Search

Energy transfer was explored in a series of poly(phenylene ethynylene) (PPE) polymers with increasing lengths that were end-capped with thiophene-benzothiadiazole (TBT) groups to form fully conjuga...

A hybrid semiconductor-mediator-catalyst photoelectrochemical (PEC) cell mimicking the PSII is proposed for efficient water oxidation. Addition of carbazole mediator results in a significant enhancement in PEC water oxidation performance as it promotes interfacial hole transfer from the Fe2O3 light absorber to the Ru(carbene) catalyst, a function similar to the tyrosine residue in photosystem II. Such a semiconductor-mediator-catalyst assembly greatly inspires the rational design of high-performance artificial photosynthesis systems.

A kinetic framework for the ultrafast photophysics of tris(2,2-bipyridine)ruthenium(II) phosphonated and methyl-phosphonated derivatives is used as a basis for modeling charge injection by ruthenium dyes into a semiconductor substrate. By including the effects of light scattering, dye diffusion and adsorption kinetics during sample preparation, and the optical response of oxidized dyes, quantitative agreement with multiple transient absorption datasets is achieved on timescales spanning femtoseconds to nanoseconds. In particular, quantitative agreement with important spectroscopic handles, decay of an excited state absorption signal component associated with charge injection in the UV region of the spectrum and the dynamical redshift of an approximately 500 nm isosbestic point, validates our kinetic model. Pseudo-first-order rate coefficients for charge injection are estimated in this work, with an order of magnitude ranging 1011 s-1 to 1012 s-1. The model makes the minimalist assumption that all excited states of a particular dye have the same charge injection coefficient, an assumption that would benefit from additional theoretical and experimental exploration. We have adapted this kinetic model to predict charge injection under continuous solar irradiation, and find that as many as 68 electron transfer events per dye per second take place, significantly more than prior estimates in the literature., Comment: 81 pp - main paper and supplementary material. 34 figures

The excited-state dynamics in individual Ge nanowires (NWs) are imaged using ultrafast pump–probe microscopy with high spatial (∼600 nm) and temporal (∼500 fs) resolution. Photoexcitation of the NW...

We investigate the mechanism of energy transfer between ruthenium(II) (Ru) and osmium(II) (Os) polypyridyl complexes affixed to a polyfluorene backbone (PF-RuOs) using a combination of time-resolved emission spectroscopy and coarse-grained molecular dynamics (CG MD). Photoexcitation of a Ru chromophore initiates Dexter-style energy hopping along isoenergetic complexes followed by sensitization of a lower-energy Os trap. While we can determine the total energy transfer rate within an ensemble of solvated PF-RuOs from time-dependent Os* emission spectra, heterogeneity of the system and inherent polymer flexibility give rise to highly multiexponential kinetics. We developed a three-part computational kinetic model to supplement our spectroscopic results: (1) CG MD model of PF-RuOs that simulates molecular motions out to 700 ns, (2) energy transfer kinetic simulations in CG MD PF-RuOs that produce time-resolved Ru and Os excited-state populations, and (3) computational experiments that interrogate the mechanisms by which motion aids energy transfer. Good agreement between simulated and experimental emission transients reveals that our kinetic model accurately simulates the molecular motion of PF-RuOs during energy transfer. Simulated results indicate that pendant flexibility allows 81% of the excited state to sensitize an Os trap compared to a 48% occupation when we treat pendants statically. Our computational experiments show how static pendants are only able to engage in local energy transfer. The excited state equilibrates across a domain of complexes proximal to the initial excitation and becomes trapped within that unique, frozen locality. Side-chain flexibility enables pendants to swing in and out of the original domain spreading the excited state out to ±30 pendant complexes away from the initial excitation.

Maximizing the efficiency of solar energy conversion using dye assemblies rests on understanding where the energy goes following absorption. Transient spectroscopies in solution are useful for this purpose, and the time-resolved data are usually analyzed with a sum of exponentials. This treatment assumes that dynamic events are well separated in time, and that the resulting exponential prefactors and phenomenological lifetimes are related directly to primary physical values. Such assumptions break down for coincident absorption, emission, and excited state relaxation that occur in transient absorption and photoluminescence of tris(2,2'-bipyridine)ruthenium(2+) derivatives, confounding the physical meaning of the reported lifetimes. In this work, we use inductive modeling and stochastic chemical kinetics to develop a detailed description of the primary ultrafast photophysics in transient spectroscopies of a series of Ru dyes, as an alternative to sums of exponential analysis. Commonly invoked three-level schemes involving absorption, intersystem crossing (ISC), and slow nonradiative relaxation and incoherent emission to the ground state cannot reproduce the experimentally measured spectra. The kinetics simulations reveal that ultrafast decay from the singlet excited state manifold to the ground state competes with ISC to the triplet excited state, whose efficiency was determined to be less than unity. The populations predicted by the simulations are used to estimate the magnitudes of transition dipoles for excited state excitations and evaluate the influence of specific ligands. The mechanistic framework and methodology presented here are entirely general, applicable to other dye classes, and can be extended to include charge injection by molecules bound to semiconductor surfaces.

