Search

Background: Total hip arthroplasty is the preferred treatment for advanced hip osteoarthritis, yet complications like hip dislocation (0.2 %-10 %) persist due to factors such as implant design, positioning, surgical technique, and patient-specific conditions. Impingement between prosthetic components or the acetabulum and proximal femur is a primary cause of instability., Methods: A retrospective analysis of 120 patients (130 hips) undergoing total hip arthroplasty at XX Hospital (2011-2023) categorized patients by lateral center-edge angle: developmental dysplasia of the hip, borderline developmental dysplasia of the hip, and normal hip. ct imaging facilitated virtual 3D bone models for motion analysis, excluding cases with prior hip surgery or spinal fusion. Statistical analyses utilized the Mann-Whitney U test and one-way ANOVA., Findings: The developmental dysplasia of the hip group showed the highest posterior impingement frequency, significantly affecting range of motion in flexion, adduction, and external rotation compared to borderline developmental dysplasia of the hip and normal hip groups. Variations in femoral neck anteversion, lesser trochanter version, and ischiofemoral space were notable. Posterior impingement commonly occurred between the lesser trochanter and ischial tuberosity., Interpretation: Posterior bony impingement emerged as a predominant factor reducing range of motion and increasing dislocation risk, particularly in developmental dysplasia of the hip patients, challenging the conventional "safe zone" for implant positioning. Personalized surgical strategies tailored to individual bone morphology are crucial for enhancing total hip arthroplasty outcomes and minimizing complications, although limitations include the exclusion of soft tissue influences and focusing solely on range of motion until impingement occurs., Competing Interests: Declaration of competing interest No benefits in any form have been received or will be received from any commercial party directly or indirectly related to the subject of this study. No competing interests are disclosed., (Copyright © 2024. Published by Elsevier Ltd.)

The best treatment method for reverse obliquity intertrochanteric fractures (ROIFs) is still under debate. Our team designed the modified proximal femoral nail (MPFN) specially for treating such fractures. The objective of this research was to introduce the MPFN device and compare the biomechanical properties with Proximal Femoral Nail Antirotation (PFNA) and InterTAN nail via finite element modelling. An AO/OTA 31-A3.1 ROIF model was established via Mimics software. Three implants were depicted and assembled on the ROIF models. The axial, bending, and torsion loads were simulated to test stress and displacement of three fixation models. Compared to the PFNA and InterTAN models, the MPFN model had more dispersed stress distribution under axial loads of 2,100 N. The MPFN showed lower von Mises stress on bones compared with that of PFNA and InterTAN in axial loads. In term of maximum displacement, the MPFN had a 12.6% reduction compared to the PFNA model in axial load case. In bending and torsion loads, the MPFN model also demonstrated better biomechanical properties than the PFNA and InterTAN models. The modified proximal femoral nail presented the best biomechanical performance, followed by the InterTAN nail, and the PFNA for fixing reverse obliquity intertrochanteric fractures. The MPFN has the potential to be a promising device for patients with ROIFs., Competing Interests: Declarations. Competing interests: The authors declare no competing interests. Consent to participate/consent to publish: All patients or their family members have signed the informed consent before surgery and provided the consent to publish and report individual clinical data., (© 2025. The Author(s).)

Background and Objectives : The study aimed to evaluate a newly designed semicircular implant for the fixation of Vancouver Type B1 periprosthetic femoral fractures (PFFs) in total hip arthroplasty (THA) patients. To determine its strength and clinical applicability, the new implant was compared biomechanically with conventional fixation methods, such as lateral locking plate fixation and a plate combined with cerclage wires. Materials and Methods : Fifteen synthetic femur models were used in this biomechanical study. A Vancouver Type B1 periprosthetic fracture was simulated by osteotomy 5 mm distal to the femoral stem. The models were divided into three groups: Group I (lateral locking plate fixation), Group II (lateral locking plate with cerclage wires), and Group III (new semicircular implant system). All fixation methods were subjected to axial loading, lateral bending, and torsional force testing using an MTS biomechanical testing device. Failure load and displacement were measured to assess stability. Results : The semicircular implant (Group III) demonstrated a significantly higher failure load (778.8 ± 74.089 N) compared to the lateral plate (Group I: 467 ± 68.165 N) and plate with cerclage wires (Group II: 652.4 ± 65.474 N; p < 0.001). The new implant also exhibited superior stability under axial, lateral bending, and torsional forces. The failure load for Group III was more robust, with fractures occurring at the screw level rather than plate or screw detachment. Conclusions : Compared to traditional fixation methods, the newly designed semicircular implant demonstrated superior biomechanical performance in stabilizing Vancouver Type B1 periprosthetic femoral fractures. It withstood higher physiological loads, offered better structural stability, and could be an alternative to existing fixation systems in clinical practice. Further studies, including cadaveric and in vivo trials, are recommended to confirm these results and assess the long-term clinical outcomes.

In modern knee arthroplasty, surgeons increasingly aim for individualised implant selection based on data-driven decisions to improve patient satisfaction rates. The identification of an implant design that optimally fits to a patient's native kinematic patterns and functional requirements could provide a basis towards subject-specific phenotyping. The goal of this study was to achieve a first step towards identifying easily accessible and intuitive features that allow for discrimination between implant designs based on kinematic data. A squat-cycle was simulated on eight fresh frozen specimens mounted in a weight-bearing knee rig, each initially tested under native conditions, and then after implantation with four different implant types (CR/CS, MS, LS, and PS). The kinematic signals of these five configurations were compared to determine whether key differences between implants could be detected leveraging two methodological approaches: (1) statistical parametric mapping to directly compare waveforms and (2) simple paired t-tests to compare the three-dimensional coordinates of the functional centres of rotation determined using a previously published REference FRame Alignment Method (REFRAME). While statistical parametric mapping of the kinematic data revealed only small differences in certain comparisons (e.g. LS vs. PS, and MS vs. LS) under lenient statistical testing conditions, the application of REFRAME showed clear differences between implants (for all implant combinations except for CR/CS vs. LS), even under conservative statistical testing. Since for most implant combinations, significant differences in the centres of rotation were found using REFRAME, this approach could present a suitable tool for discriminating between the kinematics of different implant types. Preoperative assessment of joint kinematics, combined with this REFRAME application, could therefore provide a key approach for improved clinical selection of implant type., Competing Interests: Declarations. Competing interests: B.Braun Aesculap AG (Tuttlingen, Germany) provided research support for this study. Some of the authors (AS, AOV, AM and TMG) are employees of B.Braun Aesculap AG (Tuttlingen, Germany). AOV, AS, and AM are all listed as co-inventors on a pending patent application submitted by B.Braun Aesculap AG under number DE102022125697A1, which claims a system for standardising axis orientation and position in kinematic data, used in this study. The funders had no role in study design, data collection and analysis, decision to publish or preparation of the manuscript., (© 2025. The Author(s).)

Background: This study investigated bone mineral density (BMD) around the knee joint to clarify the mechanism by which tibia deformation exceeds that of the femur in patients with end-stage knee osteoarthritis (KOA)., Methods: We retrospectively analyzed 193 patients who underwent total knee arthroplasty for end-stage KOA with varus alignment. Preoperative T-score of the femur neck and femur total using dual-energy X-ray absorptiometry (DXA) and hounsfield units (HU) of the distal femur and proximal tibia using computed tomography (CT) were measured to asess the BMD. HU was measured by dividing the femur and tibia into medial, lateral, and total parts, respectively. Patients with medial proximal tibial angle (MPTA) ≥ 85° were considered 'group 1', and MPTA < 85° were 'group 2'. The HU between femur and tibia were compared in group 1. T-score, HU, and HU difference between group 1 and group 2 were compared., Results: The HU of the proximal tibia was lower than that of the distal femur (femur lateral > femur medial > tibia medial > tibia lateral). T-score (femur neck, femur total) and HU (femur lateral, femur total, tibia lateral) were lower in group 2 than in group 1. There was no difference in femur-tibia HU difference between groups., Conclusion: The medial tibia collapse more than the medial femur in varus endstage KOA was associated with the lower BMD of the proximal tibia than that of the distal femur, and the MPTA collapse was affected by the absolute value of BMD rather than by the femur-tibia BMD difference., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: This study aimed to clarify whether the anterior hip capsular ligament is impinged between the acetabulum and femur during hip flexion or adduction and to determine the difference in the distance between the femur and capsular ligament in healthy adults and those with hip pain., Methods: Magnetic resonance imaging of the hip joint was conducted at the following hip positions: 0° of flexion, 60° of flexion, maximal flexion, and maximal flexion with adduction. A three-dimensional model of the capsular ligament and femur was constructed. The minimal distance between the femur and capsular ligament, termed the capsule-femur distance, was computed. Because a capsule-femur distance of 0 mm indicates contact between the femur and the capsular ligament, that is, capsular impingement, the distance in each position was compared for each group using a one-sample t-test. The capsule-femur distance in the various groups and for different positions was compared using a split-plot analysis of variance., Findings: Fifteen healthy individuals and sixteen individuals experiencing hip pain were enrolled. The capsule-femur distance was significantly greater than 0 mm in all positions in both groups, and none of the groups had a capsule-femur distance of 0 mm. The capsule-femur distance was significantly longer in the other positions than in the 0° flexion position, and significantly longer in the hip pain group than in the healthy group., Interpretation: Capsular impingement did not occur in either group, even during hip flexion or adduction. Furthermore, the capsule-femur distance was longer in the hip flexion and hip pain groups., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Osteoporosis is characterized by loss of bone mineral density and increased fracture risk. Reduction of hip fracture incidence is of major clinical importance. Hip protectors aim to attenuate the impact force transmitted to the femur upon falling, however different conclusions on their efficacy have been reported; some authors suggest this may be due to differences in compliance. The aim of this study was to apply an In Silico trial methodology to predict the effectiveness of hip protectors and its dependence on compliance. A cohort of 1044 virtual patients (Finite Element models of proximal femur) were generated. A Markov chain process was implemented to predict fracture incidence with and without hip protectors, by simulating different levels of compliance. At each simulated follow-up year, a Poisson distribution was randomly sampled to determine the number of falls sustained by each patient. Impact direction and force were stochastically sampled from a range of possible scenarios. The effect of wearing a hip protector was simulated by applying attenuation coefficients to the impact force (12.9 %, 19 % and 33.8 %, as reported for available devices). A patient was considered fractured when impact force exceeded the femur strength. Without hip protector, virtual patients experienced 66 ± 5 fractures in 10 years. Wearing the three devices, fracture incidence was reduced to 43 ± 4, 35 ± 4 and 17 ± 2 respectively, at full compliance. As expected, effectiveness was dependent on compliance. This In Silico trial technology can be applied in the future to test multiple interventions, optimise intervention strategies, improve clinical trial design and drug development., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background/aim: Patients with bone tumors in their femurs are at risk of developing pathological fractures. Tumors with high fracture risk, especially fragile malignant lesions, are treated surgically. However, it is difficult to estimate bone strength based on clinical and radiographic findings. This study aimed to determine whether finite element analysis (FEA) provides useful information on the bone strength of femurs with tumors and tumor-like lesions., Patients and Methods: Total femoral computed tomography (CT) data (slice thickness, 0.5 mm) were retrospectively obtained from 18 patients with femoral bone tumors. Three-dimensional FEA of femurs were developed using CT data. The virtual femoral head compression test and direct three-point bending test were performed on the femurs using FEA to predict bone strength and fracture location. The compression direction was parallel to the mechanical axis, whereas that of the three-point bending test was applied to the tumor itself., Results: In the femoral head compression test using FEA, 13 out of 18 femurs with bone tumors fractured at the femoral head, while 14 out of 18 femurs fractured at the tumor site during the virtual direct three-point bending test. The median loads predicted using the femoral head compression test were significantly higher than those predicted by the direct three-point bending test., Conclusion: The FEA results indicated that pathological fractures are unlikely to occur during normal walking. Direct external forces applied to the tumor body may lead to fractures., (Copyright © 2024, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Introduction: Our primary goal was to investigate the independent and combined associations of physical activity (PA) and sitting time (ST) with femoral bone health among cancer survivors aged 60 or older., Materials and Methods: This cross-sectional study included 1159 cancer survivors aged 60 years or older who underwent femur dual-energy X-ray absorptiometry (DXA) examination from continuous National Health and Nutrition Examination Survey data sets. PA and ST were assessed by self-report, and bone health included bone mineral density (BMD) at all femoral sub-regions, osteopenia/osteoporosis of femoral neck, and total fracture. The independent and combined associations of PA and ST with femoral bone health were determined using multivariable linear or logistic regression analyses., Results: More than 40% cancer survivors reported engaging in PA < 150 min/week with ST ≥ 6 h/d. PA solely showed no association with bone health at femur sites. Prolonged ST was associated with lower femur's BMD, higher prevalence of osteopenia/osteoporosis, and total fracture. Specifically, the negative association of prolonged ST and femur's BMD was shown in PA ≥ 150 min/week group, but not in PA < 150 min/week group. In combined analysis, prolonged ST with PA ≥ 150 min/week showed the strongest negative associations with femur's BMD., Conclusion: PA appears not to be directly associated with femoral bone health. Higher ST is associated with lower BMD and a higher incidence of total fractures, regardless of PA level, among cancer survivors aged 60 or older., Competing Interests: Declarations. Conflict of interest: All authors have no conflicts of interest. Ethical approval: This study was approved by the Research Ethics Review Board of the National Center for Health Statistics, Centers for Disease Control and Prevention. Consent to participate: Each participant of NHANES provided an informed consent form during registration., (© 2024. The Japanese Society Bone and Mineral Research.)

