Search

Sea purslane (Sesuvium portulacastrum) was cultivated for two 90-day sequences at two spacings, and with various soil amendments, to evaluate its potential to arrest the increase in soil salinity and sodicity associated with irrigation using paper- and pulp-mill effluent. Its phytodesalination capacity (PDC) with respect to Na ranged from 162 to 226 kg/ha in the first sequence and 167 to 250 kg/ha in the second sequence; the PDC is reliable even under drought stress. Addition of amendments, in particular pressmud compost, increased the average Na+ uptake by 38%, leading to the highest PDC of 250 kg/ha for a single crop sequence. [ABSTRACT FROM AUTHOR]

Conference proceedings are valuable sources for research, providing insights into individual or organisational projects. Australian library and information services (LIS) professionals have the opportunity to contribute to a robust conference culture, including the biennial library technology VALA conference. Practice-driven conferences can offer interpretations of LIS practitioner experiences, however, there is limited research focusing on Australian LIS conference proceedings. The VALA conference papers offer a unique record of technology's impact, influence, and implementation in Australian LIS organisations over the last forty years. This article will outline the objective and methodology of an ongoing research project undertaking historical analysis of VALA conference papers. The research project seeks to examine key themes, theories, and tools discussed in VALA conference papers and will attempt to identify if evolving technology influences the practices and attitudes of Australian LIS practitioners. The article will identify the research methods and the content analysis techniques that will be used in the project, and present preliminary results from a pilot study presented at the 2023 RAILS conference. [ABSTRACT FROM AUTHOR]

This study evaluates the impact of sales promotions that are featured in store flyers distributed by prominent retailers and their capacity to attract consumers to their establishments. A distinctive conceptual framework is introduced that scrutinizes the influence of ethically-minded consumer behavior, digital citizenship/literacy, and a retailer's orientation toward environmental sustainability and explicit ecological concerns. A quasi-experimental design was used to formulate four distinct scenarios from a possible set of eight, stemming from the combinations of three variables: 2 Retailer Positioning (green vs. without explicit ecological claims) × 2 Flyer Mediums (paper vs. digital) × 2 Discount Levels (5% discount vs. 30% discount). Through an online survey, a sample of 269 responses was garnered to gauge consumer reactions to these store flyers, evaluating their attitudes and receptiveness. The findings suggest that attitudes toward paper flyers were more favorable when presented by non-green retailers compared to their green counterparts. This can be attributed to a perceived inconsistency between a green brand positioning and the use of paper flyers. Furthermore, the propensity to transition to digital flyers was notably stronger for green retailers compared to non-green retailers, but this inclination was most pronounced when higher discounts were offered. [ABSTRACT FROM AUTHOR]

For many centuries, paper is the main material for recording cultural achievements all over the world. Infrared (IR) spectroscopy is an essential analytical tool for the structural analysis of paper and pulp chemistry. This review article introduced recent technical and scientific reports in terms of IR spectroscopy in the paper science and application, where interest had increased during the last couple decades (2000–2022). Five parts were described according to the application of IR spectroscopy: the analysis of cellulose and its derivatives, estimation the date of documents, identification the origins of fiber or paper, specification the chemical and physical properties of paper, and characterization the new materials of paper. [ABSTRACT FROM AUTHOR]

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Ink-paper historical documents, which are an important part of cultural heritage, can be damaged by various materials on the outside and the inside of the paper. Cotton fiber sheets treated with iron gall ink and then treated with stabilization materials were studied. Nanosized Mg(OH)2 was used as a deacidification material and potassium bromide, tetrabutylammonium bromide, or propyl gallate as antioxidant materials were investigated as a stabilization system for iron gall ink-damaged paper. All samples were artificially aged in the air for 150 h at 65 °C in a UV/moisture chamber or 500 h at 90 °C. The pH and alkaline reserve (AR) measurements, monitoring of color change, and scanning electron microscopy analysis data confirm that the aging effect is more destructive to the iron gall inked paper. The experiment results show that using alkaline materials with antioxidants, such as nano-Mg(OH)2 and propyl gallate, positively affects color changes of ink-damaged paper. Treatment with a stabilization system such as nanosized Mg(OH)2, a binder hydroxypropyl cellulose (Klucel), and an antioxidant as propyl gallate is a suitable method for iron gall ink damaged paper stabilization and preservation, according to the study results. [ABSTRACT FROM AUTHOR]

The pulp and paper industry stands out as an example of a technology based on a renewable resource, cellulose. The sludge, however, poses major environmental and public health problems. To effectively manage the sludge wastes, it is critical to fully evaluate its composition, possible environmental impacts, and the total amount of exploitable renewable resources. The study established the pH of the sludge to be 7.32 ± 0.98, an electrical conductivity (1.84 mS/cm), nitrogen concentration (2.65 ± 0.21%), and total organic matter (41.23 ± 3.11%). The cellulosic content was established to be 74.07 ± 2.71% which contributes to 53.07 ± 1.23% water holding capacity (WHC). The most abundant elements were C and O, followed by Cl, Si, Al, and Mg, with lower concentrations of S, Si, K, and iron. The polycyclic aromatic compounds (PAHs) levels ranged from 0.29 to 322.56 ng.g-1 with 1-methyl pyrene posting the highest concentration (322.56 ng.g-1. XRD peaks at 17.10°, 23.86°, 30.14°, and 36.57°, which imply the existence of CaCO3. SEM indicated that the sludge was majorly comprised of fibers materials with average particle sizes of 280 micrometers. TGA/DTG analysis showed that the sludge had the greatest cellulose and hemicellulose (64.7 wt. %). [ABSTRACT FROM AUTHOR]