Interface dynamics of nanocrystalline NiO thin films sensitized with two ruthenium polypyridyl chromophores have been investigated to examine the influence that excited-state dipole orientation and the position of the bipyridine radical formed in the charge-separated state have on interfacial electron transfer yields. In ultrafast transient absorption experiments, the charge separated state is observed on the nanosecond timescale for the trifluoromethyl-substituted chromophore, [Ru(flpy)2(dcb)]2+ (flpy = 4,4′-bis(trifluoromethyl)-2,2′-bipyridine, dcb = 4,4′-dicarboxy-2,2′-bipyridine), but not for [Ru(bpy)2(dcb)]2+ (bpy = 2,2′-bipyridine). Differences are attributed to the positioning of the bipyridine radical formed in the charge separated state; for [Ru(flpy)2(dcb)]2+, the electron is localized on the flpy ligand distal to the surface, whereas for [Ru(bpy)2(dcb)]2+, the electron is localized on the dcb ligand, proximal to the NiO surface. Enhanced photovoltaic performance is observed for dye-sensitized solar cell devices prepared with [Ru(flpy)2(dcb)]2+, demonstrating that enhanced charge separation can be correlated with device efficiency.

The photophysics of a series of thiophene oligomers (Tn) with and without naphthalene diimide (NDI) acceptor end groups were investigated using femtosecond transient absorption spectroscopy. Photoexcited thiophene oligomers (n = 4, 6, 8, 10, and 12) exhibit complex length-dependent excited-state dynamics on the picosecond time scale due to rapid structural relaxation and intersystem crossing. The incorporation of NDI end groups leads to ultrafast charge separation after selective excitation of the thiophene donor. Initial location of photoexcitation dictates the time scale of charge separation and, therefore, recombination. Photoexcitations near the NDI acceptor result in fast charge separation in all Tn-NDI2 oligomers, whereas excitations near the center of the oligomer must undergo a length-dependent long-range electron-transfer or energy-transfer/electron-transfer step to create a charge-separated state. Oligomer structure plays a role in the charge separation and recombination processes, where T4-NDI2...

Interfacial dynamics following photoexcitation of the water oxidation assembly [((PO3H2)2bpy)2RuII(bpy-bimpy)RuII(tpy)(OH2)]4+, −[RuaII–RubII–OH2]4+, on nanocrystalline TiO2 electrodes, starting from either −[RuaII–RubII–OH2]4+ or −[RuaII–RubIII–OH2]5+, have been investigated. Transient absorption measurements for TiO2–[RuaII–RubII–OH2]4+ in 0.1 M HPF6 or neat trifluoroethanol reveal that electron injection occurs with high efficiency but that hole transfer to the catalyst, which occurs on the electrochemical time scale, is inhibited by local environmental effects. Back electron transfer occurs to the oxidized chromophore on the microsecond time scale. Photoexcitation of the once-oxidized assembly, TiO2–[RuaII–RubIII–OH2]5+, in a variety of media, generates −[RuaIII–RubIII–OH2]6+. The injected electron randomly migrates through the surface oxide structure reducing an unreacted −[RuaII–RubIII–OH2]5+ assembly to −[RuaII–RubII–OH2]4+. In a parallel reaction, −[RuaIII–RubIII–OH2]6+ formed by electron injectio...

Visible-light-driven water splitting was investigated in a dye sensitized photoelectrosynthesis cell (DSPEC) based on a photoanode with a phosphonic acid-derivatized donor−π–acceptor (D−π–A) organic chromophore, 1, and the water oxidation catalyst [Ru(bda)(4-O(CH2)3P(O3H2)2-pyr)2], 2, (pyr = pyridine; bda = 2,2′-bipyridine-6,6′-dicarboxylate). The photoanode was prepared by using a layering strategy beginning with the organic dye anchored to an FTO|core/shell electrode, atomic layer deposition (ALD) of a thin layer (

A series of organometallic complexes and polymers has been synthesized with an objective of studying their fundamental photophysical properties together with their organic photovoltaic and organic field-effect transistor properties. The metal chromophores consist of a diketopyrrolopyrrole (DPP) core, end functionalized with cyclometalated platinum “auxochrome”. The photophysical properties of the metal complex and polymers are compared with the unmetalated chromophore DPP-C8-Th-Py. The polymers Poly-DPP-Th-Pt and Poly-DPP-Ph-Pt differ structurally in their cyclometallating ligands, where they consist of 2-thienylpyridine and 2-phenylpyridine, respectively. Efficient solar spectrum coverage was observed for all chromophores; specifically, the polymer Poly-DPP-Th-Pt has an onset of absorption at ∼900 nm with an optical band gap of 1.4 eV. The triplet excited state was detected for all chromophores and probed by both nanosecond and picosecond transient absorption spectroscopy. Both polymers were employed as ...

