed. We tested cellulose paper enriched by TiO 2 from 1.0 wt% to 8.0 wt%, respectively. Antibacterial performance has been studied against Staphylococcus aureus and Escherichia coli bacteria. Studies showed that all composites exhibit significant capability to reduce living cells of S. aureus and E. coli bacteria at least 60%. The simplicity, low cost, and reproducibility of the prepared method indicates the potential to be scaled up for industrial applications.

Nanofibrillated cellulose (NFC), a promising bio-based nanomaterial, has received much attention in the field of coating preparation due to its unique properties. Herein, NFC was prepared from microcrystalline cellulose (MCC) via high-pressure homogenization process and deliberately employed as coating agent to enhance the properties of paper coatings and coated paper. The results demonstrated that the obtained paper coatings exhibited strong NFC concentration dependence on rheological behavior and displayed decreased water retention value with the increased NFC addition. Meanwhile, NFC addition was found to lead to the reduced Cobb value, improved air resistance, and enhanced tensile strength of coated paper. Under an optimized NFC addition of 0.30-0.40%, the properties of coated paper generally reached the optimum state. Moreover, SEM observation further confirmed that NFC addition imparted a relatively uniform surface structure to coated paper. Hence, NFC could be defined as an effective coating agent for developing high-performance coated paper for food packaging applications., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Whatman No. 1 chromatography paper is widely used as a substrate for cellulose-based immunoassays. The immobilized proteins are used to capture target biomarkers for detection. However, alternative paper substrates may facilitate mass production of immunoassays as diagnostic tests. Here, we assessed the physical characteristics and protein immobilization capabilities of different commercial papers. Some substrates fulfilled our design criteria, including adequate flow rate and sufficient protein immobilization for efficient target capture. This study demonstrates that a variety of paper substrates can be bioactivated and used to capture target biomarkers, enabling development of affordable diagnostic tests from a range of starting materials.

Separator is a vital component of lithium-ion batteries (LIBs) due to its important roles in the safety and electrochemical performance of the batteries. Herein, we reported a cellulose nanofibrils (CNFs) reinforced pure cellulose paper (CCP) as a LIBs separator fabricated by a facile filtration process. The nanosized CNFs played crucial roles as a tuner to optimize the pore size of the as-prepared CCP, and also as a reinforcer to improve the mechanical strength of the resultant CCP. Results showed that the tensile strength of the CCP with 20 wt.% CNFs was 227 % higher compared to the commercial cellulose separator. In addition, the lithium cobalt oxide/lithium metal battery assembled with CCP separator displayed better cycle performance and working stability (capacity retention ratio of 91 % after 100 cycles) compared to the batteries with cellulose separator (52 %) and polypropylene separator (84 %) owing to the multiple synergies between CCP separator and electrolytes., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

We report on a simple, cost-effective, instrument-free, and portable distance-based paper device coupled with NFs for the determination of glucose. The analysis reaction is based upon the oxidative etching reaction of silver nanoparticles (AgNPs) in the presence of H 2 O 2 that is produced from glucose after a glucose oxidase (GOx) catalytic reaction leading to a morphological transformation of AgNPs. A color band length of AgNPs is coated on to a detection channel and then etched by H 2 O 2 , and these were changed from a purple color to colorless as a correlate of the glucose concentration. To improve the performance of the enzyme immobilization, NFs, which are biocompatible without compromising their structure and biological activity, were then placed onto the sample zone. The naked-eye detection limit was 0.1 mM for 40 min of analysis time. The recoveries of glucose spiked in the artificial urine samples and control urine samples were then verified by our device and were in the acceptable range of 96 - 100%.