The pulp and paper industry has significant sustainability implications and necessarily requires a careful consideration of direct and lower-tier suppliers for effective sustainable supply chain management. This paper utilized an extensive literature review and semi-structured interviews of experts in the Chinese pulp and paper industry to unearth the factors that highly influence multi-tier supply chain sustainability. A Technological-Organizational-Environmental (TOE) and Human-Organizational-Technological (HOT-fit) based theoretical framework was employed to classify the identified factors. Then, an Analytical Hierarchy Process (AHP) based methodology was applied to determine the relative importance of the factors. A comparison analysis of the relative importance of the factors as determined by the experts in the focal companies, Tier-1 suppliers and Tier-2 suppliers of the Chinese pulp and paper industry is presented. The results show that institutional and technological factors are most critical to actualizing multi-tier supply chain sustainability. Thus, the study outcomes present relevant theoretical and practical implications for the managers and practitioners in the pulp and paper industry on how to facilitate multi-tier supply chain sustainability for increased competitiveness. Furthermore, this study provides guidelines for other industries as well and sets the stage for subsequent theorization and exploration of multi-tier supply chain sustainability for expected performance gains. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

Production planning and scheduling in the pulp and paper industry can be very challenging. In most cases, practitioners address the production planning process manually, which is time-consuming and sub-optimal. This study deals with production planning encountered in a pulp mill company involving different wood species, parallel heterogeneous lines, inventory limits, sequence-independent setup times and preventive maintenance. To tackle the problem, an efficient mixed-integer formulation is proposed that optimizes when, where and how much to produce of different wood species and schedules preventive maintenance to minimize the total setup times. Several computational experiments are conducted to solve a case study in a pulp mill company in Chile. The results show the capability of the model to support the decision-making process in the pulp and paper industry, providing an efficient tool for practitioners to solve the problem in a reasonable amount of time. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

This article introduces a flexible and easy-to-implement open-ended scientific inquiry activity called the Paper Towels Challenge. After experimentally determining which of three unbranded paper towels is the most absorbent, students discuss their results and methods. The teacher facilitates the discussion of epistemological issues. This activity can be used regardless of the participants' age or country to promote science understanding, NGSS science and engineering practices, and twenty-first century skills, such as critical thinking and communication. The many uses, benefits, and possible adaptations of the activity are discussed. [ABSTRACT FROM AUTHOR]

Iron-impregnated filter paper (Fe-Pi) was evaluated as phosphorus (P) extractant in four soils of Ogun state, southwest Nigeria in a screenhouse experiment. The experiments lasted for 8 weeks. Soil P contents were extracted at 0, 4, and 8 weeks after the incorporation of amendments (cattle manure, poultry manure, and wood ash) using Fe-Pi, Bray-1, Bray-2, Mehlich-1, Hunter, and Olsen extractant. Agronomic variables were taken fortnightly from grown maize plants and later harvested at 8 weeks, residual effects of the treatments were also evaluated. Maize dry matter weight (DMW) and P uptake were also measured. Results indicated that a linear relationship existed among the extractants with significant coefficient at p ≤.001. Fe-Pi established a strong relationship with the conventional extractants in the following order: Bray-1 (R2 = 0.99) > Bray-2 (R2 = 0.98) > Hunter (R2 = 0.96) > Mehlich-1 (R2 = 0.86) > Olsen (R2 = 0.82). Fe-Pi had a significant relationship with P uptake and DMW. Phosphorus uptakes under the animal manure amendments were statistically higher than uptake in control and woodash amended soils. Therefore, the study concluded that Fe-Pi was a good predictor of plant available P and had significant relationship with Bray-1, thus it could be considered for the estimation of soil available P in soils of southwest Nigeria. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the Institute of Conservation is the property of Routledge and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Lead pollution may cause serious damage to environment safety and human health, especially to children's growth. In this work, by using double stranded DNA (dsDNA) as the recognition element, a simple and effective electrochemical DNA sensor has been developed on a full carbon-based substrate, reduced graphene oxide/carbon paper (rGO/CP), to accomplish the rapid, sensitive and selective determination of Pb2+. Carbon paper (CP) provides a suitable substrate for the sensor with high portability and low cost, while rGO is easily electrodeposited onto CP and serves as both the signal amplification element and the molecular bridge between DNA and CP. Because of its high specific surface area and unique conjugated giant π structure, rGO tightly binds with DNA through π-π stacking and hydrophobic interactions, thereby providing loading of high quantities of DNA. The specific coordination between DNA and Pb2+ further improves the sensitivity of the sensor. The results demonstrate that rapid electrochemical enrichment of Pb2+ is achieved using the constructed CP/rGO/DNA electrode with a linear relationship between the peak current and the concentration of Pb2+ from 1 pM to 100 pM and a detection limit of 1 pM. In addition, this approach shows good selectivity and satisfactory repeatability for river water analysis. A promising sensitive, low-cost, simply-fabricated, and portable full carbon-based electrochemical biosensing platform has been therefore provided for lead determination. [ABSTRACT FROM AUTHOR]