We have previously reported that substantially higher optical gain values can be achieved in the conjugated polymer poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene vinylene] (MEH-PPV) through use of transient excitation conditions. In the present paper, we report on a systematic investigation of this behavior to elucidate the physical mechanisms involved, which enables us to distinguish between the fundamental intrinsic gain and an excitation induced degraded gain. Using pump laser pulses having temporal widths longer and shorter than the photoluminescence (PL) decay time of MEH-PPV, both quasi-steady-state (QSS) and transient excitation regimes are explored in our encapsulated waveguide heterostructures [Si(1 0 0)/SiO2/MEH-PPV/poly(methyl methacrylate)]. Under transient excitation (25 ps pump pulses), extremely large optical gain is observed, reaching a value of 700 cm−1 at a maximum pump energy density of 85 µJ/cm2. However, under QSS conditions (8 ns pulses), considerably lower gain coefficients are achieved with a maximum of ∼130 cm−1 at an energy density of 2,000 µJ/cm2; this factor of 5 decrease in optical gain performance is observed at the same excitation density as that for transient excitation using ps pulses. We have also employed unencapsulated waveguide structures [Si(1 0 0)/SiO2/MEH-PPV/air], which allows us to achieve additional insight on gain degradation under QSS conditions. It is clear that the gain measured under transient conditions is more representative of the intrinsic gain whereas that determined in the QSS regime is degraded by defect-mediated dissociation of emissive states due to localized thermal and oxidative damage to the films. It is in the QSS regime in which most optical gain measurements to date have been performed. These results suggest that further optimization of MEH-PPV – and most likely other conjugated polymers – as a robust optical gain medium can be achieved by consideration of the excitation pulse width.

The performance of dye-sensitized solar cells (DSSC) and dye-sensitized photoelectrosynthesis cells (DSPEC)—and their constituent chromophores, catalysts, and substrates—is commonly evaluated by photocurrents, product fluxes, and time-resolved spectroscopies. Kinetic models of solar harvesting systems are often built from the data using phenomenological methods (i.e. sum-of-exponential or global fit analyses). Such models cannot be predictive, and therefore offer limited fundamental insights to the efficiencies of charge injection and photocatalysis. We describe an approach to modeling the molecular photophysics, interfacial electron transfer, and charge separation that yields a comprehensive kinetic framework for these processes. Simulations of femtosecond to steady-state dynamics using this framework provide a detailed picture of dye cycling under both pulsed-monochromatic and continuous broadband illumination at 1 sun intensity. The competition between molecular transitions and charge injection will be discussed, including the potential implications for the design of chromophore-catalyst assemblies.

The femtosecond transient absorption spectra (fsTA) and excited state kinetics for a series of six structurally related mixed-metal polypyridyl supramolecules are reported. Each complex consists of one or two light absorbers (LA) with Ru(II) or Os(II) centers attached to a Rh(III)-centered electron collector (EC) by an aromatic bridging ligand (BL). The resulting bimetallic and trimetallic complexes have LA-BL-EC and LA-BL-EC-BL-LA architectures, respectively. Excitation at 470 nm light populates metal-to-bridging ligand charge transfer states (MLCT), showing a transient absorption band near 380 nm due to π → π∗ transitions of a bridging ligand-localized radical anion and a transient bleach around 525 nm resulting from formal oxidation of the LA metal in the excited state. Loss of the ligand localized radical signal during the first 10 ps reflects conversion of the excited state population from an MLCT state into metal-to-metal (i.e. M(dπ)-to-Rh(dσ∗)) charge transfer states (MMCT). Each complex shares a similar ultrafast component, indicating that the kinetics governing MLCT → MMCT population transfer do not depend on the nature of the LA. Return to the ground state, however, is strongly LA dependent and controlled by the free-energy difference between the MMCT state and ground state, as well as an associated large reorganization energy.

Interfacial dynamics are investigated in SnO2/TiO2 core/shell films derivatized with a Ru(II)-polypyridyl chromophore ([RuII(bpy)2(4,4′-(PO3H2)2bpy)]2+, RuP) using transient absorption methods. Electron injection from the chromophore into the TiO2 shell occurs within a few picoseconds after photoexcitation. Loss of the oxidized dye through recombination occurs across time scales spanning 10 orders of magnitude. The majority (60%) of charge recombination events occur shortly after injection (τ = 220 ps), while a small fraction (≤20%) of the oxidized chromophores persists for milliseconds. The lifetime of long-lived charge-separated states (CSS) depends exponentially on shell thickness, suggesting that the injected electrons reside in the SnO2 core and must tunnel through the TiO2 shell to recombine with oxidized dyes. While the core/shell architecture extends the lifetime in a small fraction of the CSS, making water oxidation possible, the subnanosecond recombination process has profound implications for t...

Significance Concerted proton-coupled electron transfer (EPT) reactions in which both electrons and protons transfer in tandem are at the heart of many chemical and biological conversions including photosystem II. We report here the direct observation of absorption bands arising from photoEPT transitions, in this case, in H-bonded complexes between N -methyl-4,4′-bipyridinium cation and biologically relevant donors including tyrosine. The importance of these observations follows from the earlier experimental observations by Taube and coworkers on intervalence transfer in mixed-valence complexes. The observation of these photoEPT transitions and the appearance of reactive radical products also points to a possible, if inefficient, role in DNA photodamage and, possibly, in the formation of reactive oxygen intermediates.