Background: Magnetic intramedullary lengthening nailing has demonstrated benefits over external fixation devices for femoral bone lengthening. These include avoiding uncomfortable external fixation and associated pin site infections, scarring, and inhibition of muscle or joint function. Despite this, little has changed in the field of biologically enhanced bone regeneration. Venting the femoral intramedullary canal at the osteotomy site before reaming creates egress for bone marrow during reaming. The reamings that are extruded from vent holes may function as a prepositioned bone graft at the distraction gap. The relationship between venting and the consolidation of regenerating bone remains unclear., Questions/purposes: (1) Do bone marrow reamings extruded through venting holes enhance the quality of bone regeneration and improve healing indices and consolidation times? (2) Is venting associated with a higher proportion of complications than nonventing?, Methods: We performed a retrospective study of femoral lengthening performed at one hospital from December 2012 to February 2022 using a magnetic intramedullary lengthening nail with or without venting at the osteotomy site before reaming. This was a generally sequential series, in which the study groups were assembled as follows: Venting was performed between July 2012 and August 2016 and again from November 2021 onward. Nonventing was used between October 2016 and October 2021 because the senior author opted to create drill holes after the reaming procedure to avoid commitment to the osteotomy level before completing the reaming procedure. Outcomes were evaluated based on bone healing time, time to achieve full weightbearing, and complications. Sixty-one femoral lengthening procedures were studied (in 33 male and 28 female patients); two patients were excluded because of implant breakage. The mean age was 17 ± 5 years. The mean amount of lengthening was 55 ± 13 mm in the venting group and 48 ± 16 mm in the nonventing group (mean difference 7 ± 21 [95% CI 2 to 12]; p = 0.07). The healing index was defined as the time (in days) required for three cortices to bridge with new bone formation divided by the length (in cm) lengthened during the clinical protocol. This index signifies the bone formation rate achieved under the specific conditions of the protocol. Full weightbearing was allowed upon bridging the regenerated gap on three sides. Consolidation time was defined as the total number of days from the completion of the lengthening phase until adequate bone union (all three cortices healed) was achieved and full weightbearing was permitted. This time frame represents the entire healing process after the lengthening is complete divided by the amount of lengthening achieved (in cm). Patient follow-up was conducted meticulously at our institution, and we adhered to a precise schedule, occurring every 2 weeks during the distraction phase and every 4 weeks during the consolidation phase. There were no instances of loss to follow-up. Every patient completed the treatment successfully, reaching the specified milestones of weightbearing and achieving three cortexes of bone bridging., Results: The mean healing index time in the venting group was faster than that in the nonventing group (21 ± 6 days/cm versus 31 ± 22 days/cm, mean difference 10 ± 23 [95% CI 4 to 16]; p = 0.02). The mean consolidation time was faster in the venting group than the nonventing group (10 ± 6 days/cm versus 20 ± 22 days/cm; mean difference 10 ± 23 [95% CI 4 to 15]; p = 0.02). No medical complications such as deep vein thrombosis or fat or pulmonary embolism were seen. Two patients had lengthy delays in regenerate union, both of whom were in the nonventing group (healing indexes were 74 and 62 days/cm; consolidation time was 52 and 40 days/cm)., Conclusion: Femoral lengthening with a magnetic intramedullary lengthening nail healed more quickly with prereaming venting than with nonventing, and it allowed earlier full weightbearing without any major associated complications. Future studies should evaluate whether there is a correlation between the number of venting holes and improvement in the healing index and consolidation time., Level of Evidence: Level III, therapeutic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2024 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the Association of Bone and Joint Surgeons.)

Objective: This study aims to analyze the differences in mechanical stability of OTA/AO 31A1.3 intertrochanteric fractures under various reduction conditions., Methods: Twenty standard synbone artificial femur test bones were selected for the OTA/AO 31A1.3 intertrochanteric fracture model. The models were divided into five groups according to their reduction state: positive support, neutral support, negative support, varus fixation, and valgus fixation, with four specimens in each group. All models were fixed using PFNA intramedullary fixation and subjected to static axial compression tests. The subsidence displacement of the proximal femur under different loads and the axial stiffness of the model were measured to verify the mechanical stability of the OTA/AO 31A1.3 intertrochanteric fracture under different reduction conditions., Results: After the static axial compression test, the proximal femoral subsidence displacement in the positive support and neutral support groups was lower than that in the negative support, valgus fixation, and varus fixation groups (p < 0.001). The axial stiffness of the model was highest in the positive support group. Significant differences in subsidence displacement and axial stiffness were found between the groups (p < 0.001). The positive support group demonstrated the best mechanical stability, while the varus fixation group showed the poorest performance., Conclusion: Positive support of the medial cortex can be regarded as the best reduction state for OTA/AO 31A1.3 intertrochanteric fractures, suggesting that this approach should be preferred during surgery to enhance mechanical stability and improve clinical outcomes. Conversely, varus fixation should be avoided due to its inferior stability., (© 2024. The Author(s).)

Objectives: Osteoporosis is widely regarded as a typical aged-related disease caused by impaired bone remodeling. This research was designed to explore the protective effects of electroacupuncture (EA) on senile osteoporosis in a rat model and investigate the underlying mechanisms., Methods: Three-month-old rats were randomly selected as the youth group, and 24-month-old rats were randomly assigned to the elderly and EA groups. Rats in the EA group received 30 min of EA at bilateral SP10, ST36, K13 and GB34 daily, 5 days a week for 8 weeks. Bone mineral density (BMD), microstructure of the bone tissue, bone turnover biomarkers and expression level of autophagy-related proteins were detected., Results: Compared with the elderly group, EA treatment significantly increased BMD of the femur and ameliorated the microstructure. EA treatment increased trabecular bone volume ratio (= bone volume / total volume [BV/TV]) and trabecular number (Tb.N) and decreased trabecular separation (Tb.Sp) in senile osteoporosis rats. Compared with the elderly group, the serum N-terminal telopeptide of type I collagen (NTX1) level in the EA group was lower, and the serum procollagen type I N-terminal propeptide (PINP) concentration was higher. In addition, the expression of Beclin 1, microtubule-associated protein I light chain 3 (LC3B) and P62 was inhibited in the senile osteoporosis rats after EA treatment., Conclusions: EA can effectively alleviate aging-related bone loss and improve the microstructure of bone tissue in senile osteoporosis rats, and the regulation of autophagy might be one of the important mechanisms., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: Bisphosphonate (BP) can treat osteoporosis and prevent osteoporotic fractures in clinical. However, the effect of BP on microstructure and mechanical properties of cortical and trabecular bone has been taken little attention, separately., Methods: In this study, BP was used to intervene in ovariectomized female SD rats. The femoral micro-CT images were used to measure the structural parameters and reconstruct the 3D models in volume of interest. The structural parameters of cortical and trabecular bone were measured, and the mechanical properties were predicted using micro-finite element analysis., Results: There was almost no significant difference in the morphological structure parameters and mechanical properties of cortical bone between normal, ovariectomized (sham-OVX) and BP intervention groups. However, BP could significantly improve bone volume fraction (BV/TV) and trabecular separation (Tb.SP) in inter-femoral condyles (IT) (sham-OVX vs. BP, p < 0.001), and had no significant effect on BV/TV in medial and lateral femoral condyles (MT, LT). Similarly, BPs could significantly affect the effective modulus in IT (sham-OVX vs. BP, p < 0.001), and had no significant difference in MT and LT. In addition, the structural parameters and effective modulus showed a good linear correlation., Conclusion: In a short time, the effects of BP intervention and osteoporosis on cortical bone were not obvious. The effects of BP on trabecular bone in non-main weight-bearing area (IT) were valuable, while for osteoporosis, the main weight-bearing area (MT, LT) may improve the structural quality and mechanical strength of trabecular bone through exercise compensation., (© 2024. The Author(s).)