Xuan paper is one of the most famous handmade papers in China and is an important paper for conservation. However, the evenness of Xuan paper has not yet received much attention. In this study, the distribution of the in-plane grammage and mechanical properties of Xuan paper are measured. It is found that the distribution of the in-plane grammage and mechanical properties of Xuan paper is uneven. In the handmade direction, the grammage and mechanical properties of Xuan paper are overall largest in the lower area, followed by the upper and middle areas. The sheet forming process of Xuan paper has an important effect on the distribution of in-plane grammage, mechanical properties, and fiber orientation of Xuan paper. The folded state has a negative effect on the mechanical properties of the folded area of Xuan paper. This study will help raise awareness of the unevenness in physical properties of Xuan paper, which is important in both conservation and research applications. [ABSTRACT FROM AUTHOR]

In her 'Manifesto to Decentre Theatre and Performance Studies' (2021), Swati Arora explores the intangible and invisible borders that function to exclude certain people and knowledges, usually indexed by race, gender, class, and geography, from the academy. As a new working group convenor, I'm interested in thinking through what hidden borders might operate through the Call for Paper and panel selection process. What are prospective panellists really being asked to demonstrate? What unofficial knowledges are privileged and who has access to these? How can we reorient this process towards questioning and away from demonstration of knowledge? In this short provocation I reflect my own experience of selecting abstracts and ask what work might be done to develop a more transparent and empowering model of panel curation. This is a short provocation that was prepared for the roundtable discussion on 'Decolonisation and Solidarity' as part of the conference, Borderlines IX: Seeking Solidarity and Wonder Through Performance, which took place at De Montfort University in Leicester, UK, on 30 June and 1 July 2022. [ABSTRACT FROM AUTHOR]

Michael Hillard's Shredding Paper: The Rise and Fall of Maine's Mighty Paper Industry is both a labor history of the paper industry and a political economy of corporate governance and class struggle in the United States. As a labor historian, Hillard has compiled thousands of hours of interviews with paper-industry workers and managers. As a political economist, he persuasively argues that contests over the distribution of surplus from the 1960s forward and shifts in paper-industry ownership led to the strike wave that began in the '60s and spread to every paper mill in Maine by the late 1980s. Rapacious practices by out-of-state owners challenged workers' moral compass as much as their material existence. Responding, paper workers developed a folk political economy and even a folk Marxism, creating the foundation for challenging working-class support for regressive economics. This review provides context for Hillard's claim while partially challenging it in a different context, the United States steel industry. [ABSTRACT FROM AUTHOR]

The chemical oxygen demand (COD) emissions from the pulp and paper industry in China have declined continuously since the tighter COD discharge standards were implemented in 2008. Using firm-level data from 2003 to 2013, we investigate how China's pulp and paper firms would respond to the tighter COD discharge standards with a difference-in-differences design. We find that the tighter COD discharge standards have significant causal effects to induce the pulp and paper firms to reduce their COD emissions primarily through adopting cleaner production. However, the effectiveness of the tighter COD discharge standards depends on monitoring and enforcement activities as well as other regulations accompanying with the tighter COD discharge standards, all of which have become strengthened since China's 11th Five-Year-Plan (FYP, 2006–2010). While strengthened environmental regulations since the 11th FYP are from the top leadership of the Chinese government in order to deal with the increasing environmental degradation, the underlying driving force of the strengthened environmental regulations is from the household demand for better environmental quality as income increases. This study enriches literature not only on firms' responses to environmental regulations in developing countries but also on environmental regulations and technology adoption as well as environmental enforcement and compliance. [ABSTRACT FROM AUTHOR]

The history of subjects is often told analysing notions of knowledge in historical reforms, policies, curricula, and textbooks. In this article, we analyse student papers from 1968, focusing on their responses to the topic 'Social distinctions and prejudices in Denmark'. The students present a number of concepts and categories of social differences and prejudices, depict a contemporary problem, refer to theoretical or categorical frameworks, provide a historical account, state bold claims and/or present conceptual definitions. Then, by giving different examples from their everyday life and by establishing some form of line or structure in their writings, they form an argument or narrative. They do this by using—we assume—information from their textbooks, from what have been discussed in teaching, in the public debate, and in the students' homes. The student papers not only passively reflect but are part of the ongoing constitution of the subjects and subject matter, during a period of tremendous educational change. [ABSTRACT FROM AUTHOR]

In the current strategy, a highly sensitive and fast one-step colorimetric assay for trace determination of Cu2+ in water is presented. The planned assay was based upon the use of varnish polish-modified filter paper printed with 2-[5-(2-hydroxy-5-sulfophenyl)-3-phenyl-1-formazyl] benzoic acid monosodium salt, commercially named zincon. Under optimal conditions, the designed assay readily recognised the formation of blue–purple-coloured Cu–ZI chelate in less than 10 min. The proposed probe was able to detect Cu2+ in the concentration range from 0.04 to 10 μg/mL (6.34 × 10−1 to 1.59 × 103µM), with low limit of detection (LOD) of 0.01 μg/mL (1.59 × 10−1 µM). The LOD was 10-fold lower than the allowable level for Cu2+ in drinking water set by WHO legislation. The assay was applied for Cu2+determination in water with acceptable recoveries (89.6–102.1%) and precision (<3%). Therefore, the proposed sensing assay might be considered as a potential rapid and low-cost candidate for total determination and speciation of Cu2+in water samples. [ABSTRACT FROM AUTHOR]