Layer-by-Layer (LbL) polyelectrolyte self-assembly occurs by the alternate exposure of a substrate to solutions of oppositely charged polyelectrolytes or polyions. Here, we report the application of LbL to construct chromophore–catalyst assemblies consisting of a cationic polystyrene-based Ru polychromophore (PS-Ru) and a [Ru(tpy)(2-pyridyl-N-methylbenzimidazole) (OH2)]2+ water oxidation catalyst (RuC), codeposited with poly(acrylic acid) (PAA) as an inert polyanion. These assemblies are deposited onto planar indium tin oxide (ITO, Sn:In2O3) substrates for electrochemical characterization and onto mesoporous substrates consisting of a SnO2/TiO2 core/shell structure atop fluorine doped tin oxide (FTO) for application to light-driven water oxidation in a dye-sensitized photoelectrosynthesis cell. Cyclic voltammetry and ultraviolet–visible absorption spectroscopy reveal that multilayer deposition progressively increases the film thickness on ITO glass substrates. Under an applied bias, photocurrent measureme...

The ligand 5-PO3H2-2,2':5',2″-terthiophene-5-trpy, T3 (trpy = 2,2':6',2″-terpyridine), was prepared and studied in aqueous solutions along with its metal complex assembly [Ru(T3)(bpy)(OH2)](2+) (T3-Ru-OH2, bpy = 2,2'-bipyridine). T3 contains a phosphonic acid group for anchoring to a TiO2 photoanode under aqueous conditions, a terthiophene fragment for light absorption and electron injection into TiO2, and a terminal trpy ligand for the construction of assemblies comprising a molecular oxidation catalyst. At a TiO2 photoanode, T3 displays efficient injection at pH 4.35 as evidenced by the high photocurrents (∼350 uA/cm(2)) arising from hydroquinone oxidation. Addition of [Ru(bpy)(OTf)][OTf]2 (bpy = 2,2'-bipyridine, OTf(-) = triflate) to T3 at the free trpy ligand forms the molecular assembly, T3-Ru-OH2, with the oxidative catalyst fragment: [Ru(trpy)(bpy)(OH2)](2+). The new assembly, T3-Ru-OH2, was used to perform efficient light-driven oxidation of phenol (230 μA/cm(2)) and benzyl alcohol (25 μA/cm(2)) in a dye-sensitized photoelectrosynthesis cell.

Interfacial electron transfer at titanium dioxide (TiO2) is investigated for a series of surface bound ruthenium-polypyridyl dyes whose metal-to-ligand charge-transfer state (MLCT) energetics are tuned through chemical modification. The 12 complexes are of the form Ru(II)(bpy-A)(L)2(2+), where bpy-A is a bipyridine ligand functionalized with phosphonate groups for surface attachment to TiO2. Functionalization of ancillary bipyridine ligands (L) enables the potential of the excited state Ru(III/)* couple, E(+/)*, in 0.1 M perchloric acid (HClO4(aq)) to be tuned from -0.69 to -1.03 V vs NHE. Each dye is excited by a 200 fs pulse of light in the visible region of the spectrum and probed with a time-delayed supercontiuum pulse (350-800 nm). Decay of the MLCT excited-state absorption at 376 nm is observed without loss of the ground-state bleach, which is a clear signature of electron injection and formation of the oxidized dye. The dye-dependent decays are biphasic with time constants in the 3-30 and 30-500 ps range. The slower injection rate constant for each dye is exponentially distributed relative to E(+/)*. The correlation between the exponentially diminishing density of TiO2 sub-band acceptor levels and injection rate is well described using Marcus-Gerischer theory, with the slower decay components being assigned to injection from the thermally equilibrated state and the faster components corresponding to injection from higher energy states within the (3)MLCT manifold. These results and detailed analyses incorporating molecular photophysics and semiconductor density of states measurements indicate that the multiexponential behavior that is often observed in interfacial injection studies is not due to sample heterogeneity. Rather, this work shows that the kinetic heterogeneity results from competition between excited-state relaxation and injection as the photoexcited dye relaxes through the (3)MLCT manifold to the thermally equilibrated state, underscoring the potential for a simple kinetic model to reproduce the complex kinetic behavior often observed at the interface of mesoporous metal oxide materials.

A ruthenium polypyridyl chromophore with electronically isolated triarylamine substituents has been synthesized that models the role of tyrosine in the electron transport chain in photosystem II. When bound to the surface of a TiO2 electrode, electron injection from a Ru(II) Metal-to-Ligand Charge Transfer (MLCT) excited state occurs from the complex to the electrode to give Ru(III). Subsequent rapid electron transfer from the pendant triarylamine to Ru(III) occurs with an observed rate constant of ∼1010 s-1, which is limited by the rate of electron injection into the semiconductor. Transfer of the oxidative equivalent away from the semiconductor surface results in dramatically reduced rates of back electron transfer, and a long-lived (τ = ∼165 μs) triarylamine radical cation that has been used to oxidize hydroquinone to quinone in solution.

