Search

The regeneration of bone via a tissue engineering approach involves components from the macroscopic to the nanoscopic level, including appropriate 3D scaffolds, cells and growth factors. In this study, hexagonal scaffolds of different diagonals were fabricated by Direct Laser Writing using a photopolymerizable hybrid material. The proliferation of bone marrow (BM) mesenchymal stem cells (MSCs) cultured on structures with various diagonals, 50, 100, 150 and 200μm increased significantly after 10days in culture, however without significant differences among them. Next, recombinant human bone morphogenetic protein 2 (rhBMP-2) was immobilized onto the hybrid material both via covalent binding and physical adsorption. Both immobilization types exhibited similar high releaseate bioactivity profiles and a sustained delivery of rhBMP-2. The collagen and calcium levels produced in the extracellular matrix (ECM) were significantly elevated for the samples functionalized with BMP-2 compared to those in the osteogenic medium. Furthermore, significant upregulation of gene expression in both types of BMP-2 immobilized scaffolds was observed for alkaline phosphatase (ALPL) and osteocalcin (BGLAP) at days 7, 14, and 21, for RUNX2 at day 21, and for osteonectin (SPARC) at days 7 and 14. The results suggest that the release of bioactive rhBMP-2 from the hybrid scaffolds enhance the control over the osteogenic differentiation during cell culture., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The modeling, fabrication, cell loading, and mechanical and in vitro biological testing of biomimetic, interlockable, laser-made, concentric 3D scaffolds are presented. The scaffolds are made by multiphoton polymerization of an organic-inorganic zirconium silicate. Their mechanical properties are theoretically modeled using finite elements analysis and experimentally measured using a Microsquisher(®). They are subsequently loaded with preosteoblastic cells, which remain live after 24 and 72 h. The interlockable scaffolds have maintained their ability to fuse with tissue spheroids. This work represents a novel technological platform, enabling the rapid, laser-based, in situ 3D tissue biofabrication.

Engineering biomaterial scaffolds that promote attachment and growth of mesenchymal stem cells in three dimensions is a crucial parameter for successful bone tissue engineering. Towards this direction, a lot of research effort has focused recently into the development of three-dimensional porous scaffolds, aiming to elicit positive cellular behavior. However, the fabrication of three-dimensional tissue scaffolds with a precise geometry and complex micro- and nano-features, supporting cell in-growth remains a challenge. In this study we report on a positive cellular response of human bone marrow-derived (BM) mesenchymal stem cells (MSCs) onto hybrid material scaffolds consisting of methacryloxypropyl trimethoxysilane, zirconium propoxide, and 2-(dimethylamino)ethyl methacrylate (DMAEMA). First, we use Direct fs Laser Writing, a 3D scaffolding technology to fabricate the complex structures. Subsequently, we investigate the morphology, viability and proliferation of BM-MSCs onto the hybrid scaffolds and examine the cellular response from different donors. Finally, we explore the effect of the materials' chemical composition on cell proliferation, employing three different material surfaces: (i) a hybrid consisting of methacryloxypropyl trimethoxysilane, zirconium propoxide and 50mol% DMAEMA, (ii) a hybrid material comprising methacryloxypropyl trimethoxysilane and zirconium propoxide, and (iii) a purely organic polyDMAEMA. Our results show a strong adhesion of BM-MSCs onto the hybrid material containing 50% DMAEMA from the first 2h after seeding, and up to several days, and a proliferation increase after 14 and 21days, similar to the polystyrene control, independent of cell donor. These findings support the potential use of our proposed cell-material combination in bone tissue engineering., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Damage in the Peripheral Nervous System (PNS) is related to numerous neurodegenerative diseases and has consequently drawn the attention of Tissue Engineering (TE), which is considered a promising alternative to already established methods such as surgery and autografts. TE focuses on the design, optimization, and use of scaffolds in vitro and in vivo. In this work, the authors used a novel scaffold geometry fabricated via Multiphoton Lithography (MPL), a commonly used fabrication method, for the mono- and co-cultures of glial Schwann (SW10) and neuronal Neuro-2a (N2a) cells. Both cell types have already been used for the study of various neurodegenerative diseases. However, their focus has been on only one of the cell types at a time, with studies regarding their co-culture only recently documented. Here, the suitability of the fabricated scaffolds has been explored and the effects of topography on SW10 and N2a behavior have been investigated. Our findings demonstrate that scaffold co-culture systems favor the presence of neurites compared to mono-cultures at 21 days (31.4 ± 5.5% and 15.4 ± 5.4%, respectively), while there is also a significant decrease in long neurites in the mono-culture over time (45.3 ± 15.9% at 7 days versus 15.4 ± 5.4% at 21 days). It has been shown that the scaffolds can successfully manipulate cell growth, elongation, and morphology, and these results can form a basis for the development of an experimental model for the study of PNS-related diseases and understanding of key cell functions such as myelination. [ABSTRACT FROM AUTHOR]

Exploiting the unique properties of three‐dimensional (3D) auxetic scaffolds in tissue engineering and regenerative medicine applications provides new impetus to these fields. Herein, the results on the fabrication and characterization of 3D auxetic scaffolds for tissue engineering applications are presented. The scaffolds are based on the well‐known re‐entrant hexagonal geometry (bowtie) and they are fabricated by multiphoton lithography using the organic−inorganic photopolymer SZ2080. In situ scanning electron microscopy–microindentations and nanoindention experiments are employed to characterize the photocurable resin SZ2080 and the scaffolds fabricated with it. Despite SZ2080 being a stiff material with a positive Poisson's ratio, the scaffolds exhibit a negative Poisson's ratio and high elasticity due to their architecture. Next, mouse fibroblasts are used to seed the scaffolds, showing that they can readily penetrate them and proliferate in them, adapting the scaffold shape to suit the cells' requirements. Moreover, the scaffold architecture provides the cells with a predilection to specific directions, an imperative parameter for regenerative medicine in many cell‐based applications. This research paves the way for the utility of 3D auxetic metamaterials as the next‐generation adaptable scaffolds for tissue engineering. [ABSTRACT FROM AUTHOR]