The book "ChatGPT and healthcare: Unlocking the potential of patient empowerment" by Harvey Castro MD, MBA explores the application of ChatGPT, an AI language model developed by OpenAI, in the healthcare industry. The book discusses the benefits of ChatGPT for patients, such as generating concise summaries of medical histories and providing professional abstracts of research papers. It also highlights the importance of cautious utilization of ChatGPT due to potential risks and limitations, including non-intuitive responses and sensitivity to data alterations. The author emphasizes the need for enhanced medical and healthcare literacy to maximize the utility of ChatGPT. The book also addresses legal and ethical issues surrounding ChatGPT usage in healthcare, including privacy concerns and the need for clinical validation. Overall, the book presents ChatGPT as a tool that has the potential to transform healthcare services and improve patient experiences, but also acknowledges the challenges and limitations associated with its use. [Extracted from the article]

Gas chromatography – tandem mass spectrometry (GC-MS/MS) using formic acid as a protective agent is reported for the determination of acrylic resin monomers in food contact packaging paper. The analytes were extracted by ethanol mixed with formic acid with 2-phenylethyl propionate as the internal standard. The extract was separated by a 6% cyanopropylbenzene-94% dimethylsiloxane ultra-inert chromatographic column and analyzed by GC-MS/MS in multiple reaction monitoring (MRM) mode. 13 acrylic resin monomers including acrylic acid, styrene, and acrylic ester were separated. The procedure was successfully applied for the analysis of real samples. The procedure provided a linear calibration range with detection limits from 0.16 to 0.46 mg kg−1. The mean recoveries were from 88.1% to 100.9% with relative standard deviations less than 5.4%. The residual acrylic resin monomers in packaging paper were primarily from printing base paper and varnish. Of the acrylic resin monomers, the monomers except for butyl acrylate and 2-ethylhexyl acrylate showed low migration rates. The method provides high sensitivity and good reproducibility with simple pretreatment, demonstrating application for monitoring acrylic resin monomers in food contact packaging paper. [ABSTRACT FROM AUTHOR]

The effect of bamboo virgin pulp addition to the recycled pulp in enhancing the recycled paper's mechanical properties was evaluated. Malaysian bamboo virgin pulp used in this research were Bambusa vulgaris (Aur bamboo), Gigantochloa levis (Beting bamboo), and Gigantochloa scortechinii (Semantan bamboo). The addition of 2.5, 5, 7.5, and 10 wt% of bamboo virgin pulp improved the burst index, folding endurance, tearing index, and tensile index of the recycled paper from 2.27 to 3.17 kPa.m2/g, 7 to 15 double folds, 5.98 to 8.27 mN.m2/g, and 24.86 to 32.40 Nm/g, respectively. These were equivalent to the increment percentage for burst index, folding endurance, tearing index, and tensile index at the range of 6.61 to 39.65%, 28.57 to 114.29%, 15.72 to 38.59%, and 10.50 to 33.87%, respectively. The application of bamboo virgin pulp is very promising in improving the recycled paper's mechanical properties and this could be further extended in enhancing the other properties such as physical and optical paper properties. [ABSTRACT FROM AUTHOR]

The present article provides a comprehensive analysis of the aging phenomenon of transformer insulation and the corresponding changes in insulation performance that occur over time. The present manuscript outlines diverse insulating materials that are employed in transformers, the fundamental aging mechanism of the insulation, the function of space charges in the aging of the insulation, and various simulation methodologies utilized for diagnosing the insulation status of the transformer. The primary focus of this paper is to examine the various numerical techniques employed in modeling and analyzing the aging characteristics of transformer insulation. The mechanisms underlying the accumulation of charge and distortion of electric fields in insulation are explained through the utilization of numerical modeling techniques. This paper focuses on understanding the mechanism of insulation aging, thereby facilitating the optimization and maintenance of insulation performance throughout its operational lifespan. [ABSTRACT FROM AUTHOR]