An isoindigo based π-conjugated oligomer and polymer that contain cyclometalated platinum(II) "auxochrome" units were subjected to photophysical characterization, and application of the polymer in bulk heterojunction polymer solar cells with PCBM acceptor was examined. The objective of the study was to explore the effect of the heavy metal centers on the excited state properties, in particular, intersystem crossing to a triplet (exciton) state, and further how this would influence the performance of the organometallic polymer in solar cells. The materials were characterized by electrochemistry, ground state absorption, emission, and picosecond-nanosecond transient absorption spectroscopy. Electrochemical measurements indicate that the cyclometalated units have a significant impact on the HOMO energy level of the chromophores, but little effect on the LUMO, which is consistent with localization of the LUMO on the isoindigo acceptor unit. Picosecond-nanosecond transient absorption spectroscopy reveals a transient with ∼100 ns lifetime that is assigned to a triplet excited state that is produced by intersystem crossing from a singlet state on a time scale of ∼130 ps. This is the first time that a triplet state has been observed for isoindigo π-conjugated chromophores. The performance of the polymer in bulk heterojunction solar cells was explored with PC61BM as an acceptor. The performance of the cells was optimum at a relatively high PCBM loading (1:6, polymer:PCBM), but the overall efficiency was relatively low with power conversion efficiency (PCE) of 0.22%. Atomic force microscopy of blend films reveals that the length scale of the phase separation decreases with increasing PCBM content, suggesting a reason for the increase in PCE with acceptor loading. Energetic considerations show that the triplet state in the polymer is too low in energy to undergo charge separation with PCBM. Further, due to the relatively low LUMO energy of the polymer, charge transfer from the singlet to PCBM is only weakly exothermic, which is believed to be the reason that the photocurrent efficiency is relatively low.

Surface-bound, perylenediimide (PDI)-based molecular assemblies have been synthesized on nanocrystalline TiO2 by reaction of a dianhydride with a surface-bound aniline and succinimide bonding. In a second step, the Fe(II) polypyridyl complex [Fe(II)(tpy-PhNH2)2](2+) was added to the outside of the film, also by succinimide bonding. Ultrafast transient absorption measurements in 0.1 M HClO4 reveal that electron injection into TiO2 by (1)PDI* does not occur, but rather leads to the ultrafast formation of the redox-separated pair PDI(•+),PDI(•-), which decays with complex kinetics (τ1 = 0.8 ps, τ2 = 15 ps, and τ3 = 1500 ps). With the added Fe(II) polypyridyl complex, rapid (25 ps) oxidation of Fe(II) by the PDI(•+),PDI(•-) redox pair occurs to give Fe(III),PDI(•-) persisting for400 μs in the film environment.

Applications Dennis L. Ashford,† Melissa K. Gish,† Aaron K. Vannucci,‡ M. Kyle Brennaman,† Joseph L. Templeton,† John M. Papanikolas,† and Thomas J. Meyer*,† †Department of Chemistry, University of North Carolina at Chapel Hill, CB 3290, Chapel Hill, North Carolina 27599, United States ‡Department of Chemistry and Biochemistry, University of South Carolina, Columbia, South Carolina 29208, United States

Excited state dynamics at the nanoscale provide important insight into the influence of structural features such as interfaces, defects, and surfaces on material properties. Pump–probe microscopy combines the spatial resolution of far-field optical microscopy with the temporal resolution of ultrafast spectroscopy, and has emerged as a powerful technique for characterizing spatial variation in dynamical phenomena across nanometer length scales. It has helped correlate dynamical phenomena with specific structural features in a variety of materials, shedding light on how excited state behaviors can dramatically differ from one member of the ensemble to the next, and even at different points within a single structure. It has also enabled direct imaging of transport phenomena such as free carrier diffusion, exciton migration and plasmon propagation in nanostructures. This ability to observe individual objects provides unique insight into complex materials where heterogeneous behavior makes it difficult, if not impossible, to reach clear and quantitative conclusions.

A series of polystyrene-based light harvesting polymers featuring pendant polypyridyl ruthenium complexes has been synthesized. The polymer backbones were prepared by nitroxide-mediated radical polymerization with a variable average molecular weight (Mn) ranging from ∼5500 to ∼24 000 g mol−1. Pendant Ru(II) polypyridyl complexes were grafted to the polymer backbone by azide–alkyne click chemistry to afford chromophore loaded polymers. The resulting polystyrene-based polychromophores with pendant Ru(II) polypyridyl complexes (PS-Ru) were characterized by nuclear magnetic resonance and infrared spectroscopy, confirming the high efficiency of the click grafting. The photophysical and electrochemical properties of the series of PS-Ru polymers were characterized in solution and investigated as a function of polymer chain length and solvent. The electrochemical properties of PS-Ru maintained the characteristics of the individual Ru(II) polypyridyl units. Emission quantum yield and lifetime studies reveal that the metal-to-ligand charge transfer (MLCT) excited states are quenched to a variable extent depending on the molecular weight of the polymers, consistent with intramolecular energy transfer and self-quenching in polymers with longer chain lengths. To support the synthetic effort, molecular dynamics simulations of the polypyridyl ruthenium derivatized polystyrenes in different solvents were conducted.