Purpose: This study aimed to conduct arthroscopic evaluation of cartilage electromechanical properties and establish their correlation with International Cartilage Repair Society (ICRS) grading scores., Methods: In 18 patients, quantitative parameter (QP) measurements were taken on the weight-bearing surface of the medial femoral condyle. Adjacently, the same site was graded using ICRS scores (0-4). Electromechanical QPs for ICRS grades 0 to 3 were obtained during arthroscopy, while complete grade 4 injuries were assessed using femur cartilage-bone blocks from knee arthroplasty. The QP values for ICRS grades 0 to 2 were compared with grades 3 and 4 using Welch t test. The corresponding QP values were assigned to ICRS grades 0 to 4 and compared using Welch ANOVA (analysis of variance). Pearson's coefficient evaluated QP-ICRS grade relationship., Results: Healthy grade 0 cartilage displayed a mean QP value of 10.5 (±2.8 SD, n = 4). The ICRS grade 1 and grade 2 injuries were associated with QP values of 12 (±0.7, n = 2) and 13.25 (±1.77, n = 2), respectively. The grade 3 defects had QP values of 20.43 (±4.84, n = 4), whereas complete grade 4 defects showed electromechanical values of 30.17 (±2.19, n = 6). Significant differences in QP values were observed between ICRS grades 0 to 2 (mean QP 11.56 ± 2.3, n = 8) and grades 3 and 4 (26.27 ± 6, n = 10; P < 0.0001). Pearson's correlation coefficient of 0.9 indicated a strong association between higher ICRS cartilage injury grades and elevated QP values ( P < 0.0001)., Conclusion: Arthroscopic electromechanical QP assessment robustly correlates with ICRS scores. The QP values for ICRS grades 0 to 2 are significantly lower, compared with grades 3 and 4., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Purpose: High body mass index (BMI) is a strong predictor of posttraumatic osteoarthritis (OA) after anterior cruciate ligament reconstruction (ACLR). Altered gait mechanics are independently affected by BMI and ACLR, and influence OA risk. Yet, evidence directly assessing the impact of high BMI on gait or cartilage characteristics after ACLR are limited. Here, we evaluated if high BMI moderates associations between gait and trochlear cartilage structure in individuals with ACLR., Methods: Treadmill walking biomechanics were evaluated in 40 normal BMI and 24 high BMI participants with ACLR at self-selected speeds. Normalized and absolute peak and cumulative loads (i.e., impulse) were extracted for peak knee flexion and adduction moments (KFM, KAM) and vertical ground reaction force (GRF). Medial and lateral femoral cartilage thickness and medial/lateral thickness ratios were assessed via ultrasound., Results: Those with ACLR and high BMI walked with reduced normalized peak vertical GRFs, and greater absolute peak and cumulative loads compared with normal BMI individuals with ACLR. Those with ACLR and high BMI also exhibited thinner cartilage and greater medial/lateral ratios in ACLR limbs compared with contralateral limbs whereas normal BMI individuals with ACLR exhibited thicker ACLR limb cartilage. Lastly, greater peak KAM and KAM cumulative load were associated with thicker lateral cartilage and lesser medial/lateral thickness ratios, but only in the high BMI group., Conclusions: We observed those with high BMI after ACLR exhibited trochlear cartilage structural alterations not observed in normal BMI patients, whereas differential associations between loading outcomes and cartilage thickness in ACLR knees were observed between groups. Those with high BMI after ACLR may require different therapeutic strategies to optimize joint health in this subset of patients., (Copyright © 2024 by the American College of Sports Medicine.)

It is unknown whether activity-based physical therapy (ABPT) modalities that mobilize the paralyzed limbs improve bone integrity at the highly fracture-prone epiphyseal regions of the distal femur and proximal tibia following severe spinal cord injury (SCI). In this study, 4-mo-old skeletally mature littermate-matched male Sprague-Dawley rats received either SHAM surgery or severe contusion SCI. At 1 wk postsurgery, SCI rats were stratified to undergo no-ABPT, two 20-min bouts/day of quadrupedal bodyweight-supported treadmill training (qBWSTT), or hindlimb passive isokinetic bicycle (cycle) training, 5 days/wk for another 3 wk. We assessed locomotor recovery and plantar flexor muscle mass, tracked cancellous and cortical bone microstructure at the distal femoral and proximal tibial epiphyses using in vivo microcomputed tomography (microCT), and evaluated bone turnover at the tibial epiphysis with histomorphometry. All SCI animals displayed persistent hindlimb paralysis and pervasive muscle atrophy. Over the initial 2 wk, which included 1 wk of no exercise and 1 wk of ABPT acclimation, a similar magnitude of bone loss developed in all SCI groups. Thereafter, cancellous bone loss and cortical bone decrements increased in the SCI no-ABPT group. qBWSTT attenuated this trabecular bone loss but did not prevent the ongoing cortical bone deficits. In comparison, twice-daily cycle training increased the number and activity of osteoblasts versus other SCI groups and restored all bone microstructural parameters to SHAM levels at both epiphyseal sites. These data indicate that a novel passive isokinetic cycle training regimen reversed cancellous and cortical bone deterioration at key epiphyseal sites after experimental SCI via osteoblast-mediated bone anabolic mechanisms, independent of locomotor recovery or increased muscle mass. NEW & NOTEWORTHY This study was the first to assess how quadrupedal bodyweight-supported treadmill training or passive isokinetic bicycle (cycle) training impacts bone recovery at the distal femoral and proximal tibial epiphyses in a rat model of severe contusion spinal cord injury. Our results demonstrate that passive isokinetic cycle training completely restored cancellous and cortical bone microstructural parameters at these sites via osteoblast-mediated bone anabolic actions, independent of locomotor recovery or increased plantar flexor muscle mass.

Objective: This study investigates the effects of a Brazil nut-enriched diet on body composition and bone parameters in CKD animal model., Methods: Male Wistar rats were assigned to the following groups: Sham (n=8), Nx (n=6), nephrectomized rats, and NxBN (n=6), nephrectomized rats and an enricheddiet with 5% Brazil nut. Body composition parameters were obtained by dual-energy X- ray absorptiometry (DXA). Bioclin kits determined plasmatic calcium. The femurs werecollected to determine absolute mass and length, bone mineral density, and biomechanical tests., Results: The NxBN group exhibited a higher total body bone mineral density (BMD) value than the Nx group (0.177±0.004g/cm 2 vs 0,169±0.003g/cm 2 ; p=0.0397). No significant differences were observed regarding absolute mass, length, BMD, and biomechanical parameters in the femurs of the groups. Moreover, no significant differences were found in plasmatic calcium levels among the groups., Conclusions: Brazil-nut enriched diet modulated BMD in CKD experimental model, and further studies are demanded to understand the pathways involved in this finding., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Competing Interests: The author certifies that there are no funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article related to the author or any immediate family members. All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request.

In addition to human donor bones, bone models made of synthetic materials are the gold standard substitutes for biomechanical testing of osteosyntheses. However, commercially available artificial bone models are not able to adequately reproduce the mechanical properties of human bone, especially not human osteoporotic bone. To overcome this issue, new types of polyurethane-based synthetic osteoporotic bone models have been developed. Its base materials for the cancellous bone portion and for the cortical portion have already been morphologically and mechanically validated against human bone. Thus, the aim of this study was to combine the two validated base materials for the two bone components to produce femur models with real human geometry, one with a hollow intramedullary canal and one with an intramedullary canal filled with synthetic cancellous bone, and mechanically validate them in comparison to fresh frozen human bone. These custom-made synthetic bone models were fabricated from a computer-tomography data set in a 2-step casting process to achieve not only the real geometry but also realistic cortical thicknesses of the femur. The synthetic bones were tested for axial compression, four-point bending in two planes, and torsion and validated against human osteoporotic bone. The results showed that the mechanical properties of the polyurethane-based synthetic bone models with hollow intramedullary canals are in the range of those of the human osteoporotic femur. Both, the femur models with the hollow and spongy-bone-filled intramedullary canal, showed no substantial differences in bending stiffness and axial compression stiffness compared to human osteoporotic bone. Torsional stiffnesses were slightly higher but within the range of human osteoporotic femurs. Concluding, this study shows that the innovative polyurethane-based femur models are comparable to human bones in terms of bending, axial compression, and torsional stiffness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: This study experimentally validated a computationally optimized screw number and screw distribution far cortical locking distal femur fracture plate and compared the results to traditional implants., Methods: 24 artificial femurs were osteotomized with a 10 mm fracture gap 60 mm proximal to the intercondylar notch. Three fixation constructs were used. (i) Standard locking plates secured with three far cortical locking screws inserted according to a previously optimized distribution in the femur shaft (n = 8). (ii) Standard locking plates secured with four standard locking screws inserted in alternating plate holes in the femur shaft (n = 8). (iii) Retrograde intramedullary nail secured proximally with one anterior-posterior screw and distally with two oblique screws (n = 8). Axial hip forces (700 and 2800 N) were applied while measuring axial interfragmentary motion, shear interfragmentary motion, and overall stiffness., Findings: Experimental far cortical locking plate results compared well to published computational findings. Far cortical locking femurs contained the highest axial motion within the potential ideal range of 0.2-1 mm and a sheer-to-axial motion ratio < 1.6 at toe-touch weight-bearing (700 N). At full weight-bearing (2800 N), Standard locking-plated femurs had the only axial motion within 0.2-1 mm but had an excess shear-to-axial motion ratio. Nail-implanted femurs underperformed at both forces., Interpretation: For toe-touch weight-bearing, the far cortical locking construct provided optimal biomechanics to allow moderate motion, which has been suggested to encourage early callus formation. Conversely, at full weight-bearing, the standard locking construct offered the biomechanical advantage on fracture motion., Competing Interests: Declaration of competing interest Emil H. Schemitsch previously received personal fees and research support from Zimmer Biomet. Radovan Zdero previously received “in kind” research support from Zimmer Biomet. No conflicts exist for the other authors., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Femoral derotation osteotomy is treatment of choice in intoeing gait secondary to cerebral palsy (CP)., Research Question: The aim of this study was to critically appraise the literature regarding the long-term outcomes of femoral derotation surgery in CP., Methods: Electronic databases of PubMed and Scopus was used for the literature review by two researchers independently (SB, SC). The study population included patients of cerebral palsy undergoing femoral derotation surgery. The keywords used were "cerebral palsy", "intoeing gait", "femur anteversion", "hip anteversion", "femur derotation" and "femur osteotomy"., Results: Nine studies which included 657 limbs in 407 patients were selected for this study of which eight were retrospective in nature. The improvement in hip rotation at stance at last follow up (more than five years) maintained a statistical significance (SMD 1.67 95 %CI 1.12-2.22). Similar statistically significant outcomes were noted for foot progression angle (SMD 1.19 95 %CI 0.92-1.47), anteversion (SMD 2.75 95 %CI 1.49-4.01) and total passive internal rotation (SMD 1.71 95 %CI 1.19-2.22)., Significance: Femoral derotation surgery is the procedure of choice for correction of intoeing gait in CP. Even though, there is deterioration of results on long-term as compared to short term, majority of the patients shall maintain overall correction without recurrence of an intoeing gait. Future studies with uniform criteria for defining recurrence on the basis of functional limitations shall provide better idea about the natural course of this procedure., Competing Interests: Declaration of Competing Interest No conflict, (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs., Methods: A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions., Findings: The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor., Interpretation: Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Bone Strain Index (BSI) is a new dual-energy x-ray absorptiometry (DXA)-based index. We retrospectively evaluated data from 153 postmenopausal women with a history of type 2 diabetes mellitus (T2DM). Lumbar spine and femoral Bone Strain Index (BSI) were sensitive to skeletal impairment in postmenopausal women suffering from T2DM., Purpose: Bone Strain Index (BSI) is a new dual-energy X-ray absorptiometry (DXA)-based measurement. We evaluated the performance of BSI in predicting the presence of fragility fractures in type 2 diabetes mellitus (T2DM) postmenopausal women., Methods: We retrospectively evaluated data from a case-control study of 153 postmenopausal women with a history of at least 5 years of T2DM (age from 40 to 90 years). For each subject, we assessed the personal or familiar history of previous fragility fractures and menopause age, and we collected data about bone mineral density (BMD), BSI, and Trabecular Bone Score (TBS) measurements. Statistical analysis was performed having as outcome the history of fragility fractures., Results: Out of a total of 153 subjects, n = 22 (14.4%) presented at least one major fragility fracture. A negative correlation was found between lumbar BSI and lumbar BMD (r =  - 0.49, p < 0.001) and between total femur BSI and total femur BMD (r =  - 0.49, p < 0.001). A negative correlation was found between femoral neck BSI and femoral neck BMD (r =  - 0.22, p < 0.001). Most DXA-based variables were individually able to discriminate between fractured and non-fractured subjects (p < 0.05), and lumbar BSI was the index with the most relative difference between the two populations, followed by femoral BSI., Conclusion: Lumbar spine and femoral BSI are sensitive to skeletal impairment in postmenopausal women suffering from T2DM. The use of BSI in conjunction with BMD and TBS can improve fracture risk assessment., (© 2024. The Author(s).)