The present investigation sought to assess the practicality of utilizing a combined pre-treatment approach comprising electrocoagulation, peroxide, and hypochlorite treatments for the removal of chemical oxygen demand (COD) and tannin/lignin from paper mill wastewater. The study aimed to optimize the operating parameters with a view to maximizing the removal efficiencies while minimizing energy consumption. A pair of iron electrodes were used as anode and cathode in the study, and the main operating parameters were determined as initial pH, applied current, treatment time and oxidant dosage/COD ratio. Response surface methodology (RSM) was used to evaluate the effect of these parameters on COD and tannin/lignin removals. The primary findings of the investigation indicated that the integration of electrocoagulation with peroxide and hypochlorite treatments exhibited efficacy in removing COD, tannin/lignin, colour, phenol, and turbidity from paper mill wastewater. The optimized conditions resulted in COD removal efficiencies of 48.13 ± 2.2% and 29.53 ± 1.4% for EC with H2O2 and Ca(OCl)2, respectively. Tannin/lignin removal efficiencies were 92.59 ± 3.6% and 94.09 ± 1.8% for EC-H2O2 and EC-Ca(OCl)2, respectively. The specific energy consumption (SEC) values showed that EC-Ca(OCl)2 required 7 times more energy than EC-H2O2 for removing 1 kg COD. The principal deduction drawn from the study was that EC-H2O2 pre-treatment demonstrated superior COD removal efficiency and lower energy consumption, while EC-Ca(OCl)2 pre-treatment exhibited greater efficiency in removing toxic and recalcitrant pollutants. In future studies, it would be useful to conduct research to increase COD removal efficiency in addition to tannin/lignin removal in EC-Ca(OCl)2 process. [ABSTRACT FROM AUTHOR]

Starch is one of the oldest adhesives, and has been utilised for a variety of applications, including as a consolidant for artworks and archives, after cooking. Although widely available, cost-effective, and versatile it has limitations such as large particle size, which makes it challenging for the adhesive to penetrate deeply into objects. Attempts to increase the concentration of starch adhesives for enhanced strength often lead to increased viscosity, hindering penetration and causing an undesirable film on the surface. Achieving a workable consistency often leads to reduced adhesive power. An approach to using nanosized starch as a binder for paper and cellulose-based objects is presented. Starch nanoparticles (SNPs) from wheat, rice, maize and waxy maize were successfully synthesised using a ‘top-down’ approach that is facile as well as energy efficient. Size distribution measurements indicate most particles to be less than 50 nm, smaller than the pore size of most historic papers. SNPs could make a better sizing adhesive than traditionally-made starch paste, and they are also a green alternative to a variety of chemically formulated, organic solvent-based adhesives. The compatibility, non-toxicity, and biodegradability of starch remained uncompromised during the modification. [ABSTRACT FROM AUTHOR]

Cellulose filter paper (CFP) was modified with poly(acrylic acid) (PAA) and/or poly(ethylene glycol)methacrylate (PEGMA), followed by Cu immobilization for 4-nitrophenol (4NP) reduction. Among these samples, Cu-immobilized CFP modified with PEGMA polymer (CFP@PEGMA-Cu) exhibited the highest Cu incorporation of 2.21%. Those having the copolymer (CFP@PAA-co-PEGMA-Cu) demonstrated the highest efficiency, completing 4NP reduction in 3 min with an impressive 99.45% conversion, a high-rate constant (k) of 27.5 × 10−3 s−1, and turnover frequency (TOF) of 18.36 h−1. Notably, the catalysts containing PAA maintained good reusability, preserving 97% conversion upon 9 cycles. These results suggest their promising applications in sustainable catalysis, offering the catalytic potential with simple preparation and low cost required. [ABSTRACT FROM AUTHOR]

Washi is paper made by hand from the bark of native Japanese shrubs. Washi is a common medium used for printmaking and paper crafts. Artists who have studied nagashi-zuki, a sheet-forming method unique to washi, often import Japanese fibers because alternatives with similar properties have not been identified. We propose Dirca L. (leatherwood), a shrub endemic to North America, as a source of fibers with properties similar to those plants traditionally used to make washi. The thinness and strength of the leatherwood paper allows it to withstand repeated bending, folding and creasing better than paper made from species of Wikstroemia (Japanese fiber), suggesting an alternative for use with various printmaking techniques and paper arts and crafts that involve folding, such as origami. We engaged printmakers and origami artists in creating original pieces using our leatherwood paper and evaluated how the paper responds to various printmaking techniques and complex folding. We identified Dirca mexicana as a source of fibers with similar properties to species of Wikstroemia used to make gampi washi. Handmade D. mexicana bark paper was successfully used as a paper medium for intaglio, lithography, relief, digital, and screenprinting printmaking techniques, as well as, complex folding origami sculptures. [ABSTRACT FROM AUTHOR]

This article engages with discard studies scholarship to interrogate findings from a study that set out to deliberately follow wastepaper in an early childhood setting. The study, which used participatory methods positioning teachers and children as research partners, began with purposeful noticing and attunement to paper's movements and materiality. This attentiveness defamiliarized paper and the ways in which it is known and experienced. It led to questions about the wider systems in which paper is entangled. In this article, thinking with discard studies provokes us to consider the relational systems that involve paper in early learning settings and leads us to question the reduce-reuse-recycle maxim which allows some systems to flourish by diverting attention away from them. The article concludes by suggesting that if we are to discard well, we must become aware of systems that are maintained by taken-for-granted waste practices such as reducing, reusing, and recycling. [ABSTRACT FROM AUTHOR]