A series of linear thiophene oligomers containing 4, 6, 8, 10, and 12 thienylene units were synthesized and end-capped with naphthalene diimide (NDI) acceptors with the objective to study the effect of oligomer length on the dynamics of photoinduced electron transfer and charge recombination. The synthetic work afforded a series of nonacceptor-substituted thiophene oligomers, Tn, and corresponding NDI end-capped series, TnNDI2 (where n is the number of thienylene repeat units). This paper reports a complete photophysical characterization study of the Tn and TnNDI2 series by using steady-state absorption, fluorescence, singlet oxygen sensitized emission, two-photon absorption, and nanosecond–microsecond transient absorption spectroscopy. The thermodynamics of photoinduced electron transfer and charge recombination in the TnNDI2 oligomers were determined by analysis of photophysical and electrochemical data. Excitation of the Tn oligomers gives rise to efficient fluorescence and intersystem crossing to a tr...

Lead halide perovskites (LHPs) have shown remarkable promise for use in photovoltaics, photodetectors, light-emitting diodes, and lasers. Although solution-processed polycrystalline films are the most widely studied morphology, LHP nanowires (NWs) grown by vapor-phase processes offer the potential for precise control over crystallinity, phase, composition, and morphology. Here, we report the first demonstration of self-catalyzed vapor–liquid–solid (VLS) growth of lead halide (PbX2; X = Cl, Br, or I) NWs and conversion to LHP. We present a kinetic model of the PbX2 NW growth process in which a liquid Pb catalyst is supersaturated with halogen X through vapor-phase incorporation of both Pb and X, inducing growth of a NW. For PbI2, we show that the NWs are single-crystalline, oriented in the ⟨1210⟩ direction, and composed of a stoichiometric PbI2 shaft with a spherical Pb tip. Low-temperature vapor-phase intercalation of methylammonium iodide converts the NWs to methylammonium lead iodide (MAPbI3) perovski...

Surface trap density in silicon nanowires (NWs) plays a key role in the performance of many semiconductor NW-based devices. We use pump-probe microscopy to characterize the surface recombination dynamics on a point-by-point basis in 301 silicon NWs grown using the vapor-liquid-solid (VLS) method. The surface recombination velocity (S), a metric of the surface quality that is directly proportional to trap density, is determined by the relationship S = d/4τ from measurements of the recombination lifetime (τ) and NW diameter (d) at distinct spatial locations in individual NWs. We find that S varies by as much as 2 orders of magnitude between NWs grown at the same time but varies only by a factor of 2 or three within an individual NW. Although we find that, as expected, smaller-diameter NWs exhibit shorter τ, we also find that smaller wires exhibit higher values of S; this indicates that τ is shorter both because of the geometrical effect of smaller d and because of a poorer quality surface. These results highlight the need to consider interwire heterogeneity as well as diameter-dependent surface effects when fabricating NW-based devices.

The hole-injection and recombination photophysics for NiO sensitized with RuP ([RuII(bpy)2(4,4′-(PO3H2)2-bpy)]2+) are explored. Ultrafast transient absorption (TA) measurements performed with an external electrochemical bias reveal the efficiency for productive hole-injection, that is, quenching of the dye excited state that results in a detectable charge-separated electron–hole pair, is linearly dependent on the electronic occupation of intragap states in the NiO film. Population of these states via a negative applied potential increases the efficiency from 0% to 100%. The results indicate the primary loss mechanism for dye-sensitized NiO is rapid nongeminate recombination enabled by the presence of latent holes in the surface of the NiO film. Our findings suggest a new design paradigm for NiO photocathodes and devices centered on the avoidance of this recombination pathway.

Interfacial dynamics are investigated in SnO

The dye-sensitized photoelectrosynthesis cell (DSPEC) integrates high bandgap, nanoparticle oxide semiconductors with the light-absorbing and catalytic properties of designed chromophore–catalyst assemblies. The goals are photoelectrochemical water splitting into hydrogen and oxygen and reduction of CO2 by water to give oxygen and carbon-based fuels. Solar-driven water oxidation occurs at a photoanode and water or CO2 reduction at a cathode or photocathode initiated by molecular-level light absorption. Light absorption is followed by electron or hole injection, catalyst activation, and catalytic water oxidation or water/CO2 reduction. The DSPEC is of recent origin but significant progress has been made. It has the potential to play an important role in our energy future.