Objective: The thickness of the lateral femoral wall, which is an important indicator for evaluating the stability and integrity of intertrochanteric fractures, has been widely studied in recent years. However, as a typical representative of internal fixation treatment, there are few reports on the biomechanical comparison between PFNA and DHS + CS. This study focused primarily on the biomechanical effects of different lateral femoral wall thicknesses on two types of internal fixation through finite element analysis., Methods: We randomly recruited a healthy adult and collected his femoral CT data to establish a model of femoral intertrochanteric fracture with different lateral femoral wall thicknesses. Following PFNA and DHS + CS fixation, femoral models were simulated, and variations in stress and displacement of the internal fixation and femoral head were recorded under the same physiological load., Results: First, finite element mechanical analysis revealed that the stress and displacement of the internal fixation and femoral head were lower in the femoral model after PFNA fixation than in the DHS + CS model. Second, as the outer wall thickness decreased, the stress and deformation endured by both types of internal fixation gradually increased., Conclusions: Finite element analysis determined that PFNA exhibits significantly better biomechanical stability than DHS + CS when subjected to varying lateral femoral wall thicknesses. Moreover, lateral femoral wall thickness substantially affects the stability of the two internal fixation biomechanical environments. When the thickness of the lateral femoral wall is too small, we do not recommend using extramedullary fixation because there is a significant risk of internal fixation fracture., (© 2024. The Author(s).)

Introduction: Although there has been abundant evidence of the association between dyslipidemia as a single factor and osteoporosis, the non-linear relationship between osteoporosis and the Atherogenic Index of Plasma (AIP) has not yet been thoroughly investigated. This study aimed to investigate the complex relationship between AIP and bone mineral density (BMD) to elucidate their interrelationship., Methods: An analysis of 2007-2018 National Health and Nutrition Survey (NHANES) data was conducted for this study. The study enrolled 5,019 participants. Logarithmically multiplying triglycerides and high-density lipoprotein cholesterol yields the AIP (base 10). The measured variables consisted of BMD in the total femur (TF), femoral neck (FN), and lumbar spine (LS). The association between AIP and BMD was examined using a range of statistical models, such as weighted multivariable logistic regression, generalized additive model, etc. RESULTS: It was found that AIP was positively associated with BMD after adjusting for age, gender, race, socioeconomic status, degree of education, income, Consuming alcoholic beverages, osteoporosis status (Yes or No), ALT, AST, serum creatinine, and total calcium levels. Further studies supported the association link between elevated BMD and AIP. Furthermore, compared to men, females had a higher positive connection between AIP and BMD. In general, there was a curve in the reverse L-shape seen, with a point of change around 0.877, indicating a relationship between AIP and TF BMD. Moreover, a curve exhibiting an L-formed pattern, with a point of inflection at around 0.702, was seen between AIP and FN BMD. In addition, a J-shaped curve was seen, with a point of inflection at 0.092, which demonstrates the association between AIP and LS BMD., Conclusion: The AIP and TF BMD curves resemble inverted L shapes, as do the AIP and FN BMD curves. The relationship between AIP and LS BMD was further demonstrated by a J-shaped curve. The results indicate a possible association between AIP and bone mineral density, which should be explored in more detail., (© 2024. The Author(s).)

Background: Slipped capital femoral epiphysis is a prevalent pediatric hip disorder. Recent studies suggest the spine's sagittal profile may influence the proximal femoral growth plate's slippage, an aspect not extensively explored. This study utilizes finite element analysis to investigate how various spinopelvic alignments affect shear stress and growth plate slip., Methods: A finite element model was developed from CT scans of a healthy adult male lumbar spine, pelvis, and femurs. The model was subjected to various sagittal alignments through reorientation. Simulations of two-leg stance, one-leg stance, walking heel strike, ascending stairs heel strike, and descending stairs heel strike were conducted. Parameters measured included hip joint contact area, stress, and maximum growth plate Tresca (shear) stress., Findings: Posterior pelvic tilt cases indicated larger shear stresses compared to the anterior pelvic tilt variants except in two leg stance. Two leg stance resulted in decreases in the posterior tilted pelvi variants hip contact and growth plate Tresca stress compared to anterior tilted pelvi, however a combination of posterior pelvic tilt and high pelvic incidence indicated larger shear stresses on the growth plate. One leg stance and heal strike resulted in higher shear stress on the growth plate in posterior pelvic tilt variants compared to anterior pelvic tilt, with a combination of posterior pelvic tilt and high pelvic incidence resulting in the largest shear., Interpretation: Our findings suggest that posterior pelvic tilt and high pelvic incidence may lead to increased shear stress at the growth plate. Activities performed in patients with these alignments may predispose to biomechanical loading that shears the growth plate, potentially leading to slip., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: Metastatic femoral tumors may lead to pathological fractures during daily activities. A CT-based finite element analysis of a patient's femurs was shown to assist orthopedic surgeons in making informed decisions about the risk of fracture and the need for a prophylactic fixation. Improving the accuracy of such analyses ruqires an automatic and accurate segmentation of the tumors and their automatic inclusion in the finite element model. We present herein a deep learning algorithm (nnU-Net) to automatically segment lytic tumors within the femur., Method: A dataset consisting of fifty CT scans of patients with manually annotated femoral tumors was created. Forty of them, chosen randomly, were used for training the nnU-Net, while the remaining ten CT scans were used for testing. The deep learning model's performance was compared to two experienced radiologists., Findings: The proposed algorithm outperformed the current state-of-the-art solutions, achieving dice similarity scores of 0.67 and 0.68 on the test data when compared to two experienced radiologists, while the dice similarity score for inter-individual variability between the radiologists was 0.73., Interpretation: The automatic algorithm may segment lytic femoral tumors in CT scans as accurately as experienced radiologists with similar dice similarity scores. The influence of the realistic tumors inclusion in an autonomous finite element algorithm is presented in (Rachmil et al., "The Influence of Femoral Lytic Tumors Segmentation on Autonomous Finite Element Analyses", Clinical Biomechanics, 112, paper 106192, (2024))., Competing Interests: Declaration of competing interest None., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Articular cartilage exhibits site-specific biomechanical properties. However, no study has comprehensively characterized site-specific cartilage properties from the same knee joints at different stages of osteoarthritis (OA). Cylindrical osteochondral explants (n = 381) were harvested from donor-matched lateral and medial tibia, lateral and medial femur, patella, and trochlea of cadaveric knees (N = 17). Indentation test was used to measure the elastic and viscoelastic mechanical properties of the samples, and Osteoarthritis Research Society International (OARSI) grading system was used to categorize the samples into normal (OARSI 0-1), early OA (OARSI 2-3), and advanced OA (OARSI 4-5) groups. OA-related changes in cartilage mechanical properties were site-specific. In the lateral and medial tibia and trochlea sites, equilibrium, instantaneous and dynamic moduli were higher (p < 0.001) in normal tissue than in early and advanced OA tissue. In lateral and medial femur, equilibrium, instantaneous and dynamic moduli were smaller in advanced OA, but not in early OA, than in normal tissue. The phase difference (0.1-0.25 Hz) between stress and strain was significantly smaller (p < 0.05) in advanced OA than in normal tissue across all sites except medial tibia. Our results indicated that in contrast to femoral and patellar cartilage, equilibrium, instantaneous and dynamic moduli of the tibia and trochlear cartilage decreased in early OA. These may suggest that the tibia and trochlear cartilage degrades faster than the femoral and patellar cartilage. The information is relevant for developing site-specific computational models and engineered cartilage constructs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Pulmonary arterial hypertension (PAH) is characterized by right ventricular failure and diminished cardiac output, potentially leading to renal and bone impairments. In contrast, resistance exercise training (RT) offers cardiovascular and bone health benefits. This study aimed to assess the impacts of stable PAH induced by monocrotaline (MCT) and RT on renal morphometry, as well as bone morphometry and biomechanical properties in male Wistar rats. Four experimental groups, untrained control (UC, n=7), trained control (TC, n=7), untrained hypertensive (UH, n=7), trained hypertensive (TH, n=7), were defined. After the first MCT or saline injection (20 mg/kg), trained rats were submitted to a RT program (i.e., Ladder climbing), 5 times/week. Seven days later the rats received the second MCT or saline dose. After euthanasia, renal and femoral histomorphometry and femoral biomechanical properties were assessed. PAH reduced renal glomerular area and volume, which was prevented by the RT. While PAH did not harm the femoral morphometry, structural and mechanical properties, RT improved the femoral parameters (e.g., length, percentage of trabeculae and bone marrow, ultimte and yield loads). Experimental stable PAH promotes renal but not bone damages, whereas RT prevents renal deteriorations and improves the femoral morphological and biomechanical properties.