The International Paper Conservation Seminar has now been held as four face-to-face events and four online events. It is a three-day international event delivered in Spanish and Portugese with keynote talks from national and international conservation professionals from Mexico to Chile presenting projects covering works on paper in diverse formats including documents, photographs historic books, and artworks. Countries such as Argentina, Chile, Bolivia, Peru, Ecuador, Mexico, Paraguay, Uruguay, Colombia, Brazil, Spain and Costa Rica have sent delegates to discuss both the social and cultural aspects of conservation work. The seminar is a completely free event for its attendees. It is intended to be suitable for all, with high-level talks addressing issues of management, preservation, conservation, restoration and disaster recovery among many others. From the third event onwards, training workshops for basic treatments have been developed, with the participation of recognized conservation professionals from universities and international institutes, allowing the number of attendees to remain constant since the Covid-19 pandemic. It creates networks and fosters collaboration for professional and institutional projects. The seminars have generated a connected and active community of paper conservators in the region, aware of our limitations, and capable of solving problems collaboratively and according to local resources. [ABSTRACT FROM AUTHOR]

Nano-ZnO has the characteristics of photocatalytic performance and excellent transparency and conductivity. Because of its many excellent properties, it also occupies a very important position in the types of semiconductor materials. Nano-ZnO film preparation technology has been researched and developed and applied in many fields, but there are few applied researches on the protection of paper artworks. The main content of this article is the study of the application and enhancement effect of nano-ZnO film preparation technology on the protection of paper cultural relics. In this paper, the sol-gel process is selected in the common film preparation process, and the configured sol is dipped and lifted. By comparing the paper covered with nano ZnO film and the paper not covered with nano ZnO film in the anti-aging performance test, anti-ultraviolet aging performance test, aging appearance change and the experimental results of the mechanical performance test of the application effect of different papers, the results are investigated. The application and enhancement effect of nano-ZnO film preparation technology in the protection of paper art works. Experimental studies have shown that under the same aging time, the mechanical properties of rice paper covered with nano-Zno film are higher than those of blank rice paper without nano-Zno film. The transverse tensile strength of the paper is increased by 5.88 m/N, an increase of 98%. The vertical tensile strength increased by 3.93 m/N, an increase of about 87%, the vertical folding resistance increased by 16 times, the horizontal folding resistance increased by 15 times, and the vertical tearing strength increased by 4.15 m/N, an increase of about 125%, and the transverse tearing degree is enhanced by 2.21 m/N, which is about 64%. The two kinds of rice paper were subjected to warm-heat aging, and the final results showed that the mechanical properties of the two kinds of rice papers showed a decreasing trend, but the mechanical properties of the rice paper covered by the nano-Zno film decreased at a slower rate, and the final mechanical properties were also lower than that of untreated rice paper. Blank rice paper covered with film is better. The experimental results of ultraviolet light on paper aging show that the nano-Zno film covering the paper will delay the paper aging, and the appearance of the nano-Zno film after ultraviolet light does not change significantly. Under the mechanical performance test of nano Zno film on different types of paper application, the tensile strength, folding resistance and tearing degree of the three papers participating in the experiment have been improved, which shows that the nano Zno film has the advantage of strengthening paper. [ABSTRACT FROM AUTHOR]

"Last Paper Standing: A Century of Competition Between the Denver Post and the Rocky Mountain News" by Ken J. Ward explores the rivalry between the two newspapers and the decline of multiple newspaper cities. The book highlights the intense competition between the Denver Post and the Rocky Mountain News, which lasted for over a century. It also delves into the personalities involved and the innovative ways the newspapers differentiated themselves to benefit readers. The author suggests that both newspapers could have coexisted, preserving the high standard of journalism, but ultimately only one newspaper survived. The book emphasizes the importance of preserving good newspapers and the loss that occurs when they fold. [Extracted from the article]

The present study investigated the phycoremediation efficacy of two freshwater green microalgae Chlorella ellipsoidea and Desmodesmus opoliensis for treatment of water of Ellenga beel, a wetland located in the vicinity of Nagaon paper mill and into which effluents of the paper mill are drained-off. After inoculation of water samples with the two freshwater green microalgae, the culture medium were analyzed for various physicochemical parameters such as pH, electrical conductivity, total dissolved solids, phosphate, nitrate, potassium, chloride, phenol, cyanide, biological oxygen demand, chemical oxygen demand and heavy metals at every seven days interval for a period of 42 days. A reduction of phosphate (85%), sulfate (96%), nitrate (76%) and chloride (48%) was observed after 42 days of incubation in the tested beel water. The micro algal incubation also resulted in decrease of heavy metal such as Pb (54%), Zn (98%), Cr (59%), and Cu (61%). Comparison of Fourier transform infrared spectra of beel water samples (control) with those inoculated with the test micro algal species showed presence of binding sites for certain functional groups like phosphate, amide, carbohydrate and alkyl halides in inoculated samples. D. opoliensis exhibited higher phycoremediation efficiency than C. ellipsoidea in removal of pollutants from the beel water samples. [ABSTRACT FROM AUTHOR]

Scientific papers and patents are reliable sources of knowledge carriers for measuring science and technology advances, predicting technological trends, and formulating technology strategies. Although the idea of entirely using the two knowledge carriers is rapidly emerging in academic discussion, a theoretical framing of the comparisons is still not present in literature. This study conducts bibliometrics on 2986 patent families and 4755 scientific papers related to silicon carbide metal–oxide-semiconductor field-effect transistor (SiC-MOSFET) to identify its technological trends and compare the similarities and differences in knowledge generation and diffusion in science and technology. Our methodological framework consists of a combination of geographic distribution (identifying the research developments and distribution), cooperation networks (analyzing organisation collaboration and individual research cooperation), noun phrase co-occurrence clusters (discovering hot research topics), and the global main path analyses of citation networks (tracking the trajectory of knowledge flows). Ultimately, our results contribute to recent bibliometric paradigms beyond discovering the role of scientific papers and patents in promoting science and technology integration. [ABSTRACT FROM AUTHOR]