Photoinduced charge transfer is a key step in the mechanism of charge generation in organic solar cells. Charge transfer typically occurs from a photoexcited conjugated polymer donor to an electron acceptor. In an effort to better understand the primary events in solar cells, we have investigated photoinduced charge transfer in model donor-acceptor systems consisting of pi-conjugated oligomer donors that are covalently linked to diimide electron acceptors. These studies utilized oligo(thiophene), oligo(phenylene ethynylene) and oligo(fluorene) pi-conjugated systems with lengths varying from 4 to 12 repeat units linked to naphthalene diimide electron acceptors. Excitation with 100 femtosecond pulses at wavelengths correspoinding to the conjugated oligomer absorption band(s) leads to rapid photoinduced charge transfer to produce a charge separated state, (oligomer+)-(NDI-), which subsequently decays on timescales ranging from 100 ps to 5 ns. The dynamics of the forward and reverse electron transfer reactions depend strongly on the structure and length of the pi-conjugated oligomers, with the fastest rates occurring for oligo(thiophene)s, and considerably slower rates for oligo(phenylene ethynylene)s. The talk will discuss the structure-property relationships and energetic correlations that control the dynamics of charge separation and recombination.

The dye-sensitized photoelectrosynthesis cell (DSPEC) integrates high bandgap, nanoparticle oxide semiconductors with the light-absorbing and catalytic properties of designed chromophore–catalyst assemblies. The goals are photoelectrochemical water splitting into hydrogen and oxygen and reduction of CO2 by water to give oxygen and carbon-based fuels. Solar-driven water oxidation occurs at a photoanode and water or CO2 reduction at a cathode or photocathode initiated by molecular-level light absorption. Light absorption is followed by electron or hole injection, catalyst activation, and catalytic water oxidation or water/CO2 reduction. The DSPEC is of recent origin but significant progress has been made. It has the potential to play an important role in our energy future.

Ultrafast energy and electron transfer (EnT and ET, respectively) are characterized in a light-harvesting assembly based on a π-conjugated polymer (poly(fluorene)) functionalized with broadly absorbing pendant organic isoindigo (iI) chromophores using a combination of femtosecond transient absorption spectroscopy and large-scale computer simulation. Photoexcitation of the π-conjugated polymer leads to near-unity quenching of the excitation through a combination of EnT and ET to the iI pendants. The excited pendants formed by EnT rapidly relax within 30 ps, whereas recombination of the charge-separated state formed following ET occurs within 1200 ps. A computer model of the excited-state processes is developed by combining all-atom molecular dynamics simulations, which provides a molecular-level view of the assembly structure, with a kinetic model that accounts for the multiple excited-state quenching pathways. Direct comparison of the simulations with experimental data reveals that the underlying structure has a dramatic effect on the partitioning between EnT and ET in the polymer assembly, where the distance and orientation of the pendants in relation to the backbone serve to direct the dominant quenching pathway.

Sensitized SrTiO3 films were evaluated as potential photoanodes for dye-sensitized photoelectrosynthesis cells (DSPECs). The SrTiO3 films were grown via pulsed laser deposition (PLD) on a transparent conducting oxide (fluorine-doped tin oxide, FTO) substrate, annealed, and then loaded with zinc(II) 5,10,15-tris(mesityl)-20-[(dihydroxyphosphoryl)phenyl] porphyrin (MPZnP). When paired with a platinum wire counter electrode and an Ag/AgCl reference electrode these sensitized films exhibited photocurrent densities on the order of 350 nA/cm(2) under 0 V applied bias conditions versus a normal hydrogen electrode (NHE) and 75 mW/cm(2) illumination at a wavelength of 445 nm. The conditions of the post-deposition annealing step-namely, a high-temperature reducing atmosphere-proved to be the most important growth parameters for increasing photocurrent in these electrodes.

A polychromophoric light-harvesting assembly featuring a polystyrene (PS) backbone with ionic carboxylate-functionalized Ru(II) polypyridyl complexes as pendant groups (PS-Ru-A) was synthesized and successfully anchored onto mesoporous structured TiO2 films (TiO2 //PS-Ru-A). Studies of the resulting TiO2 //PS-Ru-A films carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) confirmed that the ionic carboxylated Ru(II) complexes from PS-Ru-A led to the surface immobilization on the TiO2 film. Monochromatic light photocurrent spectroscopy (IPCE) and white light (AM1.5G) current-voltage studies of dye-sensitized solar cells using the TiO2 //PS-Ru-A photoanode give rise to modest photocurrent and white light efficiency (24 % peak IPCE and 0.33 % PCE, respectively). The photostability of surface-bound TiO2 //PS-Ru-A films was tested and compared to a monomeric Ru(II) complex (TiO2 //Ru-A), showing an enhancement of ∼14 % in the photostability of PS-Ru-A. Transient absorption measurements reveal that electron injection from surface-bound pendants occurs on the picosecond time scale, similar to TiO2 //Ru-A, while time-resolved emission measurements reveal delayed electron injection occurring in TiO2 //PS-Ru-A on the nanosecond time scale, underscoring energy transport from unbound to surface-bound complexes. Additionally, charge recombination is delayed in PS-Ru-A, pointing towards intra-assembly hole transport to complexes away from the surface. Molecular dynamics simulations of PS-Ru-A in fluid solution indicate that a majority of the pendant Ru(II) complexes lie within 10-20 A of each other, facilitating efficient energy- and charge transport among the pendant complexes.