Background: Anatomical landmarks and range-of-motion (ROM) techniques are commonly used to rotationally align the tibial component in total knee arthroplasty (TKA). This study investigated; 1) the difference in tibial rotational alignment between the ROM technique and Akagi's line, 2) the influence of preoperative deformity and intraoperative gaps on this difference, and 3) intraoperative tibial rotational kinematics associated with these 2 techniques., Methods: Patients who underwent cruciate-substituting (CS) TKA (Evolution, Microport Orthopedics) for knee osteoarthritis were enrolled. Intraoperatively, the rotational alignment of the tibial component was determined with the ROM technique and recorded. The difference from the value determined using Akagi's line was evaluated. Correlations among preoperative coronal deformity, postoperative coronal alignment, and intraoperative gaps between the femur and tibia were evaluated. Differences in knee kinematics (rotational movement of the tibia against the femur) between the 2 techniques were compared., Results: This study included 34 knees from 34 patients. The rotational alignment of the tibial component using the ROM technique was 2.5±6.4° externally rotated in relation to that determined using Akagi's line (p=0.029), which was increased in knees with a smaller preoperative medial proximal tibial angle (r=0.45). Tibial rotational kinematics did not significantly differ between the 2 techniques., Conclusions: The ROM technique and Akagi's line yielded significantly different values for the rotational alignment of the tibial component. Orthopedic surgeons using Evolution (CS) should be reminded that in knees with proximal tibial varus deformity, the ROM technique will result in external rotation of the tibial component in relation to Akagi's line.

Case: An 18-year-old man with 48° of internal malrotation of the femur after nailing underwent derotational osteotomy with gait dynamics and electromyography data collected preoperatively and postoperatively. Hip abduction and internal foot progression angles were significantly deviated from normal preoperatively compared with the contralateral side. At 10 months postoperatively, the hip was abducted and externally rotated throughout the entire gait cycle. His Trendelenburg gait had resolved, and he reported no residual functional concerns. Before corrective osteotomy, walking velocity was significantly slower with shorter stride lengths., Conclusion: Significant internal malrotation of the femur impairs hip abduction and foot progression angles as well as gluteus medius activation during ambulation. Derotational osteotomy considerably corrected these values., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJSCC/B976)., (Copyright © 2022 by The Journal of Bone and Joint Surgery, Incorporated.)

Matrix Gla protein (MGP) is mostly known to be a calcification inhibitor, as its absence leads to ectopic calcification of different tissues such as cartilage or arteries. MGP deficiency also leads to low bone mass and delayed bone growth. In the present contribution, we investigate the effect of MGP deficiency on the structural and material mechanical bone properties by focusing on the elastic response of femurs undergoing three-points bending. To this aim, biomechanical tests are performed on femurs issued from Mgp-deficient mice at 14, 21, 28, and 35 days of postnatal life and compared to healthy control femurs. µCT acquisitions enable to reconstruct bone geometries and are used to construct subject-specific finite element models avoiding some of the reported limitations concerning the use of beam-like assumptions for small bone samples. Our results indicate that MGP deficiency may be associated to differences in both structural and material properties of femurs during early stages of development. MGP deficiency appears to be related to a decrease in bone dimensions, compensated by higher material properties resulting in similar structural bone properties at P35. The search for a unique density-elasticity relationship based on calibrated bone mineral density (BMD) indicates that MGP deficiency may affect bone tissue in several ways, that may not be represented uniquely from the quantification of BMD. Despite of its limitation to elastic response, the present preliminary study reports for the very first time the mechanical skeletal properties of Mgp-deficient mice at early stages of development.

Severe predictions have been made regarding osteoporotic fracture incidence for the next years, with major economic and social impacts in a worldwide greying society. However, the performance of the currently adopted gold standard for fracture risk prediction, the areal Bone Mineral Density (aBMD), remains moderate. To overcome current limitations, the construction of statistical models of the proximal femur, based on three-dimensional shape and intensity (a hallmark of bone density), is here proposed for predicting hip fracture in a Caucasian postmenopausal cohort. Partial Least Square (PLS)-based statistical models of the shape, intensity and their combination were developed, and the corresponding modes and components were identified. Logistic regression models using the first two shape, intensity and shape-intensity PLS components were implemented and tested within a 10-fold cross-validation procedure as predictors of hip fracture. It emerged that (1) intensity components were superior to shape components in stratifying patients according to their fracture status, and that (2) a combination of intensity and shape improved patients risk stratification. The area under the ROC curve was 0.64, 0.85 and 0.92 for the models based on shape, intensity and shape-intensity combination respectively, against a 0.72 value for the aBMD standard approach. Based on these findings, the presented methodology turns out to be promising in tackling the need for an enhanced fracture risk assessment., (© 2022. The Author(s).)

The progression of chronic kidney disease (CKD) in children is associated with deregulated parathyroid hormone (PTH), growth retardation, and low bone accrual. PTH can cause both catabolic and anabolic impact on bone, and the activating transcription factor 4 (ATF4), a downstream target gene of PTH, is related to its anabolic effect. Osteoprotegerin (OPG) and receptor activator of NF-κB ligand (RANKL) are PTH-dependent cytokines, which may play an important role in the regulation of bone remodeling. This study aimed to evaluate the impact of endogenous PTH and the bone RANKL/OPG system on bone growth, cross-sectional geometry and strength utilizing young, nephrectomized rats. The parameters of cross-sectional geometry were significantly elevated in rats with CKD during the three-month experimental period compared with the controls, and they were strongly associated with serum PTH levels and the expression of parathyroid hormone 1 receptor (PTH1R)/ATF4 genes in bone. Low bone soluble RANKL (sRANKL) levels and sRANKL/OPG ratios were also positively correlated with cross-sectional bone geometry and femoral length. Moreover, the analyzed geometric parameters were strongly related to the biomechanical properties of femoral diaphysis. In summary, the mild increase in endogenous PTH, its anabolic PTH1R/ATF4 axis and PTH-dependent alterations in the bone RANKL/OPG system may be one of the possible mechanisms responsible for the favorable impact on bone growth, cross-sectional geometry and strength in young rats with experimental CKD., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Fracture healing is regulated by mechanical loading. Understanding the underlying mechanisms during the different healing phases is required for targeted mechanical intervention therapies. Here, the influence of individualized cyclic mechanical loading on the remodelling phase of fracture healing was assessed in a non-critical-sized mouse femur defect model. After bridging of the defect, a loading group (n = 10) received individualized cyclic mechanical loading (8-16 N, 10 Hz, 5 min, 3 × /week) based on computed strain distribution in the mineralized callus using animal-specific real-time micro-finite element analysis with 2D/3D visualizations and strain histograms. Controls (n = 10) received 0 N treatment at the same post-operative time-points. By registration of consecutive scans, structural and dynamic callus morphometric parameters were followed in three callus sub-volumes and the adjacent cortex showing that the remodelling phase of fracture healing is highly responsive to cyclic mechanical loading with changes in dynamic parameters leading to significantly larger formation of mineralized callus and higher degree of mineralization. Loading-mediated maintenance of callus remodelling was associated with distinct effects on Wnt-signalling-associated molecular targets Sclerostin and RANKL in callus sub-regions and the adjacent cortex (n = 1/group). Given these distinct local protein expression patterns induced by cyclic mechanical loading during callus remodelling, the femur defect loading model with individualized load application seems suitable to further understand the local spatio-temporal mechano-molecular regulation of the different fracture healing phases., (© 2021. The Author(s).)

Rotational deformities following intramedullary (IM) nailing of tibia has a reported incidence of as high as 20%. Common techniques to measure deformities following IM nailing of tibia are either based on clinical assessment, plain X-rays or Computed Tomography (CT) comparing the treated leg with the uninjured contralateral side. All these techniques are based on examiners manual calculation inherently subject to bias. Following our previous rigorous motion analysis and symmetry studies on hemi pelvises, femurs and orthopaedic implants, we aimed to introduce a novel fully digital technique to measure rotational deformities in the lower legs. Following formal institutional approval from the Imperial College, CT images of 10 pairs of human lower legs were retrieved. Images were anonymized and uploaded to a research server. Three dimensional CT images of the lower legs were bilaterally reconstructed. CT-based motion analysis (CTMA) was used and the mirrored images of the left side were merged with the right side proximally as stationary and distally as moving objects. Discrepancies in translation and rotation were automatically calculated. Our study population had a mean age of 54 ± 20 years. There were six males and four females. We observed a greater variation in translation (mm) of Centre of Mass (COM) in sagittal plane (95% CI - 2.959-.292) which was also presented as rotational difference alongside the antero-posterior direction or Y axis (95% CI .370-1.035). In other word the right lower legs in our study were more likely to be in varus compared to the left side. However, there were no statistically significant differences in coronal or axial planes. Using our proposed fully digital technique we found that lower legs of the human adults were symmetrical in axial and coronal plane. We found sagittal plane differences which need further addressing in future using bigger sample size. Our novel recommended technique is fully digital and commercially available. This new technique can be useful in clinical practice addressing rotational deformities following orthopaedic surgical intervention. This new technique can substitute the previously introduced techniques., (© 2021. The Author(s).)

Background: Rheumatoid arthritis (RA) and metabolic syndrome (MetS) are chronic conditions that share common inflammatory mechanisms. Both diseases can lead to an impairment of the bone microarchitecture. The aims of our study were to evaluate clinical, metabolic, and bone parameters in RA patients with or without MetS (MetS+, MetS-) and potential correlations between the glico-lipidic profile, RA disease activity, and bone status. Methods: A total of thirty-nine RA female post-menopausal patients were recruited (median age 66.6 ± 10.4, disease duration 3 ± 2.7). Anthropometric data, medical history, and current treatment were recorded along with basal blood tests, bone, and lipid metabolism biomarkers. RA disease activity and insulin resistance were evaluated through standard scores. Quantitative assessment of the bone (bone mineral density-BMD) was performed by dual-energy-X ray absorption (DXA), whereas bone quality was quantified with the trabecular bone score (TBS). Results: No statistically significant differences concerning both BMD and TBS were detected between the MetS+ and MetS- RA patients. However, the MetS+ RA patients exhibited significantly higher disease activity and lower serum 25-hydroxyvitamin D [25(OH)D] concentrations (respectively, p = 0.04 and p = 0.01). In all RA patients, a significant negative correlation emerged between the BMD of the femoral trochanter with plasmatic triglycerides (TG) concentrations (r = -0.38, p = 0.01), whereas the lumbar BMD was positively correlated with the abdominal waist (AW) and fasting glucose (FG) concentrations. On the other hand, the TBS was negatively correlated with insulin concentrations, FG, and RA disease activity (respectively, r = -0.45, p = 0.01, r = -0.40, p = 0.03, r = -0.37, p = 0.04), the last one was further negatively correlated with 25-OHD serum concentrations (r = -0.6, p = 0.0006) and insulin-resistance (r = 0.3, p = 0.04). Conclusions: Bone quantity (BMD) and quality (TBS) do not seem significantly changed among MetS+ and MetS- RA patients; however, among MetS+ patients, both significantly higher disease activity and lower vitamin D serum concentrations were observed. In addition, the significant negative correlations between the alterations of metabolic parameters limited to the TBS in all RA patients might suggest that qualitative bone microarchitecture impairments (TBS) might manifest despite unchanged BMD values.