In a project to preserve photographic archives in Southeast Asia, the authors sought to develop sustainable solutions with low environmental impact, avoiding air conditioning and using locally available materials. Dry cabinets were tested and implemented to store a glass plate negative collection that was rehoused in envelopes and boxes made locally. The project took just over a year to complete, and two years of monitoring environmental conditions have shown that relative humidity can be stabilized at low levels. However, the dry cabinets are airtight to limit the introduction of moisture and dust, preventing air exchange. In order to avoid the build-up of degradation by-products released by the stored materials, and in particular off-gassing of acetic acid from the cellulose acetate-based photographs, the use of an adsorbent is necessary. To achieve this, a cellulose-based composite with particles of a porous hybrid inorganic/ organic solid, denoted as a metal–organic framework (MOF), at a very high loading over 70% by weight and shaped as a sheet of paper, has been prepared and tested. This special paper maintains acetic acid-free air in the cabinets and also helps to reduce the energy consumption by reducing the need for cool storage. This MOF paper composite traps small carboxylic acids and was found to be an appropriate solution for maintaining clean air in the dry cabinets or any other confined space or enclosure. Additionally, it can also be designed to trap other noxious pollutants such as hydrogen sulfide or formaldehyde, by choosing other MOFs. [ABSTRACT FROM AUTHOR]

This paper discusses the relevance of using physical situations to introduce the concept of angles at elementary school. We compare the effectiveness of two geometry teaching sequences. In the first one (physical sequence), the pupils learned the angle concept by experimenting on the playground (i.e. mesospace) and then modelling the situation. In the second one (paper-and-pencil sequence), the pupils worked solely in the space of a sheet of paper (i.e. microspace). In both sequences, pupils compared areas of space delineated by an angle between two directions. Pupils in two Grade 3 classes were exposed to one of the two teaching sequences. The unfolding of these sequences was videotaped and analyzed, and the pupils were tested individually, before and after teaching, to measure each sequence's effectiveness. Results showed that both sequences are effective to grasp the angle concept: Most pupils overcame the common erroneous conception of comparing angles' sides' lengths instead of angle openness. The comparison of areas of space delineated by an angle between two infinite directions, which is the two sequences' common core, seems to be the key factor underlying angle conceptualization. This paper ends with a discussion of these results' teaching implications and the merits of each sequence. [ABSTRACT FROM AUTHOR]

In his paper "The Psychogenesis of a Case of Homosexuality in a Woman" (1920), Freud tried to outline a general psychoanalytic approach to homosexuality by recounting the case of an 18-year-old girl sent to him by her father. The case, as told by Freud, makes for awkward reading today. Loewald's theory of developmental narrative, differentiation, linking, and his notion of parricide as the individual giving voice to one's self, offers a different lens through which to view it. Although Loewald did not write directly about the issue of homosexuality, in boys or girls, in "The Waning of the Oedipus Complex" he gives voice to the inner processes of separation and linking from parents, leading to mourning, through which the adolescent has to go. In this paper, I offer a reading of the Freud case using Loewald's theory, which enables us to highlight homosexuality as a variation in the expression of human sexuality, rather than a pathological deviation as Freud implies, and presents the "unknown woman" as struggling with difficulties in mourning. [ABSTRACT FROM AUTHOR]

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

The main objective of this work was to explore the prospects of producing pulp and paper from leftover lignocellulosic fibers. In this study discarded Cocos nucifera fibers were collected from an abandoned site and were washed thoroughly. FTIR analysis, chemical composition and fiber morphology studies were conducted. FTIR showed the presence of holocellulose and lignin in the fibers. Chemical analysis showed the holocellulose content as 37.8 wt%. Fiber length, fiber diameter, lumen diameter and cell wall thickness were observed using microscope and derived fiber indices that determine the possibility of producing paper were evaluated. The derived indices such as Runkel index, slenderness ratio, co-efficient of rigidity, flexibility coefficient, Luce’s shape factor and Solids factor of the fibers were evaluated as 67.9%, 44.11, 58.83%, 0.199, 0.49 and 278.53x10³ respectively. All these indices are in good agreement with fibers recommended and used for pulp and paper production. High lignin content present in the fibers is a limitation and it can be removed through appropriate delignification techniques. Thus the study showed that discarded fibers can be used for producing pulp, paper and allied products. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The alarming global deforestation rate has great impacts on the output of the Pulp and paper Industry since wood is the principal papermaking fiber material. Although, generally, bamboo is an alternative cellulolytic fiber source, the species and culm age have great effects on its papermaking potential. Based on the methods by the International Association of Wood Anatomists (IAWA), this work assessed the characteristics of fibers from the axial culm sections of six-month plantation-grown Oxythenantera abyssinica and Beema bamboo (which was cloned from Bambusa balcoaa) for paper production. The lengths of the fibers ranged from 1.89 to 2.39 mm while the diameters were 0.025–0.031 mm. The fiber lumen diameter and wall thickness were 0.014–0.018 mm and 0.004–0.006 mm, respectively. Fibers from the species had their runkle ratios below 1, slenderness ratios above 70 and flexibility ratios above 50. These characteristics compare well with the recommendations for fibers often used for the production of packaging, writing and printing papers. Establishment of plantations of Beema bamboo and O. abyssinica is encouraged as they will serve as good raw material base for the paper industry within six months of planting. Additionally, their planting will contribute to meeting Sustainable Development Goals 1 and 13. [ABSTRACT FROM AUTHOR]