Thermal management is an important consideration for most nanoelectronic devices, and an understanding of the thermal conductivity of individual device components is critical for the design of thermally efficient systems. However, it can be difficult to directly probe local changes in thermal conductivity within a nanoscale system. Here, we utilize the time-resolved and diffraction-limited imaging capabilities of ultrafast pump-probe microscopy to determine, in a contact-free configuration, the local thermal conductivity in individual Si nanowires (NWs). By suspending single NWs across microfabricated trenches in a quartz substrate, the properties of the same NW both on and off the substrate are directly compared. We find the substrate has no effect on the recombination lifetime or diffusion length of photogenerated charge carriers; however, it significantly impacts the thermal relaxation properties of the NW. In substrate-supported regions, thermal energy deposited into the lattice by the ultrafast laser pulse dissipates within ∼10 ns through thermal diffusion and coupling to the substrate. In suspended regions, the thermal energy persists for over 100 ns, and we directly image the time-resolved spatial motion of the thermal signal. Quantitative analysis of the transient images permits direct determination of the NW's local thermal conductivity, which we find to be a factor of ∼4 smaller than in bulk Si. Our results point to the strong potential of pump-probe microscopy to be used as an all-optical method to quantify the effects of localized environment and morphology on the thermal transport characteristics of individual nanostructured components.

Degenerately doped In2O3:Sn semiconductor nanoparticles (nanoITO) have been used to study the photoinduced interfacial electron-transfer reactivity of surface-bound [Ru(II)(bpy)2(4,4'-(PO3H2)2-bpy)](2+) (RuP(2+)) molecules as a function of driving force over a range of 1.8 eV. The metallic properties of the ITO nanoparticles, present within an interconnected mesoporous film, allowed for the driving force to be tuned by controlling their Fermi level with an external bias while their optical transparency allowed for transient absorption spectroscopy to be used to monitor electron-transfer kinetics. Photoinduced electron transfer from excited-state -RuP(2+*) molecules to nanoITO was found to be dependent on applied bias and competitive with nonradiative energy transfer to nanoITO. Back electron transfer from nanoITO to oxidized -RuP(3+) was also dependent on the applied bias but without complication from inter- or intraparticle electron diffusion in the oxide nanoparticles. Analysis of the electron injection kinetics as a function of driving force using Marcus-Gerischer theory resulted in an experimental estimate of the reorganization energy for the excited-state -RuP(3+/2+*) redox couple of λ* = 0.83 eV and an electronic coupling matrix element, arising from electronic wave function overlap between the donor orbital in the molecule and the acceptor orbital(s) in the nanoITO electrode, of Hab = 20-45 cm(-1). Similar analysis of the back electron-transfer kinetics yielded λ = 0.56 eV for the ground-state -RuP(3+/2+) redox couple and Hab = 2-4 cm(-1). The use of these wide band gap, degenerately doped materials provides a unique experimental approach for investigating single-site electron transfer at the surface of oxide nanoparticles.

The use of sunlight to make chemical fuels (i.e., solar fuels) is an attractive approach in the quest to develop sustainable energy sources. Using nature as a guide, assemblies for artificial photosynthesis will need to perform multiple functions. They will need to be able to harvest light across a broad region of the solar spectrum, transport excited-state energy to charge-separation sites, and then transport and store redox equivalents for use in the catalytic reactions that produce chemical fuels. This multifunctional behavior will require the assimilation of multiple components into a single macromolecular system. A wide variety of different architectures including porphyrin arrays, peptides, dendrimers, and polymers have been explored, with each design posing unique challenges. Polymer assemblies are attractive due to their relative ease of production and facile synthetic modification. However, their disordered nature gives rise to stochastic dynamics not present in more ordered assemblies. The rational design of assemblies requires a detailed understanding of the energy and electron transfer events that follow light absorption, which can occur on time scales ranging from femtoseconds to hundreds of microseconds, necessitating the use of sophisticated techniques. We have used a combination of time-resolved absorption and emission spectroscopies with observation times that span 9 orders of magnitude to follow the excited-state evolution within polymer-based molecular assemblies. We complement experimental observations with molecular dynamics simulations to develop a microscopic view of these dynamics. This Account provides an overview of our work on polymers decorated with pendant Ru(II) chromophores, both in solution and on surfaces. We have examined site-to-site energy transport among the Ru(II) complexes, and in systems incorporating π-conjugated polymers, we have observed ultrafast formation of a long-lived charge-separated state. When attached to TiO2, these assemblies exhibit multifunctional behavior in which photon absorption is followed by energy transport to the surface and electron injection to produce an oxidized metal complex. The oxidizing equivalent is then transferred to the conjugated polymer, giving rise to a long-lived charge-separated state.

Spatially resolved pump-probe microscopy is used to image carrier transport in individual nanowires. Diffusion of charge carriers in Si nanowires and charge separation in a nanowire encoded with an axial p-i-n junction will be discussed.