Osteoarthritis (OA) degrades articular cartilage and weakens its function. Modern fibril-reinforced poroelastic (FRPE) computational models can distinguish the mechanical properties of main cartilage constituents, namely collagen, proteoglycans, and fluid, thus, they can precisely characterize the complex mechanical behavior of the tissue. However, these properties are not known for human femoral condyle cartilage. Therefore, we aimed to characterize them from human subjects undergoing knee replacement and from deceased donors without known OA. Multi-step stress-relaxation measurements coupled with sample-specific finite element analyses were conducted to obtain the FRPE material properties. Samples were graded using OARSI scoring to determine the severity of histopathological cartilage degradation. The results suggest that alterations in the FRPE properties are not evident in the moderate stages of cartilage degradation (OARSI 2-3) as compared with normal tissue (OARSI 0-1). Drastic deterioration of the FRPE properties was observed in severely degraded cartilage (OARSI 4). We also found that the FRPE properties of femoral condyle cartilage related to the collagen network (initial fibril-network modulus) and proteoglycan matrix (non-fibrillar matrix modulus) were greater compared to tibial and patellar cartilage in OA. These findings may inform cartilage tissue-engineering efforts and help to improve the accuracy of cartilage representations in computational knee joint models., (© 2021. The Author(s).)

Backgroud: Femoral internal rotation in total knee arthroplasty (TKA) is well known as one of the main causes of patellar maltracking. Although femoral internal rotation in TKA is considered unacceptable due to the risk of patellar maltracking, it is sometimes required for ligament balancing. We evaluated the influence of femoral internal rotation on patellar tracking in TKA performed using the gap technique., Methods: From April 2008 to May 2018, 1,612 cases of TKA were done. Among them, 245 cases of TKA for osteoarthritis were followed up for at least 1 year and included in this study. We compared patellar tracking in two groups; group I consisted of 99 cases whose femoral rotation was less than 0° and group II consisted of 146 cases whose femoral rotation was 3°-5° external rotation. Preoperative femoral rotation was measured with the condylar twist angle (CTA) by using computed tomography. The patella was replaced in all cases. Patellar tracking was evaluated with patellar tilt angle (lateral tilt [+] and medial tilt [-]) in the merchant radiograph. Statistical analysis was done using Mann-Whitney U -test. Clinical assessment was performed using the Knee Society clinical rating system., Results: The preoperative CTA was 5.3° ± 1.6° in group I and 5.4° ± 1.6° in group II, showing no statistically significant difference between groups ( p = 0.455). Intraoperative femoral rotation was -0.5° ± 0.8° in group I and 3.9° ± 0.8° in group II when the gap technique was used ( p < 0.001). The postoperative patellar tilt angle was -0.4° ± 3.6° in group I and 0.1° ± 4.1° in group II with no statistically significant difference ( p = 0.251)., Conclusions: Compared with femoral external rotation, femoral internal rotation with ligament balance in TKA was not more associated with patellar maltracking. Therefore, patellar tracking might be related with ligament balance in flexion regardless of the anatomic femoral rotational alignment., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported., (Copyright © 2021 by The Korean Orthopaedic Association.)

This study aimed to compare the contact area, mean pressure, and peak pressure of the radiocapitellar joint (RCJ) in the upper limb after transradial amputation with those of the normal upper limb during elbow flexion and forearm rotation. Testing was performed using ten fresh-frozen upper limbs, and the transradial amputation was performed 5 cm proximal to the radial styloid process. The specimens were connected to a custom-designed apparatus for testing. A pressure sensor was inserted into the RCJ. The biomechanical indices of the RCJ were measured during elbow flexion and forearm rotation in all specimens. There was no significant difference in the contact area between the normal and transradial amputated upper limbs. However, in the upper limbs after transradial amputation, the mean pressure was higher than that in the normal upper limbs at all positions of elbow flexion and forearm rotation. The peak pressure was significantly higher in the upper limbs after transradial amputation than in the normal upper limbs, and was especially increased during pronation at 45° of elbow flexion. In conclusion, these results could cause cartilage erosion in the RCJ of transradial amputees. Thus, methods to reduce the pressure of the RCJ should be considered when a myoelectric prosthesis is developed.

Rotational malreduction is a common yet underreported postoperative complication following intramedullary nailing of long bone fractures. In most situations, this can be prevented at the time of initial surgery with meticulous preoperative planning, careful use of intraoperative fluoroscopy, and awareness of risk factors for malrotation. However, rotational alignment remains difficult to assess by clinical examination so a high index of suspicion is always necessary. Here, the authors review the literature on this complication and report on 3 such cases of femoral and the tibial malrotation, methods for calculating femoral version and tibial torsion, and techniques for correcting these deformities., Competing Interests: Disclosure M. Sullivan: paid consultant for Depuy Synthes; AOTrauma paid speaker. K. Bonilla: nothing to disclose. D. Donegan: paid consultant for Depuy Synthes, Stryker, and Zimmer Biomet; AOTrauma paid speaker; cofounder and managing partner for ORtelligence Inc., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Background: Compliant compression fixation was developed to promote permanent bone-prosthesis osteointegration while preserving bone stock in patients needing endoprosthetic reconstructions. This has demonstrated durability in the distal femur, with reliable cortical hypertrophy adjacent to the implant. However, the extent of bone formation and prosthetic survivorship of proximal femoral replacements with compliant compression fixation has not been established., Questions/purposes: (1) How much bone formation occurs across the compression segment in patients treated with a proximal femoral replacement implant using compliant compression fixation? (2) What were the Musculoskeletal Tumor Society (MSTS) scores at minimum 24-month follow-up of patients who received this reconstruction? (3) What is the implant survivorship free from implant removal or revision for any reason at final follow-up?, Methods: From 2006 to 2018, we performed 213 proximal femoral replacements in patients with oncologic conditions of the proximal femur where the trochanters could not be preserved. Of these, 6% (12 of 213) were performed with an implant that used compliant compression fixation. We used this device in primary oncologic reconstructions in patients younger than 65 years of age without metastases who had nonirradiated bone with the requisite ≥ 2.5 mm of cortical thickness in the hope that it would provide more durable fixation and bone stock preservation than conventional reconstructions. All patients were followed for longer than 2 years except one who died in that interval. Median (range) follow-up was 6 years (2 to 10 years). Seven patients received diagnosis-specific chemotherapy in a consistent manner based on Children's Oncology Group chemotherapy protocols. Using the NIH-developed ImageJ open-access software, we measured the area of bone under compression on 3-, 6-, 9-, 12-, 18-, and 24-month radiographs and the length of the traction bar potential-compression distance, reconciling independent measures from two investigators using the identical method as published for the distal femur with compression fixation. The duration of prosthesis retention was evaluated using a competing risk analysis for the 11 surviving patients., Results: Bone hypertrophy in the compression segment was scant. At the final analysis, cortical bone formation was a median (range) of 4 (-7 to 14) above baseline. The median (range) MSTS score was 27 (19 to 30). One implant failed after trauma, and the patient underwent revision of the implant., Conclusion: Despite scant bone formation across the compression segment and drastically less formation than reported for distal femoral replacements, compliant compression fixation of the proximal femur demonstrated good survivorship in patients 65 years or younger with localized sarcoma and nonirradiated, adequate bone stock in this small, retrospective series. Patients achieved good functional outcomes at final follow-up. The potential benefit of this reconstruction method should be weighed against the initial period of limited weightbearing and the life expectancy of the patient., Level of Evidence: Level IV, cohort study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2021 by the Association of Bone and Joint Surgeons.)

Purpose: To compare clinical and radiological outcomes and failure rates between anatomical and high femoral tunnels in remnant-preserving single-bundle posterior cruciate ligament (PCL) reconstruction., Methods: 63 patients who underwent remnant-preserving single-bundle PCL reconstruction between 2011 and 2018 with a minimum 2-year follow-up were retrospectively reviewed. Patients were divided into two groups according to the femoral tunnel position: group A (33 patients with anatomical femoral tunnel) and group H (30 patients with high femoral tunnels). The femoral tunnel was positioned at the center (group A) or upper margin (group H) of the remnant anterolateral bundle. The position of the femoral tunnel was evaluated using the grid method on three-dimensional computed tomography. Clinical and radiological outcomes and failure rates were compared between the groups at the 2-year follow-up., Results: The position of the femoral tunnel was significantly high in group H than in group A (87.4% ± 4.2% versus 76.1% ± 3.7%, p < 0.001). Clinical outcomes were not significantly different between the two groups in terms of the clinical scores (International Knee Documentation Committee subjective, Lysholm, and Tegner activity scores), range of motion, and posterior drawer test. Radiological outcomes also showed no intergroup differences in the side-to-side differences of posterior tibial translation and osteoarthritis progression. Side-to-side difference on the Telos stress radiograph was 5.2 ± 2.9 mm in group A and 5.2 ± 2.7 mm in group H (n.s.). There were four failures in group A (12.1%) and one in group H (3.3%). The differences between the groups were not statistically significant., Conclusion: The clinical and radiological outcomes and failure rates of the high femoral tunnels were comparable with those of the anatomical femoral tunnels at the 2-year follow-up after remnant-preserving single-bundle PCL reconstruction. The findings of this study suggest that high femoral tunnels can be considered an alternative in remnant-preserving single-bundle PCL reconstruction., Level of Evidence: III.