Transforming Pulp and Paper (P&P) mills into Integrated Forest Biorefineries (IFBR) is a prominent solution to save Canadian P&P industry that has been facing decline of conventional paper demand. We propose a comprehensive decision model for the design of IFBR value chains by taking the uncertain demand of bioproducts into consideration. In particular, we propose a multi-stage stochastic programming model to obtain the optimal investment plan over a long-term planning horizon in the presence of various market trends. We also develop a Monte-Carlo simulation platform to validate the proposed model and to compare its performance with alternative decision models. The model is applied to a realistic case study inspired from P&P companies in Canada, where the value of incorporating the dynamic nature of uncertain demand has been estimated. Further, we elaborate on the value of considering flexibility in terms of adjusting the investment plan in response to changes in the demand. Our results indicate that the demand for bioproducts has a substantial impact on the profitability of the IFBR. We also demonstrated the significant value of explicitly incorporating the uncertainty in IFBR network design as well as adapting the investment plan to the changes in the demand. [ABSTRACT FROM AUTHOR]

This study sought to appraise 7-year and 9-year-old Cedrela odorata for pulp and paper making. Sectioning and maceration processes were adopted. Data were subjected to statistical analysis using SPSS version 17.00. Cell characteristics for all ages and tree positions appeared similar but quantitatively, cells in 9-year-old generally exhibited some significant (p < .05) variations. Age and wood position generally had some significant influence on cell characteristics. Fibre lengths were generally short (<1.6 mm or 1600 µm) with variations in fibre morphology being significant axially than radially. In appraising the wood for paper production, derived fibre indices/values viz; Runkel ratio (ranging from 0.19 to 0.28), flexibility coefficient (ranging from 0.78 to 0.83), and slenderness ratio (ranging from 38.98 to 51.72) appeared to provide some positive indications. The species therefore, has potential for pulp and paper production, but further studies on its chemical consumption levels and other properties need to be ascertained towards a well-informed decision. [ABSTRACT FROM AUTHOR]

This study seeks to profile the shoppers' propensity to reuse shopping bags and the type of shopping bags they reuse on the basis of demographics. The study used an observation method to record the consumers' shopping habits and a short questionnaire to record the participants' demographics. A binary regression analysis and a multinomial regression analysis were used to analyse data. The results indicated that the mature aged, women, and low income shoppers were more likely to practice reuse of plastic shopping bags than their respective counterparts. There were no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and low income shoppers compared to high income shoppers using cotton bags than plastic bags. There were also no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and male shoppers compared to female shoppers using paper bags than plastic bags. However, the results indicated a statically significant result in how males compared to females differed in their using of cotton bags than plastic bags and a statistically significant result in how low income shoppers compared to high income shoppers differed in their use of paper bags than plastic bags. [ABSTRACT FROM AUTHOR]

Research by the paper industry into new materials to expand the raw material base for pulp is on the ascendancy due to growing demand for pulp and paper products. This study assessed the anatomical, chemical, and pulping characteristics of four varieties of Cocos nucifera husk to ascertain their suitability as raw material for pulp and paper production. The measured and calculated chemical (Klason Lignin, 1% NaOH solubility and Holocellulose contents) and anatomical (Fiber dimensions, Runkel Ratio, Slenderness Ratio, Flexibility Coefficient, Coefficient of Rigidity, Luce's Shape Factor and Solids Factor) properties of the Cocos nucifera husks mostly did not meet the standard requirements for a good pulp and paper material. However, the Local Tall Yellow variety of the Cocos nucifera husk was favorable in terms of Runkel Ratio, Slenderness Ratio, Flexibility Coefficient, and Coefficient of Rigidity and can be considered for the production of pulp for writing and printing papers. In spite of the limitations of the other three varieties for making quality paper, they could be used for fiber plate, rigid cardboard, and cardboard production. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic had an exceptionally long and consequential rally effect in China. Drawing on an eight-wave nationwide survey, this article shows that the Wuhan lockdown boosted public confidence in the central government. The persistence of the pandemic and the initial success of the zero-COVID policy sustained the enhanced trust in the central government for over two years. However, the rally effect did not dissipate as quietly as usual. As trust in the central government returned to the pre-pandemic level following the Shanghai lockdown, defiant protests collectively known as the White Paper Movement broke out. Angry protesters demanded the termination of the zero-COVID policy and called for accountability from the ruling party and its top leader. This article argues that while the rally effect lasted exceptionally long in the authoritarian country, it could not be prolonged indefinitely. Ultimately, the dissonance between the declining trust in the central government and the persisting restrictive measures provoked the protests. [ABSTRACT FROM AUTHOR]