Background: Some studies have suggested that women have poorer short-term outcomes after unicompartmental knee arthroplasty (UKA) due to a higher incidence of implant overhang. This study aimed to compare patient-reported outcome measures (PROMs) between men and women after UKA at a minimum follow-up of 10 years., Methods: Patients who underwent medial fixed-bearing UKA by two arthroplasty surgeons were identified from an institutional joint registry. Men and women were matched for age, body mass index, Charlson Comorbidity Index, American Society of Anesthesiologists class, range-of-motion and baseline PROMs using propensity scores. PROMs were compared at 2 and 10 years. Patients also completed a satisfaction questionnaire during these visits. Radiographic outliers were defined as > 2 mm of overhang., Results: A total of 128 patients were included. There was no difference in complications, length of stay or readmissions. Women had poorer Knee Society functional scores, Short-Form 36 physical and mental component scores (SF-36 MCS) at 2 years. No difference in PROMs was found at 10 years, except for poorer SF-36 MCS in women (P = 0.041). At 10 years, 96% of women and 92% of men were satisfied (P = 0.243). Fifteen-year survivorship free from any revision was 96% in each group. There were more medial-tibial outliers in women (9%) compared with men (5%) (P = 0.018). However, no association between outliers and outcomes or survivorship was found on multivariate analyses., Conclusion: There was nodifference in clinical outcomes between men and women undergoing UKA at a minimum follow-up of 10 years. While women had a higher incidence of medial tibial overhang, this was not associated with long-term outcomes or survivorship., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Background: Placement of femoral stem in excessive anteversion or retroversion can cause reduced range of motion, prosthetic impingement, and dislocation. The aim of this study was to assess the operative femoral anteversion in patients treated with total hip arthroplasty (THA) and analyze the need of adjusting stem anteversion., Methods: We retrospectively included 101 patients (126 hips) who underwent cementless THA with a manual goniometer to determine the femoral anteversion between October 2017 and December 2018. The operative femoral anteversion we measured was recorded during THA. We further divided those hips into three subgroups based on the range of operative femoral anteversion: group 1 (<10°), group 2 (10-30°), and group 3 (>30°) and compared the differences of their demographic data. Univariate and multivariate logistic regression were used to identify the influencing factors for the need of neck-adjustable femoral stem. The clinical and radiographic outcomes were also assessed. Perioperative complications were recorded., Results: After THA, the Harris hip scores improved from 52.87 ± 15.30 preoperatively to 90.04 ± 3.31 at the last follow-up (p < 0.001). No implant loosening, stem subsidence, and radiolucent lines were observed on radiographs. No severe complications occurred and no components needed revision at the latest follow-up. The mean operative femoral anteversion was 14.21° ± 11.80° (range, -9 to 60°). Patients with femoral anteversion more than 30° were about 10 years younger than others. Femoral anteversion >30° was more common in patients with developmental dysplasia of the hip (DDH). There were totally 14 hips treated with the neck-adjustable femoral stem. From the univariate analysis, we can observe that female sex, diagnosis of DDH (compared with osteonecrosis), and higher operative femoral anteversion and its value >30° (compared with <10°) are associated with higher rates of using the neck-adjustable femoral stem. However, all these factors were no longer considered as independent influencing factors when mixed with other factors., Conclusions: This study highlighted the significance of operative femoral anteversion. Identification of abnormal femoral anteversion could assist in adjusting stem anteversion and reduce the risk of dislocation after THA.

Background: Contemporary studies have described the rotational mechanism in patients with slipped capital femoral epiphysis (SCFE). However, there have been limited patient imaging data and information to quantify the rotation. Determining whether the epiphysis is rotated or translated and measuring the epiphyseal displacement in all planes may facilitate planning for surgical reorientation of the epiphysis., Questions/purposes: (1) How does epiphyseal rotation and translation differ among mild, moderate, and severe SCFE? (2) Is there a correlation between epiphyseal rotation and posterior or inferior translation in hips with SCFE? (3) Does epiphyseal rotation correlate with the size of the epiphyseal tubercle or the metaphyseal fossa or with epiphyseal cupping?, Methods: We identified 51 patients (55% boys [28 of 51]; mean age 13 ± 2 years) with stable SCFE who underwent preoperative CT of the pelvis before definitive treatment. Stable SCFE was selected because unstable SCFE would not allow for accurate assessment of rotation given the complete displacement of the femoral head in relation to the neck. The epiphysis and metaphysis were segmented and reconstructed in three-dimensions (3-D) for analysis in this retrospective study. One observer (a second-year orthopaedic resident) performed the image segmentation and measurements of epiphyseal rotation and translation relative to the metaphysis, epiphyseal tubercle, metaphyseal fossa, and the epiphysis extension onto the metaphysis defined as epiphyseal cupping. To assess the reliability of the measurements, a randomly selected subset of 15 hips was remeasured by the primary examiner and by the two experienced examiners independently. We used ANOVA to calculate the intraclass and interclass correlation coefficients (ICCs) for intraobserver and interobserver reliability of rotational and translational measurements. The ICC values for rotation were 0.91 (intraobserver) and 0.87 (interobserver) and the ICC values for translation were 0.92 (intraobserver) and 0.87 (intraobserver). After adjusting for age and sex, we compared the degree of rotation and translation among mild, moderate, and severe SCFE. Pearson correlation analysis was used to assess the associations between rotation and translation and between rotation and tubercle, fossa, and cupping measurements., Results: Hips with severe SCFE had greater epiphyseal rotation than hips with mild SCFE (adjusted mean difference 21° [95% CI 11° to 31°]; p < 0.001) and hips with moderate SCFE (adjusted mean difference 13° [95% CI 3° to 23°]; p = 0.007). Epiphyseal rotation was positively correlated with posterior translation (r = 0.33 [95% CI 0.06 to 0.55]; p = 0.02) but not with inferior translation (r = 0.16 [95% CI -0.12 to 0.41]; p = 0.27). There was a positive correlation between rotation and metaphyseal fossa depth (r = 0.35 [95% CI 0.08 to 0.57]; p = 0.01), width (r = 0.41 [95% CI 0.15 to 0.61]; p = 0.003), and length (r = 0.56 [95% CI 0.38 to 0.75]; p < 0.001)., Conclusion: This study supports a rotational mechanism for the pathogenesis of SCFE. Increased rotation is associated with more severe slips, posterior epiphyseal translation, and enlargement of the metaphyseal fossa. The rotational nature of the deformity, with the center of rotation at the epiphyseal tubercle, should be considered when planning in situ fixation and realignment surgery. Avoiding placing a screw through the epiphyseal tubercle-the pivot point of rotation- may increase the stability of the epiphysis. The realignment of the epiphysis through rotation rather than simple translation is recommended during the open subcapital realignment procedure. Enlargement of the metaphyseal fossa disrupts the interlocking mechanism with the tubercle and increases epiphyseal instability. Even in the setting of a stable SCFE, an increased fossa enlargement may indicate using two screws instead of one screw, given the severity of epiphyseal rotation and the risk of instability. Further biomechanical studies should investigate the number and position of in situ fixation screws in relation to the epiphyseal tubercle and metaphyseal fossa., Level of Evidence: Level III, prognostic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request. Each author certifies that neither he nor she, nor any member of his or her immediate family, has funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article., (Copyright © 2020 by the Association of Bone and Joint Surgeons.)

Introduction: Prior studies have focused only on the temporal component of one-leg standing, no reports have examined the relationship between the qualitative components of one-leg standing and femoral BMD. Thus, this study investigated whether quality (i.e., movement control) of one-leg standing also associated femoral BMD., Materials and Methods: A total of 80 patients with unilateral hip fracture were included in a cross-sectional study. Basic and medical information and physical functions including movement control during one-leg standing were assessed at admission and 2 weeks after surgery, respectively. Hierarchical multiple regression analysis was performed to identify predictors of femoral BMDs on the non-fractured side. Dependent variables included femoral neck and total hip BMDs in models 1 and 2, respectively., Results: Hierarchical multiple regression analysis (standardized partial regression coefficients) in model 1 identified age (- 0.18), sex (0.38), body mass index (BMI) (0.41), movement control during one-leg standing on the non-fractured side (0.19), and life-space assessment (0.17) as factors associating femoral neck BMD. Meanwhile, hierarchical multiple regression analysis (standardized partial regression coefficients) in model 2 identified age (- 0.12), sex (0.36), BMI (0.37), and movement control during one-leg standing on the non-fractured side (0.25) as factors associating total hip BMD. The coefficients of determination adjusted for degrees of freedom (R 2 ) were 0.529 and 0.470 for models 1 and 2, respectively., Conclusion: Our results suggest that improving movement control during one-leg standing may be important for maintaining and improving femoral BMD on the non-fractured side.

Background: The epiphyseal tubercle, the corresponding metaphyseal fossa, and peripheral cupping are key stabilizers of the femoral head-neck junction. Abnormal development of these features in the setting of supraphysiologic physeal stress under high forces (for example, forces that occur during sports activity) may result in a cam morphology. Although most previous studies on cam-type femoroacetabular impingement (FAI) have mainly focused on overgrowth of the peripheral cupping, little is known about detailed morphologic changes of the epiphyseal and metaphyseal bony surfaces in patients with cam morphology., Questions/purposes: (1) Does the CT-based bony morphology of the peripheral epiphyseal cupping differ between patients with a cam-type morphology and asymptomatic controls (individuals who did not have hip pain)? (2) Does the CT-based bony morphology of the epiphyseal tubercle differ between patients with a cam-type morphology and asymptomatic controls? (3) Does the CT-based bony morphology of the metaphyseal fossa differ between patients with a cam-type morphology and asymptomatic controls?, Methods: After obtaining institutional review board approval for this study, we retrospectively searched our institutional database for patients aged 8 to 15 years with a diagnosis of an idiopathic cam morphology who underwent a preoperative CT evaluation of the affected hip between 2005 and 2018 (n = 152). We excluded 96 patients with unavailable CT scans and 40 patients with prior joint diseases other than cam-type FAI. Our search resulted in 16 patients, including nine males. Six of 16 patients had a diagnosis of bilateral FAI, for whom we randomly selected one side for the analysis. Three-dimensional (3-D) models of the proximal femur were generated to quantify the size of the peripheral cupping (peripheral growth of the epiphysis around the metaphysis), epiphyseal tubercle (a beak-like prominence in the posterosuperior aspect of the epiphysis), and metaphyseal fossa (a groove on the metaphyseal surface corresponding to the epiphyseal tubercle). A general linear model was used to compare the quantified anatomic features between the FAI cohort and 80 asymptomatic hips (aged 8 to 15 years; 50% male) after adjusting for age and sex. A secondary analysis using the Wilcoxon matched-pairs signed rank test was performed to assess side-to-side differences in quantified morphological features in 10 patients with unilateral FAI., Results: After adjusting for age and sex, we found that patients with FAI had larger peripheral cupping in the anterior, posterior, superior, and inferior regions than control patients who did not have hip symptoms or radiographic signs of FAI (by 1.3- to 1.7-fold; p < 0.01 for all comparisons). The epiphyseal tubercle height and length were smaller in patients with FAI than in controls (by 0.3- to 0.6-fold; p < 0.02 for all comparisons). There was no difference in tubercle width between the groups. Metaphyseal fossa depth, width, and length were larger in patients with FAI than in controls (by 1.8- to 2.3-fold; p < 0.001 for all comparisons). For patients with unilateral FAI, we saw similar peripheral cupping but smaller epiphyseal tubercle (height and length) along with larger metaphyseal fossa (depth) in the FAI side compared with the uninvolved contralateral side., Conclusion: Consistent with prior studies, we observed more peripheral cupping in patients with cam-type FAI than control patients without hip symptoms or radiographic signs of FAI. Interestingly, the epiphyseal tubercle height and length were smaller and the metaphyseal fossa was larger in hips with cam-type FAI, suggesting varying inner bone surface morphology of the growth plate. The docking mechanism between the epiphyseal tubercle and the metaphyseal fossa is important for epiphyseal stability, particularly at early ages when the peripheral cupping is not fully developed. An underdeveloped tubercle and a large fossa could be associated with a reduction in stability, while excessive peripheral cupping growth would be a factor related to improved physeal stability. This is further supported by observed side-to-side differences in tubercle and fossa morphology in patients with unilateral FAI. Further longitudinal studies would be worthwhile to study the causality and compensatory mechanisms related to epiphyseal and metaphyseal bony morphology in pathogenesis cam-type FAI. Such information will lay the foundation for developing imaging biomarkers to predict the risk of FAI or to monitor its progress, which are critical in clinical care planning., Level of Evidence: Level III, prognostic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request. Each author certifies that neither he nor she, nor any member of his or her immediate family, has funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article., (Copyright © 2020 by the Association of Bone and Joint Surgeons.)

Background: Although femoral retroversion has been linked to the onset of slipped capital femoral epiphysis (SCFE), and may result from a rotation of the femoral epiphysis around the epiphyseal tubercle leading to femoral retroversion, femoral version has rarely been described in patients with SCFE. Furthermore, the prevalence of actual femoral retroversion and the effect of different measurement methods on femoral version angles has yet to be studied in SCFE., Questions/purposes: (1) Do femoral version and the prevalence of femoral retroversion differ between hips with SCFE and the asymptomatic contralateral side? (2) How do the mean femoral version angles and the prevalence of femoral retroversion change depending on the measurement method used? (3) What is the interobserver reliability and intraobserver reproducibility of these measurement methods?, Methods: For this retrospective, controlled, single-center study, we reviewed our institutional database for patients who were treated for unilateral SCFE and who had undergone a pelvic CT scan. During the period in question, the general indication for obtaining a CT scan was to define the surgical strategy based on the assessment of deformity severity in patients with newly diagnosed SCFE or with previous in situ fixation. After applying prespecified inclusion and exclusion criteria, we included 79 patients. The mean age was 15 ± 4 years, 48% (38 of 79) of the patients were male, and 56% (44 of 79) were obese (defined as a BMI > 95th percentile (mean BMI 34 ± 9 kg/m2). One radiology resident (6 years of experience) measured femoral version of the entire study group using five different methods. Femoral neck version was measured as the orientation of the femoral neck. Further measurement methods included the femoral head's center and differed regarding the level of landmarks for the proximal femoral reference axis. From proximal to distal, this included the most-proximal methods (Lee et al. and Reikerås et al.) and most-distal methods (Tomczak et al. and Murphy et al.). Most proximally (Lee et al. method), we used the most cephalic junction of the greater trochanter as the landmark and, most distally, we used the center base of the femoral neck superior to the lesser trochanter (Murphy et al.). The orientation of the distal femoral condyles served as the distal reference axis for all five measurement methods. All five methods were compared side-by-side (involved versus uninvolved hip), and comparisons among all five methods were performed using paired t-tests. The prevalence of femoral retroversion (< 0°) was compared using a chi-square test. A subset of patients was measured twice by the first observer and by a second orthopaedic resident (2 years of experience) to assess intraobserver reproducibility and interobserver reliability; for this assessment, we used intraclass correlation coefficients., Results: The mean femoral neck version was lower in hips with SCFE than in the contralateral side (-2° ± 13° versus 7° ± 11°; p < 0.001). This yielded a mean side-by side difference of -8° ± 11° (95% CI -11° to -6°; p < 0.001) and a higher prevalence of femoral retroversion in hips with SCFE (58% [95% CI 47% to 69%]; p < 0.001) than on the contralateral side (29% [95% CI 19% to 39%]). These differences between hips with SCFE and the contralateral side were higher and ranged from -17° ± 11° (95% CI -20° to -15°; p < 0.001) based on the method of Tomczak et al. to -22° ± 13° (95% CI -25° to -19°; p < 0.001) according to the method of Murphy et al. The mean overall femoral version angles increased for hips with SCFE using more-distal landmarks compared with more-proximal landmarks. The prevalence of femoral retroversion was higher in hips with SCFE for the proximal methods of Lee et al. and Reikerås et al. (91% [95% CI 85% to 97%] and 84% [95% CI 76% to 92%], respectively) than for the distal measurement methods of Tomczak et al. and Murphy et al. (47% [95% CI 36% to 58%] and 60% [95% CI 49% to 71%], respectively [all p < 0.001]). We detected mean differences ranging from -19° to 4° (all p < 0.005) for 8 of 10 pairwise comparisons in hips with SCFE. Among these, the greatest differences were between the most-proximal methods and the more-distal methods, with a mean difference of -19° ± 7° (95% CI -21° to -18°; p < 0.001), comparing the methods of Lee et al. and Tomczak et al. In hips with SCFE, we found excellent agreement (intraclass correlation coefficient [ICC] > 0.80) for intraobserver reproducibility (reader 1, ICC 0.93 to 0.96) and interobserver reliability (ICC 0.95 to 0.98) for all five measurement methods. Analogously, we found excellent agreement (ICC > 0.80) for intraobserver reproducibility (reader 1, range 0.91 to 0.96) and interobserver reliability (range 0.89 to 0.98) for all five measurement methods in healthy contralateral hips., Conclusion: We showed that femoral neck version is asymmetrically decreased in unilateral SCFE, and that differences increase when including the femoral head's center. Thus, to assess the full extent of an SCFE deformity, femoral version measurements should consider the position of the displaced epiphysis. The prevalence of femoral retroversion was high in patients with SCFE and increased when using proximal anatomic landmarks. Since the range of femoral version angles was wide, femoral version cannot be predicted in a given hip and must be assessed individually. Based on these findings, we believe it is worthwhile to add evaluation of femoral version to the diagnostic workup of children with SCFE. Doing so may better inform surgeons as they contemplate when to use isolated offset correction or to perform an additional femoral osteotomy for SCFE correction based on the severity of the slip and the rotational deformity. To facilitate communication among physicians and for the design of future studies, we recommend consistently reporting the applied measurement technique., Level of Evidence: Level III, prognostic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2020 by the Association of Bone and Joint Surgeons.)

Background: Classifying hips with structural deformity on the spectrum from impingement to dysplasia is often subjective and frequently inexact. Currently used radiographic measures may inaccurately predict a hip's morphological stability in borderline hips. A recently described radiographic measure, the Femoro-Epiphyseal Acetabular Roof (FEAR) index, has demonstrated an ability to predict stability in the borderline hip. This measure is attractive to clinicians because procedures can be used on the basis of a hip's pathomechanics. This study was designed to further validate and characterize the FEAR index in a skeletally immature population, in hips with dysplasia/femoroacetabular impingement (FAI), and in asymptomatic hips., Questions/purposes: (1) What are the characteristics of the FEAR index in children and how does the index change with skeletal maturation? (2) How does the FEAR index correlate with clinical diagnosis and surgical treatment in a large cohort of symptomatic hips and asymptomatic controls? (3) How does the FEAR index correlate with clinical diagnosis in the borderline hip (lateral center-edge angle [LCEA] 20°-25°) group?, Methods: A total of 220 participants with symptomatic investigational hips with a clinical diagnosis of dysplasia or FAI between January 2008 and January 2018 were retrospectively collected from the senior author's practice. Investigational hips were excluded if they had any femoral head abnormalities preventing LCEA measurement (for example, Perthes disease), Tönnis osteoarthritis grade greater than 1, prior hip surgery, or prior femoral osteotomy. In the 220 participants, 395 hips met inclusion criteria. Once exclusion criteria were applied, 15 hips were excluded due to prior hip surgery or prior femoral osteotomy, and 12 hips were excluded due to femoral head deformity. A single hip was then randomly selected from each participant, resulting in 206 investigational hips with a mean age of 13 ± 3 years. Between January 2017 and December 2017, 70 asymptomatic control participants were retrospectively collected from the senior author's institutional trauma database. Control hips were included if the AP pelvis film had the coccyx centered over the pubic symphysis and within 1 to 3 cm of the superior aspect of the symphysis. Control hips were excluded if there was any fracture to the pelvis or ipsilateral femur or the participant had prior hip/pelvis surgery. After exclusion criteria were applied, 16 hips were excluded due to fracture. One hip was then randomly selected from each participant, resulting in 65 control hips with a mean age of 16 ± 8 years. Standardized standing AP pelvis radiographs were used to measure the FEAR index, LCEA, and Tönnis angle in the investigational cohort. Standardized false-profile radiographs were used to measure the anterior center-edge angle (ACEA) in the investigational cohort. Two blinded investigators measured the FEAR index with an intraclass correlation coefficient of 0.92 [95% CI 0.84 to 0.96]. Question 1 was answered by comparing the above radiographic measures in age subgroups (childhood: younger than 10 years; adolescence: 10 to 14 years old; maturity: older than 14 years) of dysplastic, FAI, and control hips. Question 2 was answered by comparing the radiographic measures in all dysplastic, FAI, control hips, and a subgroup of operatively or nonoperatively managed dysplasia and FAI hips. Question 3 was answered by comparing the radiographic measures in borderline (LCEA 20°-25°) dysplastic, FAI, and control hips., Results: The FEAR index was lower in older dysplastic of hips (younger than 10 years, 6° ± 9°; 10 to 14 years, 4° ± 10°; older than 14 years, 5° ± 9°; p < 0.001) and control hips (younger than 10 years, -6° ± 5°; 10 to 14 years, -15° ± 4°; older than 14 years, -16° ± 7°; p < 0.001). The diagnosis and age groups were independently correlated with the FEAR index (p < 0.001). The relationship between the FEAR index and diagnosis remained consistent in each age group (p = 0.11). The FEAR index was higher in all dysplastic hips (mean 5° ± 10°) than in asymptomatic controls (mean -13° ± 7°; p < 0.001) and FAI hips (mean -10° ± 11°; p < 0.001). Using -1.3° as a cutoff for FAI/control hips and dysplastic hips, 81% (112 of 139) of hips with values below this threshold were FAI/control, and 89% (117 of 132) of hips with values above -1.3° were dysplastic. The receiver operator characteristics area under the curve (ROC-AUC) was 0.91. Similarly, the FEAR index was higher in borderline dysplastic hips than in both asymptomatic borderline controls (p < 0.001) and borderline FAI hips (p < 0.001). Eighty-nine percent (33 of 37) of hips with values below this threshold were FAI/control, and 90% (37 of 41) of hips with values above -1.3° were dysplastic. The ROC-AUC for borderline hips was 0.86., Conclusion: The FEAR index was associated with the diagnosis of hip dysplasia and FAI in a patient cohort with a wide age range and with varying degrees of acetabular deformity. Specifically, a FEAR index greater than -1.3° is associated with a dysplastic hip and a FEAR index less than -1.3° is associated with a hip displaying FAI. Using this reliable, developmentally based radiographic measure may help hip preservation surgeons establish a correct diagnosis and more appropriately guide treatment., Level of Evidence Level: III, diagnostic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2020 by the Association of Bone and Joint Surgeons.)